Quantized conductance in hybrid split-gate arrays of superconducting quantum point contacts with semiconducting two-dimensional electron systems
Kaveh Delfanazari, Jiahui Li, Yusheng Xiong, Pengcheng Ma, Reuben K. Puddy, Teng Yi, Ian A. Farrer, Sachio Komori, Jason W. A. Robinson, Llorenç Serra, D. A. Ritchie, Michael Joseph Kelly, Hannah Jane Joyce, Charles G. Smith
A quantum point contact (QPC)—a constriction in a semiconducting two-dimensional electron system with a quantized conductance—is a building block of novel spintronic and topological electronic circuits. QPCs can also be used as readout electronics, charge sensors, or switches in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a Cooper-pair QPC analogue known as a superconducting quantum point contact (SQPC). The technological development of such quantum devices has been prolonged due to the challenges of maintaining their geometrical requirement and near-unity superconductor-semiconductor interface transparency. Here, we develop advanced nanofabrication, material and device engineering techniques and report on an innovative realization of nanoscale hybrid SQPC arrays with split gate technology in semiconducting 2D electron systems. We exploit the special gate tunability of the quantum wells, and demonstrate the first experimental observation of conductance quantization in hybrid InGaAs-Nb SQPCs. We observe reproducible quantized conductance at zero magnetic fields in multiple quantum nanodevices fabricated in a single chip and systematically investigate the quantum transport of SQPCs at low and high magnetic fields for their potential applications in quantum metrology, for extremely accurate voltage standards, and fault-tolerant quantum technologies. Published by the American Physical Society 2024
A quantum point contact (QPC)—a constriction in a semiconducting two-dimensional electron system with a quantized conductance—is a building block of novel spintronic and topological electronic circuits. QPCs can also be used as readout electronics, charge sensors, or switches in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a Cooper-pair QPC analogue known as a superconducting quantum point contact (SQPC). The technological development of such quantum devices has been prolonged due to the challenges of maintaining their geometrical requirement and near-unity superconductor-semiconductor interface transparency. Here, we develop advanced nanofabrication, material and device engineering techniques and report on an innovative realization of nanoscale hybrid SQPC arrays with split gate technology in semiconducting 2D electron systems. We exploit the special gate tunability of the quantum wells, and demonstrate the first experimental observation of conductance quantization in hybrid InGaAs-Nb SQPCs. We observe reproducible quantized conductance at zero magnetic fields in multiple quantum nanodevices fabricated in a single chip and systematically investigate the quantum transport of SQPCs at low and high magnetic fields for their potential applications in quantum metrology, for extremely accurate voltage standards, and fault-tolerant quantum technologies. Published by the American Physical Society 2024
Hybrid superconducting-semiconducting circuits provide a versatile platform for investigating coherent transport in mesoscopic weak links. Superconducting quantum point contacts (SQPCs) are particularly interesting in this context, as their supercurrent is carried by a discrete number of ballistic transport modes. Here, we investigate a gate-tunable superconducting quantum point contact realized in Ge/SiGe. By incorporating the QPC into a highly asymmetric superconducting quantum interference device (SQUID), we gain access to its current-phase relation (CPR) and switching current, enabling phase-sensitive studies of few-mode superconducting transport. We observe a direct correspondence between conductance quantization and switching-current quantization, linking the normal-state transport modes to the superconducting response. In addition, we demonstrate strong gate tunability of the effective transmission near the onset of the first conductance plateau. Under microwave irradiation, the QPC exhibits photon-assisted multiple Andreev reflections at lower transparencies and Shapiro replicas in the high-transparency, few-mode regime.
Abstract Stable, reproducible, scalable, addressable, and controllable hybrid superconductor–semiconductor (S–Sm) junctions and switches are key circuit elements and building blocks of gate‐based quantum processors. The electrostatic field effect produced by the split gate voltages facilitates the realization of nano‐switches that can control the conductance or current in the hybrid S–Sm circuits based on 2D semiconducting electron systems. Here, a novel realization of large‐scale scalable, and gate voltage controllable hybrid field effect quantum chips is experimentally demonstrated. Each chip contains arrays of split gate field effect hybrid junctions, that work as conductance switches, and are made from In0.75Ga0.25As quantum wells integrated with Nb superconducting electronic circuits. Each hybrid junction in the chip can be controlled and addressed through its corresponding source–drain and two global split gate contact pads that allow switching between their (super)conducting and insulating states. A total of 18 quantum chips are fabricated with 144 field effect hybrid Nb‐ In0.75Ga0.25As 2DEG‐Nb quantum wires and the electrical response, switching voltage (on/off) statistics, quantum yield, and reproducibility of several devices at cryogenic temperatures are investigated. The proposed integrated quantum device architecture allows control of individual junctions in a large array on a chip useful for emerging cryogenic quantum technologies.
A practical quantum computer demands a physical quantum bit (qubit) that is scalable, has a well-defined initial state, and brings together coherence with reliable control and read-out. A compelling idea is to put together a locally protected Majorana qubit with a superconducting qubit. The superconducting qubit is used to read out the Majorana states while the Majorana qubit may act as a quantum memory. This thesis presents a series of studies on quantum transport in semiconducting nanowires coupled to superconductors to investigate various platforms for realizing Majorana. These studies are followed by microwave measurements on superconducting circuits compatible with semiconducting-superconducting heterostructures. We first evaluate the potential of Ge/Si core/shell nanowires by achieving induced superconductivity as well as estimating spin-orbit coupling. Next we explore the transport mediated by Andreev bound states formed in InSb nanowire quantum. A subgap negative differential conductance is investigated together with the coalescing Andreev resonances at zero bias relevant for the correct interpretation of Majorana experiments done on the same structures. We conclude our studies of semiconducting nanowires by exploring tunnel junctions in Sn-InSb nanowires that are prepared by in-situ shadowing using nearby nanowires and flakes. Tin shells are found to induce a hard superconducting gap persisting up to high magnetic fields. We observe the two-electron charging effect from a small superconducting island of Sn-InSb. This effect is attributed to charge parity stability, which makes this nanowire system an intriguing candidate for superconducting and topological quantum circuits. These Sn-InSb junctions are then used as the nonlinear element in a transmon qubit design where we observe a dispersive coupling between this nanowire Josephson junction and a superconducting resonator. We also present our progress towards building a magnetic field resilient superconducting circuit that allows integration with semiconducting and topological structures. In the last chapter, InSb semiconducting nanowires are utilized as shadow masks prior to superconductor deposition on an InAs quantum well. We study Josephson current properties in Josephson junctions made from these nanowire shadows. Our results point to highly transparent junctions that can be developed further for hybrid superconductor-semiconductor qubit systems.
Hybrid systems comprising superconducting and semiconducting materials are promising architectures for quantum computing. Superconductors induce long-range interactions between the spin degrees of freedom of semiconducting quantum dots. These interactions are widely anisotropic when the semiconductor material has strong spin-orbit interactions. We show that this anisotropy is tunable and enables fast and high-fidelity two-qubit gates between singlet-triplet (ST) spin qubits. Our design is immune to leakage of the quantum information into noncomputational states and removes always-on interactions between the qubits, thus resolving key open challenges for these architectures. Our ST qubits do not require additional technologically demanding components nor fine-tuning of parameters. They operate at low magnetic fields of a few millitesla and are fully compatible with superconductors. By suppressing systematic errors in realistic devices, we estimate infidelities below ${10}^{\ensuremath{-}3}$, which could pave the way toward large-scale hybrid superconducting-semiconducting quantum processors.
As the field of superconducting quantum technology progresses beyond single-qubit control, scalable and multifunctional quantum architectures become increasingly vital. A central challenge is integrating fast, controllable superconducting circuits with components that offer longer coherence, richer physics, or new functionalities. Hybrid quantum systems, where superconducting microwave resonators interface with semiconducting or magnetic subsystems, have the capabilities to fulfil this need, yet they face significant engineering obstacles. Conventional superconducting resonator designs struggle under magnetic field biasing and electrostatic gating, both of which are essential for coupling to spin-based, semiconductor, or magnonic elements.This thesis explores solutions to these bottlenecks through the development of magnetic-field-resilient coplanar stripline (CPS) resonators based on thin-film NbTiN. These resonators retain a stable resonance frequency in in-plane magnetic fields up to 1T, can have high kinetic inductance and offer broad geometrical tunability, enabling strong and ultrastrong coupling to charge- and spin-based quantum systems. In the superconducting–semiconductor domain, we demonstrate high-impedance CPS resonators inductively coupled to Josephson junctions hosting Andreev bound states (ABSs), revealing both coherent pair transitions and single-quasiparticle excitations near the ultrastrong coupling regime. This opens the door to fast, gate-tunable qubits based on microscopic ABSs, distinct from conventional macroscopic qubit architectures, and lays the groundwork for spin–photon hybridisation, non-perturbative light–matter interactions, and parity-based quantum logic.In parallel, this work investigates rare-earth iron garnet (ReIG) ferrimagnetic insulators as low-loss spin-wave media compatible with superconducting devices. In sputtered thin-film thulium iron garnet (TmIG) with perpendicular magnetic anisotropy, we observe deterministic spin-orbit torque switching and multiple magnetisation polarity reversals. These properties showcase the attractiveness of TmIG both for low-dissipation magnonic information transport and as magnetic interfaces for superconducting hybrid devices. Taken together, the results of this thesis establish materials, device concepts, and measurement strategies for novel classes of hybrid quantum systems that combine robust superconducting circuitry, electrostatically tunable semiconductor excitations, and industry-scalable magnetic elements and pave the way for next-generation hybrid quantum systems. More broadly, they provide concrete routes to overcoming limitations of existing hybrid platforms and advance the development of versatile, low-dissipation quantum technologies.