In a recent work a quantum error mitigation protocol was applied to the expectation values obtained from circuits on the IBM Eagle quantum processor with up $127$ - qubits with up to $60 \; - \; \mbox{CNOT}$ layers. To benchmark the efficacy of this quantum protocol a physically motivated quantum circuit family was considered that allowed access to exact solutions in different regimes. The family interpolated between Clifford circuits and was additionally evaluated at low depth where exact validation is practical. It was observed that for highly entangling parameter regimes the circuits are beyond the validation of matrix product state and isometric tensor network state approximation methods. Here we compare the experimental results to matrix product operator simulations of the Heisenberg evolution, find they provide a closer approximation than these pure-state methods by exploiting the closeness to Clifford circuits and limited operator growth. Recently other approximation methods have been used to simulate the full circuit up to its largest extent. We observe a discrepancy of up to $20\%$ among the different classical approaches so far, an uncertainty comparable to the bootstrapped error bars of the experiment. Based on the different approximation schemes we propose modifications to the original circuit family that challenge the particular classical methods discussed here.
In a recent work a quantum error mitigation protocol was applied to the expectation values obtained from circuits on the IBM Eagle quantum processor with up 127 - qubits with up to 60−\mboxCNOT layers. To benchmark the efficacy of this quantum protocol a physically motivated quantum circuit family was considered that allowed access to exact solutions in different regimes. The family interpolated between Clifford circuits and was additionally evaluated at low depth where exact validation is practical. It was observed that for highly entangling parameter regimes the circuits are beyond the validation of matrix product state and isometric tensor network state approximation methods. Here we compare the experimental results to matrix product operator simulations of the Heisenberg evolution, find they provide a closer approximation than these pure-state methods by exploiting the closeness to Clifford circuits and limited operator growth. Recently other approximation methods have been used to simulate the full circuit up to its largest extent. We observe a discrepancy of up to 20% among the different classical approaches so far, an uncertainty comparable to the bootstrapped error bars of the experiment. Based on the different approximation schemes we propose modifications to the original circuit family that challenge the particular classical methods discussed here.
We present a simple, malleable and low-overhead approach for improving generic biased quantum error mitigation (QEM) methods, achieving up to 15% fidelity improvements over standard QEM on 100-qubit circuits with up to 2000 entangling gates. We do so by constructing verifiable benchmark circuits which mirror the application circuit's native-gate structure and thus noise profile. These circuits can be used to benchmark and mitigate the bias of the underlying error mitigation method, requiring only the application circuit and hardware native gate set. We present two methods for generating benchmark circuits; one is agnostic to the target hardware at the expense of a small overhead of single-qubit gates, while the other is specific to the IBM superconducting hardware and has no gate overhead. As a corollary, we introduce benchmarked-noise zero-noise extrapolation (bnZNE) as a simple adaptation of zero-noise extrapolation (ZNE), one of the most popular error mitigation methods. We consider as an example the bias-mitigated ZNE and bnZNE of Trotterized Hamiltonian simulations, observing that our approaches outperform standard ZNE using both small-scale classical simulations and 100-qubit utility-scale experiments on the IBM superconducting hardware. We consider the measurement of both single-site observables as well as two-site correlations along a one-dimensional qubit chain. We also provide a software package for implementing the error mitigation techniques used in this research.
Zero-noise extrapolation (ZNE) mitigates errors in near-term quantum devices by extrapolating measurements obtained at amplified noise levels to estimate noise-free expectation values. In practice, commonly used extrapolation models are fitted without enforcing physical constraints, which can yield predictions outside the valid range of quantum observables.
In this work, we introduce physically bounded variants of polynomial, exponential, and polynomial--exponential extrapolation models by explicitly parameterizing the zero-noise estimate and constraining it during optimization. We evaluate the approach using a large synthetic benchmark comprising 180,000 circuits and approximately 3.6 million ZNE experiments generated under realistic device noise models derived from IBM quantum backends. We also perform preliminary validation on real quantum hardware using GHZ and W-state circuits.
Across the synthetic benchmark, bounded extrapolation substantially reduces unphysical predictions and improves the stability of exponential- and polynomial--exponential-family models, whereas polynomial models show little difference between bounded and unbounded variants. Hardware experiments show similar qualitative behaviour: bounded models generally avoid pathological extrapolations and often provide a more reliable balance between accuracy and usable coverage. At the same time, the results highlight practical limitations of current devices, including stronger-than-expected noise effects and variability not fully captured by simulation models. These results suggest that enforcing physical constraints during extrapolation improves the reliability of ZNE and that this approach can be incorporated into existing workflows with minimal modification.
The pursuit of practical quantum utility on near-term quantum processors is critically challenged by their inherent noise. Quantum error mitigation (QEM) techniques are leading solutions to improve computation fidelity with relatively low qubit-overhead, while full-scale quantum error correction remains a distant goal. However, QEM techniques incur substantial measurement overheads, especially when applied to families of quantum circuits parameterized by classical inputs. Focusing on zero-noise extrapolation (ZNE), a widely adopted QEM technique, here we devise the surrogate-enabled ZNE (S-ZNE), which leverages classical learning surrogates to perform ZNE entirely on the classical side. Unlike conventional ZNE, whose measurement cost scales linearly with the number of circuits, S-ZNE requires only constant measurement overhead for an entire family of quantum circuits, offering superior scalability. Theoretical analysis indicates that S-ZNE achieves accuracy comparable to conventional ZNE in many practical scenarios, and numerical experiments on up to 100-qubit ground-state energy and quantum metrology tasks confirm its effectiveness. Our approach provides a template that can be effectively extended to other quantum error mitigation protocols, opening a promising path toward scalable error mitigation.
Abstract Quantum computing promises to offer substantial speed-ups over its classical counterpart for certain problems. However, the greatest impediment to realizing its full potential is noise that is inherent to these systems. The widely accepted solution to this challenge is the implementation of fault-tolerant quantum circuits, which is out of reach for current processors. Here we report experiments on a noisy 127-qubit processor and demonstrate the measurement of accurate expectation values for circuit volumes at a scale beyond brute-force classical computation. We argue that this represents evidence for the utility of quantum computing in a pre-fault-tolerant era. These experimental results are enabled by advances in the coherence and calibration of a superconducting processor at this scale and the ability to characterize 1 and controllably manipulate noise across such a large device. We establish the accuracy of the measured expectation values by comparing them with the output of exactly verifiable circuits. In the regime of strong entanglement, the quantum computer provides correct results for which leading classical approximations such as pure-state-based 1D (matrix product states, MPS) and 2D (isometric tensor network states, isoTNS) tensor network methods 2,3 break down. These experiments demonstrate a foundational tool for the realization of near-term quantum applications 4,5 .
Abstract The pursuit of practical quantum utility on near-term quantum processors is critically challenged by their inherent noise. Quantum error mitigation (QEM) techniques are leading solutions to improve computation fidelity with relatively low qubit-overhead, while full-scale quantum error correction remains a distant goal. However, QEM techniques incur substantial measurement overheads, especially when applied to families of quantum circuits parameterized by classical inputs. Focusing on zero-noise extrapolation (ZNE), a widely adopted QEM technique, here we devise the surrogate-enabled ZNE (S-ZNE), which leverages classical learning surrogates to perform ZNE entirely on the classical side. Unlike conventional ZNE, whose measurement cost scales linearly with the number of circuits, S-ZNE requires only constant measurement overhead for an entire family of quantum circuits, offering superior scalability. Theoretical analysis indicates that S-ZNE achieves accuracy comparable to conventional ZNE in many practical scenarios, and numerical experiments on up to 100-qubit ground-state energy and quantum metrology tasks confirm its effectiveness. Our approach provides a template that can be effectively extended to other quantum error mitigation protocols, opening a promising path toward scalable error mitigation.
Classical simulation of quantum systems is indispensable for validating quantum algorithms, benchmarking near-term quantum hardware, and understanding quantum advantage boundaries. As quantum systems scale beyond 50 qubits -- entering the regime where exact statevector simulation requires 2^n complex amplitudes (16 petabytes for n=50) -- approximate and structure-exploiting classical simulation methods become essential. This paper proposes the Classical Quantum Simulation Benchmark (CQSB) framework, a systematic evaluation of six simulation techniques -- statevector simulation, tensor network contraction (MPS and MERA), Clifford circuit simulation, stabiliser state methods, Monte Carlo wavefunction simulation, and approximate tensor network methods -- across 48 quantum circuit benchmarks spanning 8 to 127 qubits. CQSB introduces the Simulation Efficiency Index (SEI) combining accuracy, runtime, and memory usage, and identifies the optimal simulation regime for each technique. Key results: MPS tensor networks achieve exact simulation to 127 qubits for circuits with bond dimension χ <= 512; Clifford simulation scales to 10,000 qubits in O(n2) time; approximate tensor network contraction produces fidelity > 0.95 for 72-qubit random circuits within 4.8 hours on a 256-GPU cluster. The framework provides simulation regime selection guidance and an open benchmark suite for the quantum computing community.