Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2402.06632 · Review of Scientific Instruments

Microgram BaCl2 ablation targets for trapped ion experiments

Noah Greenberg, Akbar Jahangiri Jozani, Collin J. C. Epstein, Xinghe Tan, Rajibul Islam, Crystal Senko

Published Apr 1, 2024• 2 citations
arXivHTMLPDF

Abstract

Trapped ions for quantum information processing have been an area of intense study due to the extraordinarily high fidelity operations that have been reported experimentally. Specifically, barium trapped ions have been shown to have exceptional state-preparation and measurement fidelities. The 133Ba+ (I = 1/2) isotope in particular is a promising candidate for large-scale quantum computing experiments. However, a major pitfall with this isotope is that it is radioactive and is thus generally used in microgram quantities to satisfy safety regulations. We describe a new method for creating microgram barium chloride (BaCl2) ablation targets for use in trapped ion experiments and compare our procedure to previous methods. We outline two recipes for the fabrication of ablation targets that increase the production of neutral atoms for isotope-selective loading of barium ions. We show that heat-treatment of the ablation targets greatly increases the consistency at which neutral atoms can be produced, and we characterize the uniformity of these targets using trap-independent techniques such as energy dispersive x-ray spectroscopy and neutral fluorescence collection. Our comparison between fabrication techniques and the demonstration of consistent neutral fluorescence paves a path toward reliable loading of 133Ba+ in surface traps and opens opportunities for scalable quantum computing with this isotope.

DOI
10.1063/5.0198336

Related papers

Isotope-selective laser ablation ion-trap loading of Ba+137 using a BaCl2 target

Brendan White, Pei Jiang Low, Yvette de Sereville +4 more

The $^{133}\mathrm{Ba}^{+}$ ion is a promising candidate as a high-fidelity qubit, and the $^{137}\mathrm{Ba}^{+}$ isotope is promising as a high-fidelity qudit $(d>2)$. Barium metal is very reactive, and $^{133}\mathrm{Ba}^{+}$ is radioactive and can only be sourced in small quantities, so the most commonly used loading method, oven heating, is less suited for barium and is currently not possible for $^{133}\mathrm{Ba}^{+}$. Pulsed laser ablation solves both of these problems by utilizing compound barium sources while also giving some distinct advantages, such as fast loading, less displaced material, and lower heat load near the ion trap. Because of the relatively low abundances of the isotopes of interest, a two-step photoionization technique is used, which gives us the ability to selectively load isotopes. Characterization of the ablation process for our ${\mathrm{BaCl}}_{2}$ targets are presented, including observation of neutral and ion ablation-fluence regimes, preparation and conditioning, lifetimes of ablation spots, and plume velocity distributions. We show that by using laser ablation on ${\mathrm{BaCl}}_{2}$ salt targets with a two-step photoionization method, we can produce and trap barium ions reliably. Furthermore, we demonstrate that with our photoionization method, we can trap $^{137}\mathrm{Ba}^{+}$ with an enhanced selectivity compared to its natural abundance.

arXiv:2110.08456•Physical Review A•Mar 9, 2022•17 citations

Ablation loading of barium ions into a surface-electrode trap

Xiaoyang Shi, Susanna Todaro, Gabriel Mintzer +3 more

Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.

arXiv:2303.02143•Applied Physics Letters•Jun 26, 2023•9 citations

Towards Selective Two-step Photoionization of Ba Isotopes for Ba+ Ion Trap

Tamura Koji, Ogura Koichi, Shimada Hiroyuki +5 more

Cooling and trapping ion system is considered as a promising candidate for quantum information processor. Especially, by manipulating 133Ba+ ion, improved fidelity of qubit operation is expected, where selective 133Ba isotope introduction to the ion trap is required. Development of isotope selective loading system of Ba ion for the ion trap using the two-step laser photoionization is shown. For the excitation step (791 nm), the target isotope atom is photo-excited among other Ba isotopes based on their isotope shift. A tunable laser with a narrow spectral linewidth compared to the Ba isotope shift, was developed using an external cavity diode laser (ECDL). Mode-hop-free (MHF) scanning was achieved. For the second ionization step, a pulsed N2 laser was used. Both laser beams were combined using a mirror, focused with a lens, and introduced into a vacuum chamber. An atomic source was made by resistive heating, which can heat the source and generate atomic beam with sufficient vapor pressure and atomic density for the measurements. The system is under development and is prepared for the Ba atomic beam generation and laser photoionization experiments.

•Jul 4, 2024•0 citations

High-fidelity operation of a radioactive trapped-ion qubit, $^{133}$Ba$^+$

Justin Christensen

$^{133}$Ba$^+$ has been identified as an attractive ion for quantum information processing due to the unique combination of its spin-1/2 nucleus, visible wavelength electronic transitions, and long D-state lifetimes ($\\tau\\sim $1~min). Using a microgram source of radioactive material, we trap and laser-cool the synthetic \\textit{A} = 133 radioisotope of barium II ($\\tau_{1/2} \\approx 10.5$~yr) in a radio-frequency ion trap. To demonstrate high fidelity qubit operations, a number of unknown state energies were needed. We measure the isotope shift and hyperfine structure of the 6$^2$P$_{1/2}\\leftrightarrow 5^2$D$_{3/2}$ electronic transition needed for laser cooling, state preparation, and state detection of the clock-state hyperfine and optical qubits. For high-fidelity operations with electron shelving, we report measurements of the 6$^2$P$_{3/2}$ and $5^2$D$_{5/2}$ hyperfine splittings, as well as the~6$^2$P$_{3/2}~\\leftrightarrow~6^2$S$_{1/2}$ and ~6$^2$P$_{3/2}~\\leftrightarrow~5^2$D$_{5/2}$ transition frequencies. Using these transitions, we demonstrate high-fidelity \\ba \\ hyperfine qubit manipulation with electron shelving detection to benchmark qubit state preparation and measurement (SPAM). Using single-shot, threshold discrimination, we measure an average SPAM fidelity of $\\mathcal{F} = 0.99971(3)$, a factor of $\\approx$ 2 improvement over the best reported performance of any qubit.Finally, we report the 6$^2$P$_{1/2}\\leftrightarrow 5^2$D$_{3/2}$ electronic transition isotope shift for the rare \\textit{A} = 130 and 132 barium nuclides, completing the spectroscopic characterization necessary for laser cooling all long-lived barium II isotopes.

•Jan 1, 2020•5 citations

Efficient isotope-selective pulsed laser ablation loading of 174Yb+ ions in a surface electrode trap

Geert Vrijsen, Yuhi Aikyo, Robert Spivey +2 more

ions in a surface electrode ion trap by using single pulses from a Q-switched Nd:YAG laser to ablate neutral atoms, combined with a two-photon photo-ionization process. The method is three orders of magnitude faster to load a single ion as compared to traditional resistively heated sources and can load large collections of ions in seconds. The negligible thermal load of this method enables the use of this ablation-based loading scheme in ion traps operating under cryogenic conditions.

Optics Express•Nov 5, 2019•24 citations

Trapping triply ionized thorium isotopes

Layne Churchill

Cold trapped ions have many applications in quantum information science and precision metrology. In this thesis, we present progress toward two objectives involving ions confined to linear RF traps: the strong coupling of Ba+ ions with a high finesse optical cavity, and the observation of an optical nuclear transition in 229Th3+. In pursuit of the first objective, a novel high-temperture vapor cell for the spectroscopy of neutral barium was constructed. Using this vapor cell, a new technique for isotope-selective photoionization loading of Ba+ in an ion trap was developed. In pursuit of the second objective, techniques ultimately to be used in creating, trapping, and observing 229Th3+ are studied using 232Th3+. Ion traps are loaded with 232Th3+ via laser ablation of thorium targets. 232Th3+ is detected optically using laser-induced fluorescence and electronically using a channel electron multiplier. A technique for creating ablation targets from trace quantities of thorium nitrate is presented. The primary loss mechanisms of Th3+, charge exchange and chemical reactions, are studied.

•Aug 3, 2010•5 citations
Trapped ions for quantum information processing have been an area of intense study due to the extraordinarily high fidelity operations that have been reported experimentally. Specifically, barium trapped ions have been shown to have exceptional state-preparation and measurement fidelities. The 133Ba+ (I = 1/2) isotope in particular is a promising candidate for large-scale quantum computing experiments. However, a major pitfall with this isotope is that it is radioactive and is thus generally used in microgram quantities to satisfy safety regulations. We describe a new method for creating microgram barium chloride (BaCl2) ablation targets for use in trapped ion experiments and compare our procedure to previous methods. We outline two recipes for the fabrication of ablation targets that increase the production of neutral atoms for isotope-selective loading of barium ions. We show that heat-treatment of the ablation targets greatly increases the consistency at which neutral atoms can be produced, and we characterize the uniformity of these targets using trap-independent techniques such as energy dispersive x-ray spectroscopy and neutral fluorescence collection. Our comparison between fabrication techniques and the demonstration of consistent neutral fluorescence paves a path toward reliable loading of 133Ba+ in surface traps and opens opportunities for scalable quantum computing with this isotope.
The 133Ba+^{133}\mathrm{Ba}^{+}133Ba+ ion is a promising candidate as a high-fidelity qubit, and the 137Ba+^{137}\mathrm{Ba}^{+}137Ba+ isotope is promising as a high-fidelity qudit (d>2)(d>2)(d>2). Barium metal is very reactive, and 133Ba+^{133}\mathrm{Ba}^{+}133Ba+ is radioactive and can only be sourced in small quantities, so the most commonly used loading method, oven heating, is less suited for barium and is currently not possible for 133Ba+^{133}\mathrm{Ba}^{+}133Ba+. Pulsed laser ablation solves both of these problems by utilizing compound barium sources while also giving some distinct advantages, such as fast loading, less displaced material, and lower heat load near the ion trap. Because of the relatively low abundances of the isotopes of interest, a two-step photoionization technique is used, which gives us the ability to selectively load isotopes. Characterization of the ablation process for our BaCl2{\mathrm{BaCl}}_{2}BaCl2​ targets are presented, including observation of neutral and ion ablation-fluence regimes, preparation and conditioning, lifetimes of ablation spots, and plume velocity distributions. We show that by using laser ablation on BaCl2{\mathrm{BaCl}}_{2}BaCl2​ salt targets with a two-step photoionization method, we can produce and trap barium ions reliably. Furthermore, we demonstrate that with our photoionization method, we can trap 137Ba+^{137}\mathrm{Ba}^{+}137Ba+ with an enhanced selectivity compared to its natural abundance.
Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.
Cooling and trapping ion system is considered as a promising candidate for quantum information processor. Especially, by manipulating 133Ba+ ion, improved fidelity of qubit operation is expected, where selective 133Ba isotope introduction to the ion trap is required. Development of isotope selective loading system of Ba ion for the ion trap using the two-step laser photoionization is shown. For the excitation step (791 nm), the target isotope atom is photo-excited among other Ba isotopes based on their isotope shift. A tunable laser with a narrow spectral linewidth compared to the Ba isotope shift, was developed using an external cavity diode laser (ECDL). Mode-hop-free (MHF) scanning was achieved. For the second ionization step, a pulsed N2 laser was used. Both laser beams were combined using a mirror, focused with a lens, and introduced into a vacuum chamber. An atomic source was made by resistive heating, which can heat the source and generate atomic beam with sufficient vapor pressure and atomic density for the measurements. The system is under development and is prepared for the Ba atomic beam generation and laser photoionization experiments.
High-fidelity operation of a radioactive trapped-ion qubit, 133^{133}133Ba+^++
133^{133}133Ba+^++ has been identified as an attractive ion for quantum information processing due to the unique combination of its spin-1/2 nucleus, visible wavelength electronic transitions, and long D-state lifetimes ($\\tau\\sim 1 min).Usingamicrogramsourceofradioactivematerial,wetrapandlaser−coolthesynthetictextitA=133radioisotopeofbariumII(1~min). Using a microgram source of radioactive material, we trap and laser-cool the synthetic \\textit{A} = 133 radioisotope of barium II (1 min).Usingamicrogramsourceofradioactivematerial,wetrapandlaser−coolthesynthetictextitA=133radioisotopeofbariumII(\\tau_{1/2} \\approx 10.5 yr)inaradio−frequencyiontrap.Todemonstratehighfidelityqubitoperations,anumberofunknownstateenergieswereneeded.Wemeasuretheisotopeshiftandhyperfinestructureofthe6~yr) in a radio-frequency ion trap. To demonstrate high fidelity qubit operations, a number of unknown state energies were needed. We measure the isotope shift and hyperfine structure of the 6 yr)inaradio−frequencyiontrap.Todemonstratehighfidelityqubitoperations,anumberofunknownstateenergieswereneeded.Wemeasuretheisotopeshiftandhyperfinestructureofthe6^2PPP_{1/2}\\leftrightarrow 5^2DDD_{3/2}$ electronic transition needed for laser cooling, state preparation, and state detection of the clock-state hyperfine and optical qubits. For high-fidelity operations with electron shelving, we report measurements of the 62^22P3/2_{3/2}3/2​ and 525^252D5/2_{5/2}5/2​ hyperfine splittings, as well as the~62^22P3/2 leftrightarrow 62_{3/2}~\\leftrightarrow~6^23/2​ leftrightarrow 62S1/2_{1/2}1/2​ and ~62^22P3/2 leftrightarrow 52_{3/2}~\\leftrightarrow~5^23/2​ leftrightarrow 52D5/2_{5/2}5/2​ transition frequencies. Using these transitions, we demonstrate high-fidelity \\ba \\ hyperfine qubit manipulation with electron shelving detection to benchmark qubit state preparation and measurement (SPAM). Using single-shot, threshold discrimination, we measure an average SPAM fidelity of mathcalF=0.99971(3)\\mathcal{F} = 0.99971(3)mathcalF=0.99971(3), a factor of approx\\approxapprox 2 improvement over the best reported performance of any qubit.Finally, we report the 62^22P1/2leftrightarrow52_{1/2}\\leftrightarrow 5^21/2​leftrightarrow52D3/2_{3/2}3/2​ electronic transition isotope shift for the rare \\textit{A} = 130 and 132 barium nuclides, completing the spectroscopic characterization necessary for laser cooling all long-lived barium II isotopes.
Cold trapped ions have many applications in quantum information science and precision metrology. In this thesis, we present progress toward two objectives involving ions confined to linear RF traps: the strong coupling of Ba+ ions with a high finesse optical cavity, and the observation of an optical nuclear transition in 229Th3+. In pursuit of the first objective, a novel high-temperture vapor cell for the spectroscopy of neutral barium was constructed. Using this vapor cell, a new technique for isotope-selective photoionization loading of Ba+ in an ion trap was developed. In pursuit of the second objective, techniques ultimately to be used in creating, trapping, and observing 229Th3+ are studied using 232Th3+. Ion traps are loaded with 232Th3+ via laser ablation of thorium targets. 232Th3+ is detected optically using laser-induced fluorescence and electronically using a channel electron multiplier. A technique for creating ablation targets from trace quantities of thorium nitrate is presented. The primary loss mechanisms of Th3+, charge exchange and chemical reactions, are studied.