Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2306.15215 · Applied Physics Letters

Distant RF field sensing with a passive Rydberg-atomic transducer

J. Susanne Otto, Matthew Chilcott, Amita B. Deb, Niels Kjærgaard

Published Oct 2, 2023• 18 citations
arXivHTMLPDF

Abstract

We combine a rubidium vapor cell with a corner-cube prism reflector to form a passive RF transducer, allowing the detection of microwave signals at a location distant from the active components required for atomic sensing. This compact transducer has no electrical components and is optically linked to an active base station by a pair of free-space laser beams that establish an electromagnetically induced transparency scenario. Microwave signals at the transducer location are imprinted onto an optical signal which is detected at the base station. Our sensing architecture with a remote standalone transducer unit adds important flexibility to Rydberg-atom based sensing technologies, which are currently subject to significant attention. We demonstrate a ∼30 m link with no particular effort and foresee significant future prospects of achieving a much larger separation between the transducer and the base station.

DOI
10.1063/5.0169993

Related papers

Radio-over-fiber using an optical antenna based on Rydberg states of atoms

Amita B. Deb, Niels Kjærgaard

We provide an experimental demonstration of a direct fiber-optic link for RF transmission (“radio-over-fiber”) using a sensitive optical antenna based on a rubidium vapor cell. The scheme relies on measuring the transmission of laser light at an electromagnetically induced transparency resonance that involves highly excited Rydberg states. By dressing pairs of Rydberg states using microwave fields that act as local oscillators, we encoded RF signals in the optical frequency domain. The light carrying the information is linked via a virtually lossless optical fiber to a photodetector where the signal is retrieved. We demonstrate a signal bandwidth in excess of 1 MHz limited by the available coupling laser power and atomic optical density. Our sensitive, non-metallic and readily scalable optical antenna for microwaves allows extremely low-levels of optical power (∼1 μW) throughput in the fiber-optic link. It offers a promising future platform for emerging wireless network infrastructures.

arXiv:1803.09424•Applied Physics Letters•May 21, 2018•101 citations

Rydberg Atom RF Sensing: State of the Art, Principles, Metrics, and Roadmaps

Anu Babusenan, Fr´ed´eric Munoz, Jean-Baptiste Qu´elene +1 more

Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.

IEEE Sensors Reviews•Jan 1, 2026•1 citation

Probing bandwidth and sensitivity in Rydberg atom sensing via optical homodyne and rf heterodyne detection

Dixith Manchaiah, Stone Oliver, Samuel Berweger +2 more

Rydberg atom based sensors allow for SI traceable measurements and show promise for applications in the field of communication and radar technologies. In this article, we investigate the bandwidth and sensitivity of a Rydberg atom-based sensor in a rubidium vapor cell using Rydberg electromagnetically induced transparency (EIT) spectroscopy. We employ a radio-frequency (RF) heterodyne measurement technique in combination with an optical homodyne setup to extend the achievable range between sensitivity and bandwidth in a Rydberg sensor. While the bandwidth of Rydberg sensors are limited by the transit time of atoms and the Rabi frequency of the coupling field, achieving higher bandwidth through smaller beam sizes is thought to compromise sensitivity due to reduced EIT signal strength. Using optical homodyne detection, we demonstrate that sensitivity is preserved while achieving a response bandwidth of 8 MHz. In addition, using the Rydberg sensor, we receive digital communication signals and present error vector magnitude (EVM) measurements as a function of varying symbol rates and bandwidth of the Rydberg sensor. Furthermore, the sensor's performance is compared with a conventional RF mixer. We establish that the bandwidth of a Rydberg sensor when receiving a pure tone is not the same as the bandwidth of the sensor when receiving a modulated signal. This difference results from the spreading of symbols in the frequency domain, leading to a reduction of the signal to noise ratio (SNR) and an accumulation of noise over the total span of the modulated signal.

arXiv:2509.20632•Physical Review A•Dec 22, 2025•8 citations

Dispersive radio frequency electrometry using Rydberg atoms in a prism-shaped atomic vapor cell

Haoquan Fan, Santosh Kumar, Harald Kübler +1 more

Abstract We introduce a method to measure radio frequency (RF) electric fields (E-fields) using atoms contained in a prism-shaped vapor cell. The method utilizes the concept of electromagnetically induced transparency with Rydberg atoms. The RF E-field induces changes in the index of refraction of the vapor resulting in deflection of the probe laser beam as it passes through the prism-shaped vapor cell. We measured a minimum RF E-field of 8.25 μ Vcm − 1 with a sensitivity of ∼ 46.5 μ Vcm − 1 Hz − 1 / 2 . The experimental results agree with a numerical model that includes dephasing effects. We discuss possible improvements to obtain higher sensitivity for RF E-field measurements.

Journal of Physics B Atomic Molecular and Optical Physics•May 5, 2016•37 citations

Broadband Rydberg atom-based radio-frequency field sensor

Jiao Yue-Chun, Jianming Zhao, Jia Suo-Tang

Significant progress has been made in atom-based measurements of length, time, gravity and electromagnetic fields in recently years. Rydberg atom-based microwave electric field measurement, using electromagnetically induced transparency (EIT) in room temperature alkali-metal vapors, has been extensively investigated and aroused the broad interest. This approach may establish a new standard for the measurements of microwave (MW) and radio frequency (RF) electric fields.In this review, we describe the work on a new method of measuring electric fields based on quantum interference by using either cesium or rubidium atoms contained in a dielectric vapor cell. Rydberg atoms with principal quantum number n >>1 have large direct current (DC) polarizabilities and microwave transition dipole moments, thereby making them extremely sensitive to external electric fields. Using the Rydberg three-level EIT to detect the level splitting and shift that is induced by the external field, we can realize a rapid and robust self-calibration method of measuring the electric field in a frequency range from 0.01 GHz to 1000 GHz. For the MW electric field (frequency range > 1 GHz), the MW field causes the Rydberg states to split, known as an Autler-Townes splitting (A-T) effect when the applied microwave can resonate with adjacent Rydberg states. The MW coupled A-T splitting is proportional to the applied electric field strength, from which the field strength is measured. Using the EIT window, a high sensitivity of 3 μV·cm-1·Hz-1/2 and small electric field of 1 μV/cm are expected to be achieved with a modest setup, and the limitations of the sensitivity are also addressed in the review. For the RF field at frequency mj EIT lines, and avoided crossings formed with the fine-structure levels of equal mj and different J's, which is used to calibrate and measure the RF field amplitude. On the other hand, the dependence of the EIT-line strength on the RF field polarization provides a fast and robust polarization measurement of RF fields based on matching experimental data with a theoretical simulation. The measurements of minimum strengths and sensitivity of RF fields based on Rydberg atoms are one order magnitude below the values obtained by traditional antenna methods. The atom-based field measurement paves the way for determining fields through calibration-free, invariable atomic properties and miniaturization. We also propose its various potential applications in the future.

Acta Physica Sinica•Jan 1, 2018•7 citations

Quantum Assisted Sensing Using Rydberg Atoms

Jonathon A. Sedlacek, Arne Schwettmann, Harald Kübler +1 more

Electromagnetically induced transparency in a thermal vapor of Rubidium Rydberg atoms is used to sense small radio frequency (RF) electric fields. The smallest detected field amplitude is ~ 8 µv/cm. Polarization sensitivity is also demonstrated.

Frontiers in Optics•Jan 1, 2012•0 citations
We combine a rubidium vapor cell with a corner-cube prism reflector to form a passive RF transducer, allowing the detection of microwave signals at a location distant from the active components required for atomic sensing. This compact transducer has no electrical components and is optically linked to an active base station by a pair of free-space laser beams that establish an electromagnetically induced transparency scenario. Microwave signals at the transducer location are imprinted onto an optical signal which is detected at the base station. Our sensing architecture with a remote standalone transducer unit adds important flexibility to Rydberg-atom based sensing technologies, which are currently subject to significant attention. We demonstrate a ∼30 m link with no particular effort and foresee significant future prospects of achieving a much larger separation between the transducer and the base station.
We provide an experimental demonstration of a direct fiber-optic link for RF transmission (“radio-over-fiber”) using a sensitive optical antenna based on a rubidium vapor cell. The scheme relies on measuring the transmission of laser light at an electromagnetically induced transparency resonance that involves highly excited Rydberg states. By dressing pairs of Rydberg states using microwave fields that act as local oscillators, we encoded RF signals in the optical frequency domain. The light carrying the information is linked via a virtually lossless optical fiber to a photodetector where the signal is retrieved. We demonstrate a signal bandwidth in excess of 1 MHz limited by the available coupling laser power and atomic optical density. Our sensitive, non-metallic and readily scalable optical antenna for microwaves allows extremely low-levels of optical power (∼1 μW) throughput in the fiber-optic link. It offers a promising future platform for emerging wireless network infrastructures.
Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.
Rydberg atom based sensors allow for SI traceable measurements and show promise for applications in the field of communication and radar technologies. In this article, we investigate the bandwidth and sensitivity of a Rydberg atom-based sensor in a rubidium vapor cell using Rydberg electromagnetically induced transparency (EIT) spectroscopy. We employ a radio-frequency (RF) heterodyne measurement technique in combination with an optical homodyne setup to extend the achievable range between sensitivity and bandwidth in a Rydberg sensor. While the bandwidth of Rydberg sensors are limited by the transit time of atoms and the Rabi frequency of the coupling field, achieving higher bandwidth through smaller beam sizes is thought to compromise sensitivity due to reduced EIT signal strength. Using optical homodyne detection, we demonstrate that sensitivity is preserved while achieving a response bandwidth of 8 MHz. In addition, using the Rydberg sensor, we receive digital communication signals and present error vector magnitude (EVM) measurements as a function of varying symbol rates and bandwidth of the Rydberg sensor. Furthermore, the sensor's performance is compared with a conventional RF mixer. We establish that the bandwidth of a Rydberg sensor when receiving a pure tone is not the same as the bandwidth of the sensor when receiving a modulated signal. This difference results from the spreading of symbols in the frequency domain, leading to a reduction of the signal to noise ratio (SNR) and an accumulation of noise over the total span of the modulated signal.
Abstract We introduce a method to measure radio frequency (RF) electric fields (E-fields) using atoms contained in a prism-shaped vapor cell. The method utilizes the concept of electromagnetically induced transparency with Rydberg atoms. The RF E-field induces changes in the index of refraction of the vapor resulting in deflection of the probe laser beam as it passes through the prism-shaped vapor cell. We measured a minimum RF E-field of 8.25 μ Vcm − 1 with a sensitivity of ∼ 46.5 μ Vcm − 1 Hz − 1 / 2 . The experimental results agree with a numerical model that includes dephasing effects. We discuss possible improvements to obtain higher sensitivity for RF E-field measurements.
Significant progress has been made in atom-based measurements of length, time, gravity and electromagnetic fields in recently years. Rydberg atom-based microwave electric field measurement, using electromagnetically induced transparency (EIT) in room temperature alkali-metal vapors, has been extensively investigated and aroused the broad interest. This approach may establish a new standard for the measurements of microwave (MW) and radio frequency (RF) electric fields.In this review, we describe the work on a new method of measuring electric fields based on quantum interference by using either cesium or rubidium atoms contained in a dielectric vapor cell. Rydberg atoms with principal quantum number n >>1 have large direct current (DC) polarizabilities and microwave transition dipole moments, thereby making them extremely sensitive to external electric fields. Using the Rydberg three-level EIT to detect the level splitting and shift that is induced by the external field, we can realize a rapid and robust self-calibration method of measuring the electric field in a frequency range from 0.01 GHz to 1000 GHz. For the MW electric field (frequency range > 1 GHz), the MW field causes the Rydberg states to split, known as an Autler-Townes splitting (A-T) effect when the applied microwave can resonate with adjacent Rydberg states. The MW coupled A-T splitting is proportional to the applied electric field strength, from which the field strength is measured. Using the EIT window, a high sensitivity of 3 μV·cm-1·Hz-1/2 and small electric field of 1 μV/cm are expected to be achieved with a modest setup, and the limitations of the sensitivity are also addressed in the review. For the RF field at frequency mj EIT lines, and avoided crossings formed with the fine-structure levels of equal mj and different J's, which is used to calibrate and measure the RF field amplitude. On the other hand, the dependence of the EIT-line strength on the RF field polarization provides a fast and robust polarization measurement of RF fields based on matching experimental data with a theoretical simulation. The measurements of minimum strengths and sensitivity of RF fields based on Rydberg atoms are one order magnitude below the values obtained by traditional antenna methods. The atom-based field measurement paves the way for determining fields through calibration-free, invariable atomic properties and miniaturization. We also propose its various potential applications in the future.