Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2404.04081 · Physical Review Applied

Clock-offset recovery with sublinear complexity enables synchronization on low-level hardware for quantum key distribution

Jan Krause, Nino Walenta, Jonas Hilt, Ronald E. Freund

Published Apr 7, 2025• 11 citations
arXivHTMLPDF

Abstract

We introduce iQSync, a clock-offset recovery method designed for implementation on low-level hardware, such as field-programmable gate arrays or microcontrollers, for quantum key distribution (QKD). iQSync requires minimal memory, only a simple instruction set (e.g., no floating-point operations), and can be evaluated with sublinear time complexity, typically involving no more than a few thousand iterations of a simple loop. Furthermore, iQSync allows for a precise clock-offset recovery within a few seconds, even for large offsets, and is well suited for scenarios with high channel loss and low signal-to-noise ratio, irrespective of the prepare-and-measure QKD protocol used. We implemented the method on our QKD platform, demonstrating its performance and conformity with analytically derived success probabilities for channel attenuations exceeding 70 dB .

DOI
10.1103/physrevapplied.23.044015

Related papers

Fast and Simple Qubit-Based Synchronization for Quantum Key Distribution

Luca Calderaro, Andrea Stanco, Costantino Agnesi +4 more

We propose Qubit4Sync, a synchronization method for quantum-key-distribution (QKD) setups, based on the same qubits exchanged during the protocol and without requiring additional hardware other than that necessary to prepare and measure the quantum states, in a similar fashion to the clock recovery used in classical communications. Our approach introduces a cross-correlation algorithm with low computational complexity for high channel losses. We test the robustness of our scheme in a real QKD implementation, and we believe it may find application in other quantum communication protocols.

arXiv:1909.12050•Physical Review Applied•May 18, 2020•95 citations

Analytical Model of Clock Drift in Quantum Key Distribution and a Simple Synchronization Algorithm

Loïc Millet, Boris Korzh, Rob Thew +1 more

Clock synchronization is critical for maintaining low error rates in quantum key distribution. Here, we describe how a frequency mismatch between the transmitter and receiver clocks affects the quantum bit error rate in quantum key distribution, and derive from this model a simple synchronization algorithm together with clock stability requirements for practical operation. Our algorithm continuously compensates for both frequency mismatch and time-offset fluctuations directly from detection timestamps. It does not require a dedicated synchronization channel or auxiliary qubit sequence, converges from a large frequency mismatch within approximately one second of photon acquisition, and remains effective in low-photon-count regimes (more than 30 dB of channel loss) using standard hardware. We validate our approach by demonstrating successful key exchange over 100 km of fiber and continuous operation over 24 hours in a 16 km metropolitan network using commercial systems, with performance equivalent to using a service channel for clock synchronization.

quant-pharXiv:2605.26705•Physical Review Applied•May 27, 2026•0 citations

Fast qubit-based frequency-recovery algorithm for quantum key distribution

Feng-Yu Lu, Zheng-Kai Huang, Chi Zhang +6 more

Clock synchronization serves as a foundational subsystem in quantum key distribution (QKD). The recently proposed Qubit-based synchronization (Qubit4Sync) has opportunities in eliminating additional cost, noise, and potential side channels. It offers a promising alternative to dedicated synchronization hardware. However, the current frequency recovery process in Qubit4Sync requires high data throughput and computational speed, limiting practical use. To overcome these issues, we developed a fast frequency recovery algorithm that increases the recovery rate by orders of magnitude and remains robust under bad signal-to-noise ratio (SNR). This enables Qubit4Sync to operate effectively in mainstream gated-mode QKD systems. We further establish a theoretical model for frequency recovery, showing that our algorithm is robust against disturbances like dead time, jitter, and afterpulse. A frequency-domain SNR calculation method is also provided to guide parameter design for specific experimental conditions. This work opens the door to practical Qubit4Sync deployment in general QKD systems.

arXiv:2509.17849•Physical Review Applied•Dec 3, 2025•2 citations

Pilot-free digital clock synchronization for continuous-variable quantum key distribution

Patrick Matalla, M. S. Mahmud, Christian G. Koos +1 more

A feedforward blind digital clock synchronization method is investigated for continuousvariable quantum-key distribution. We demonstrate timing synchronization for an 1-GBd QPSK signal over a 20 km quantum channel at signal-to-noise ratios as low as -20 dB and various clock frequency offsets.

IET conference proceedings.•Nov 13, 2023•3 citations

Qubit-Based Distributed Frame Synchronization for Quantum Key Distribution

Ye Chen, Chunfeng Huang, Guangshen Lin +3 more

Quantum key distribution (QKD) is a method that enables two remote parties to share a secure key string. Clock synchronization between two parties is a crucial step in the normal operation of QKD. Qubit-based synchronization can achieve clock synchronization by transmitting quantum states between two remote parties, eliminating the necessity for hardware synchronization and thereby greatly reducing the hardware requirements of a QKD system. Nonetheless, classical qubit-based synchronization exhibits poor performance in continuous and high-loss systems, hindering its wide applicability in various scenarios. Here, we propose a qubit-based distributed frame synchronization method that can achieve time recovery in a continuously running system and resist higher losses. Experimental results show that the proposed method outperforms the advanced qubit-based synchronization method Qubit4Sync in a continuously running system. Particularly, the results demonstrate that our method surpasses all previous works in key parameters, including frequency and the synchronization length. We believe our method is applicable to a broad range of QKD scenarios, including drone-based QKD and quantum network construction.

arXiv:2308.13154•Journal of Lightwave Technology•Sep 19, 2024•16 citations

Synchronization using quantum photons for satellite-to-ground quantum key distribution

Chao-Ze Wang, Yang Li, Wenqi Cai +3 more

Time synchronization is crucial for quantum key distribution (QKD) systems. In order to compensate for the time drift caused by the Doppler effect and adapt to the unstable optical link in satellite-to-ground QKD, previous demonstrations generally adopted synchronization methods requiring additional hardware. In this paper, we present a novel synchronization method based on the detected quantum photons, thus simplifying additional hardware and reducing the complexity and cost. This method adopts target frequency scanning to realize fast frequency recovery, utilizes polynomial fitting to compensate for the Doppler effect, and takes use of the vacuum state in the decoy-state BB84 protocol to recover the time offset. This method can avoid the influence of synchronization light jitter, thus improving the synchronization precision and the secure keys as well. Successful satellite-to-ground QKD based on this new synchronization scheme has been conducted to demonstrate its feasibility and performance. The presented scheme provides an effective synchronization solution for quantum communication applications.

Optics Express•Aug 23, 2021•32 citations
We introduce iQSync, a clock-offset recovery method designed for implementation on low-level hardware, such as field-programmable gate arrays or microcontrollers, for quantum key distribution (QKD). iQSync requires minimal memory, only a simple instruction set (e.g., no floating-point operations), and can be evaluated with sublinear time complexity, typically involving no more than a few thousand iterations of a simple loop. Furthermore, iQSync allows for a precise clock-offset recovery within a few seconds, even for large offsets, and is well suited for scenarios with high channel loss and low signal-to-noise ratio, irrespective of the prepare-and-measure QKD protocol used. We implemented the method on our QKD platform, demonstrating its performance and conformity with analytically derived success probabilities for channel attenuations exceeding 70 dB .
We propose Qubit4Sync, a synchronization method for quantum-key-distribution (QKD) setups, based on the same qubits exchanged during the protocol and without requiring additional hardware other than that necessary to prepare and measure the quantum states, in a similar fashion to the clock recovery used in classical communications. Our approach introduces a cross-correlation algorithm with low computational complexity for high channel losses. We test the robustness of our scheme in a real QKD implementation, and we believe it may find application in other quantum communication protocols.
Clock synchronization is critical for maintaining low error rates in quantum key distribution. Here, we describe how a frequency mismatch between the transmitter and receiver clocks affects the quantum bit error rate in quantum key distribution, and derive from this model a simple synchronization algorithm together with clock stability requirements for practical operation. Our algorithm continuously compensates for both frequency mismatch and time-offset fluctuations directly from detection timestamps. It does not require a dedicated synchronization channel or auxiliary qubit sequence, converges from a large frequency mismatch within approximately one second of photon acquisition, and remains effective in low-photon-count regimes (more than 30 dB of channel loss) using standard hardware. We validate our approach by demonstrating successful key exchange over 100 km of fiber and continuous operation over 24 hours in a 16 km metropolitan network using commercial systems, with performance equivalent to using a service channel for clock synchronization.
Clock synchronization serves as a foundational subsystem in quantum key distribution (QKD). The recently proposed Qubit-based synchronization (Qubit4Sync) has opportunities in eliminating additional cost, noise, and potential side channels. It offers a promising alternative to dedicated synchronization hardware. However, the current frequency recovery process in Qubit4Sync requires high data throughput and computational speed, limiting practical use. To overcome these issues, we developed a fast frequency recovery algorithm that increases the recovery rate by orders of magnitude and remains robust under bad signal-to-noise ratio (SNR). This enables Qubit4Sync to operate effectively in mainstream gated-mode QKD systems. We further establish a theoretical model for frequency recovery, showing that our algorithm is robust against disturbances like dead time, jitter, and afterpulse. A frequency-domain SNR calculation method is also provided to guide parameter design for specific experimental conditions. This work opens the door to practical Qubit4Sync deployment in general QKD systems.
Quantum key distribution (QKD) is a method that enables two remote parties to share a secure key string. Clock synchronization between two parties is a crucial step in the normal operation of QKD. Qubit-based synchronization can achieve clock synchronization by transmitting quantum states between two remote parties, eliminating the necessity for hardware synchronization and thereby greatly reducing the hardware requirements of a QKD system. Nonetheless, classical qubit-based synchronization exhibits poor performance in continuous and high-loss systems, hindering its wide applicability in various scenarios. Here, we propose a qubit-based distributed frame synchronization method that can achieve time recovery in a continuously running system and resist higher losses. Experimental results show that the proposed method outperforms the advanced qubit-based synchronization method Qubit4Sync in a continuously running system. Particularly, the results demonstrate that our method surpasses all previous works in key parameters, including frequency and the synchronization length. We believe our method is applicable to a broad range of QKD scenarios, including drone-based QKD and quantum network construction.
Time synchronization is crucial for quantum key distribution (QKD) systems. In order to compensate for the time drift caused by the Doppler effect and adapt to the unstable optical link in satellite-to-ground QKD, previous demonstrations generally adopted synchronization methods requiring additional hardware. In this paper, we present a novel synchronization method based on the detected quantum photons, thus simplifying additional hardware and reducing the complexity and cost. This method adopts target frequency scanning to realize fast frequency recovery, utilizes polynomial fitting to compensate for the Doppler effect, and takes use of the vacuum state in the decoy-state BB84 protocol to recover the time offset. This method can avoid the influence of synchronization light jitter, thus improving the synchronization precision and the secure keys as well. Successful satellite-to-ground QKD based on this new synchronization scheme has been conducted to demonstrate its feasibility and performance. The presented scheme provides an effective synchronization solution for quantum communication applications.