Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2404.01623 · The Journal of Chemical Physics

Ab initio extended Hubbard model of short polyenes for efficient quantum computing

Yuichiro Yoshida, Nayuta Takemori, Wataru Mizukami

Published Aug 28, 2024• 7 citations
arXivHTMLPDF

Abstract

We propose introducing an extended Hubbard Hamiltonian derived via the ab initio downfolding method, which was originally formulated for periodic materials, toward efficient quantum computing of molecular electronic structure calculations. By utilizing this method, the first-principles Hamiltonian of chemical systems can be coarse-grained by eliminating the electronic degrees of freedom in higher energy space and reducing the number of terms of electron repulsion integral from O(N4) to O(N2). Our approach is validated numerically on the vertical excitation energies and excitation characters of ethylene, butadiene, and hexatriene. The dynamical electron correlation is incorporated within the framework of the constrained random phase approximation in advance of quantum computations, and the constructed models capture the trend of experimental and high-level quantum chemical calculation results. As expected, the L1-norm of the fermion-to-qubit mapped model Hamiltonians is significantly lower than that of conventional ab initio Hamiltonians, suggesting improved scalability of quantum computing. Those numerical outcomes and the results of the simulation of excited-state sampling demonstrate that the ab initio extended Hubbard Hamiltonian may hold significant potential for quantum chemical calculations using quantum computers.

DOI
10.1063/5.0213525

Related papers

Density-matrix based determination of low-energy model Hamiltonians from ab initio wavefunctions

Hitesh J. Changlani, Huihuo Zheng, Lucas K. Wagner

We propose a way of obtaining effective low energy Hubbard-like model Hamiltonians from ab initio quantum Monte Carlo calculations for molecular and extended systems. The Hamiltonian parameters are fit to best match the ab initio two-body density matrices and energies of the ground and excited states, and thus we refer to the method as ab initio density matrix based downfolding. For benzene (a finite system), we find good agreement with experimentally available energy gaps without using any experimental inputs. For graphene, a two dimensional solid (extended system) with periodic boundary conditions, we find the effective on-site Hubbard U(∗)/t to be 1.3 ± 0.2, comparable to a recent estimate based on the constrained random phase approximation. For molecules, such parameterizations enable calculation of excited states that are usually not accessible within ground state approaches. For solids, the effective Hamiltonian enables large-scale calculations using techniques designed for lattice models.

arXiv:1504.03704•The Journal of Chemical Physics•Aug 4, 2015•35 citations

Compressing Hamiltonians with ab initio downfolding for simulating strongly-correlated materials on quantum computers

Antonios M. Alvertis, Abid Khan, Norm M. Tubman

The accurate first-principles description of strongly correlated materials is an important and challenging problem in condensed matter physics. Ab initio downfolding has emerged as a way of deriving compressed many-body Hamiltonians that maintain the essential physics of strongly correlated materials. The solution of these material-specific models is still exponentially difficult to generate on classical computers, but quantum algorithms allow for a significant speed-up in obtaining the ground states of these compressed Hamiltonians. Here, we demonstrate that using quantum algorithms to obtain the properties of downfolded Hamiltonians can indeed yield high-fidelity solutions. By combining ab initio downfolding and variational quantum eigensolvers, we correctly predict the antiferromagnetic state of one-dimensional cuprate ${\mathrm{Ca}}_{2}{\mathrm{Cu}\mathrm{O}}_{3}$, the excitonic ground state of monolayer ${\mathrm{W}\mathrm{Te}}_{2}$, and the charge-ordered state of correlated metal ${\mathrm{Sr}\mathrm{VO}}_{3}$. Numerical simulations using a classical tensor network implementation of variational quantum eigensolvers allow us to simulate large models with up to 54 qubits and encompassing up to four bands in the correlated subspace, which is indicative of the complexity that our framework can address. Through these methods we demonstrate the potential of classical preoptimization and downfolding techniques for enabling efficient materials simulation using quantum algorithms.

arXiv:2409.12237•Physical Review Applied•Apr 11, 2025•10 citations

Quantum algorithms for electronic structure beyond ground state energies

Emiel Koridon

Quantum chemistry models atoms and molecules using quantum mechanics, with the electronic structure problem at its core. This problem, which determines the energy and properties of electrons in a molecule, is exponentially hard to solve exactly on classical computers. To approximate solutions, effective models introduce layers of simplifications. However, these approximations can fail for strongly correlated systems, necessitating alternative approaches. Quantum computers, capable of processing quantum information natively, offer a promising path to simulate molecular systems beyond classical reach, with potential applications in catalysis, materials science, and photochemistry. Despite rapid advancements in quantum hardware, practical quantum computations remain challenging due to limited resources. This thesis optimizes quantum resource usage in computational chemistry, introducing novel embedding techniques and exploring applications beyond ground-state energies. Chapter 1 establishes the foundation by reviewing quantum chemistry methods, from Hartree-Fock and Density Functional Theory (DFT) to active space approaches. It also provides an introduction to quantum computing for chemistry, focusing on near-term algorithms. The following chapters present novel methods aimed at reducing quantum resource requirements and tackling problems classical methods struggle with. Chapter 2 introduces a technique to reduce the $\lambda$-norm of the electronic structure Hamiltonian, a key measure of quantum resource demand. By transforming molecular orbitals, this method enhances sampling efficiency in Noisy Intermediate-Scale Quantum (NISQ) algorithms and reduces runtime in Fault-Tolerant Quantum Computing (FTQC). Localized orbitals outperform canonical ones, and an orbital-optimization scheme is proposed to minimize the $\lambda$-norm. Benchmarks on hydrogen chains, FeMoco, and Ruthenium complexes demonstrate its effectiveness. Chapter 3 presents the FragPT2 framework for simulating large systems with multiple interacting fragments. This method embeds each fragment in the mean field of others and applies multi-reference perturbation theory to capture inter-fragment correlations such as dispersion and charge transfer efficiently. The approach reduces computational overhead and enables scalable simulations, as shown in applications to \ce{N2} dimers, aromatic dimers, and butadiene. Chapter 4 focuses on photochemical systems, where multiple electronic states must be treated equally. The state-averaged orbital-optimized variational quantum eigensolver (SAOOVQE) is extended with analytical energy gradients and non-adiabatic couplings, enabling geometry optimizations and simulations of non-adiabatic dynamics on quantum hardware. This is demonstrated by locating the conical intersection in formaldimine, highlighting SAOOVQE’s potential for studying photoisomerization in biomolecules. Building on this, Chapter 5 develops a quantum algorithm to detect conical intersections, where the Born-Oppenheimer approximation breaks down. These intersections are characterized by a discrete Berry phase (0 or $\pi$), representing their topological nature. The algorithm extracts this phase as a single bit of information, ensuring resilience to noise. Analytical proof and numerical validation using a toy molecular model illustrate its effectiveness for studying light-perception biochemistry and related photochemical processes. Finally, Chapter 6 explores machine learning density functionals trained on noisy quantum data. While DFT is computationally efficient, its accuracy depends on approximated exchange-correlation functionals. This work proposes a neural network-based approach to learn the exact functional from quantum data, showing that training on noisy outputs from NISQ devices can mitigate sampling errors. Applications to the Fermi-Hubbard model and other systems demonstrate its potential to generalize and provide accurate results under noise. This thesis advances quantum computational chemistry by optimizing quantum resource usage, developing new embedding strategies, and expanding the scope of quantum simulations beyond ground-state properties. These contributions pave the way for practical quantum algorithms that could revolutionize molecular simulations in the near future.

•Apr 4, 2025•0 citations

Quantum Simulation of Molecular Electronic States with a Transcorrelated Hamiltonian: Higher Accuracy with Fewer Qubits

Ashutosh Kumar, Ayush Asthana, Conner Masteran +5 more

Simulation of electronic structure is one of the most promising applications on noisy intermediate-scale quantum (NISQ) era devices. However, NISQ devices suffer from a number of challenges like limited qubit connectivity, short coherence times, and sizable gate error rates. Thus, desired quantum algorithms should require shallow circuit depths and low qubit counts to take advantage of these devices. Here, we attempt to reduce quantum resource requirements for molecular simulations on a quantum computer while maintaining the desired accuracy with the help of classical quantum chemical theories of canonical transformation and explicit correlation. In this work, compact ab initio Hamiltonians are generated classically, in the second quantized form, through an approximate similarity transformation of the Hamiltonian with (a) an explicitly correlated two-body unitary operator with generalized pair excitations that remove the Coulombic electron-electron singularities from the Hamiltonian and (b) a unitary one-body operator to efficiently capture the orbital relaxation effects required for accurate description of the excited states. The resulting transcorrelated Hamiltonians are able to describe both the ground and the excited states of molecular systems in a balanced manner. Using the variational quantum eigensolver (VQE) method based on the unitary coupled cluster with singles and doubles (UCCSD) ansatz and only a minimal basis set (ANO-RCC-MB), we demonstrate that the transcorrelated Hamiltonians can produce ground state energies comparable to the reference CCSD energies with the much larger cc-pVTZ basis set. This leads to a reduction in the number of required CNOT gates by more than 3 orders of magnitude for the chemical species studied in this work. Furthermore, using the quantum equation of motion (qEOM) formalism in conjunction with the transcorrelated Hamiltonian, we are able to reduce the deviations in the excitation energies from the reference EOM-CCSD/cc-pVTZ values by an order of magnitude. The transcorrelated Hamiltonians developed here are Hermitian and contain only one- and two-body interaction terms and thus can be easily combined with any quantum algorithm for accurate electronic structure simulations.

arXiv:2201.09852•Journal of Chemical Theory and Computation•Aug 19, 2022•50 citations

Ab initio quantum simulation of strongly correlated materials with quantum embedding

Changsu Cao, Jinzhao Sun, Xiao Yuan +3 more

Abstract Quantum computing has shown great potential in various quantum chemical applications such as drug discovery, material design, and catalyst optimization. Although significant progress has been made in the quantum simulation of simple molecules, ab initio simulation of solid-state materials on quantum computers is still in its early stage, mostly owing to the fact that the system size quickly becomes prohibitively large when approaching the thermodynamic limit. In this work, we introduce an orbital-based multifragment approach on top of the periodic density matrix embedding theory, resulting in a significantly smaller problem size for the current near-term quantum computer. We demonstrate the accuracy and efficiency of our method compared with the conventional methodologies and experiments on solid-state systems with complex electronic structures. These include spin-polarized states of a hydrogen chain (1D-H), the equation of state of a boron nitride layer (h-BN) as well as the magnetic ordering in nickel oxide (NiO), a prototypical strongly correlated solid. Our results suggest that quantum embedding combined with a chemically intuitive fragmentation can greatly advance quantum simulation of realistic materials, thereby paving the way for solving important yet classically hard industrial problems on near-term quantum devices.

arXiv:2209.03202•npj Computational Materials•May 24, 2023•51 citations

Accelerating Quantum Chemistry through Compressed Hamiltonian Representation and Efficient Quantum Analytic Energy Gradient Algorithms

Oumarou Oumarou

In ab-initio quantum chemistry, solving the electronic structure problem of a molecular system of interest to obtain an approximation of the ground and, in some cases, the excited state energies is a core and central task in various quantum chemistry processes. These include, but certainly not limited to, the calculation of the activation energy–that is the minimal energy required to launch a given chemical reaction–, the dipole and multipole moments which describe the polarity of the molecule, performing the optimization of the geometry of the molecule and searching for transition states. Furthermore, many quantum chemistry applications are predicated, not merely on the approximation of the ground state energy, but also on the corresponding first order derivatives. The body of literature of classical algorithms approximating the ground state energy and its first order derivative is extensively rich with a plethora of methods such as self-consistent mean-field methods, coupled-cluster methods, density matrix renormalization group and many more, each of which has intrinsic set of properties and characteristics that makes it suitable for specific tasks and cases. However, classical methods face a practically insurmountable challenge: the efficient computation of high accuracy approximation of ground state energies of large system sizes. This is fundamentally because the electronic structure problem provably belongs to the complexity class of QMA-hard problems. Which also means that it is out of reach for quantum algorithms as well in general. However, with certain assumptions that are expected to hold molecules of interest–that so far proved to be classically challenging because the required accuracy set by the standard of chemical accuracy threshold (generally held in quantum chemistry)– quantum algorithms can efficiently treat such cases. While originally theorized by Richard Feynmann as a potentially efficient way of simulating some classically intractable many-body systems, quantum computing has since proven to have a stronger and richer potential paving the way for the inception of new algorithms such as Shor’s algorithm for integer factorization, HHL for solving linear system of equation and Grover’s algorithm for constrained binary search, just to name a few. These algorithms provably exhibit an improvement rate that goes respectively exponentially and quadratically in the time complexity. Quantum chemistry is considered a prominent candidate to benefit from quantum computing given the variety of quantum algorithms put forth to solve the electronic structure problem of particular systems of interest. These quantum algorithm proposals can be broadly categorized in three main categories that span the spectrum: from noisy intermediate scale quantum (NISQ) computers to early and full scale fault tolerant quantum ((E)FTQC) computers. Firstly, the variational quantum eigensolver (VQE) family of quantum algorithms which variationally search for the ground state energy through the optimization of the energy of a parametrized state prepared in a quantum computer using an ansatz. Secondly, the quantum Krylov subspace diagonalization (QKSD) methods, which generate a subspace of the original Hilbert space and efficiently produce the lowest energy in said subspace as its output. Lastly, we have the quantum phase estimation (QPE) algorithms, which provably produce the ground state energy in Heisenberg scaling presenting hence a provable efficient solution. In this thesis, we firstly set to work on the problem of efficient Hamiltonian linear combination of unitaries (LCU) representation. This is mainly motivated by the wide-range impact an efficient compression of the Hamiltonian can potentially have on several quantum algorithms such as VQE, QPE...etc. We designed a method that efficiently compress the Hamiltonian representation in a way that is beneficially impactful across the set of the aforementioned quantum algorithms. Namely, we motivate and present in Sections 1.3 and 1.4 respectively, the regularized compressed double-factorization (RC-DF) and show how it reduces the energy measurement complexity both in terms of number of distinct observables and number of samples. Moreover, it also reduces the total depth of the quantum phase estimation circuit thanks to its low normalization factor. Secondly, given the importance of the energy derivatives, in Sections 2.1 and 2.2, we introduce and present an efficient quantum algorithm for the calculation of the analytic gradient of VQE energies of double-factorized Hamiltonians. Furthermore, in Section 2.1, we expand on the utility of RC-DF by presenting a quantum algorithm that determines the analytic gradient of energies measured with respect to RC-DF Hamiltonains. Third, in Section 3.1, we summarize the theoretical results of purification error-mitigation techniques, namely echo verification and virtual distillation. In Section 3.2, we report on the results of the experimental bench mark, of said techniques, performed on on Google’s Sycamore device to validate the theoretical scaling of error suppression and extrapolate the resources needed for classically intractable system sizes. Fourth, in Section 4 we establish the challenges of computing energy gradients in a quantum Krylov frame work. To overcome the problem, we provide, in Section 4.3, an efficient quantum algorithm for calculating energy derivative obtained through QKSD procedures. Our approach shows how the QKSD ground state can be prepared using quantum signal processing (QSP) and reduces the number of observables to O(1) per reduced density matrix (RDM). Lastly, in light of the importance of quantum RAMs due to their utility in a variety of quantum algorithms that require efficient initial state preparation, as explained in Section 5.5, we address the problematic exponential depth of the bucket-brigade QRAM (when decomposed). We present in Section 5.6 a very efficient Clifford+T decomposition of the bucket-brigade QRAM, which preserves the linear scaling of the depth of the circuit without introducing any additional ancilla.

•Aug 8, 2026•0 citations
We propose introducing an extended Hubbard Hamiltonian derived via the ab initio downfolding method, which was originally formulated for periodic materials, toward efficient quantum computing of molecular electronic structure calculations. By utilizing this method, the first-principles Hamiltonian of chemical systems can be coarse-grained by eliminating the electronic degrees of freedom in higher energy space and reducing the number of terms of electron repulsion integral from O(N4) to O(N2). Our approach is validated numerically on the vertical excitation energies and excitation characters of ethylene, butadiene, and hexatriene. The dynamical electron correlation is incorporated within the framework of the constrained random phase approximation in advance of quantum computations, and the constructed models capture the trend of experimental and high-level quantum chemical calculation results. As expected, the L1-norm of the fermion-to-qubit mapped model Hamiltonians is significantly lower than that of conventional ab initio Hamiltonians, suggesting improved scalability of quantum computing. Those numerical outcomes and the results of the simulation of excited-state sampling demonstrate that the ab initio extended Hubbard Hamiltonian may hold significant potential for quantum chemical calculations using quantum computers.
We propose a way of obtaining effective low energy Hubbard-like model Hamiltonians from ab initio quantum Monte Carlo calculations for molecular and extended systems. The Hamiltonian parameters are fit to best match the ab initio two-body density matrices and energies of the ground and excited states, and thus we refer to the method as ab initio density matrix based downfolding. For benzene (a finite system), we find good agreement with experimentally available energy gaps without using any experimental inputs. For graphene, a two dimensional solid (extended system) with periodic boundary conditions, we find the effective on-site Hubbard U(∗)/t to be 1.3 ± 0.2, comparable to a recent estimate based on the constrained random phase approximation. For molecules, such parameterizations enable calculation of excited states that are usually not accessible within ground state approaches. For solids, the effective Hamiltonian enables large-scale calculations using techniques designed for lattice models.
The accurate first-principles description of strongly correlated materials is an important and challenging problem in condensed matter physics. Ab initio downfolding has emerged as a way of deriving compressed many-body Hamiltonians that maintain the essential physics of strongly correlated materials. The solution of these material-specific models is still exponentially difficult to generate on classical computers, but quantum algorithms allow for a significant speed-up in obtaining the ground states of these compressed Hamiltonians. Here, we demonstrate that using quantum algorithms to obtain the properties of downfolded Hamiltonians can indeed yield high-fidelity solutions. By combining ab initio downfolding and variational quantum eigensolvers, we correctly predict the antiferromagnetic state of one-dimensional cuprate Ca2CuO3{\mathrm{Ca}}_{2}{\mathrm{Cu}\mathrm{O}}_{3}Ca2​CuO3​, the excitonic ground state of monolayer WTe2{\mathrm{W}\mathrm{Te}}_{2}WTe2​, and the charge-ordered state of correlated metal SrVO3{\mathrm{Sr}\mathrm{VO}}_{3}SrVO3​. Numerical simulations using a classical tensor network implementation of variational quantum eigensolvers allow us to simulate large models with up to 54 qubits and encompassing up to four bands in the correlated subspace, which is indicative of the complexity that our framework can address. Through these methods we demonstrate the potential of classical preoptimization and downfolding techniques for enabling efficient materials simulation using quantum algorithms.
Quantum chemistry models atoms and molecules using quantum mechanics, with the electronic structure problem at its core. This problem, which determines the energy and properties of electrons in a molecule, is exponentially hard to solve exactly on classical computers. To approximate solutions, effective models introduce layers of simplifications. However, these approximations can fail for strongly correlated systems, necessitating alternative approaches. Quantum computers, capable of processing quantum information natively, offer a promising path to simulate molecular systems beyond classical reach, with potential applications in catalysis, materials science, and photochemistry. Despite rapid advancements in quantum hardware, practical quantum computations remain challenging due to limited resources. This thesis optimizes quantum resource usage in computational chemistry, introducing novel embedding techniques and exploring applications beyond ground-state energies. Chapter 1 establishes the foundation by reviewing quantum chemistry methods, from Hartree-Fock and Density Functional Theory (DFT) to active space approaches. It also provides an introduction to quantum computing for chemistry, focusing on near-term algorithms. The following chapters present novel methods aimed at reducing quantum resource requirements and tackling problems classical methods struggle with. Chapter 2 introduces a technique to reduce the λ\lambdaλ-norm of the electronic structure Hamiltonian, a key measure of quantum resource demand. By transforming molecular orbitals, this method enhances sampling efficiency in Noisy Intermediate-Scale Quantum (NISQ) algorithms and reduces runtime in Fault-Tolerant Quantum Computing (FTQC). Localized orbitals outperform canonical ones, and an orbital-optimization scheme is proposed to minimize the λ\lambdaλ-norm. Benchmarks on hydrogen chains, FeMoco, and Ruthenium complexes demonstrate its effectiveness. Chapter 3 presents the FragPT2 framework for simulating large systems with multiple interacting fragments. This method embeds each fragment in the mean field of others and applies multi-reference perturbation theory to capture inter-fragment correlations such as dispersion and charge transfer efficiently. The approach reduces computational overhead and enables scalable simulations, as shown in applications to \ce{N2} dimers, aromatic dimers, and butadiene. Chapter 4 focuses on photochemical systems, where multiple electronic states must be treated equally. The state-averaged orbital-optimized variational quantum eigensolver (SAOOVQE) is extended with analytical energy gradients and non-adiabatic couplings, enabling geometry optimizations and simulations of non-adiabatic dynamics on quantum hardware. This is demonstrated by locating the conical intersection in formaldimine, highlighting SAOOVQE’s potential for studying photoisomerization in biomolecules. Building on this, Chapter 5 develops a quantum algorithm to detect conical intersections, where the Born-Oppenheimer approximation breaks down. These intersections are characterized by a discrete Berry phase (0 or π\piπ), representing their topological nature. The algorithm extracts this phase as a single bit of information, ensuring resilience to noise. Analytical proof and numerical validation using a toy molecular model illustrate its effectiveness for studying light-perception biochemistry and related photochemical processes. Finally, Chapter 6 explores machine learning density functionals trained on noisy quantum data. While DFT is computationally efficient, its accuracy depends on approximated exchange-correlation functionals. This work proposes a neural network-based approach to learn the exact functional from quantum data, showing that training on noisy outputs from NISQ devices can mitigate sampling errors. Applications to the Fermi-Hubbard model and other systems demonstrate its potential to generalize and provide accurate results under noise. This thesis advances quantum computational chemistry by optimizing quantum resource usage, developing new embedding strategies, and expanding the scope of quantum simulations beyond ground-state properties. These contributions pave the way for practical quantum algorithms that could revolutionize molecular simulations in the near future.
Simulation of electronic structure is one of the most promising applications on noisy intermediate-scale quantum (NISQ) era devices. However, NISQ devices suffer from a number of challenges like limited qubit connectivity, short coherence times, and sizable gate error rates. Thus, desired quantum algorithms should require shallow circuit depths and low qubit counts to take advantage of these devices. Here, we attempt to reduce quantum resource requirements for molecular simulations on a quantum computer while maintaining the desired accuracy with the help of classical quantum chemical theories of canonical transformation and explicit correlation. In this work, compact ab initio Hamiltonians are generated classically, in the second quantized form, through an approximate similarity transformation of the Hamiltonian with (a) an explicitly correlated two-body unitary operator with generalized pair excitations that remove the Coulombic electron-electron singularities from the Hamiltonian and (b) a unitary one-body operator to efficiently capture the orbital relaxation effects required for accurate description of the excited states. The resulting transcorrelated Hamiltonians are able to describe both the ground and the excited states of molecular systems in a balanced manner. Using the variational quantum eigensolver (VQE) method based on the unitary coupled cluster with singles and doubles (UCCSD) ansatz and only a minimal basis set (ANO-RCC-MB), we demonstrate that the transcorrelated Hamiltonians can produce ground state energies comparable to the reference CCSD energies with the much larger cc-pVTZ basis set. This leads to a reduction in the number of required CNOT gates by more than 3 orders of magnitude for the chemical species studied in this work. Furthermore, using the quantum equation of motion (qEOM) formalism in conjunction with the transcorrelated Hamiltonian, we are able to reduce the deviations in the excitation energies from the reference EOM-CCSD/cc-pVTZ values by an order of magnitude. The transcorrelated Hamiltonians developed here are Hermitian and contain only one- and two-body interaction terms and thus can be easily combined with any quantum algorithm for accurate electronic structure simulations.
Abstract Quantum computing has shown great potential in various quantum chemical applications such as drug discovery, material design, and catalyst optimization. Although significant progress has been made in the quantum simulation of simple molecules, ab initio simulation of solid-state materials on quantum computers is still in its early stage, mostly owing to the fact that the system size quickly becomes prohibitively large when approaching the thermodynamic limit. In this work, we introduce an orbital-based multifragment approach on top of the periodic density matrix embedding theory, resulting in a significantly smaller problem size for the current near-term quantum computer. We demonstrate the accuracy and efficiency of our method compared with the conventional methodologies and experiments on solid-state systems with complex electronic structures. These include spin-polarized states of a hydrogen chain (1D-H), the equation of state of a boron nitride layer (h-BN) as well as the magnetic ordering in nickel oxide (NiO), a prototypical strongly correlated solid. Our results suggest that quantum embedding combined with a chemically intuitive fragmentation can greatly advance quantum simulation of realistic materials, thereby paving the way for solving important yet classically hard industrial problems on near-term quantum devices.
In ab-initio quantum chemistry, solving the electronic structure problem of a molecular system of interest to obtain an approximation of the ground and, in some cases, the excited state energies is a core and central task in various quantum chemistry processes. These include, but certainly not limited to, the calculation of the activation energy–that is the minimal energy required to launch a given chemical reaction–, the dipole and multipole moments which describe the polarity of the molecule, performing the optimization of the geometry of the molecule and searching for transition states. Furthermore, many quantum chemistry applications are predicated, not merely on the approximation of the ground state energy, but also on the corresponding first order derivatives. The body of literature of classical algorithms approximating the ground state energy and its first order derivative is extensively rich with a plethora of methods such as self-consistent mean-field methods, coupled-cluster methods, density matrix renormalization group and many more, each of which has intrinsic set of properties and characteristics that makes it suitable for specific tasks and cases. However, classical methods face a practically insurmountable challenge: the efficient computation of high accuracy approximation of ground state energies of large system sizes. This is fundamentally because the electronic structure problem provably belongs to the complexity class of QMA-hard problems. Which also means that it is out of reach for quantum algorithms as well in general. However, with certain assumptions that are expected to hold molecules of interest–that so far proved to be classically challenging because the required accuracy set by the standard of chemical accuracy threshold (generally held in quantum chemistry)– quantum algorithms can efficiently treat such cases. While originally theorized by Richard Feynmann as a potentially efficient way of simulating some classically intractable many-body systems, quantum computing has since proven to have a stronger and richer potential paving the way for the inception of new algorithms such as Shor’s algorithm for integer factorization, HHL for solving linear system of equation and Grover’s algorithm for constrained binary search, just to name a few. These algorithms provably exhibit an improvement rate that goes respectively exponentially and quadratically in the time complexity. Quantum chemistry is considered a prominent candidate to benefit from quantum computing given the variety of quantum algorithms put forth to solve the electronic structure problem of particular systems of interest. These quantum algorithm proposals can be broadly categorized in three main categories that span the spectrum: from noisy intermediate scale quantum (NISQ) computers to early and full scale fault tolerant quantum ((E)FTQC) computers. Firstly, the variational quantum eigensolver (VQE) family of quantum algorithms which variationally search for the ground state energy through the optimization of the energy of a parametrized state prepared in a quantum computer using an ansatz. Secondly, the quantum Krylov subspace diagonalization (QKSD) methods, which generate a subspace of the original Hilbert space and efficiently produce the lowest energy in said subspace as its output. Lastly, we have the quantum phase estimation (QPE) algorithms, which provably produce the ground state energy in Heisenberg scaling presenting hence a provable efficient solution. In this thesis, we firstly set to work on the problem of efficient Hamiltonian linear combination of unitaries (LCU) representation. This is mainly motivated by the wide-range impact an efficient compression of the Hamiltonian can potentially have on several quantum algorithms such as VQE, QPE...etc. We designed a method that efficiently compress the Hamiltonian representation in a way that is beneficially impactful across the set of the aforementioned quantum algorithms. Namely, we motivate and present in Sections 1.3 and 1.4 respectively, the regularized compressed double-factorization (RC-DF) and show how it reduces the energy measurement complexity both in terms of number of distinct observables and number of samples. Moreover, it also reduces the total depth of the quantum phase estimation circuit thanks to its low normalization factor. Secondly, given the importance of the energy derivatives, in Sections 2.1 and 2.2, we introduce and present an efficient quantum algorithm for the calculation of the analytic gradient of VQE energies of double-factorized Hamiltonians. Furthermore, in Section 2.1, we expand on the utility of RC-DF by presenting a quantum algorithm that determines the analytic gradient of energies measured with respect to RC-DF Hamiltonains. Third, in Section 3.1, we summarize the theoretical results of purification error-mitigation techniques, namely echo verification and virtual distillation. In Section 3.2, we report on the results of the experimental bench mark, of said techniques, performed on on Google’s Sycamore device to validate the theoretical scaling of error suppression and extrapolate the resources needed for classically intractable system sizes. Fourth, in Section 4 we establish the challenges of computing energy gradients in a quantum Krylov frame work. To overcome the problem, we provide, in Section 4.3, an efficient quantum algorithm for calculating energy derivative obtained through QKSD procedures. Our approach shows how the QKSD ground state can be prepared using quantum signal processing (QSP) and reduces the number of observables to O(1) per reduced density matrix (RDM). Lastly, in light of the importance of quantum RAMs due to their utility in a variety of quantum algorithms that require efficient initial state preparation, as explained in Section 5.5, we address the problematic exponential depth of the bucket-brigade QRAM (when decomposed). We present in Section 5.6 a very efficient Clifford+T decomposition of the bucket-brigade QRAM, which preserves the linear scaling of the depth of the circuit without introducing any additional ancilla.