Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2305.00547 · Journal of Quantum Information Science

Toward Constructing a Continuous Logical Operator for Error-Corrected Quantum Sensing

Cameron Cianci

Published Jan 1, 2023• 3 citations
arXivHTMLPDF

Abstract

Error correction has long been suggested to extend the sensitivity of quantum sensors into the Heisenberg Limit. However, operations on logical qubits are only performed through universal gate sets consisting of finite-sized gates such as Clifford + T. Although these logical gate sets allow for universal quantum computation, the finite gate sizes present a problem for quantum sensing, since in sensing protocols, such as the Ramsey measurement protocol, the signal must act continuously. The difficulty in constructing a continuous logical op-erator comes from the Eastin-Knill theorem, which prevents a continuous sig-nal from being both fault-tolerant to local errors and transverse. Since error correction is needed to approach the Heisenberg Limit in a noisy environment, it is important to explore how to construct fault-tolerant continuous operators. In this paper, a protocol to design continuous logical z-rotations is proposed and applied to the Steane Code. The fault tolerance of the designed operator is investigated using the Knill-Laflamme conditions. The Knill-Laflamme condi-tions indicate that the diagonal unitary operator constructed cannot be fault tolerant solely due to the possibilities of X errors on the middle qubit. The ap-proach demonstrated throughout this paper may, however, find success in codes with more qubits such as the Shor code, distance 3 surface code, [15, 1, 3] code, or codes with a larger distance such as the [11, 1, 5] code.

DOI
10.4236/jqis.2023.132004

Related papers

A robust phase of continuous transversal gates in quantum stabilizer codes

Eric Huang, Pierre-Gabriel Rozon, Arpit Dua +2 more

A quantum error correcting code protects encoded logical information against errors. Transversal gates are a naturally fault-tolerant way to manipulate logical qubits but cannot be universal themselves. Protocols such as magic state distillation are needed to achieve universality via measurements and postselection. A phase is a region of parameter space with smoothly varying large-scale statistical properties except at its boundaries. Here, we find a phase of continuously tunable logical unitaries for the surface code implemented by transversal operations and decoding that is robust against dephasing errors. The logical unitaries in this phase have an infidelity that is exponentially suppressed in the code distance compared to their rotation angles. We exploit this to design a simple fault-tolerant protocol for continuous-angle logical rotations. This lowers the overhead for applications requiring many small-angle rotations such as quantum simulation.

arXiv:2510.01319•Oct 1, 2025•13 citations

Qubit CSS codes with Universal Transversal Gates

Arpit Dua, Adam Holmes, Michael J. Gullans +1 more

The Eastin-Knill theorem rules out a universal set of transversal logical gates on any code that detects single-qubit errors. The theorem constrains one partition of the qubits at a time. We show that depth-one layers of few-qubit gates, each respecting its own partition, can together generate a universal logical gate set on an error-correcting code. Each logical gate generator is then a single depth-one layer followed by error correction of the same stabilizer code, with no magic-state distillation, code switching, gauge fixing, lattice surgery, or other gadgets. We show that such codes can be found by applying an entangling circuit to a lower-distance "seed" code admitting a depth-one non-Clifford gate and an appropriate "kernel" code. We construct 47 codes with depth-one generating sets that tolerate at least one faulty gate per layer, including a [[37,1,7]] and a [[59,1,9]] code, both of check weight at most eight.

quant-pharXiv:2610.06730•Oct 6, 2026•1 citation

Continuous Symmetries and Approximate Quantum Error Correction

Philippe Faist, Sepehr Nezami, Victor V. Albert +4 more

Quantum error correction and symmetry arise in many areas of physics, including many-body systems, metrology in the presence of noise, fault-tolerant computation, and holographic quantum gravity. Here, we study the compatibility of these two important principles. If a logical quantum system is encoded into n physical subsystems, we say that the code is covariant with respect to a symmetry group G if a G transformation on the logical system can be realized by performing transformations on the individual subsystems. For a G-covariant code with G a continuous group, we derive a lower bound on the error-correction infidelity following erasure of a subsystem. This bound approaches zero when the number of subsystems nor the dimension d of each subsystem is large. We exhibit codes achieving approximately the same scaling of infidelity with n or d as the lower bound. Leveraging tools from representation theory, we prove an approximate version of the Eastin-Knill theorem for quantum computation: If a code admits a universal set of transversal gates and corrects erasure with fixed accuracy, then, for each logical qubit, we need a number of physical qubits per subsystem that is inversely proportional to the error parameter. We construct codes covariant with respect to the full logical unitary group, achieving good accuracy for large d (using random codes) or n (using codes based on W states). We systematically construct codes covariant with respect to general groups, obtaining natural generalizations of qubit codes to, for instance, oscillators and rotors. In the context of the AdS/CFT correspondence, our approach provides insight into how time evolution in the bulk corresponds to time evolution on the boundary without violating the Eastin-Knill theorem, and our five-rotor code can be stacked to form a covariant holographic code.

arXiv:1902.07714•Physical Review X•Oct 26, 2020•147 citations

Engineering logical gates with irrep surface codes

Yabo Li, Zijian Song, Vieri Mattei +3 more

Fault-tolerant quantum computation can incur a substantial resource cost when a desired logical operation must be constructed from a restricted set of logical primitives. To make such operations directly available, we introduce irrep surface codes (ISCs), two-dimensional topological quantum error-correcting codes engineered to transversally implement a prescribed set of logical gates. The target logical gates only need to satisfy two conditions: (i) they generate a finite group, which, up to global phases, is forced by the Eastin-Knill theorem, and (ii) they are irreducible, meaning that any operator commuting with the set of gates must be proportional to the identity. This accommodates arbitrary finite groups of diagonal gates and arbitrary reversible classical gates, since each can be embedded into a larger irreducible finite group of gates. It also enables logical gates outside every finite level of the Clifford hierarchy. To incorporate these operations into surface-code computations, we further develop lattice-surgery protocols to transfer the encoded information between surface codes and ISCs obeying one of two sufficient conditions. Together, these results establish a systematic method for tailoring topological codes to desired logical operations and integrating them into conventional computations.

quant-pharXiv:2610.06775•Oct 6, 2026•2 citations

New pathways to universal quantum logic in the early era of fault tolerance

Friederike Butt

Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.

•Jan 1, 2026•0 citations

Error-structure-tailored early fault-tolerant quantum computing

Pei Zeng, Guo Zheng, Qian Xu +1 more

Fault tolerance is widely regarded as indispensable for achieving scalable and reliable quantum computing. However, the spacetime overhead required for fault-tolerant quantum computating remains prohibitively large. A critical challenge arises in many quantum algorithms with Clifford + $\varphi$ compiling, where logical rotation gates $R_{Z_L}(\varphi)$ serve as essential components. The Eastin-Knill theorem prevents their transversal implementation in quantum error correction codes and necessitating resource-intensive workarounds through T-gate compilation combined with magic state distillation and injection. In this work, we consider error-structure-tailored fault tolerance, where fault-tolerance conditions are analyzed by combining perturbative analysis of realistic dissipative noise processes with the structural properties of stabilizer codes. Based on this framework, we design 1-fault-tolerant continuous-angle rotation gates in stabilizer codes, implemented via dispersive-coupling Hamiltonians. Our approach could circumvent the need for T-gate compilation and distillation, offering a hardware-efficient solution that maintains simplicity, minimizes physical footprint, and requires only nearest-neighbor interactions. Integrating with recent small-angle-state preparation techniques, we can suppress the gate error to $91|\varphi| p^2$ for small rotation angle (where p denotes the physical error rate). For current achievable hardware parameters ($p=10^{-3}$), this enables reliable execution of over $10^7$ small-angle rotations when $|\varphi|\approx 10^{-3}$, meeting the requirements of many near-term quantum applications. Compared to the 15-to-1 magic state distillation and magic state cultivation approaches, our method reduces spacetime resource costs by factors of 1337.5 and 43.6, respectively, for a Heisenberg Hamiltonian simulation task under realistic hardware assumptions.

quant-pharXiv:2511.19983•Nov 26, 2025•9 citations
Error correction has long been suggested to extend the sensitivity of quantum sensors into the Heisenberg Limit. However, operations on logical qubits are only performed through universal gate sets consisting of finite-sized gates such as Clifford + T. Although these logical gate sets allow for universal quantum computation, the finite gate sizes present a problem for quantum sensing, since in sensing protocols, such as the Ramsey measurement protocol, the signal must act continuously. The difficulty in constructing a continuous logical op-erator comes from the Eastin-Knill theorem, which prevents a continuous sig-nal from being both fault-tolerant to local errors and transverse. Since error correction is needed to approach the Heisenberg Limit in a noisy environment, it is important to explore how to construct fault-tolerant continuous operators. In this paper, a protocol to design continuous logical z-rotations is proposed and applied to the Steane Code. The fault tolerance of the designed operator is investigated using the Knill-Laflamme conditions. The Knill-Laflamme condi-tions indicate that the diagonal unitary operator constructed cannot be fault tolerant solely due to the possibilities of X errors on the middle qubit. The ap-proach demonstrated throughout this paper may, however, find success in codes with more qubits such as the Shor code, distance 3 surface code, [15, 1, 3] code, or codes with a larger distance such as the [11, 1, 5] code.
A quantum error correcting code protects encoded logical information against errors. Transversal gates are a naturally fault-tolerant way to manipulate logical qubits but cannot be universal themselves. Protocols such as magic state distillation are needed to achieve universality via measurements and postselection. A phase is a region of parameter space with smoothly varying large-scale statistical properties except at its boundaries. Here, we find a phase of continuously tunable logical unitaries for the surface code implemented by transversal operations and decoding that is robust against dephasing errors. The logical unitaries in this phase have an infidelity that is exponentially suppressed in the code distance compared to their rotation angles. We exploit this to design a simple fault-tolerant protocol for continuous-angle logical rotations. This lowers the overhead for applications requiring many small-angle rotations such as quantum simulation.
The Eastin-Knill theorem rules out a universal set of transversal logical gates on any code that detects single-qubit errors. The theorem constrains one partition of the qubits at a time. We show that depth-one layers of few-qubit gates, each respecting its own partition, can together generate a universal logical gate set on an error-correcting code. Each logical gate generator is then a single depth-one layer followed by error correction of the same stabilizer code, with no magic-state distillation, code switching, gauge fixing, lattice surgery, or other gadgets. We show that such codes can be found by applying an entangling circuit to a lower-distance "seed" code admitting a depth-one non-Clifford gate and an appropriate "kernel" code. We construct 47 codes with depth-one generating sets that tolerate at least one faulty gate per layer, including a [[37,1,7]] and a [[59,1,9]] code, both of check weight at most eight.
Quantum error correction and symmetry arise in many areas of physics, including many-body systems, metrology in the presence of noise, fault-tolerant computation, and holographic quantum gravity. Here, we study the compatibility of these two important principles. If a logical quantum system is encoded into n physical subsystems, we say that the code is covariant with respect to a symmetry group G if a G transformation on the logical system can be realized by performing transformations on the individual subsystems. For a G-covariant code with G a continuous group, we derive a lower bound on the error-correction infidelity following erasure of a subsystem. This bound approaches zero when the number of subsystems nor the dimension d of each subsystem is large. We exhibit codes achieving approximately the same scaling of infidelity with n or d as the lower bound. Leveraging tools from representation theory, we prove an approximate version of the Eastin-Knill theorem for quantum computation: If a code admits a universal set of transversal gates and corrects erasure with fixed accuracy, then, for each logical qubit, we need a number of physical qubits per subsystem that is inversely proportional to the error parameter. We construct codes covariant with respect to the full logical unitary group, achieving good accuracy for large d (using random codes) or n (using codes based on W states). We systematically construct codes covariant with respect to general groups, obtaining natural generalizations of qubit codes to, for instance, oscillators and rotors. In the context of the AdS/CFT correspondence, our approach provides insight into how time evolution in the bulk corresponds to time evolution on the boundary without violating the Eastin-Knill theorem, and our five-rotor code can be stacked to form a covariant holographic code.
Fault-tolerant quantum computation can incur a substantial resource cost when a desired logical operation must be constructed from a restricted set of logical primitives. To make such operations directly available, we introduce irrep surface codes (ISCs), two-dimensional topological quantum error-correcting codes engineered to transversally implement a prescribed set of logical gates. The target logical gates only need to satisfy two conditions: (i) they generate a finite group, which, up to global phases, is forced by the Eastin-Knill theorem, and (ii) they are irreducible, meaning that any operator commuting with the set of gates must be proportional to the identity. This accommodates arbitrary finite groups of diagonal gates and arbitrary reversible classical gates, since each can be embedded into a larger irreducible finite group of gates. It also enables logical gates outside every finite level of the Clifford hierarchy. To incorporate these operations into surface-code computations, we further develop lattice-surgery protocols to transfer the encoded information between surface codes and ISCs obeying one of two sufficient conditions. Together, these results establish a systematic method for tailoring topological codes to desired logical operations and integrating them into conventional computations.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Fault tolerance is widely regarded as indispensable for achieving scalable and reliable quantum computing. However, the spacetime overhead required for fault-tolerant quantum computating remains prohibitively large. A critical challenge arises in many quantum algorithms with Clifford + φ\varphiφ compiling, where logical rotation gates RZL(φ)R_{Z_L}(\varphi)RZL​​(φ) serve as essential components. The Eastin-Knill theorem prevents their transversal implementation in quantum error correction codes and necessitating resource-intensive workarounds through T-gate compilation combined with magic state distillation and injection. In this work, we consider error-structure-tailored fault tolerance, where fault-tolerance conditions are analyzed by combining perturbative analysis of realistic dissipative noise processes with the structural properties of stabilizer codes. Based on this framework, we design 1-fault-tolerant continuous-angle rotation gates in stabilizer codes, implemented via dispersive-coupling Hamiltonians. Our approach could circumvent the need for T-gate compilation and distillation, offering a hardware-efficient solution that maintains simplicity, minimizes physical footprint, and requires only nearest-neighbor interactions. Integrating with recent small-angle-state preparation techniques, we can suppress the gate error to 91∣φ∣p291|\varphi| p^291∣φ∣p2 for small rotation angle (where p denotes the physical error rate). For current achievable hardware parameters (p=10−3p=10^{-3}p=10−3), this enables reliable execution of over 10710^7107 small-angle rotations when ∣φ∣≈10−3|\varphi|\approx 10^{-3}∣φ∣≈10−3, meeting the requirements of many near-term quantum applications. Compared to the 15-to-1 magic state distillation and magic state cultivation approaches, our method reduces spacetime resource costs by factors of 1337.5 and 43.6, respectively, for a Heisenberg Hamiltonian simulation task under realistic hardware assumptions.