Quantum key distribution (QKD) is a method that enables two remote parties to share a secure key string. Clock synchronization between two parties is a crucial step in the normal operation of QKD. Qubit-based synchronization can achieve clock synchronization by transmitting quantum states between two remote parties, eliminating the necessity for hardware synchronization and thereby greatly reducing the hardware requirements of a QKD system. Nonetheless, classical qubit-based synchronization exhibits poor performance in continuous and high-loss systems, hindering its wide applicability in various scenarios. Here, we propose a qubit-based distributed frame synchronization method that can achieve time recovery in a continuously running system and resist higher losses. Experimental results show that the proposed method outperforms the advanced qubit-based synchronization method Qubit4Sync in a continuously running system. Particularly, the results demonstrate that our method surpasses all previous works in key parameters, including frequency and the synchronization length. We believe our method is applicable to a broad range of QKD scenarios, including drone-based QKD and quantum network construction.
Quantum key distribution (QKD) is a method that enables two remote parties to share a secure key string. Clock synchronization between two parties is a crucial step in the normal operation of QKD. Qubit-based synchronization can achieve clock synchronization by transmitting quantum states between two remote parties, eliminating the necessity for hardware synchronization and thereby greatly reducing the hardware requirements of a QKD system. Nonetheless, classical qubit-based synchronization exhibits poor performance in continuous and high-loss systems, hindering its wide applicability in various scenarios. Here, we propose a qubit-based distributed frame synchronization method that can achieve time recovery in a continuously running system and resist higher losses. Experimental results show that the proposed method outperforms the advanced qubit-based synchronization method Qubit4Sync in a continuously running system. Particularly, the results demonstrate that our method surpasses all previous works in key parameters, including frequency and the synchronization length. We believe our method is applicable to a broad range of QKD scenarios, including drone-based QKD and quantum network construction.
Quantum key distribution (QKD) is a cryptographic technique that uses quantum mechanical principles to enable secure key distribution, offering information-theoretic security guaranteed by physical laws. Practical deployment of QKD requires robust, cost-effective systems that can operate in challenging field environments. A major challenge is achieving reliable clock synchronization without adding hardware complexity. Conventional approaches often use separate classical light signals, which increase costs and introduce noise that degrades quantum channel performance. To address this limitation, we demonstrate a QKD system incorporating a recently proposed qubit-based distributed frame synchronization method, deployed over a metropolitan fiber network in Nanning, China. Using the polarization-encoded one-decoy-state BB84 protocol and the recently proposed qubit-based distributed frame synchronization method, our system achieves synchronization directly from the quantum signal, eliminating the need for dedicated synchronization hardware. Furthermore, to counteract dynamic polarization disturbances in urban fibers, the system integrates qubit-based polarization feedback control, enabling real-time polarization compensation through an automated polarization controller using data recovered from the qubit-based synchronization signals. During 12 hours of continuous operation, the system maintained a low average quantum bit error rate of 1.12 ± 0.48%, achieving a secure key rate of 26.6 kbit/s under 18 dB channel loss. Even under a high channel loss of 40 dB, a finite-key secure rate of 115 bit/s was achieved. This study represents a successful long-term validation of a frame-synchronization-based QKD scheme in a real urban environment, demonstrating exceptional stability and high-loss tolerance, and offering an alternative for building practical, scalable, and cost-efficient quantum-secure communication networks.
Clock synchronization serves as a foundational subsystem in quantum key distribution (QKD). The recently proposed Qubit-based synchronization (Qubit4Sync) has opportunities in eliminating additional cost, noise, and potential side channels. It offers a promising alternative to dedicated synchronization hardware. However, the current frequency recovery process in Qubit4Sync requires high data throughput and computational speed, limiting practical use. To overcome these issues, we developed a fast frequency recovery algorithm that increases the recovery rate by orders of magnitude and remains robust under bad signal-to-noise ratio (SNR). This enables Qubit4Sync to operate effectively in mainstream gated-mode QKD systems. We further establish a theoretical model for frequency recovery, showing that our algorithm is robust against disturbances like dead time, jitter, and afterpulse. A frequency-domain SNR calculation method is also provided to guide parameter design for specific experimental conditions. This work opens the door to practical Qubit4Sync deployment in general QKD systems.
Quantum key distribution (QKD) enables the generation of information-theoretic secure keys between two remote parties. A critical component of successful QKD implementation is the effective synchronization of clocks between these users. Traditional methods of locking to a reference clock or transmitting a synchronization signal rely on auxiliary equipment, which increases the complexity and cost, thus hindering the widespread deployment of QKD. Here, we propose a method to achieve clock and pulse synchronization by exploiting a subset of the transmitted qubits. We demonstrate our scheme with a time-bin phase-coding BB84 QKD system and verify the realization of long-term stable key generation over distances of 50 km and 100 km. Our method simplifies the implementation of QKD systems and introduces new possibilities for synchronization algorithms in other quantum communication protocols.
We propose Qubit4Sync, a synchronization method for quantum-key-distribution (QKD) setups, based on the same qubits exchanged during the protocol and without requiring additional hardware other than that necessary to prepare and measure the quantum states, in a similar fashion to the clock recovery used in classical communications. Our approach introduces a cross-correlation algorithm with low computational complexity for high channel losses. We test the robustness of our scheme in a real QKD implementation, and we believe it may find application in other quantum communication protocols.
Drone-based entanglement distribution provides full spatiotemporal coverage for quantum networks, enabling quantum key distribution (QKD) in dynamic environments. The security of QKD fundamentally depends on high-fidelity quantum state measurements, for which high-precision clock synchronization is indispensable, as timing jitter is inversely correlated with quantum state fidelity. However, drone-based clock synchronization is constrained by SWaP (Size, Weight, and Power) limitations and dynamic mobility effects. Here, we propose a synchronization protocol for drone-based entanglement distribution, leveraging nanosecond-accurate Global Navigation Satellite System (GNSS) timing and entanglement-based timing correction to overcome SWaP constraints. Experimental results demonstrate 24 ps RMS synchronization in simulated free-space quantum channels with distance dynamics, without requiring precision reference clock. Our protocol enables drone-based entanglement distribution, paving the way for seamless wide-area and local-area quantum internet.
Frame synchronization is a crucial step in quantum key distribution (QKD) and a prerequisite for secure key distillation. Due to the extremely low signal-to-noise ratio (SNR) and fast phase drift in the continuous-variable QKD system, efficient frame synchronization is highly demanded. In this paper, a frame-synchronization scheme based on weak coherent states is proposed. This scheme uses a train of coherent-state pulses encoded by a Zadoff-Chu sequence to achieve frame synchronization. The synchronization performance is analyzed under different transmission distances, transmit powers, frequency offsets, and phase drifts through Monte Carlo simulation. Its performance is also compared with other synchronization sequences, confirming its noise-tolerance capability. An optical experiment is conducted to verify the feasibility of the synchronization scheme under low SNR (as low as $\ensuremath{-}20$ dB), and the applicable SNR range can be further reduced by increasing the sequence length. Due to its efficiency and noise tolerance, this scheme can provide technical support for weak-coherent-state-based QKD and future quantum network construction.