Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2307.04355 · Advanced Electronic Materials

Large‐Scale On‐Chip Integration of Gate‐Voltage Addressable Hybrid Superconductor–Semiconductor Quantum Wells Field Effect Nano‐Switch Arrays

Kaveh Delfanazari, Jiahui Li, Pengcheng Ma, Reuben K. Puddy, Teng Yi, Yusheng Xiong, Ian A. Farrer, Sachio Komori, Jason W. A. Robinson, D. A. Ritchie, Michael Joseph Kelly, Hannah Jane Joyce, Charles G. Smith

Published Oct 22, 2023• 17 citations
arXivHTMLPDF

Abstract

Abstract Stable, reproducible, scalable, addressable, and controllable hybrid superconductor–semiconductor (S–Sm) junctions and switches are key circuit elements and building blocks of gate‐based quantum processors. The electrostatic field effect produced by the split gate voltages facilitates the realization of nano‐switches that can control the conductance or current in the hybrid S–Sm circuits based on 2D semiconducting electron systems. Here, a novel realization of large‐scale scalable, and gate voltage controllable hybrid field effect quantum chips is experimentally demonstrated. Each chip contains arrays of split gate field effect hybrid junctions, that work as conductance switches, and are made from In0.75Ga0.25As quantum wells integrated with Nb superconducting electronic circuits. Each hybrid junction in the chip can be controlled and addressed through its corresponding source–drain and two global split gate contact pads that allow switching between their (super)conducting and insulating states. A total of 18 quantum chips are fabricated with 144 field effect hybrid Nb‐ In0.75Ga0.25As 2DEG‐Nb quantum wires and the electrical response, switching voltage (on/off) statistics, quantum yield, and reproducibility of several devices at cryogenic temperatures are investigated. The proposed integrated quantum device architecture allows control of individual junctions in a large array on a chip useful for emerging cryogenic quantum technologies.

DOI
10.1002/aelm.202300453

Related papers

On-chip Hybrid Superconducting-Semiconducting Quantum Circuit

Kaveh Delfanazari, Michael Joseph Kelly, Charles G. Smith +8 more

In this paper, we experimentally demonstrate a hybrid superconducting-semiconducting circuit consisting of eight planar and ballistic Nb-In0.75Ga0.25As-Nb Josephson junctions. E-beam lithography was used to fabricate the Josephson junctions on an InGaAs chip. In contrast to our previous studies on long junctions that were fabricated by photolithography, in this study, we observe the induced superconductivity in an In0.75Ga0.25As quantum well at higher temperatures, between T = 0.3 and 1 K (3He cryostat temperature range). The induced superconducting gap of Δind= 0.65 meV was measured at lowest base temperature T = 300 mK. The effect of temperature and magnetic fields B on the induced superconductivity are presented. Our results suggest that our In0.75Ga0.25As heterostructure is a promising scalable material system for quantum processing and computing applications.

IEEE Transactions on Applied Superconductivity•Mar 6, 2018•19 citations

Quantized conductance in hybrid split-gate arrays of superconducting quantum point contacts with semiconducting two-dimensional electron systems

Kaveh Delfanazari, Jiahui Li, Yusheng Xiong +11 more

A quantum point contact (QPC)—a constriction in a semiconducting two-dimensional electron system with a quantized conductance—is a building block of novel spintronic and topological electronic circuits. QPCs can also be used as readout electronics, charge sensors, or switches in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a Cooper-pair QPC analogue known as a superconducting quantum point contact (SQPC). The technological development of such quantum devices has been prolonged due to the challenges of maintaining their geometrical requirement and near-unity superconductor-semiconductor interface transparency. Here, we develop advanced nanofabrication, material and device engineering techniques and report on an innovative realization of nanoscale hybrid SQPC arrays with split gate technology in semiconducting 2D electron systems. We exploit the special gate tunability of the quantum wells, and demonstrate the first experimental observation of conductance quantization in hybrid InGaAs-Nb SQPCs. We observe reproducible quantized conductance at zero magnetic fields in multiple quantum nanodevices fabricated in a single chip and systematically investigate the quantum transport of SQPCs at low and high magnetic fields for their potential applications in quantum metrology, for extremely accurate voltage standards, and fault-tolerant quantum technologies. Published by the American Physical Society 2024

arXiv:2312.11248•Physical Review Applied•Jan 25, 2024•13 citations

On-chip hybrid Superconducting-Semiconducting Circuit

Kaveh Delfanazari, Reuben K. Puddy, Ma, P +8 more

In this paper, we experimentally demonstrate a hybrid superconducting-semiconducting (S-Sm) circuit consisting of eight planar and ballistic Nb-In0.75Ga0.25As-Nb Josephson junctions. E-beam lithography was used to fabricate the Josephson junctions on an InGaAs chip. In contrast to our previous studies on long junctions that were fabricated by photolithography, in this study, we observe the induced superconductivity in an In0.75Ga0.25As quantum well at higher temperatures, between T= 0.3 and 1.4 K (3He cryostat temperature range). The induced superconducting gap of & #x0394;ind= 0.65 meV was measured at lowest base temperature T= 300 mK. The effect of temperature and magnetic fields B on the induced superconductivity are presented. Our results suggest that our In0.75Ga0.25As heterojunctions is a promising scalable material system for quantum processing and computing applications.

•Mar 6, 2018•0 citations

InAs on Insulator: A New Platform for Cryogenic Hybrid Superconducting Electronics

Alessandro Paghi, Giacomo Trupiano, Giorgio De Simoni +3 more

Abstract Superconducting circuits based on hybrid InAs Josephson Junctions (JJs) play a starring role in the design of fast and ultra‐low power consumption solid‐state quantum electronics and exploring novel physical phenomena. Conventionally, 3D substrates, 2D quantum wells (QWs), and 1D nanowires (NWs) made of InAs are employed to create superconducting circuits with hybrid JJs. Each platform has its advantages and disadvantages. Here, the InAs‐on‐insulator (InAsOI) is proposed as a groundbreaking platform for developing superconducting electronics. An epilayer of semiconducting InAs with different electron densities is grown onto an InAlAs metamorphic buffer, efficiently used as a cryogenic insulator to decouple adjacent devices electrically. JJs with various lengths and widths are fabricated employing Al as a superconductor and InAs with different electron densities. A switching current density of 7.3 µA µm−1, a critical voltage of 50‐to‐80 µV, and a critical temperature equal to that of the superconductor used are achieved. For all the JJs, the switching current follows a Fraunhofer‐like pattern with the out‐of‐plane magnetic field. These achievements enable the use of InAsOI to design and fabricate surface‐exposed Josephson Field Effect Transistors with high critical current densities and superior gating properties.

arXiv:2405.07630•Advanced Functional Materials•Nov 29, 2024•13 citations

Transistors to transmons: large-scale cryogenic CMOS control of superconducting qubits

Devin Underwood

Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.

•Jul 3, 2026•0 citations

(invited) Quantum integrated circuits based on superconducting two-dimensional electron gas platform

Kaveh Delfanazari, Pengfei Ma, Ian A. Farrer +4 more

...we introduced an integrated circuit consisting of arrays of planar Josephson junctions based on two-dimensional electron gas (2DEG) in In0.75Ga0.25As heterostructure. The methods that are used for ballistic 2D Josephson junction and hybrid quantum integrated circuit fabrication will be demonstrated. Furthermore, the temperature and magnetic field dependencies of the phase coherent quantum transport in 2D Josephson junctions, the induced superconducting properties into 2DEG, and the subharmonic energy gap structures (SGS) due to Andreev reflections at the S-Sm interfaces will be discussed. Reference: [1] K. Delfanazari, et al, Adv. Mater. 29, 1701836 (2017). [2] K. Delfanazari, et al, J. Magn. Magn. Mater. 459, 282-284 (2018). [3] K. Delfanazari, et al, IEEE Trans. Appl. Supercond. 28, 1100304 (2018).

•Dec 1, 2018•0 citations
Abstract Stable, reproducible, scalable, addressable, and controllable hybrid superconductor–semiconductor (S–Sm) junctions and switches are key circuit elements and building blocks of gate‐based quantum processors. The electrostatic field effect produced by the split gate voltages facilitates the realization of nano‐switches that can control the conductance or current in the hybrid S–Sm circuits based on 2D semiconducting electron systems. Here, a novel realization of large‐scale scalable, and gate voltage controllable hybrid field effect quantum chips is experimentally demonstrated. Each chip contains arrays of split gate field effect hybrid junctions, that work as conductance switches, and are made from In0.75Ga0.25As quantum wells integrated with Nb superconducting electronic circuits. Each hybrid junction in the chip can be controlled and addressed through its corresponding source–drain and two global split gate contact pads that allow switching between their (super)conducting and insulating states. A total of 18 quantum chips are fabricated with 144 field effect hybrid Nb‐ In0.75Ga0.25As 2DEG‐Nb quantum wires and the electrical response, switching voltage (on/off) statistics, quantum yield, and reproducibility of several devices at cryogenic temperatures are investigated. The proposed integrated quantum device architecture allows control of individual junctions in a large array on a chip useful for emerging cryogenic quantum technologies.
In this paper, we experimentally demonstrate a hybrid superconducting-semiconducting circuit consisting of eight planar and ballistic Nb-In0.75Ga0.25As-Nb Josephson junctions. E-beam lithography was used to fabricate the Josephson junctions on an InGaAs chip. In contrast to our previous studies on long junctions that were fabricated by photolithography, in this study, we observe the induced superconductivity in an In0.75Ga0.25As quantum well at higher temperatures, between T = 0.3 and 1 K (3He cryostat temperature range). The induced superconducting gap of Δind= 0.65 meV was measured at lowest base temperature T = 300 mK. The effect of temperature and magnetic fields B on the induced superconductivity are presented. Our results suggest that our In0.75Ga0.25As heterostructure is a promising scalable material system for quantum processing and computing applications.
A quantum point contact (QPC)—a constriction in a semiconducting two-dimensional electron system with a quantized conductance—is a building block of novel spintronic and topological electronic circuits. QPCs can also be used as readout electronics, charge sensors, or switches in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a Cooper-pair QPC analogue known as a superconducting quantum point contact (SQPC). The technological development of such quantum devices has been prolonged due to the challenges of maintaining their geometrical requirement and near-unity superconductor-semiconductor interface transparency. Here, we develop advanced nanofabrication, material and device engineering techniques and report on an innovative realization of nanoscale hybrid SQPC arrays with split gate technology in semiconducting 2D electron systems. We exploit the special gate tunability of the quantum wells, and demonstrate the first experimental observation of conductance quantization in hybrid InGaAs-Nb SQPCs. We observe reproducible quantized conductance at zero magnetic fields in multiple quantum nanodevices fabricated in a single chip and systematically investigate the quantum transport of SQPCs at low and high magnetic fields for their potential applications in quantum metrology, for extremely accurate voltage standards, and fault-tolerant quantum technologies. Published by the American Physical Society 2024
In this paper, we experimentally demonstrate a hybrid superconducting-semiconducting (S-Sm) circuit consisting of eight planar and ballistic Nb-In0.75Ga0.25As-Nb Josephson junctions. E-beam lithography was used to fabricate the Josephson junctions on an InGaAs chip. In contrast to our previous studies on long junctions that were fabricated by photolithography, in this study, we observe the induced superconductivity in an In0.75Ga0.25As quantum well at higher temperatures, between T= 0.3 and 1.4 K (3He cryostat temperature range). The induced superconducting gap of & #x0394;ind= 0.65 meV was measured at lowest base temperature T= 300 mK. The effect of temperature and magnetic fields B on the induced superconductivity are presented. Our results suggest that our In0.75Ga0.25As heterojunctions is a promising scalable material system for quantum processing and computing applications.
Abstract Superconducting circuits based on hybrid InAs Josephson Junctions (JJs) play a starring role in the design of fast and ultra‐low power consumption solid‐state quantum electronics and exploring novel physical phenomena. Conventionally, 3D substrates, 2D quantum wells (QWs), and 1D nanowires (NWs) made of InAs are employed to create superconducting circuits with hybrid JJs. Each platform has its advantages and disadvantages. Here, the InAs‐on‐insulator (InAsOI) is proposed as a groundbreaking platform for developing superconducting electronics. An epilayer of semiconducting InAs with different electron densities is grown onto an InAlAs metamorphic buffer, efficiently used as a cryogenic insulator to decouple adjacent devices electrically. JJs with various lengths and widths are fabricated employing Al as a superconductor and InAs with different electron densities. A switching current density of 7.3 µA µm−1, a critical voltage of 50‐to‐80 µV, and a critical temperature equal to that of the superconductor used are achieved. For all the JJs, the switching current follows a Fraunhofer‐like pattern with the out‐of‐plane magnetic field. These achievements enable the use of InAsOI to design and fabricate surface‐exposed Josephson Field Effect Transistors with high critical current densities and superior gating properties.
Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.
...we introduced an integrated circuit consisting of arrays of planar Josephson junctions based on two-dimensional electron gas (2DEG) in In0.75Ga0.25As heterostructure. The methods that are used for ballistic 2D Josephson junction and hybrid quantum integrated circuit fabrication will be demonstrated. Furthermore, the temperature and magnetic field dependencies of the phase coherent quantum transport in 2D Josephson junctions, the induced superconducting properties into 2DEG, and the subharmonic energy gap structures (SGS) due to Andreev reflections at the S-Sm interfaces will be discussed. Reference: [1] K. Delfanazari, et al, Adv. Mater. 29, 1701836 (2017). [2] K. Delfanazari, et al, J. Magn. Magn. Mater. 459, 282-284 (2018). [3] K. Delfanazari, et al, IEEE Trans. Appl. Supercond. 28, 1100304 (2018).