Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2110.08456 · Physical Review A

Isotope-selective laser ablation ion-trap loading of Ba+137 using a BaCl2 target

Brendan White, Pei Jiang Low, Yvette de Sereville, Matthew Day, Noah Greenberg, Richard Rademacher, Crystal Senko

Published Mar 9, 2022• 17 citations
arXivHTMLPDF

Abstract

The $^{133}\mathrm{Ba}^{+}$ ion is a promising candidate as a high-fidelity qubit, and the $^{137}\mathrm{Ba}^{+}$ isotope is promising as a high-fidelity qudit $(d>2)$. Barium metal is very reactive, and $^{133}\mathrm{Ba}^{+}$ is radioactive and can only be sourced in small quantities, so the most commonly used loading method, oven heating, is less suited for barium and is currently not possible for $^{133}\mathrm{Ba}^{+}$. Pulsed laser ablation solves both of these problems by utilizing compound barium sources while also giving some distinct advantages, such as fast loading, less displaced material, and lower heat load near the ion trap. Because of the relatively low abundances of the isotopes of interest, a two-step photoionization technique is used, which gives us the ability to selectively load isotopes. Characterization of the ablation process for our ${\mathrm{BaCl}}_{2}$ targets are presented, including observation of neutral and ion ablation-fluence regimes, preparation and conditioning, lifetimes of ablation spots, and plume velocity distributions. We show that by using laser ablation on ${\mathrm{BaCl}}_{2}$ salt targets with a two-step photoionization method, we can produce and trap barium ions reliably. Furthermore, we demonstrate that with our photoionization method, we can trap $^{137}\mathrm{Ba}^{+}$ with an enhanced selectivity compared to its natural abundance.

DOI
10.1103/physreva.105.033102

Related papers

Microgram BaCl2 ablation targets for trapped ion experiments

Noah Greenberg, Akbar Jahangiri Jozani, Collin J. C. Epstein +3 more

Trapped ions for quantum information processing have been an area of intense study due to the extraordinarily high fidelity operations that have been reported experimentally. Specifically, barium trapped ions have been shown to have exceptional state-preparation and measurement fidelities. The 133Ba+ (I = 1/2) isotope in particular is a promising candidate for large-scale quantum computing experiments. However, a major pitfall with this isotope is that it is radioactive and is thus generally used in microgram quantities to satisfy safety regulations. We describe a new method for creating microgram barium chloride (BaCl2) ablation targets for use in trapped ion experiments and compare our procedure to previous methods. We outline two recipes for the fabrication of ablation targets that increase the production of neutral atoms for isotope-selective loading of barium ions. We show that heat-treatment of the ablation targets greatly increases the consistency at which neutral atoms can be produced, and we characterize the uniformity of these targets using trap-independent techniques such as energy dispersive x-ray spectroscopy and neutral fluorescence collection. Our comparison between fabrication techniques and the demonstration of consistent neutral fluorescence paves a path toward reliable loading of 133Ba+ in surface traps and opens opportunities for scalable quantum computing with this isotope.

arXiv:2402.06632•Review of Scientific Instruments•Apr 1, 2024•2 citations

Ablation loading of barium ions into a surface-electrode trap

Xiaoyang Shi, Susanna Todaro, Gabriel Mintzer +3 more

Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.

arXiv:2303.02143•Applied Physics Letters•Jun 26, 2023•9 citations

Towards Selective Two-step Photoionization of Ba Isotopes for Ba+ Ion Trap

Tamura Koji, Ogura Koichi, Shimada Hiroyuki +5 more

Cooling and trapping ion system is considered as a promising candidate for quantum information processor. Especially, by manipulating 133Ba+ ion, improved fidelity of qubit operation is expected, where selective 133Ba isotope introduction to the ion trap is required. Development of isotope selective loading system of Ba ion for the ion trap using the two-step laser photoionization is shown. For the excitation step (791 nm), the target isotope atom is photo-excited among other Ba isotopes based on their isotope shift. A tunable laser with a narrow spectral linewidth compared to the Ba isotope shift, was developed using an external cavity diode laser (ECDL). Mode-hop-free (MHF) scanning was achieved. For the second ionization step, a pulsed N2 laser was used. Both laser beams were combined using a mirror, focused with a lens, and introduced into a vacuum chamber. An atomic source was made by resistive heating, which can heat the source and generate atomic beam with sufficient vapor pressure and atomic density for the measurements. The system is under development and is prepared for the Ba atomic beam generation and laser photoionization experiments.

•Jul 4, 2024•0 citations

Trapping Ba+ with seven-fold enhanced efficiency utilizing an autoionizing resonance

Noah Greenberg, Brendan White, Pei Jiang Low +1 more

Abstract Trapped ions have emerged as a front runner in quantum information processing due to their identical nature, all-to-all connectivity, and high fidelity quantum operations. As current trapped ion technologies are scaled, it will be important to improve the efficiency of loading ions, especially when working with long chains of ions or rare isotopes. Here, we compare two different isotope-selective photoionization schemes for loading 138 Ba + ions. We show that a two-step photoionization scheme ending in an autoionizing transition increases the ion loading rate nearly an order of magnitude compared to an established technique which does not excite an autoionizing state. Our novel photoionization scheme can be extended to all isotopes of barium. Given that autoionizing resonances exist in every trapped ion species, exploitation of this process is a promising pathway to increase the loading rates for trapped ion computers.

arXiv:2307.07627•Quantum Science and Technology•Apr 16, 2024•4 citations

A comparison of calcium sources for ion-trap loading via laser ablation

D. S. Smith, Silpa Muralidharan, Roland Hablützel +6 more

Trapped-ion technology is a leading approach for scalable quantum computing. A key element of ion trapping is reliable loading of atomic sources into the trap. While thermal atomic ovens have traditionally been used for this purpose, laser ablation has emerged as a viable alternative in recent years, offering the advantages of faster and more localized loading with lower heat dissipation. Calcium is a well-established ion for qubit applications. Here we examine a range of calcium sources for ablation and provide a comprehensive analysis of each. We consider factors such as ease of use, temperature and yield of the ablation plume, and the lifetime of ablation spots. For each target, we estimate the number of trappable atoms per ablation pulse for a typical surface and 3D ion trap.

arXiv:2503.10329•Applied Physics B•Jul 21, 2025•6 citations

Rapid high-purity loading of barium ion via relayed selectivity from naturally abundant source

Zichun Zhou, Xuhui Yao, Jiaze Li +5 more

Trapped ions is one of the promising platforms for realizing quantum information processing and quantum simulation. Selective and rapid loading of a specific isotope lays the critical foundation for such purpose particularly when scaling up the system size. Here we demonstrate a new method for rapid isotope-selective loading of $^{137}\mathrm{Ba}^{+}$ or $^{135}\mathrm{Ba}^{+}$, two types of promising ion qubits, from naturally abundant source using a three-step, ultraviolet-free photoionization scheme. Neutral atoms are selected on the narrow 791 nm $6s^2\,{}^1S_0\rightarrow6s6p\,{}^3P_1^o$ transition, resonantly transferred at 554 nm to $6s6d\,{}^3D_1$, and ionized using an existing 532 nm Raman beam. A spectral-overlap analysis based on isotope and hyperfine shifts shows relayed selectivity that the second step can further suppress undesired-isotope excitation and no contaminant ion is detected during our entire experiment. Besides, the resonant drive of the second step excitation yields a prominent loading rate of the selected species. This strategy using multi-step excitations to establish relayed selectivity can be extended to high-purity loading of other species of ions.

arXiv:2611.11990•Nov 9, 2026•0 citations
The 133Ba+^{133}\mathrm{Ba}^{+}133Ba+ ion is a promising candidate as a high-fidelity qubit, and the 137Ba+^{137}\mathrm{Ba}^{+}137Ba+ isotope is promising as a high-fidelity qudit (d>2)(d>2)(d>2). Barium metal is very reactive, and 133Ba+^{133}\mathrm{Ba}^{+}133Ba+ is radioactive and can only be sourced in small quantities, so the most commonly used loading method, oven heating, is less suited for barium and is currently not possible for 133Ba+^{133}\mathrm{Ba}^{+}133Ba+. Pulsed laser ablation solves both of these problems by utilizing compound barium sources while also giving some distinct advantages, such as fast loading, less displaced material, and lower heat load near the ion trap. Because of the relatively low abundances of the isotopes of interest, a two-step photoionization technique is used, which gives us the ability to selectively load isotopes. Characterization of the ablation process for our BaCl2{\mathrm{BaCl}}_{2}BaCl2​ targets are presented, including observation of neutral and ion ablation-fluence regimes, preparation and conditioning, lifetimes of ablation spots, and plume velocity distributions. We show that by using laser ablation on BaCl2{\mathrm{BaCl}}_{2}BaCl2​ salt targets with a two-step photoionization method, we can produce and trap barium ions reliably. Furthermore, we demonstrate that with our photoionization method, we can trap 137Ba+^{137}\mathrm{Ba}^{+}137Ba+ with an enhanced selectivity compared to its natural abundance.
Trapped ions for quantum information processing have been an area of intense study due to the extraordinarily high fidelity operations that have been reported experimentally. Specifically, barium trapped ions have been shown to have exceptional state-preparation and measurement fidelities. The 133Ba+ (I = 1/2) isotope in particular is a promising candidate for large-scale quantum computing experiments. However, a major pitfall with this isotope is that it is radioactive and is thus generally used in microgram quantities to satisfy safety regulations. We describe a new method for creating microgram barium chloride (BaCl2) ablation targets for use in trapped ion experiments and compare our procedure to previous methods. We outline two recipes for the fabrication of ablation targets that increase the production of neutral atoms for isotope-selective loading of barium ions. We show that heat-treatment of the ablation targets greatly increases the consistency at which neutral atoms can be produced, and we characterize the uniformity of these targets using trap-independent techniques such as energy dispersive x-ray spectroscopy and neutral fluorescence collection. Our comparison between fabrication techniques and the demonstration of consistent neutral fluorescence paves a path toward reliable loading of 133Ba+ in surface traps and opens opportunities for scalable quantum computing with this isotope.
Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.
Cooling and trapping ion system is considered as a promising candidate for quantum information processor. Especially, by manipulating 133Ba+ ion, improved fidelity of qubit operation is expected, where selective 133Ba isotope introduction to the ion trap is required. Development of isotope selective loading system of Ba ion for the ion trap using the two-step laser photoionization is shown. For the excitation step (791 nm), the target isotope atom is photo-excited among other Ba isotopes based on their isotope shift. A tunable laser with a narrow spectral linewidth compared to the Ba isotope shift, was developed using an external cavity diode laser (ECDL). Mode-hop-free (MHF) scanning was achieved. For the second ionization step, a pulsed N2 laser was used. Both laser beams were combined using a mirror, focused with a lens, and introduced into a vacuum chamber. An atomic source was made by resistive heating, which can heat the source and generate atomic beam with sufficient vapor pressure and atomic density for the measurements. The system is under development and is prepared for the Ba atomic beam generation and laser photoionization experiments.
Abstract Trapped ions have emerged as a front runner in quantum information processing due to their identical nature, all-to-all connectivity, and high fidelity quantum operations. As current trapped ion technologies are scaled, it will be important to improve the efficiency of loading ions, especially when working with long chains of ions or rare isotopes. Here, we compare two different isotope-selective photoionization schemes for loading 138 Ba + ions. We show that a two-step photoionization scheme ending in an autoionizing transition increases the ion loading rate nearly an order of magnitude compared to an established technique which does not excite an autoionizing state. Our novel photoionization scheme can be extended to all isotopes of barium. Given that autoionizing resonances exist in every trapped ion species, exploitation of this process is a promising pathway to increase the loading rates for trapped ion computers.
Trapped-ion technology is a leading approach for scalable quantum computing. A key element of ion trapping is reliable loading of atomic sources into the trap. While thermal atomic ovens have traditionally been used for this purpose, laser ablation has emerged as a viable alternative in recent years, offering the advantages of faster and more localized loading with lower heat dissipation. Calcium is a well-established ion for qubit applications. Here we examine a range of calcium sources for ablation and provide a comprehensive analysis of each. We consider factors such as ease of use, temperature and yield of the ablation plume, and the lifetime of ablation spots. For each target, we estimate the number of trappable atoms per ablation pulse for a typical surface and 3D ion trap.
Trapped ions is one of the promising platforms for realizing quantum information processing and quantum simulation. Selective and rapid loading of a specific isotope lays the critical foundation for such purpose particularly when scaling up the system size. Here we demonstrate a new method for rapid isotope-selective loading of 137Ba+^{137}\mathrm{Ba}^{+}137Ba+ or 135Ba+^{135}\mathrm{Ba}^{+}135Ba+, two types of promising ion qubits, from naturally abundant source using a three-step, ultraviolet-free photoionization scheme. Neutral atoms are selected on the narrow 791 nm 6s2 1S0→6s6p 3P1o6s^2\,{}^1S_0\rightarrow6s6p\,{}^3P_1^o6s21S0​→6s6p3P1o​ transition, resonantly transferred at 554 nm to 6s6d 3D16s6d\,{}^3D_16s6d3D1​, and ionized using an existing 532 nm Raman beam. A spectral-overlap analysis based on isotope and hyperfine shifts shows relayed selectivity that the second step can further suppress undesired-isotope excitation and no contaminant ion is detected during our entire experiment. Besides, the resonant drive of the second step excitation yields a prominent loading rate of the selected species. This strategy using multi-step excitations to establish relayed selectivity can be extended to high-purity loading of other species of ions.