Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1504.03704 · The Journal of Chemical Physics

Density-matrix based determination of low-energy model Hamiltonians from ab initio wavefunctions

Hitesh J. Changlani, Huihuo Zheng, Lucas K. Wagner

Published Aug 4, 2015• 35 citations
arXivHTMLPDF

Abstract

We propose a way of obtaining effective low energy Hubbard-like model Hamiltonians from ab initio quantum Monte Carlo calculations for molecular and extended systems. The Hamiltonian parameters are fit to best match the ab initio two-body density matrices and energies of the ground and excited states, and thus we refer to the method as ab initio density matrix based downfolding. For benzene (a finite system), we find good agreement with experimentally available energy gaps without using any experimental inputs. For graphene, a two dimensional solid (extended system) with periodic boundary conditions, we find the effective on-site Hubbard U(∗)/t to be 1.3 ± 0.2, comparable to a recent estimate based on the constrained random phase approximation. For molecules, such parameterizations enable calculation of excited states that are usually not accessible within ground state approaches. For solids, the effective Hamiltonian enables large-scale calculations using techniques designed for lattice models.

DOI
10.1063/1.4927664

Related papers

Ab initio extended Hubbard model of short polyenes for efficient quantum computing

Yuichiro Yoshida, Nayuta Takemori, Wataru Mizukami

We propose introducing an extended Hubbard Hamiltonian derived via the ab initio downfolding method, which was originally formulated for periodic materials, toward efficient quantum computing of molecular electronic structure calculations. By utilizing this method, the first-principles Hamiltonian of chemical systems can be coarse-grained by eliminating the electronic degrees of freedom in higher energy space and reducing the number of terms of electron repulsion integral from O(N4) to O(N2). Our approach is validated numerically on the vertical excitation energies and excitation characters of ethylene, butadiene, and hexatriene. The dynamical electron correlation is incorporated within the framework of the constrained random phase approximation in advance of quantum computations, and the constructed models capture the trend of experimental and high-level quantum chemical calculation results. As expected, the L1-norm of the fermion-to-qubit mapped model Hamiltonians is significantly lower than that of conventional ab initio Hamiltonians, suggesting improved scalability of quantum computing. Those numerical outcomes and the results of the simulation of excited-state sampling demonstrate that the ab initio extended Hubbard Hamiltonian may hold significant potential for quantum chemical calculations using quantum computers.

arXiv:2404.01623•The Journal of Chemical Physics•Aug 28, 2024•7 citations

Noneigenstate Ab Initio Density Matrix Downfolding for Constructing Model Hamiltonians in Quantum Chemistry

David Wilian Oliveira de Sousa, Elvira R. Sayfutyarova

Model Hamiltonians represent a convenient way of reducing complex problems of many-electron quantum mechanics to much simpler problems: they can fully reproduce the core behaviors of a system of interest by encoding only the dominant physical interactions and using only a small number of associated parameters. Model Hamiltonians have been successfully applied to describe many chemical and physical phenomena. Density matrix downfolding (DMD) [ J. Chem. Phys. 2015, 143 (10), 102814 ] allows the derivation of model Hamiltonians of any form in a systematically improvable fashion by matching the energy spectrum of ab initio Hamiltonians with those of the model Hamiltonians. This method allows not only the improvement of existing models but also the construction of accurate and efficient physical models for various systems. While DMD looks like a promising approach, it has rarely been applied within chemistry, and neither its limits nor its practical performance is well-understood. In this work, we evaluated the performance of DMD, based on noneigenstates of ab initio Hamiltonians, for several realistic chemical systems: benzene, naphthalene, FeSe, and a prototypical Fe(IV)═O complex found in the active sites of 2-oxoglutarate-dependent oxygenases. Our results show that DMD is a reliable and computationally efficient tool for obtaining optimized model Hamiltonians in quantum chemistry. This not only opens the door to studying complex systems at reduced computational cost but also to isolating and understanding the physical core principles that dominate their behavior─this might offer new insights for tuning or even designing chemical systems for applications ranging from biochemistry to catalysis.

Journal of Chemical Theory and Computation•Aug 28, 2025•1 citation

Determination of the Hubbard model parameters by using the unrestricted Hartree–Fock solutions, and improvement of their energies

Daisuke Yamaki, Koji Yasuda, Kizashi Yamaguchi

Abstract A strategy is proposed to determine parameters in model Hamiltonians from the difference of the density matrices calculated by ab initio methods. As an example, the parameters of the two‐site Hubbard model are determined. The parameters t and U are explicitly expressed in terms of the energy difference and the difference of the expectation values of the spin operator 〈S2〉 between two unrestricted Hartree–Fock (UHF) solutions. By using this relation and the exact energy formulas of the model Hamiltonian the energies of the ground and excited states of the ab initio Hamiltonian are estimated. This energy estimation scheme is applied to H2 and Li2 molecules and the results are in reasonable agreement with those of the full configuration‐interaction method. The errors of our estimation are also discussed and evaluated by using a modified Hubbard model. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005

International Journal of Quantum Chemistry•Jan 1, 2005•0 citations

Requirements for building effective Hamiltonians using quantum-enhanced density matrix downfolding

Shivesh Pathak, Antonio Russo, Stefan Seritan +4 more

Density matrix downfolding (DMD) is a technique for regressing low-energy effective Hamiltonians from quantum many-body Hamiltonians. One limiting factor in the accuracy of classical implementations of DMD is the presence of difficult-to-quantify systematic errors attendant to sampling the observables of quantum many-body systems on an approximate low-energy subspace. We propose a hybrid quantum-classical protocol for circumventing this limitation, relying on the prospective ability of quantum computers to efficiently prepare and sample from states in well-defined low-energy subspaces with systematically improvable accuracy. We introduce three requirements for when this is possible, including a notion of compressibility that quantifies features of Hamiltonians and low-energy subspaces thereof for which quantum DMD might be efficient. Assuming that these requirements are met, we analyze design choices for our protocol and provide resource estimates for implementing quantum-enhanced DMD on both the doped 2-D Fermi-Hubbard model and an ab initio model of a cuprate superconductor.

arXiv:2403.01043•Mar 2, 2024•4 citations

An ab-initio many-body method for electronic structure calculations of solids. I. Description of the method

I. Schnell, G. Czycholl, Robert C. Albers

We propose a new, alternative method for ab-initio calculations of the electronic structure of solids, which has been specifically adapted to treat many-body effects in a more rigorous way than many existing ab-initio methods. We start from a standard band-structure calculation for an effective one-particle Hamiltonian approximately describing the material of interest. This yields a suitable set of one-particle basis functions, from which well localized Wannier functions can be constructed using a method proposed by Marzari and Vanderbilt. Within this (minimal) basis of localized Wannier functions the matrix elements of the non-interacting (one-particle) Hamiltonian as well as the Coulomb matrix elements can be calculated. The result is a many-body Hamiltonian in second quantization with parameters determined from first principles calculations for the material of interest. The Hamiltonian is in the form of a multi-band Hamiltonian in second quantization (a kind of extended, multi-band Hubbard model) such that all the standard many-body methods can be applied. We explicitly show how this approach can be solved in the simplest many-body approximation, the mean-field Hartree-Fock approximation (HFA), which takes into account exact exchange and corrects for self-interaction effects.

arXiv:cond-mat/0304643•Apr 28, 2003•0 citations

Downfolding from ab initio to interacting model Hamiltonians: comprehensive analysis and benchmarking of the DFT+cRPA approach

Yueqing Chang, Erik G. C. P. van Loon, Brandon Eskridge +8 more

Abstract Model Hamiltonians are regularly derived from first principles to describe correlated matter. However, the standard methods for this contain a number of largely unexplored approximations. For a strongly correlated impurity model system, here we carefully compare a standard downfolding technique with the best possible ground-truth estimates for charge-neutral excited-state energies and wave functions using state-of-the-art first-principles many-body wave function approaches. To this end, we use the vanadocene molecule and analyze all downfolding aspects, including the Hamiltonian form, target basis, double-counting correction, and Coulomb interaction screening models. We find that the choice of target-space basis functions emerges as a key factor for the quality of the downfolded results, while orbital-dependent double-counting corrections diminish the quality. Background screening of the Coulomb interaction matrix elements primarily affects crystal-field excitations. Our benchmark uncovers the relative importance of each downfolding step and offers insights into the potential accuracy of minimal downfolded model Hamiltonians.

arXiv:2311.05987•npj Computational Materials•Jun 21, 2024•33 citations
We propose a way of obtaining effective low energy Hubbard-like model Hamiltonians from ab initio quantum Monte Carlo calculations for molecular and extended systems. The Hamiltonian parameters are fit to best match the ab initio two-body density matrices and energies of the ground and excited states, and thus we refer to the method as ab initio density matrix based downfolding. For benzene (a finite system), we find good agreement with experimentally available energy gaps without using any experimental inputs. For graphene, a two dimensional solid (extended system) with periodic boundary conditions, we find the effective on-site Hubbard U(∗)/t to be 1.3 ± 0.2, comparable to a recent estimate based on the constrained random phase approximation. For molecules, such parameterizations enable calculation of excited states that are usually not accessible within ground state approaches. For solids, the effective Hamiltonian enables large-scale calculations using techniques designed for lattice models.
We propose introducing an extended Hubbard Hamiltonian derived via the ab initio downfolding method, which was originally formulated for periodic materials, toward efficient quantum computing of molecular electronic structure calculations. By utilizing this method, the first-principles Hamiltonian of chemical systems can be coarse-grained by eliminating the electronic degrees of freedom in higher energy space and reducing the number of terms of electron repulsion integral from O(N4) to O(N2). Our approach is validated numerically on the vertical excitation energies and excitation characters of ethylene, butadiene, and hexatriene. The dynamical electron correlation is incorporated within the framework of the constrained random phase approximation in advance of quantum computations, and the constructed models capture the trend of experimental and high-level quantum chemical calculation results. As expected, the L1-norm of the fermion-to-qubit mapped model Hamiltonians is significantly lower than that of conventional ab initio Hamiltonians, suggesting improved scalability of quantum computing. Those numerical outcomes and the results of the simulation of excited-state sampling demonstrate that the ab initio extended Hubbard Hamiltonian may hold significant potential for quantum chemical calculations using quantum computers.
Model Hamiltonians represent a convenient way of reducing complex problems of many-electron quantum mechanics to much simpler problems: they can fully reproduce the core behaviors of a system of interest by encoding only the dominant physical interactions and using only a small number of associated parameters. Model Hamiltonians have been successfully applied to describe many chemical and physical phenomena. Density matrix downfolding (DMD) [ J. Chem. Phys. 2015, 143 (10), 102814 ] allows the derivation of model Hamiltonians of any form in a systematically improvable fashion by matching the energy spectrum of ab initio Hamiltonians with those of the model Hamiltonians. This method allows not only the improvement of existing models but also the construction of accurate and efficient physical models for various systems. While DMD looks like a promising approach, it has rarely been applied within chemistry, and neither its limits nor its practical performance is well-understood. In this work, we evaluated the performance of DMD, based on noneigenstates of ab initio Hamiltonians, for several realistic chemical systems: benzene, naphthalene, FeSe, and a prototypical Fe(IV)═O complex found in the active sites of 2-oxoglutarate-dependent oxygenases. Our results show that DMD is a reliable and computationally efficient tool for obtaining optimized model Hamiltonians in quantum chemistry. This not only opens the door to studying complex systems at reduced computational cost but also to isolating and understanding the physical core principles that dominate their behavior─this might offer new insights for tuning or even designing chemical systems for applications ranging from biochemistry to catalysis.
Abstract A strategy is proposed to determine parameters in model Hamiltonians from the difference of the density matrices calculated by ab initio methods. As an example, the parameters of the two‐site Hubbard model are determined. The parameters t and U are explicitly expressed in terms of the energy difference and the difference of the expectation values of the spin operator 〈S2〉 between two unrestricted Hartree–Fock (UHF) solutions. By using this relation and the exact energy formulas of the model Hamiltonian the energies of the ground and excited states of the ab initio Hamiltonian are estimated. This energy estimation scheme is applied to H2 and Li2 molecules and the results are in reasonable agreement with those of the full configuration‐interaction method. The errors of our estimation are also discussed and evaluated by using a modified Hubbard model. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005
Density matrix downfolding (DMD) is a technique for regressing low-energy effective Hamiltonians from quantum many-body Hamiltonians. One limiting factor in the accuracy of classical implementations of DMD is the presence of difficult-to-quantify systematic errors attendant to sampling the observables of quantum many-body systems on an approximate low-energy subspace. We propose a hybrid quantum-classical protocol for circumventing this limitation, relying on the prospective ability of quantum computers to efficiently prepare and sample from states in well-defined low-energy subspaces with systematically improvable accuracy. We introduce three requirements for when this is possible, including a notion of compressibility that quantifies features of Hamiltonians and low-energy subspaces thereof for which quantum DMD might be efficient. Assuming that these requirements are met, we analyze design choices for our protocol and provide resource estimates for implementing quantum-enhanced DMD on both the doped 2-D Fermi-Hubbard model and an ab initio model of a cuprate superconductor.
We propose a new, alternative method for ab-initio calculations of the electronic structure of solids, which has been specifically adapted to treat many-body effects in a more rigorous way than many existing ab-initio methods. We start from a standard band-structure calculation for an effective one-particle Hamiltonian approximately describing the material of interest. This yields a suitable set of one-particle basis functions, from which well localized Wannier functions can be constructed using a method proposed by Marzari and Vanderbilt. Within this (minimal) basis of localized Wannier functions the matrix elements of the non-interacting (one-particle) Hamiltonian as well as the Coulomb matrix elements can be calculated. The result is a many-body Hamiltonian in second quantization with parameters determined from first principles calculations for the material of interest. The Hamiltonian is in the form of a multi-band Hamiltonian in second quantization (a kind of extended, multi-band Hubbard model) such that all the standard many-body methods can be applied. We explicitly show how this approach can be solved in the simplest many-body approximation, the mean-field Hartree-Fock approximation (HFA), which takes into account exact exchange and corrects for self-interaction effects.
Abstract Model Hamiltonians are regularly derived from first principles to describe correlated matter. However, the standard methods for this contain a number of largely unexplored approximations. For a strongly correlated impurity model system, here we carefully compare a standard downfolding technique with the best possible ground-truth estimates for charge-neutral excited-state energies and wave functions using state-of-the-art first-principles many-body wave function approaches. To this end, we use the vanadocene molecule and analyze all downfolding aspects, including the Hamiltonian form, target basis, double-counting correction, and Coulomb interaction screening models. We find that the choice of target-space basis functions emerges as a key factor for the quality of the downfolded results, while orbital-dependent double-counting corrections diminish the quality. Background screening of the Coulomb interaction matrix elements primarily affects crystal-field excitations. Our benchmark uncovers the relative importance of each downfolding step and offers insights into the potential accuracy of minimal downfolded model Hamiltonians.