Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2305.05555 · Applied Physics Letters

Atomic gravimeter robust to environmental effects

Cristian Daniel Panda, Matt Tao, Miguel Ceja, Andrew Reynoso, Holger Müller

Published Aug 7, 2023• 15 citations
arXivHTMLPDF

Abstract

Atomic accelerometers and gravimeters are usually based on freely falling atoms in atomic fountains, which not only limits their size but also their robustness to environmental factors, such as tilts, magnetic fields, and vibrations. Such limitations have precluded their broad adoption in the field, for geophysics, geology, and inertial navigation. More recently, atom interferometers based on holding atoms in an optical lattice have been developed. Such gravimeters also suppress the influence of vibrations in the frequency range of ∼1 Hz and above by several orders of magnitude relative to conventional atomic gravimeters. Here, we show that such interferometers are robust to tilts of more than 8 mrad with respect to the vertical and can suppress the effect of even strong environmental magnetic fields and field gradients by using atoms in the F=3, 4 hyperfine ground states as co-magnetometers, potentially eliminating the need for shielding. We demonstrate gravimeter sensitivity of 0.7 mGal/Hz (1 mGal = 10 μm/s2) in a compact geometry where atoms only travel over millimeters of space.

DOI
10.1063/5.0163101

Related papers

Probing gravity with trapped atoms: the optical lattice atom interferometer

Cristian Daniel Panda

Atom interferometers are quantum mechanical devices sensitive to gravitational and inertial forces, with applications in fundamental physics and inertial sensing in the field. Their performance is currently limited by the interrogation time available to freely falling atoms in Earth’s gravitational field, as well as noise due to mechanical and acoustic vibrations. Our experiment probes gravitational potentials by holding, rather than dropping, atoms. We realize an interrogation time of 20 seconds by suspending the spatially separated atomic wave packets in an optical lattice. This record coherence is enabled by the smooth lattice wave fronts, which are mode-filtered by an optical cavity. This trapped geometry suppresses phase variance due to vibrations by three to four orders of magnitude, overcoming the dominant noise source in atom-interferometric gravimeters. The later part of the talk describes recent progress in characterizing and reducing dephasing of the interferometer. An upgraded optical lattice interferometer experiment is currently being commissioned, with the goal of increased sensitivity to gravity.

Optical and Quantum Sensing and Precision Metrology•Mar 4, 2021•0 citations

A portable atom gravimeter operating in noisy urban environments

Bin Chen, Jinbao Long, Hong-Tai Xie +4 more

The gravimeter based on atom interferometry has potentially wide applications on building the gravity networks, geophysics as well as gravity assisted navigation. Here, we demonstrate experimentally a portable atom gravimeter operating in the noisy urban environment. Despite the influence of noisy external vibrations, our portable atom gravimeter reaches a sensitivity as good as 65 uGal/\sqrt{Hz} and a resolution of 1.1 uGal after 4000 s integration time, being comparable to state-of-the-art atom gravimeters. Our achievement paves the way for bring the portable atom gravimeter to field applications, such as gravity survey on a moving platform.

arXiv:2203.10696•Mar 21, 2022•0 citations

An atom interferometer for measuring horizontal accelerations

Jimmy Stammers

Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.

•Nov 1, 2018•6 citations

High-Sensitivity Absolute Atomic Gravimeter

Christine Guerlin, Tristan Farah, Anne Louchet-Chauvet +2 more

Cold atom free-fall interferometers now realize state-of-the-art precision inertial sensors, opening perspectives towards embedded devices for applications and fundamental physics tests on earth and in space. The acceleration of gravity can be measured in a stimulated Raman transition interferometer where the acceleration under gravity of a cloud of freely falling atoms is sensed by three Raman pulses allowing to split, reflect and interfere atomic wave packets [1]. The gravimeter developped at SYRTE allows to measure the acceleration of gravity at state-of-the-art performances compared to the best classical absolute gravimeters, with a sensitivity of 2×10−8g over 1s and an exactitude of 5×10−9 g [2]. This exactitude is currently limited by wavefront aberrations of the lasers, sampled by residual transverse trajectories of the molasse-cooled cloud over the free fall. Unbalanced transverse trajectories will also bias the measurement due to Coriolis effect [3]. We will investigate the use of a colder atom source to reduce these systematic effects, by implementing Bose-Einstein condensation of the initial cloud, allowing both better position control and better focusing of our source.

Research in Optical Sciences•Jan 1, 2012•0 citations

Compact differential gravimeter at the quantum projection-noise limit

Camille Janvier, Vincent Ménoret, Bruno Desruelle +3 more

Atom interferometry offers new perspectives for geophysics and inertial sensing. We present the industrial prototype of a quantum-based instrument: a compact, transportable, differential quantum gravimeter capable of measuring simultaneously the absolute values of both gravitational acceleration $g$ and its vertical gradient ${\mathrm{\ensuremath{\Gamma}}}_{zz}$. While the sensitivity to $g$ is competitive with the best industrial gravimeters, the sensitivity on ${\mathrm{\ensuremath{\Gamma}}}_{zz}$ reaches the limit set by quantum projection noise---leading to a long-term stability of $0.1\phantom{\rule{0.28em}{0ex}}\mathrm{E}$ ($1\phantom{\rule{0.28em}{0ex}}\mathrm{E}=1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}\phantom{\rule{0.28em}{0ex}}{\mathrm{s}}^{\ensuremath{-}2}$). This dual-purpose instrument constitutes the industrial integration of cold atom sensors for practical applications. It paves the way for different applications in geophysics, civil engineering, and gravity-aided navigation, where accurate mapping of the gravitational field plays an important role.

arXiv:2201.03345•Physical Review A•Feb 7, 2022•105 citations

Inertial noise post-correction in atom interferometers measuring the local gravitational acceleration

L. Richardson

Exploiting the quantum nature of atoms through the use of matter-wave interferometry has lead to the development of devices sensitive to, among other things, the local gravitational acceleration. Measurements of the gravitational acceleration have applications ranging from detection of subterranean density di erences to observation of general relativistic e ects. Light-pulse atom interferometers provide an absolute measurement of the gravitational acceleration with a sensitivity competitive and even surpassing the performance of classical sensors. The advantages of atom interferometers as inertial measurement devices have lead to e orts in increasing sensitivity and decreasing the physical dimensions of the measurement head, allowing them to be more transportable for eld use applications. With increasing sensitivity, it becomes more critical to address the noise source limitations a ecting the measurement, speci cally the in uence of ground motion on measurements. Vibrations coupling into the inertial reference add a time varying phase shift uncommon to the paths of the interferometer. This limitation is especially pertinent to transportable atom gravimeters measuring in the eld where inertial noise is typically far higher than in relatively quiet laboratory environments. Within this work, implementation and demonstration of inertial noise post-correction in an atom interferometer is shown within low inertial noise environments and simulated strong motion environments. For a high pulse separation time atom interferometer (T = 78 ms) post-correction yielded an increase in the short term stability from 4.4 x 10 ̄6 m/s2/√Hz to 9.2 x 10 ̄7 m/s2/√Hz. This method was reproduced with a di erent motion sensor to perform post-correction in a high motion environment, generated by introducing additional movement onto the inertial reference. By performing post-correction in the high motion environment, we were able to show an increase of short term stability of γ = 73.8. Current limitations to the post-correction resulted from self noise resolution limitations and spectral resolutions limitations. Beyond corrections with commercially available sensors, this work demonstrates the rst post-correction with a next generation compact optomechanical sensor. This optomechanical sensor is formed from monolithic fused silica capable of sensitively measuring accelerations of a harmonic oscillator test mass, which can be read-out optically. This novel motion sensor has the advantage to any previously shown sensor used for post-correction in the capacity that it is vacuum compatible, insensitive to magnetic elds and has the potential to be implemented directly into the inertial reference. In this work, inertial noise post-correction in a simulated high motion environment is shown, correcting from a short term stability of 8 x 10 ̄3 m/s2/√Hz to 5 x 10 ̄4 m/s2/√Hz. Post-correction was limited by the parasitic cavities within the ber required for optical read-out of the harmonic oscillator displacement and intensity noise uctuations of the source laser. The results shown within this work are congruent with previous works on atom chip gravimeters, both of which help move towards portable hand-held gravimeter measurement heads capable of sensitive inertial measurement.

•Jan 1, 2019•10 citations
Atomic accelerometers and gravimeters are usually based on freely falling atoms in atomic fountains, which not only limits their size but also their robustness to environmental factors, such as tilts, magnetic fields, and vibrations. Such limitations have precluded their broad adoption in the field, for geophysics, geology, and inertial navigation. More recently, atom interferometers based on holding atoms in an optical lattice have been developed. Such gravimeters also suppress the influence of vibrations in the frequency range of ∼1 Hz and above by several orders of magnitude relative to conventional atomic gravimeters. Here, we show that such interferometers are robust to tilts of more than 8 mrad with respect to the vertical and can suppress the effect of even strong environmental magnetic fields and field gradients by using atoms in the F=3, 4 hyperfine ground states as co-magnetometers, potentially eliminating the need for shielding. We demonstrate gravimeter sensitivity of 0.7 mGal/Hz (1 mGal = 10 μm/s2) in a compact geometry where atoms only travel over millimeters of space.
Atom interferometers are quantum mechanical devices sensitive to gravitational and inertial forces, with applications in fundamental physics and inertial sensing in the field. Their performance is currently limited by the interrogation time available to freely falling atoms in Earth’s gravitational field, as well as noise due to mechanical and acoustic vibrations. Our experiment probes gravitational potentials by holding, rather than dropping, atoms. We realize an interrogation time of 20 seconds by suspending the spatially separated atomic wave packets in an optical lattice. This record coherence is enabled by the smooth lattice wave fronts, which are mode-filtered by an optical cavity. This trapped geometry suppresses phase variance due to vibrations by three to four orders of magnitude, overcoming the dominant noise source in atom-interferometric gravimeters. The later part of the talk describes recent progress in characterizing and reducing dephasing of the interferometer. An upgraded optical lattice interferometer experiment is currently being commissioned, with the goal of increased sensitivity to gravity.
The gravimeter based on atom interferometry has potentially wide applications on building the gravity networks, geophysics as well as gravity assisted navigation. Here, we demonstrate experimentally a portable atom gravimeter operating in the noisy urban environment. Despite the influence of noisy external vibrations, our portable atom gravimeter reaches a sensitivity as good as 65 uGal/\sqrt{Hz} and a resolution of 1.1 uGal after 4000 s integration time, being comparable to state-of-the-art atom gravimeters. Our achievement paves the way for bring the portable atom gravimeter to field applications, such as gravity survey on a moving platform.
Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.
Cold atom free-fall interferometers now realize state-of-the-art precision inertial sensors, opening perspectives towards embedded devices for applications and fundamental physics tests on earth and in space. The acceleration of gravity can be measured in a stimulated Raman transition interferometer where the acceleration under gravity of a cloud of freely falling atoms is sensed by three Raman pulses allowing to split, reflect and interfere atomic wave packets [1]. The gravimeter developped at SYRTE allows to measure the acceleration of gravity at state-of-the-art performances compared to the best classical absolute gravimeters, with a sensitivity of 2×10−8g over 1s and an exactitude of 5×10−9 g [2]. This exactitude is currently limited by wavefront aberrations of the lasers, sampled by residual transverse trajectories of the molasse-cooled cloud over the free fall. Unbalanced transverse trajectories will also bias the measurement due to Coriolis effect [3]. We will investigate the use of a colder atom source to reduce these systematic effects, by implementing Bose-Einstein condensation of the initial cloud, allowing both better position control and better focusing of our source.
Atom interferometry offers new perspectives for geophysics and inertial sensing. We present the industrial prototype of a quantum-based instrument: a compact, transportable, differential quantum gravimeter capable of measuring simultaneously the absolute values of both gravitational acceleration ggg and its vertical gradient ${\mathrm{\ensuremath{\Gamma}}}_{zz}$. While the sensitivity to ggg is competitive with the best industrial gravimeters, the sensitivity on ${\mathrm{\ensuremath{\Gamma}}}_{zz}$ reaches the limit set by quantum projection noise---leading to a long-term stability of 0.1E0.1\phantom{\rule{0.28em}{0ex}}\mathrm{E}0.1E ($1\phantom{\rule{0.28em}{0ex}}\mathrm{E}=1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}9}\phantom{\rule{0.28em}{0ex}}{\mathrm{s}}^{\ensuremath{-}2}$). This dual-purpose instrument constitutes the industrial integration of cold atom sensors for practical applications. It paves the way for different applications in geophysics, civil engineering, and gravity-aided navigation, where accurate mapping of the gravitational field plays an important role.
Exploiting the quantum nature of atoms through the use of matter-wave interferometry has lead to the development of devices sensitive to, among other things, the local gravitational acceleration. Measurements of the gravitational acceleration have applications ranging from detection of subterranean density di erences to observation of general relativistic e ects. Light-pulse atom interferometers provide an absolute measurement of the gravitational acceleration with a sensitivity competitive and even surpassing the performance of classical sensors. The advantages of atom interferometers as inertial measurement devices have lead to e orts in increasing sensitivity and decreasing the physical dimensions of the measurement head, allowing them to be more transportable for eld use applications. With increasing sensitivity, it becomes more critical to address the noise source limitations a ecting the measurement, speci cally the in uence of ground motion on measurements. Vibrations coupling into the inertial reference add a time varying phase shift uncommon to the paths of the interferometer. This limitation is especially pertinent to transportable atom gravimeters measuring in the eld where inertial noise is typically far higher than in relatively quiet laboratory environments. Within this work, implementation and demonstration of inertial noise post-correction in an atom interferometer is shown within low inertial noise environments and simulated strong motion environments. For a high pulse separation time atom interferometer (T = 78 ms) post-correction yielded an increase in the short term stability from 4.4 x 10 ̄6 m/s2/√Hz to 9.2 x 10 ̄7 m/s2/√Hz. This method was reproduced with a di erent motion sensor to perform post-correction in a high motion environment, generated by introducing additional movement onto the inertial reference. By performing post-correction in the high motion environment, we were able to show an increase of short term stability of γ = 73.8. Current limitations to the post-correction resulted from self noise resolution limitations and spectral resolutions limitations. Beyond corrections with commercially available sensors, this work demonstrates the rst post-correction with a next generation compact optomechanical sensor. This optomechanical sensor is formed from monolithic fused silica capable of sensitively measuring accelerations of a harmonic oscillator test mass, which can be read-out optically. This novel motion sensor has the advantage to any previously shown sensor used for post-correction in the capacity that it is vacuum compatible, insensitive to magnetic elds and has the potential to be implemented directly into the inertial reference. In this work, inertial noise post-correction in a simulated high motion environment is shown, correcting from a short term stability of 8 x 10 ̄3 m/s2/√Hz to 5 x 10 ̄4 m/s2/√Hz. Post-correction was limited by the parasitic cavities within the ber required for optical read-out of the harmonic oscillator displacement and intensity noise uctuations of the source laser. The results shown within this work are congruent with previous works on atom chip gravimeters, both of which help move towards portable hand-held gravimeter measurement heads capable of sensitive inertial measurement.