Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.24475

Improving Zero-Noise Extrapolation via Physically Bounded Models

Andriy Miranskyy, Adam Sorrenti, Jasmine Thind, Claude Gravel

quant-phcs.ETSubmitted Apr 27, 2026• Announced Apr 28, 2026• 1 citation
arXivHTMLPDF

Abstract

Zero-noise extrapolation (ZNE) mitigates errors in near-term quantum devices by extrapolating measurements obtained at amplified noise levels to estimate noise-free expectation values. In practice, commonly used extrapolation models are fitted without enforcing physical constraints, which can yield predictions outside the valid range of quantum observables. In this work, we introduce physically bounded variants of polynomial, exponential, and polynomial--exponential extrapolation models by explicitly parameterizing the zero-noise estimate and constraining it during optimization. We evaluate the approach using a large synthetic benchmark comprising 180,000 circuits and approximately 3.6 million ZNE experiments generated under realistic device noise models derived from IBM quantum backends. We also perform preliminary validation on real quantum hardware using GHZ and W-state circuits. Across the synthetic benchmark, bounded extrapolation substantially reduces unphysical predictions and improves the stability of exponential- and polynomial--exponential-family models, whereas polynomial models show little difference between bounded and unbounded variants. Hardware experiments show similar qualitative behaviour: bounded models generally avoid pathological extrapolations and often provide a more reliable balance between accuracy and usable coverage. At the same time, the results highlight practical limitations of current devices, including stronger-than-expected noise effects and variability not fully captured by simulation models. These results suggest that enforcing physical constraints during extrapolation improves the reliability of ZNE and that this approach can be incorporated into existing workflows with minimal modification.

Related papers

Folding-Free Zero-Noise Extrapolation by Layout-induced Noise Diversity

Debarthi Pal, Yogesh Simmhan

Near term quantum processors operate in a noise dominated regime, motivating error mitigation techniques that recover accurate expectation values without full fault tolerance. Zero Noise Extrapolation (ZNE) is a widely used but biased error mitigation method that lacks rigorous error bounds. Its effective application requires nontrivial technical choices, most notably the selection of noise scaling factors and extrapolation models, making ZNE sensitive to user expertise and often necessitating costly trial and error procedures. Here, we introduce Folding Free Zero Noise Extrapolation (FF-ZNE), a method that removes the need for noise factor selection by achieving effective noise amplification without circuit folding. FF-ZNE exploits isomorphic hardware layouts with distinct native noise profiles, such that executing a fixed circuit across these layouts induces controllable variations in the effective noise strength. Under a depolarizing noise model, we analytically show that the resulting extrapolation admits a fixed linear form, eliminating extrapolator choice and enabling a seamless, user independent mitigation procedure. We further propose two algorithms that identify sets of isomorphic hardware layouts on which a given circuit yields sufficiently distinct expectation values to enable reliable zero noise extrapolation. Experiments on a 133 qubit IBM Quantum device demonstrate that FF-ZNE yields mitigated expectation values with average deviations of ~6% and 4.5% for up to 50 qubit EfficientSU2 (sparse) and Hamiltonian simulation (dense) circuits, respectively. The method is thus scalable and applicable to a broad range of circuits. By eliminating noise factor and extrapolator selection, FF-ZNE transforms zero noise extrapolation from a technique requiring expert tuning into a practical, scalable, and broadly accessible error mitigation method for current quantum hardware.

quant-pharXiv:2603.13949•Mar 17, 2026•1 citation

Direct Analysis of Zero-Noise Extrapolation: Polynomial Methods, Error Bounds, and Simultaneous Physical-Algorithmic Error Mitigation

Pegah Mohammadipour, Xiantao Li

Zero-noise extrapolation (ZNE) is a widely used quantum error mitigation technique that artificially amplifies circuit noise and then extrapolates the results to the noise-free circuit. A common ZNE approach is Richardson extrapolation, which relies on polynomial interpolation. Despite its simplicity, efficient implementations of Richardson extrapolation face several challenges, including approximation errors from the non-polynomial behavior of noise channels, overfitting due to polynomial interpolation, and exponentially amplified measurement noise. This paper provides a comprehensive analysis of these challenges, presenting bias and variance bounds that quantify approximation errors. Additionally, for any precision ε , our results offer an estimate of the necessary sample complexity. We further extend the analysis to polynomial least squares-based extrapolation, which mitigates measurement noise and avoids overfitting. Finally, we propose a strategy for simultaneously mitigating circuit and algorithmic errors in the Trotter-Suzuki algorithm by jointly scaling the time step size and the noise level. This strategy provides a practical tool to enhance the reliability of near-term quantum computations. We support our theoretical findings with numerical experiments.

arXiv:2502.20673•Quantum•Nov 14, 2025•15 citations

Comparing Zero-Noise Extrapolation Models on a 6-Qubit Grover's Algorithm

Prajwal Avadhani

Quantum computers have the potential to address computational problems beyond the practical capabilities of classical systems, but Noisy Intermediate-Scale Quantum (NISQ) processors remain limited by errors that accumulate during circuit execution. Quantum Error Mitigation (QEM), particularly Zero-Noise Extrapolation (ZNE), offers a way to reduce these errors without requiring additional physical qubits. However, ZNE has been studied extensively in relatively small or shallow circuits, leaving its effectiveness in deep, non-variational algorithms less explored. This project investigates whether combining readout mitigation and ZNE can mitigate errors in a deep, six-qubit Grover's search algorithm. The circuit was compiled onto IBM's 133-qubit FakeTorino simulated backend, reaching a depth of 1,118 and containing 369 entangling gates. Under simulated noise, the unmitigated probability of measuring the target state was 3.36%, compared with a uniform random-guessing probability of 1.5625%. Digital unitary gate folding and readout error mitigation were subsequently applied across four progressively increased noise-scaling sets (S1–S4), and scale factors. Four extrapolation models (Linear, Quadratic, Poly-Exponential, and Padé) were evaluated. The Poly-Exponential model achieved the highest average target-state probability, reaching 6.91% at S4, approximately 2.06 times the unmitigated probability. These results demonstrate that combining readout mitigation with ZNE can partially recover computational signals in deep quantum circuits under simulated hardware noise, suggesting the potential combined error mitigation techniques for improving the reliability of near-term quantum algorithms without active quantum error correction.

•Nov 13, 2026•0 citations

Benchmarking Error Mitigation: Artefactual Improvements in Zero-Noise Extrapolation

Dominik Köster, Wolfgang Mauerer

Reliable benchmarking of Quantum Error Mitigation (QEM) requires distinguishing genuine improvements from artefacts of the post-processing arithmetic. In this paper, we expose a failure mode in Richardson Zero-Noise Extrapolation (ZNE), a widely used technique routinely (and often implicitly) relied upon in benchmarks and experiments. When noise amplification operates beyond usable signals - a regime that is quickly reached on current hardware for non-trivial circuits - we show that the extrapolation no longer reflects the underlying physics, but collapses into a fixed rescaling of a single noisy measurement, producing a bogus apparent improvement that is independent of noise amplification. This poses a rarely considered threat to the validity of many empirical evaluations in quantum computing. Measurements on real hardware (IQM Euro-Q-Exa) confirm this collapse with ordinary folding alone: as circuit depth erodes the signal, the reported estimate decouples from the truth and overshoots the ideal by up to 21%. We further introduce a matched-cost "garbage-folding" negative control that carries no usable signal yet reports a larger apparent improvement than genuine folding - showing that the magnitude of an improvement is not evidence of its correctness - alongside a zero-cost check flagging the artefact from data a benchmark already holds. We distil both into a short reporting checklist for ZNE benchmarks.

quant-pharXiv:2607.09360•Jul 13, 2026•2 citations

Improved Low-Cost Quantum Error Mitigation with Benchmarked-Noise Zero-Noise Extrapolation (bnZNE)

Joseph Harris, Kevin Lively, Peter Ken Schuhmacher

We theoretically extend and experimentally demonstrate benchmarked-noise zero-noise extrapolation (bnZNE), a simple and low-cost method for quantum error mitigation which aims to outperform the highly popular ZNE method for an equal total shot cost by improving the classical extrapolation step. We recently proposed bnZNE as a new error mitigation method (Harris et al., arXiv:2603.10224 (2026)) and showed that it can mitigate noise to the same order as standard ZNE under gate-wise depolarizing noise. Here, we introduce randomized bnZNE which addresses the case of running multiple random circuits per noise level, allowing for the incorporation of noise-tailoring techniques like Pauli twirling and readout error mitigation, and test the method on the IBM and IQM hardware for a plethora of large-scale applications, observing bnZNE to consistently produce more accurate results than standard ZNE. Our approach enhances the extrapolation process to the zero-noise limit by using classically-simulable and structure-mirroring benchmark circuits, generated from the standard application circuit, to sensitively measure the effective error rate at each scaled noise level beyond simple integer values. We give a new method for generating tailored benchmark circuits for the IQM superconducting devices and test them experimentally. Our results demonstrate that bnZNE presents a versatile alternative to ZNE which can enable more accurate results at utility scales with an equivalent cost.

arXiv:2611.16971•Nov 12, 2026•0 citations

A Novel Approach for Mitigating Gate- Level Noise in IBM Quantum Hardware via Zero Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC) Techniques

Mohammed Suhaib, V. Karthick, D. Maria Monica

Abstract The practical application of Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally limited by gate-level noise, which corrupts computational results. This research addresses this challenge through the development and validation of a modular software framework for Quantum Error Mitigation (QEM). We implement and compare two leading QEM strategies: Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC). The framework is built using the Qiskit library and is validated using a realistic, hardware-calibrated noisy simulator that mimics the error characteristics of a real IBM Quantum device. Our methodology focuses on a robust implementation of ZNE via unitary folding and a proof-of-concept demonstration of the PEC algorithm. The framework's effectiveness is demonstrated on a simulated noisy backend where, for a 3-qubit Greenberger-Horne-Zeilinger (GHZ) state, the baseline state fidelity was increased from 93.5% to 97.3% via ZNE, corresponding to a 59% reduction in the state's infidelity. This work provides a practical demonstration of how software-based error mitigation can enhance the reliability of quantum computations on current noisy hardware.

•Dec 8, 2025•2 citations
Zero-noise extrapolation (ZNE) mitigates errors in near-term quantum devices by extrapolating measurements obtained at amplified noise levels to estimate noise-free expectation values. In practice, commonly used extrapolation models are fitted without enforcing physical constraints, which can yield predictions outside the valid range of quantum observables.
In this work, we introduce physically bounded variants of polynomial, exponential, and polynomial--exponential extrapolation models by explicitly parameterizing the zero-noise estimate and constraining it during optimization. We evaluate the approach using a large synthetic benchmark comprising 180,000 circuits and approximately 3.6 million ZNE experiments generated under realistic device noise models derived from IBM quantum backends. We also perform preliminary validation on real quantum hardware using GHZ and W-state circuits.
Across the synthetic benchmark, bounded extrapolation substantially reduces unphysical predictions and improves the stability of exponential- and polynomial--exponential-family models, whereas polynomial models show little difference between bounded and unbounded variants. Hardware experiments show similar qualitative behaviour: bounded models generally avoid pathological extrapolations and often provide a more reliable balance between accuracy and usable coverage. At the same time, the results highlight practical limitations of current devices, including stronger-than-expected noise effects and variability not fully captured by simulation models. These results suggest that enforcing physical constraints during extrapolation improves the reliability of ZNE and that this approach can be incorporated into existing workflows with minimal modification.
Near term quantum processors operate in a noise dominated regime, motivating error mitigation techniques that recover accurate expectation values without full fault tolerance. Zero Noise Extrapolation (ZNE) is a widely used but biased error mitigation method that lacks rigorous error bounds. Its effective application requires nontrivial technical choices, most notably the selection of noise scaling factors and extrapolation models, making ZNE sensitive to user expertise and often necessitating costly trial and error procedures. Here, we introduce Folding Free Zero Noise Extrapolation (FF-ZNE), a method that removes the need for noise factor selection by achieving effective noise amplification without circuit folding. FF-ZNE exploits isomorphic hardware layouts with distinct native noise profiles, such that executing a fixed circuit across these layouts induces controllable variations in the effective noise strength. Under a depolarizing noise model, we analytically show that the resulting extrapolation admits a fixed linear form, eliminating extrapolator choice and enabling a seamless, user independent mitigation procedure. We further propose two algorithms that identify sets of isomorphic hardware layouts on which a given circuit yields sufficiently distinct expectation values to enable reliable zero noise extrapolation. Experiments on a 133 qubit IBM Quantum device demonstrate that FF-ZNE yields mitigated expectation values with average deviations of ~6% and 4.5% for up to 50 qubit EfficientSU2 (sparse) and Hamiltonian simulation (dense) circuits, respectively. The method is thus scalable and applicable to a broad range of circuits. By eliminating noise factor and extrapolator selection, FF-ZNE transforms zero noise extrapolation from a technique requiring expert tuning into a practical, scalable, and broadly accessible error mitigation method for current quantum hardware.
Zero-noise extrapolation (ZNE) is a widely used quantum error mitigation technique that artificially amplifies circuit noise and then extrapolates the results to the noise-free circuit. A common ZNE approach is Richardson extrapolation, which relies on polynomial interpolation. Despite its simplicity, efficient implementations of Richardson extrapolation face several challenges, including approximation errors from the non-polynomial behavior of noise channels, overfitting due to polynomial interpolation, and exponentially amplified measurement noise. This paper provides a comprehensive analysis of these challenges, presenting bias and variance bounds that quantify approximation errors. Additionally, for any precision ε , our results offer an estimate of the necessary sample complexity. We further extend the analysis to polynomial least squares-based extrapolation, which mitigates measurement noise and avoids overfitting. Finally, we propose a strategy for simultaneously mitigating circuit and algorithmic errors in the Trotter-Suzuki algorithm by jointly scaling the time step size and the noise level. This strategy provides a practical tool to enhance the reliability of near-term quantum computations. We support our theoretical findings with numerical experiments.
Quantum computers have the potential to address computational problems beyond the practical capabilities of classical systems, but Noisy Intermediate-Scale Quantum (NISQ) processors remain limited by errors that accumulate during circuit execution. Quantum Error Mitigation (QEM), particularly Zero-Noise Extrapolation (ZNE), offers a way to reduce these errors without requiring additional physical qubits. However, ZNE has been studied extensively in relatively small or shallow circuits, leaving its effectiveness in deep, non-variational algorithms less explored. This project investigates whether combining readout mitigation and ZNE can mitigate errors in a deep, six-qubit Grover's search algorithm. The circuit was compiled onto IBM's 133-qubit FakeTorino simulated backend, reaching a depth of 1,118 and containing 369 entangling gates. Under simulated noise, the unmitigated probability of measuring the target state was 3.36%, compared with a uniform random-guessing probability of 1.5625%. Digital unitary gate folding and readout error mitigation were subsequently applied across four progressively increased noise-scaling sets (S1–S4), and scale factors. Four extrapolation models (Linear, Quadratic, Poly-Exponential, and Padé) were evaluated. The Poly-Exponential model achieved the highest average target-state probability, reaching 6.91% at S4, approximately 2.06 times the unmitigated probability. These results demonstrate that combining readout mitigation with ZNE can partially recover computational signals in deep quantum circuits under simulated hardware noise, suggesting the potential combined error mitigation techniques for improving the reliability of near-term quantum algorithms without active quantum error correction.
Reliable benchmarking of Quantum Error Mitigation (QEM) requires distinguishing genuine improvements from artefacts of the post-processing arithmetic. In this paper, we expose a failure mode in Richardson Zero-Noise Extrapolation (ZNE), a widely used technique routinely (and often implicitly) relied upon in benchmarks and experiments. When noise amplification operates beyond usable signals - a regime that is quickly reached on current hardware for non-trivial circuits - we show that the extrapolation no longer reflects the underlying physics, but collapses into a fixed rescaling of a single noisy measurement, producing a bogus apparent improvement that is independent of noise amplification. This poses a rarely considered threat to the validity of many empirical evaluations in quantum computing. Measurements on real hardware (IQM Euro-Q-Exa) confirm this collapse with ordinary folding alone: as circuit depth erodes the signal, the reported estimate decouples from the truth and overshoots the ideal by up to 21%. We further introduce a matched-cost "garbage-folding" negative control that carries no usable signal yet reports a larger apparent improvement than genuine folding - showing that the magnitude of an improvement is not evidence of its correctness - alongside a zero-cost check flagging the artefact from data a benchmark already holds. We distil both into a short reporting checklist for ZNE benchmarks.
We theoretically extend and experimentally demonstrate benchmarked-noise zero-noise extrapolation (bnZNE), a simple and low-cost method for quantum error mitigation which aims to outperform the highly popular ZNE method for an equal total shot cost by improving the classical extrapolation step. We recently proposed bnZNE as a new error mitigation method (Harris et al., arXiv:2603.10224 (2026)) and showed that it can mitigate noise to the same order as standard ZNE under gate-wise depolarizing noise. Here, we introduce randomized bnZNE which addresses the case of running multiple random circuits per noise level, allowing for the incorporation of noise-tailoring techniques like Pauli twirling and readout error mitigation, and test the method on the IBM and IQM hardware for a plethora of large-scale applications, observing bnZNE to consistently produce more accurate results than standard ZNE. Our approach enhances the extrapolation process to the zero-noise limit by using classically-simulable and structure-mirroring benchmark circuits, generated from the standard application circuit, to sensitively measure the effective error rate at each scaled noise level beyond simple integer values. We give a new method for generating tailored benchmark circuits for the IQM superconducting devices and test them experimentally. Our results demonstrate that bnZNE presents a versatile alternative to ZNE which can enable more accurate results at utility scales with an equivalent cost.
Abstract The practical application of Noisy Intermediate-Scale Quantum (NISQ) hardware is fundamentally limited by gate-level noise, which corrupts computational results. This research addresses this challenge through the development and validation of a modular software framework for Quantum Error Mitigation (QEM). We implement and compare two leading QEM strategies: Zero-Noise Extrapolation (ZNE) and Probabilistic Error Cancellation (PEC). The framework is built using the Qiskit library and is validated using a realistic, hardware-calibrated noisy simulator that mimics the error characteristics of a real IBM Quantum device. Our methodology focuses on a robust implementation of ZNE via unitary folding and a proof-of-concept demonstration of the PEC algorithm. The framework's effectiveness is demonstrated on a simulated noisy backend where, for a 3-qubit Greenberger-Horne-Zeilinger (GHZ) state, the baseline state fidelity was increased from 93.5% to 97.3% via ZNE, corresponding to a 59% reduction in the state's infidelity. This work provides a practical demonstration of how software-based error mitigation can enhance the reliability of quantum computations on current noisy hardware.