Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2405.10226 · Science Advances

Geometric phase amplification in a clock interferometer for enhanced metrology

Zhifan Zhou, Sebastian Camilo Carrasco, Christian Sanner, Vladimir S. Malinovsky, R. Folman

Published Apr 30, 2025• 10 citations
arXivHTMLPDF

Abstract

High-precision measurements are crucial for testing the fundamental laws of nature and advancing the technological frontier. Clock interferometry, where particles with an internal clock are coherently split and recombined along two spatial paths, has sparked interest due to its fundamental implications, especially at the intersection of quantum mechanics and general relativity. Here, we demonstrate that a clock interferometer provides metrological improvement compared to its technical noise-limited counterpart using a single internal quantum state. This enhancement around a critical working point can be interpreted as a geometric phase-induced signal-to-noise ratio gain. In our experimental setup, we infer a sensitivity enhancement of 8.8 decibels when measuring a small difference between external fields. We estimate that tens of decibels of sensitivity enhancement could be attained for measurements with a higher atom flux. This opens the door to developing a superior probe for fundamental physics and a high-performance sensor for various technological applications.

DOI
10.1126/sciadv.adr6893

Related papers

Noncyclic geometric phase in three-level Ramsey interferometry for enhanced metrology

Zhifan Zhou, Yaxin Li

In a standard two-level Ramsey interferometer, the accumulated signal phase is linearly mapped to the readout phase. Here, we introduce three-level Ramsey interferometry, in which projected interference between internal paths reshapes this mapping through a noncyclic geometric phase response. Near a geodesic-closure transition, a small accumulated signal phase produces a sharply amplified readout-phase shift. We quantify the accompanying gain--visibility tradeoff and identify a finite operating window in which the amplified response can yield a net signal-to-noise-ratio gain in the presence of additional technical phase noise. A controllable Ramsey phase offset further positions this high-slope response at a chosen operating point, making the local enhancement accessible without requiring a large signal-induced phase. More broadly, these results establish a multilevel Ramsey route to enhanced phase sensitivity in quantum platforms, in which two signal-collecting internal paths interfere to produce a controllable noncyclic geometric response.

quant-pharXiv:2606.18443•Jun 18, 2026•0 citations

Enhancement of the phase-measurement sensitivity beyond the standard quantum limit by a nonlinear interferometer

Z. Y. Ou

A nonlinear interferometer uses nonlinear elements as beam splitters to split and to recombine optical waves for interference. As a result, the interference fringe size has a nonlinear dependence on the intensity of the field for phase sensing and leads to an enhanced phase signal. In this paper, a practical scheme of nonlinear interferometry for precision phase measurement is analyzed with parametric amplifiers as the nonlinear beam splitters. It is found that the signal due to phase shift is enhanced by a factor of the amplification gain as compared to a linear interferometer with the same phase-sensing light intensity while the quantum noise is kept at the vacuum level, thus, effectively increasing the signal-to-noise ratio (SNR) beyond the standard quantum limit. Furthermore, the scheme is not as sensitive to the detection loss as the linear scheme with a squeezed state for noise reduction. However, losses inside the interferometer limit the enhancement factor in SNR. We apply the concept to a Michelson interferometer but with parametric amplifiers involved for gravitational-wave detection. We find that effective power is increased by the gain of the amplifiers without actually increasing the cycling power inside the interferometer. Furthermore, the full benefits with squeezed input and variational output or the combination of a quantum nondemolition interferometer for sensitivity beyond the standard quantum limit apply here with even better results. Such a nonlinear interferometer will find wide applications in precision measurements.

Physical Review A•Feb 14, 2012•191 citations

Fundamental limits of quantum sensors for gravitational wave detection

S. Gaudio

Abstract Recent advances in quantum sensing—optical clocks at 5.5 × 10 − 19 systematic uncertainty, frequency-dependent squeezing below the standard quantum limit, quantum magnetometers approaching fundamental sensitivity limits—raise a natural question: can these technologies detect gravitational waves directly, or enhance existing detectors beyond current capabilities? We show that the answer is primarily determined by the coupling mechanism between the gravitational wave and the sensor. Starting from the tidal Hamiltonian in Fermi normal coordinates, we identify three physically distinct mechanisms by which a gravitational wave couples directly to a quantum system, and derive their transducer gains within linearized general relativity and non-relativistic quantum mechanics. Internal atomic coupling (tidal distortion of electronic wavefunctions) yields a transducer gain G A = 2.4 × 10 − 20 , with vanishing first-order energy shifts for all J = 0 clock states—a ∼ 10 35 deficit relative to laser interferometry that exceeds any projected quantum enhancement. Center-of-mass coupling (Doppler shifts from geodesic motion) reaches strain sensitivities of ∼ 10 − 18 , still 10 4 above LISA requirements. Light propagation coupling (phase accumulation over macroscopic baselines) provides the enormous transducer gain that makes laser interferometry—and atom interferometry—viable. For detectors exploiting this third mechanism, we quantify how much improvement quantum sensors can provide through the detector’s noise architecture: LISA’s noise budget is predominantly classical, limiting combined quantum enhancement to E ≈ 1.04 , while ground-based detectors in the shot-noise-dominated regime achieve E = 1.6 – 2.1 . Atom interferometers exploit the same light-propagation mechanism to target the 0.01–10 Hz band between the LISA and LIGO ranges.

arXiv:2603.06772•Classical and Quantum Gravity•Aug 3, 2026•3 citations

An application of quantum metrology: enhanced correlated interferometry

Siva T. Pradyumna

Quantum metrology is a research field that deals with enhancing the resolution or sensing capabilities of a system which is otherwise constrained by classical limits.Improvements in measurements have historically led to new scientific discoveries, the recent example being the gravitational wave detection.Thus, quantum metrology could be an avenue for enabling scientific breakthroughs.In the present thesis, I have reported a first feasibility test of quantum enhanced correlated phase interferometry.A result that, on one other hand, paves the way for developing a new field of quantum metrology and on the other hand, could be applied to the detection of fundamental stochastic noises such as Holographic noise, gravitational wave background or traces of primordial black holes.The experiment was performed injecting two types of quantum states, namely the squeezed states and a twin-beam like state, in a system consisting of two co-located power recycled Michelson interferometers.When two independent squeezed states were injected, we were able in detecting a faint test correlated phase signal with an amplitude several orders of magnitude below the shot noise limited sensitivity of a single interferometer.The joint sensitivity obtained for the double interferometric system with squeezed states injected was (3.21 ± 0.16) × 10 -17 m √ Hz around 13.5 MHz, in a few seconds of measurement time.The second phase of the experiment involved the injection of a bipartite quantum correlated state in the two interferometers.In this case, we have demonstrated a quantum advantage in detecting uncorrelated noise or difference in the two interferometers' signals enabled by the reduction of the noise in the output photo-current subtraction.

•Jun 14, 2019•0 citations

Gravitational Redshift in Quantum-Clock Interferometry

Albert Roura

The creation of delocalized coherent superpositions of quantum systems experiencing different relativistic effects is an important milestone in future research at the interface of gravity and quantum mechanics.This milestone could be achieved by generating a superposition of quantum clocks that follow paths with different gravitational time dilation and investigating the consequences on the interference signal when they are eventually recombined.Light-pulse atom interferometry with elements employed in optical atomic clocks is a promising candidate for that purpose, but it suffers from major challenges including its insensitivity to the gravitational redshift in a uniform field.All of these difficulties can be overcome with the novel scheme presented here, which is based on initializing the clock when the spatially separate superposition has already been generated and performing a doubly differential measurement where the differential phase shift between the two internal states is compared for different initialization times.This scheme can be exploited to test the universality of the gravitational redshift with delocalized coherent superpositions of quantum clocks, and it is argued that its experimental implementation should be feasible with a new generation of 10-meter atomic fountains that will soon become available.Interestingly, the approach also offers significant advantages for more compact setups based on guided interferometry or hybrid configurations.Furthermore, in order to provide a solid foundation for the analysis of the various interferometry schemes and the effects that can be measured with them, a general formalism for a relativistic description of atom interferometry in curved spacetime is developed.It can describe freely falling atoms as well as the effects of external forces and guiding potentials, and it can be applied to a very wide range of situations.As an important ingredient for quantum-clock interferometry, suitable diffraction mechanisms for atoms in internal-state superpositions are investigated too.Finally, the relation of the proposed doubly differential measurement scheme to other experimental approaches and to tests of the universality of free fall is discussed in detail.

arXiv:1810.06744•Physical Review X•Apr 20, 2020•108 citations

Enhancing Dynamic Range of Sub-Standard-Quantum-Limit Measurements via Quantum Deamplification

Qi Liu, Ming Xue, Matthew Radzihovsky +4 more

Balancing high sensitivity with a broad dynamic range is a fundamental challenge in measurement science, as improving one often compromises the other. While traditional quantum metrology has prioritized enhancing local sensitivity, a large dynamic range is crucial for applications such as atomic clocks, where extended phase interrogation times contribute to wider phase range. In this Letter, we introduce a novel quantum deamplification mechanism that extends dynamic range at a minimal cost of sensitivity. Our approach uses two sequential spin-squeezing operations to generate and detect an entangled probe state, respectively. We demonstrate that the optimal quantum interferometer limit can be approached through two-axis countertwisting dynamics. Further expansion of dynamic range is possible by using sequential quantum deamplification interspersed with phase encoding processes. Additionally, we show that robustness against detection noise can be enhanced by a hybrid sensing scheme that combines quantum deamplification with quantum amplification. Our protocol is within the reach of state-of-the-art atomic-molecular-optical platforms, offering a scalable, noise-resilient pathway for entanglement-enhanced metrology.

arXiv:2412.15061•Physical Review Letters•Jun 23, 2025•9 citations
High-precision measurements are crucial for testing the fundamental laws of nature and advancing the technological frontier. Clock interferometry, where particles with an internal clock are coherently split and recombined along two spatial paths, has sparked interest due to its fundamental implications, especially at the intersection of quantum mechanics and general relativity. Here, we demonstrate that a clock interferometer provides metrological improvement compared to its technical noise-limited counterpart using a single internal quantum state. This enhancement around a critical working point can be interpreted as a geometric phase-induced signal-to-noise ratio gain. In our experimental setup, we infer a sensitivity enhancement of 8.8 decibels when measuring a small difference between external fields. We estimate that tens of decibels of sensitivity enhancement could be attained for measurements with a higher atom flux. This opens the door to developing a superior probe for fundamental physics and a high-performance sensor for various technological applications.
In a standard two-level Ramsey interferometer, the accumulated signal phase is linearly mapped to the readout phase. Here, we introduce three-level Ramsey interferometry, in which projected interference between internal paths reshapes this mapping through a noncyclic geometric phase response. Near a geodesic-closure transition, a small accumulated signal phase produces a sharply amplified readout-phase shift. We quantify the accompanying gain--visibility tradeoff and identify a finite operating window in which the amplified response can yield a net signal-to-noise-ratio gain in the presence of additional technical phase noise. A controllable Ramsey phase offset further positions this high-slope response at a chosen operating point, making the local enhancement accessible without requiring a large signal-induced phase. More broadly, these results establish a multilevel Ramsey route to enhanced phase sensitivity in quantum platforms, in which two signal-collecting internal paths interfere to produce a controllable noncyclic geometric response.
A nonlinear interferometer uses nonlinear elements as beam splitters to split and to recombine optical waves for interference. As a result, the interference fringe size has a nonlinear dependence on the intensity of the field for phase sensing and leads to an enhanced phase signal. In this paper, a practical scheme of nonlinear interferometry for precision phase measurement is analyzed with parametric amplifiers as the nonlinear beam splitters. It is found that the signal due to phase shift is enhanced by a factor of the amplification gain as compared to a linear interferometer with the same phase-sensing light intensity while the quantum noise is kept at the vacuum level, thus, effectively increasing the signal-to-noise ratio (SNR) beyond the standard quantum limit. Furthermore, the scheme is not as sensitive to the detection loss as the linear scheme with a squeezed state for noise reduction. However, losses inside the interferometer limit the enhancement factor in SNR. We apply the concept to a Michelson interferometer but with parametric amplifiers involved for gravitational-wave detection. We find that effective power is increased by the gain of the amplifiers without actually increasing the cycling power inside the interferometer. Furthermore, the full benefits with squeezed input and variational output or the combination of a quantum nondemolition interferometer for sensitivity beyond the standard quantum limit apply here with even better results. Such a nonlinear interferometer will find wide applications in precision measurements.
Abstract Recent advances in quantum sensing—optical clocks at 5.5 × 10 − 19 systematic uncertainty, frequency-dependent squeezing below the standard quantum limit, quantum magnetometers approaching fundamental sensitivity limits—raise a natural question: can these technologies detect gravitational waves directly, or enhance existing detectors beyond current capabilities? We show that the answer is primarily determined by the coupling mechanism between the gravitational wave and the sensor. Starting from the tidal Hamiltonian in Fermi normal coordinates, we identify three physically distinct mechanisms by which a gravitational wave couples directly to a quantum system, and derive their transducer gains within linearized general relativity and non-relativistic quantum mechanics. Internal atomic coupling (tidal distortion of electronic wavefunctions) yields a transducer gain G A = 2.4 × 10 − 20 , with vanishing first-order energy shifts for all J = 0 clock states—a ∼ 10 35 deficit relative to laser interferometry that exceeds any projected quantum enhancement. Center-of-mass coupling (Doppler shifts from geodesic motion) reaches strain sensitivities of ∼ 10 − 18 , still 10 4 above LISA requirements. Light propagation coupling (phase accumulation over macroscopic baselines) provides the enormous transducer gain that makes laser interferometry—and atom interferometry—viable. For detectors exploiting this third mechanism, we quantify how much improvement quantum sensors can provide through the detector’s noise architecture: LISA’s noise budget is predominantly classical, limiting combined quantum enhancement to E ≈ 1.04 , while ground-based detectors in the shot-noise-dominated regime achieve E = 1.6 – 2.1 . Atom interferometers exploit the same light-propagation mechanism to target the 0.01–10 Hz band between the LISA and LIGO ranges.
Quantum metrology is a research field that deals with enhancing the resolution or sensing capabilities of a system which is otherwise constrained by classical limits.Improvements in measurements have historically led to new scientific discoveries, the recent example being the gravitational wave detection.Thus, quantum metrology could be an avenue for enabling scientific breakthroughs.In the present thesis, I have reported a first feasibility test of quantum enhanced correlated phase interferometry.A result that, on one other hand, paves the way for developing a new field of quantum metrology and on the other hand, could be applied to the detection of fundamental stochastic noises such as Holographic noise, gravitational wave background or traces of primordial black holes.The experiment was performed injecting two types of quantum states, namely the squeezed states and a twin-beam like state, in a system consisting of two co-located power recycled Michelson interferometers.When two independent squeezed states were injected, we were able in detecting a faint test correlated phase signal with an amplitude several orders of magnitude below the shot noise limited sensitivity of a single interferometer.The joint sensitivity obtained for the double interferometric system with squeezed states injected was (3.21 ± 0.16) × 10 -17 m √ Hz around 13.5 MHz, in a few seconds of measurement time.The second phase of the experiment involved the injection of a bipartite quantum correlated state in the two interferometers.In this case, we have demonstrated a quantum advantage in detecting uncorrelated noise or difference in the two interferometers' signals enabled by the reduction of the noise in the output photo-current subtraction.
The creation of delocalized coherent superpositions of quantum systems experiencing different relativistic effects is an important milestone in future research at the interface of gravity and quantum mechanics.This milestone could be achieved by generating a superposition of quantum clocks that follow paths with different gravitational time dilation and investigating the consequences on the interference signal when they are eventually recombined.Light-pulse atom interferometry with elements employed in optical atomic clocks is a promising candidate for that purpose, but it suffers from major challenges including its insensitivity to the gravitational redshift in a uniform field.All of these difficulties can be overcome with the novel scheme presented here, which is based on initializing the clock when the spatially separate superposition has already been generated and performing a doubly differential measurement where the differential phase shift between the two internal states is compared for different initialization times.This scheme can be exploited to test the universality of the gravitational redshift with delocalized coherent superpositions of quantum clocks, and it is argued that its experimental implementation should be feasible with a new generation of 10-meter atomic fountains that will soon become available.Interestingly, the approach also offers significant advantages for more compact setups based on guided interferometry or hybrid configurations.Furthermore, in order to provide a solid foundation for the analysis of the various interferometry schemes and the effects that can be measured with them, a general formalism for a relativistic description of atom interferometry in curved spacetime is developed.It can describe freely falling atoms as well as the effects of external forces and guiding potentials, and it can be applied to a very wide range of situations.As an important ingredient for quantum-clock interferometry, suitable diffraction mechanisms for atoms in internal-state superpositions are investigated too.Finally, the relation of the proposed doubly differential measurement scheme to other experimental approaches and to tests of the universality of free fall is discussed in detail.
Balancing high sensitivity with a broad dynamic range is a fundamental challenge in measurement science, as improving one often compromises the other. While traditional quantum metrology has prioritized enhancing local sensitivity, a large dynamic range is crucial for applications such as atomic clocks, where extended phase interrogation times contribute to wider phase range. In this Letter, we introduce a novel quantum deamplification mechanism that extends dynamic range at a minimal cost of sensitivity. Our approach uses two sequential spin-squeezing operations to generate and detect an entangled probe state, respectively. We demonstrate that the optimal quantum interferometer limit can be approached through two-axis countertwisting dynamics. Further expansion of dynamic range is possible by using sequential quantum deamplification interspersed with phase encoding processes. Additionally, we show that robustness against detection noise can be enhanced by a hybrid sensing scheme that combines quantum deamplification with quantum amplification. Our protocol is within the reach of state-of-the-art atomic-molecular-optical platforms, offering a scalable, noise-resilient pathway for entanglement-enhanced metrology.