Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2311.13528

Improvements on Device Independent and Semi-Device Independent Protocols of Randomness Expansion

Rutvij Bhavsar

Published Nov 22, 2023• 5 citations
arXivHTMLPDF

Abstract

To generate genuine random numbers, random number generators based on quantum theory are essential. However, ensuring that the process used to produce randomness meets desired security standards can pose challenges for traditional quantum random number generators. This thesis delves into Device Independent (DI) and Semi-Device Independent (semi-DI) protocols of randomness expansion, based on a minimal set of experimentally verifiable security assumptions. The security in DI protocols relies on the violation of Bell inequalities, which certify the quantum behavior of devices. The semi-DI protocols discussed in this thesis require the characterization of only one device - a power meter. These protocols exploit the fact that quantum states can be prepared such that they cannot be distinguished with certainty, thereby creating a randomness resource. In this study, we introduce enhanced DI and semi-DI protocols that surpass existing ones in terms of output randomness rate, security, or in some instances, both. Our analysis employs the Entropy Accumulation Theorem (EAT) to determine the extractable randomness for finite rounds. A notable contribution is the introduction of randomness expansion protocols that recycle input randomness, significantly enhancing finite round randomness rates for DI protocols based on the CHSH inequality violation. In the final section of the thesis, we delve into Generalized Probability Theories (GPTs), with a focus on Boxworld, the largest GPT capable of producing correlations consistent with relativity. A tractable criterion for identifying a Boxworld channel is presented.

DOI
10.48550/arxiv.2311.13528

Related papers

Incorporating Zero-Probability Constraints to Device-Independent Randomness Expansion

Chun‐Yu Chen, Kai-Siang Chen, Kai-Min Chung +3 more

One of the distinguishing features of quantum theory is that its measurement outcomes are usually unpredictable or, equivalently, random. Moreover, this randomness is certifiable with minimal assumptions in the so-called device-independent (DI) paradigm, where a device's behavior does not need to be presupposed but can be verified through the statistics it produces. In this work, we explore various forms of randomness that are certifiable in this setting, where two users can perform two binary-outcome measurements on their shared entangled state. In this case, even though the Clauser-Horne-Shimony-Holt (CHSH) Bell-inequality violation is a pre-requisite for the generation of DI certifiable randomness, the CHSH value alone does not generally give a tight bound on the certifiable randomness. Here, we determine the certifiable randomness when zero-probability constraints are incorporated into the task of DI randomness expansion for the standard local and global randomness and the so-called "blind" randomness. Asymptotically, we observe consistent improvements in the amount of DI certifiable randomness (of all kinds) as we increase the number zero constraints for a wide range of given CHSH Bell violations. However, if we further optimize over the allowed CHSH values, then benefits of these additional constraints over the standard CHSH-based protocol are only found in the case of global and blind randomness. In contrast, in the regimes of finite data, these zero constraints only give a slight improvement in the local randomness rate when compared with all existing protocols.

arXiv:2401.08452•Jan 16, 2024•0 citations

Semi-Device-Independent Quantum Random Number Generator Resistant to General Attacks

Zhenguo Lu, Jundong Wu, Yu Zhang +4 more

Quantum random number generators (QRNGs) produce true random numbers based on the inherent randomness of quantum theory, rendering them a foundational segment of quantum cryptography. Distinguished from trusted-device QRNGs whose security depends on characterized devices, semi-device-independent (semi-DI) QRNGs permit partial devices to be defective or even maliciously manipulated, which achieves a good trade-off between generation rate and security. In this paper, we propose a semi-DI QRNG that resists general attacks while accounting for finite-size effects. The protocol requires no rigorous characterization of the source and measurement devices other than limiting the energy of the emitted states, significantly reducing the demands on practical QRNG systems. Leveraging the tight Kato inequality for correlated variables, we show that our protocol generates more randomness than it consumes. Furthermore, we demonstrate the scheme on a continuous-variable system with ternary inputs of states. Heterodyne detection is employed to enable phase compensation through data postprocessing, alleviating the stringent requirement on system stability. The system operates at 100 MHz, achieving a net random number generation rate of 1.165 Mbps at 5.3x10^9 rounds. Our work offers a promising approach to achieve both the robust security and high generation rate with a simple experimental setup.

quant-pharXiv:2602.06362•Physical Review Applied•Feb 9, 2026•3 citations

Higher rates for semi-device-independent randomness expansion by recycling input randomness

Rutvij Bhavsar, Hamid Tebyanian, Roger Colbeck

Although quantum random number generators rely on the inherent indeterminism of quantum mechanics, ensuring that the numbers produced are secure remains a significant challenge. We introduce two semi-device-independent randomness expansion protocols in a prepare-and-measure setting, where the source and measurement devices are treated as uncharacterised and we assume trust only in testing device, which could be implemented using a photodiode. One protocol achieves expansion by recycling the input randomness, while the other uses a biased input distribution to achieve expansion in settings where recycling is not possible. The protocols are proven secure against quantum side information. Our results show that high randomness rates are achievable under experimentally realistic conditions, with expansion obtained in as few as $10^5$ to $10^6$ rounds with the recycling protocol.

quant-pharXiv:2604.06457•Apr 9, 2026•3 citations

Simple and Tight Device-Independent Security Proofs

Rotem Arnon-Friedman, Renato Renner, Thomas Vidick

Device-independent security is the gold standard for quantum cryptography: not only is security based entirely on the laws of quantum mechanics, but it holds irrespective of any a priori assumptions on the quantum devices used in a protocol, making it particularly applicable in a quantum-wary environment. While the existence of device-independent protocols for tasks such as randomness expansion and quantum key distribution has recently been established, the underlying proofs of security remain very challenging, yield rather poor key rates, and demand very high quality quantum devices, thus making them all but impossible to implement in practice. We introduce a technique for the analysis of device-independent cryptographic protocols. We provide a flexible protocol and give a security proof that provides quantitative bounds that are asymptotically tight, even in the presence of general quantum adversaries. At a high level our approach amounts to establishing a reduction to the scenario in which the untrusted device operates in an identical and independent way in each round of the protocol. This is achieved by leveraging the sequential nature of the protocol and makes use of a newly developed tool, the “entropy accumulation theorem” of Dupuis, Fawzi, and Renner [ Entropy Accumulation, preprint, 2016]. As concrete applications we give simple and modular security proofs for device-independent quantum key distribution and randomness expansion protocols based on the CHSH inequality. For both tasks, we establish essentially optimal asymptotic key rates and noise tolerance. In view of recent experimental progress, which has culminated in loophole-free Bell tests, it is likely that these protocols can be practically implemented in the near future.

arXiv:1607.01797•SIAM Journal on Computing•Jan 1, 2019•179 citations

Security of Semi-Device-Independent Random Number Expansion Protocols

Dandan Li, Qiaoyan Wen, Yukun Wang +2 more

Semi-device-independent random number expansion (SDI-RNE) protocols require some truly random numbers to generate fresh ones, with making no assumptions on the internal working of quantum devices except for the dimension of the Hilbert space. The generated randomness is certified by non-classical correlation in the prepare-and-measure test. Until now, the analytical relations between the amount of the generated randomness and the degree of non-classical correlation, which are crucial for evaluating the security of SDI-RNE protocols, are not clear under both the ideal condition and the practical one. In the paper, first, we give the analytical relation between the above two factors under the ideal condition. As well, we derive the analytical relation under the practical conditions, where devices' behavior is not independent and identical in each round and there exists deviation in estimating the non-classical behavior of devices. Furthermore, we choose a different randomness extractor (i.e., two-universal random function) and give the security proof.

Scientific Reports•Oct 27, 2015•9 citations

A Framework for Quantum-Secure Device-Independent Randomness Expansion

Peter J. Brown, Sammy Ragy, Roger Colbeck

A device-independent randomness expansion protocol aims to take an initial random seed and generate a longer one without relying on details of how the devices operate for security. A large amount of work to date has focussed on a particular protocol based on spot-checking devices using the CHSH inequality. Here we show how to derive randomness expansion rates for a wide range of protocols, with security against a quantum adversary. Our technique uses semidefinite programming and a recent improvement of the entropy accumulation theorem. To support the work and facilitate its use, we provide code that can generate lower bounds on the amount of randomness that can be output based on the measured quantities in the protocol. As an application, we give a protocol that robustly generates up to two bits of randomness per entangled qubit pair, which is twice that established in existing analyses of the spot-checking CHSH protocol in the low noise regime.

arXiv:1810.13346•IEEE Transactions on Information Theory•Dec 17, 2019•53 citations
To generate genuine random numbers, random number generators based on quantum theory are essential. However, ensuring that the process used to produce randomness meets desired security standards can pose challenges for traditional quantum random number generators. This thesis delves into Device Independent (DI) and Semi-Device Independent (semi-DI) protocols of randomness expansion, based on a minimal set of experimentally verifiable security assumptions. The security in DI protocols relies on the violation of Bell inequalities, which certify the quantum behavior of devices. The semi-DI protocols discussed in this thesis require the characterization of only one device - a power meter. These protocols exploit the fact that quantum states can be prepared such that they cannot be distinguished with certainty, thereby creating a randomness resource. In this study, we introduce enhanced DI and semi-DI protocols that surpass existing ones in terms of output randomness rate, security, or in some instances, both. Our analysis employs the Entropy Accumulation Theorem (EAT) to determine the extractable randomness for finite rounds. A notable contribution is the introduction of randomness expansion protocols that recycle input randomness, significantly enhancing finite round randomness rates for DI protocols based on the CHSH inequality violation. In the final section of the thesis, we delve into Generalized Probability Theories (GPTs), with a focus on Boxworld, the largest GPT capable of producing correlations consistent with relativity. A tractable criterion for identifying a Boxworld channel is presented.
One of the distinguishing features of quantum theory is that its measurement outcomes are usually unpredictable or, equivalently, random. Moreover, this randomness is certifiable with minimal assumptions in the so-called device-independent (DI) paradigm, where a device's behavior does not need to be presupposed but can be verified through the statistics it produces. In this work, we explore various forms of randomness that are certifiable in this setting, where two users can perform two binary-outcome measurements on their shared entangled state. In this case, even though the Clauser-Horne-Shimony-Holt (CHSH) Bell-inequality violation is a pre-requisite for the generation of DI certifiable randomness, the CHSH value alone does not generally give a tight bound on the certifiable randomness. Here, we determine the certifiable randomness when zero-probability constraints are incorporated into the task of DI randomness expansion for the standard local and global randomness and the so-called "blind" randomness. Asymptotically, we observe consistent improvements in the amount of DI certifiable randomness (of all kinds) as we increase the number zero constraints for a wide range of given CHSH Bell violations. However, if we further optimize over the allowed CHSH values, then benefits of these additional constraints over the standard CHSH-based protocol are only found in the case of global and blind randomness. In contrast, in the regimes of finite data, these zero constraints only give a slight improvement in the local randomness rate when compared with all existing protocols.
Quantum random number generators (QRNGs) produce true random numbers based on the inherent randomness of quantum theory, rendering them a foundational segment of quantum cryptography. Distinguished from trusted-device QRNGs whose security depends on characterized devices, semi-device-independent (semi-DI) QRNGs permit partial devices to be defective or even maliciously manipulated, which achieves a good trade-off between generation rate and security. In this paper, we propose a semi-DI QRNG that resists general attacks while accounting for finite-size effects. The protocol requires no rigorous characterization of the source and measurement devices other than limiting the energy of the emitted states, significantly reducing the demands on practical QRNG systems. Leveraging the tight Kato inequality for correlated variables, we show that our protocol generates more randomness than it consumes. Furthermore, we demonstrate the scheme on a continuous-variable system with ternary inputs of states. Heterodyne detection is employed to enable phase compensation through data postprocessing, alleviating the stringent requirement on system stability. The system operates at 100 MHz, achieving a net random number generation rate of 1.165 Mbps at 5.3x10^9 rounds. Our work offers a promising approach to achieve both the robust security and high generation rate with a simple experimental setup.
Although quantum random number generators rely on the inherent indeterminism of quantum mechanics, ensuring that the numbers produced are secure remains a significant challenge. We introduce two semi-device-independent randomness expansion protocols in a prepare-and-measure setting, where the source and measurement devices are treated as uncharacterised and we assume trust only in testing device, which could be implemented using a photodiode. One protocol achieves expansion by recycling the input randomness, while the other uses a biased input distribution to achieve expansion in settings where recycling is not possible. The protocols are proven secure against quantum side information. Our results show that high randomness rates are achievable under experimentally realistic conditions, with expansion obtained in as few as 10510^5105 to 10610^6106 rounds with the recycling protocol.
Device-independent security is the gold standard for quantum cryptography: not only is security based entirely on the laws of quantum mechanics, but it holds irrespective of any a priori assumptions on the quantum devices used in a protocol, making it particularly applicable in a quantum-wary environment. While the existence of device-independent protocols for tasks such as randomness expansion and quantum key distribution has recently been established, the underlying proofs of security remain very challenging, yield rather poor key rates, and demand very high quality quantum devices, thus making them all but impossible to implement in practice. We introduce a technique for the analysis of device-independent cryptographic protocols. We provide a flexible protocol and give a security proof that provides quantitative bounds that are asymptotically tight, even in the presence of general quantum adversaries. At a high level our approach amounts to establishing a reduction to the scenario in which the untrusted device operates in an identical and independent way in each round of the protocol. This is achieved by leveraging the sequential nature of the protocol and makes use of a newly developed tool, the “entropy accumulation theorem” of Dupuis, Fawzi, and Renner [ Entropy Accumulation, preprint, 2016]. As concrete applications we give simple and modular security proofs for device-independent quantum key distribution and randomness expansion protocols based on the CHSH inequality. For both tasks, we establish essentially optimal asymptotic key rates and noise tolerance. In view of recent experimental progress, which has culminated in loophole-free Bell tests, it is likely that these protocols can be practically implemented in the near future.
Semi-device-independent random number expansion (SDI-RNE) protocols require some truly random numbers to generate fresh ones, with making no assumptions on the internal working of quantum devices except for the dimension of the Hilbert space. The generated randomness is certified by non-classical correlation in the prepare-and-measure test. Until now, the analytical relations between the amount of the generated randomness and the degree of non-classical correlation, which are crucial for evaluating the security of SDI-RNE protocols, are not clear under both the ideal condition and the practical one. In the paper, first, we give the analytical relation between the above two factors under the ideal condition. As well, we derive the analytical relation under the practical conditions, where devices' behavior is not independent and identical in each round and there exists deviation in estimating the non-classical behavior of devices. Furthermore, we choose a different randomness extractor (i.e., two-universal random function) and give the security proof.
A device-independent randomness expansion protocol aims to take an initial random seed and generate a longer one without relying on details of how the devices operate for security. A large amount of work to date has focussed on a particular protocol based on spot-checking devices using the CHSH inequality. Here we show how to derive randomness expansion rates for a wide range of protocols, with security against a quantum adversary. Our technique uses semidefinite programming and a recent improvement of the entropy accumulation theorem. To support the work and facilitate its use, we provide code that can generate lower bounds on the amount of randomness that can be output based on the measured quantities in the protocol. As an application, we give a protocol that robustly generates up to two bits of randomness per entangled qubit pair, which is twice that established in existing analyses of the spot-checking CHSH protocol in the low noise regime.