Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2309.05720 · PRX Quantum

Tunable Inductive Coupler for High-Fidelity Gates Between Fluxonium Qubits

Helin Zhang, Chunyang Ding, Daniel Weiss, Ziwen Huang, Yuwei Ma, Charles R. Guinn, Sara Sussman, Sai Pavan Chitta, Danyang Chen, Andrew Houck, Jens Koch, David Schuster

Published May 2, 2024• 76 citations
arXivHTMLPDF

Abstract

The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with approximately 50 -MHz frequencies and approximately 5 -GHz anharmonicities. The coupler enables the qubits to have a large tuning range of X X coupling strengths ( − 35 to 75 MHz). The Z Z coupling strength is < 3 kHz across the entire coupler bias range and < 100 Hz at the coupler off position. These qualities lead to fast high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a i SWAP gate in 258 ns with fidelity 99.72%, and by driving at the sum frequency of the two qubits, we achieve a b SWAP gate in 102 ns with fidelity 99.91%. This latter gate is only five qubit Larmor periods in length. We run cross-entropy benchmarking for over 20 consecutive hours and measure stable gate fidelities, with b SWAP drift ( 2 σ ) < 0.02 % and i SWAP drift < 0.08 % . Published by the American Physical Society 2024

DOI
10.1103/prxquantum.5.020326

Related papers

Coupler Microwave-Activated Controlled-Phase Gate on Fluxonium Qubits

Ilya A. Simakov, Grigoriy S. Mazhorin, Ilya N. Moskalenko +8 more

Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits.A tunable coupler typically includes a nonlinear element, such as a superconducting quantum interference device, which is used to tune the resonance frequency of an LC circuit connecting two qubits.Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.Because of strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states.Using this method, we experimentally demonstrate a controlled-Z gate of 44-ns duration on a fluxonium-based quantum processor, obtaining a fidelity of 97.6% ± 0.4% characterized by cross-entropy benchmarking.

arXiv:2302.09819•PRX Quantum•Nov 3, 2023•26 citations

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov +7 more

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

arXiv:2203.16302•npj Quantum Information•Nov 8, 2022•132 citations

High-Fidelity Two-Qubit Gates between Fluxonium Qubits with a Resonator Coupler

Emma Rosenfeld, Connor T. Hann, David Schuster +2 more

We take a bottom-up first-principles approach to designing a two-qubit gate between fluxonium qubits for minimal error, speed, and control simplicity. Our proposed architecture consists of two fluxoniums coupled via a resonator. The use of a simple linear coupler has many practical benefits, including the possibility of material optimization for suppressing loss, reducing fabrication complexity, and increasing yield by circumventing the need for Josephson junctions. Crucially, a resonator-as-coupler approach also suggests a clear path to increased connectivity between fluxonium qubits, by reducing capacitive loading when the coupler has a high impedance. After performing analytic and numerical analyses of the circuit Hamiltonian and gate dynamics, we tune circuit parameters to destructively interfere sources of coherent error, revealing an efficient fourth-order scaling of coherent error with gate duration. For component properties from the literature, we predict an open-system average controlled- Z () gate infidelity of 1.86 × 10 − 4 in 70 ns. Published by the American Physical Society 2024

arXiv:2403.07242•PRX Quantum•Nov 1, 2024•17 citations

Long-range tunable coupler for modular fluxonium quantum processors

Peng Zhao, Peng Xu, Zheng-Yuan Xue

The path toward practical superconducting quantum processors requires the integration of a large number of high-performance qubits. Modular architectures could offer a way to address the scaling limitations of monolithic designs by partitioning a large quantum processor into physically separated modules, or chiplets, linked through long-range interconnects. In this context, although fluxonium qubits have emerged as a compelling platform for quantum computing due to their long coherence times and high-fidelity gates, existing coupling schemes remain restricted to qubits in close proximity on a single chip. This limitation inherently precludes the long-range interconnects essential for modular integration. In this work, we propose a long-range tunable coupler designed to interconnect fluxonium qubits separated by more than one centimeter, thereby supporting the realization of modular fluxonium quantum processors. Under realistic assumptions, the proposed coupler has the potential to achieve inter-module two-qubit gate performance, specifically sub-100-ns gates with intrinsic errors below $10^{-4}$, comparable to that of intra-module (intra-chiplet) gates, while enabling modular integration with low quantum crosstalk, a key requirement for scalable systems. We further discuss the integration of this coupler into modular fluxonium lattices and explore its feasibility for achieving the higher connectivity and longer coupling range required for complex quantum error correction codes. This work could contribute to the development of large-scale fluxonium quantum processors by bridging their demonstrated potential with modular scalability.

quant-pharXiv:2604.12261•Apr 15, 2026•3 citations

Fast microwave-driven two-qubit gates between fluxonium qubits with a transmon coupler

Siddharth Singh, Eugene Y. Huang, Jinlun Hu +6 more

Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2$π$ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of $10^{-2}$ for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.

arXiv:2504.13718•Physical Review Applied•Oct 28, 2025•11 citations

Crosstalk in Multi-Qubit Fluxonium Architectures with Transmon Couplers

Martijn F. S. Zwanenburg, Christian Kraglund Andersen

In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below $10^{-4}$ by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.

quant-pharXiv:2603.09870•Physical Review Applied•Mar 11, 2026•7 citations
The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with approximately 50 -MHz frequencies and approximately 5 -GHz anharmonicities. The coupler enables the qubits to have a large tuning range of X X coupling strengths ( − 35 to 75 MHz). The Z Z coupling strength is < 3 kHz across the entire coupler bias range and < 100 Hz at the coupler off position. These qualities lead to fast high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a i SWAP gate in 258 ns with fidelity 99.72%, and by driving at the sum frequency of the two qubits, we achieve a b SWAP gate in 102 ns with fidelity 99.91%. This latter gate is only five qubit Larmor periods in length. We run cross-entropy benchmarking for over 20 consecutive hours and measure stable gate fidelities, with b SWAP drift ( 2 σ ) < 0.02 % and i SWAP drift < 0.08 % . Published by the American Physical Society 2024
Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits.A tunable coupler typically includes a nonlinear element, such as a superconducting quantum interference device, which is used to tune the resonance frequency of an LC circuit connecting two qubits.Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.Because of strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states.Using this method, we experimentally demonstrate a controlled-Z gate of 44-ns duration on a fluxonium-based quantum processor, obtaining a fidelity of 97.6% ± 0.4% characterized by cross-entropy benchmarking.
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.
We take a bottom-up first-principles approach to designing a two-qubit gate between fluxonium qubits for minimal error, speed, and control simplicity. Our proposed architecture consists of two fluxoniums coupled via a resonator. The use of a simple linear coupler has many practical benefits, including the possibility of material optimization for suppressing loss, reducing fabrication complexity, and increasing yield by circumventing the need for Josephson junctions. Crucially, a resonator-as-coupler approach also suggests a clear path to increased connectivity between fluxonium qubits, by reducing capacitive loading when the coupler has a high impedance. After performing analytic and numerical analyses of the circuit Hamiltonian and gate dynamics, we tune circuit parameters to destructively interfere sources of coherent error, revealing an efficient fourth-order scaling of coherent error with gate duration. For component properties from the literature, we predict an open-system average controlled- Z () gate infidelity of 1.86 × 10 − 4 in 70 ns. Published by the American Physical Society 2024
The path toward practical superconducting quantum processors requires the integration of a large number of high-performance qubits. Modular architectures could offer a way to address the scaling limitations of monolithic designs by partitioning a large quantum processor into physically separated modules, or chiplets, linked through long-range interconnects. In this context, although fluxonium qubits have emerged as a compelling platform for quantum computing due to their long coherence times and high-fidelity gates, existing coupling schemes remain restricted to qubits in close proximity on a single chip. This limitation inherently precludes the long-range interconnects essential for modular integration. In this work, we propose a long-range tunable coupler designed to interconnect fluxonium qubits separated by more than one centimeter, thereby supporting the realization of modular fluxonium quantum processors. Under realistic assumptions, the proposed coupler has the potential to achieve inter-module two-qubit gate performance, specifically sub-100-ns gates with intrinsic errors below 10−410^{-4}10−4, comparable to that of intra-module (intra-chiplet) gates, while enabling modular integration with low quantum crosstalk, a key requirement for scalable systems. We further discuss the integration of this coupler into modular fluxonium lattices and explore its feasibility for achieving the higher connectivity and longer coupling range required for complex quantum error correction codes. This work could contribute to the development of large-scale fluxonium quantum processors by bridging their demonstrated potential with modular scalability.
Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2πππ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of 10−210^{-2}10−2 for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.
In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10−410^{-4}10−4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.