Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2303.07559 · Communications Physics

Quantum double lock-in amplifier

Sijie Chen, Min Zhuang, Ruihuang Fang, Y. J. Chen, Chengyin Han, Bo Lü, Jiahao Huang, Chaohong Lee

Published Jun 13, 2024• 11 citations
arXivHTMLPDF

Abstract

Abstract Quantum lock-in amplifiers have been proposed to extract an alternating signal from a strong noise background. However, due to the typical target signal has unknown initial phase, it is challenging to extract complete information about the signal’s amplitude, frequency, and initial phase. Here, we present a general protocol for achieving a quantum double lock-in amplifier by employing two quantum mixers operating under orthogonal pulse sequences. To demonstrate the practical implementation, we discuss the experimental feasibility using a five-level double-Λ coherent population trapping system with Rb atoms. Here, each Λ structure acts as a quantum mixer, and two applied dynamical decoupling sequences serve as orthogonal reference signals. Notably, the system significantly reduces the total measurement time by nearly half and mitigates time-dependent systematic errors compared to conventional two-level systems. Furthermore, our quantum double lock-in amplifier is robust against experimental imperfections. This study establishes a pathway to alternating signal measurement, thereby facilitating the development of practical quantum sensing technologies.

DOI
10.1038/s42005-024-01687-6

Related papers

Quantum double lock-in detection via sequential orthogonal quantum mixing

Min Zhuang, Sijie Chen, Jiahao Huang +1 more

High-precision measurement of oscillating signal is a ubiquitous issue in fundamental science and a critical task in practical technologies. In quantum metrology, quantum lock-in detection provide an efficient method for measuring such signal. In general, when the initial phase of the oscillating signal is unknown,quantum double lock-in detection can effectively extract complete information about the signal's amplitude, frequency, and initial phase. Conventional quantum double lock-in detection requires two individual quantum interferometry, each of which must undergo state preparation and readout. However, the time for state preparation and readout need not be negligible in practical experiments. In particular, the time for state preparation is longer than the time for sensing. To save experimental resources, it is challenging to achieve quantum double lock-in detection just via a single quantum interferometry while still extracting complete information about the signal's amplitude, frequency, and initial phase. Here, we present a general protocol for achieving a quantum double lock-in detection just via a single quantum interferometry under a sequential orthogonal periodic multipulse sequences. In particular, if the input state is a Greenberger-Horne-Zeilinger state and two interaction-based operations are applied during interferometry, the measurement precisions for frequency, amplitude, and initial phase can both approach the Heisenberg limit. Our study paves a new way for measuring oscillating signals with a single quantum interferometry, and provides a feasible method for achieving Heisenberg-limited detection of alternating signals.

quant-pharXiv:2609.39498•Oct 1, 2026•0 citations

Quantum Lock-In Detection via Successive Adiabatic Evolution

Kangze Li, Siqi Chen, Hao Zhang +3 more

In recent years, quantum lock-in detection has emerged as a promising technique to accurately detect weak signals submerged in background noise. However, the signal-to-noise ratio of existing protocols is severely limited by spectral leakage resulting from control operations implemented in pulse form. Here, we propose a general protocol for realizing quantum lock-in detection by employing successive quantum adiabatic evolution. In our protocol, the signal modulation is achieved by adiabatically controlling the time evolution of the quantum probe, which enables the implementation of sinusoidal modulation functions. The realization of sinusoidal-wave modulation substantially mitigates the problem of spectral leakage and facilitates the extraction of the complete characteristics of the target signals. We present a practical implementation scheme of adiabatic quantum lock-in detection based on nitrogen-vacancy centers in diamond, and demonstrate that the proposed protocol possesses strong resilience against experimental imperfections. Our results establish adiabatic quantum lock-in detection as a robust and experimentally accessible approach to detection of weak alternating signals in noisy environments, thus promoting the advance of real-world quantum sensing technologies.

quant-pharXiv:2607.15121•Quantum Science and Technology•Jul 17, 2026•1 citation

High-frequency dual-channel lock-in detection via rapidly oscillating driving

Kangze Li, Xu Zhao, Liantuan Xiao +1 more

Here we propose a general protocol for dual-channel lock-in detection of high-frequency ac signals. We find that the effect of a high-frequency target signal can be modulated through the application of rapidly oscillating driving fields. Based on this mechanism, we develop a quantum dual-channel lock-in detection protocol for high-frequency signals, which not only extends the accessible frequency range of quantum sensing but also enables the simultaneous estimation of the signal amplitude and initial phase. Furthermore, we present a feasible implementation scheme of the protocol based on nitrogen-vacancy centers in diamond. Numerical simulations demonstrate that the proposed protocol can effectively filter out background noise and significantly improve the signal-to-noise ratio. Our results provide a promising approach for realizing noise-resistant detection of weak signals in the high-frequency regime.

quant-pharXiv:2607.17854•Jul 21, 2026•0 citations

Entanglement-enhanced quantum lock-in detection achieving Heisenberg scaling

Jiawei Zhang, M. Zhuang, B. Wang +9 more

Quantum lock-in detection (QLID) is a powerful technique for extracting weak oscillating signals within noise. While entanglement may enhance measurement precision beyond the standard quantum limit (SQL), its integration with QLID is still an experimental challenge. Here we report the first experimental realization of entanglement-enhanced QLID using two trapped 40Ca+ ions. We prepare a Greenberger-Horne-Zeilinger (GHZ) state using a Mϕlmer-Sϕrensen gate and then apply periodic multipulse sequences to execute QLID. Using the GHZ state, the measurement precision approaches the Heisenberg limit (Δω ∝ N−1), surpassing the SQL (Δω ∝ N−1/2) achievable with non-entangled states. Notably, QLID achieves a superior inverse-quadratic temporal scaling (Δω ∝ T−2), exceeding the conventional inverse-linear scaling (Δω ∝ T−1), regardless of entanglement. We further optimize pulse sequences for enhanced robustness against experimental errors. This work establishes a powerful pathway to Heisenberg-limited quantum sensing of weak oscillating signals within noise. Quantum lock-in detection (QLID) is crucial for extracting oscillating signals from noise, while quantum entanglement is vital to surpass the standard of quantum limit in precision measurement. Here, the authors experimentally realise entanglement-enhanced QLID using two trapped ions, achieving frequency measurement precision at the Heisenberg limit and demonstrating an improved inverse-quadratic temporal scaling.

Nature Communications•Dec 6, 2025•3 citations

AC atom interferometry with quantum lock-in sensing

Jonathan Coslovsky, Gadi Afek, Nir Davidson

This paper describes a technique that allows measurement of very small alternating accelerations. It is based on a quantum version of a lock-in amplifier,1 which filters out spectral components far from the frequency of the measured signal, improving the signal-to-noise ratio of the measurement. As a proof-of-principle, a controlled experiment using microwave radiation is performed, modulating the phase of the control pulses at a given frequency. A strong response at twice the modulation frequency is observed as expected. Preliminary results of measurements taken with Raman control are also presented, in which a controlled modulation of the phase was obtained by modulating a piezoelectric actuator, causing one of the Raman mirrors to vibrate.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 20, 2017•2 citations

Random pulse sequences for qubit noise spectroscopy

K. H. Huang, Demitry Farfurnik, Alireza Seif +2 more

Qubit noise spectroscopy is an important tool for the experimental investigation of open quantum systems. However, conventional techniques for noise spectroscopy are time-consuming, because they require measurements of the noise spectral density at many different frequencies. Here we describe an alternative approach to noise spectroscopy, which requires fewer resources, and relies on direct measurement of arbitrary linear functionals of the noise spectral density. This method uses random pulse sequences with carefully controlled correlations, which are chosen using algorithms for phase retrieval. These measurements allow us to reconstruct sparse noise spectra via compressed sensing. Our simulations of the performance of the random pulse sequences on a realistic physical system, self-assembled quantum dots, reveal a speedup of an order of magnitude in extracting the noise spectrum, compared to conventional dynamical decoupling approaches.

arXiv:2303.00909•Physical Review Applied•May 30, 2025•14 citations
Abstract Quantum lock-in amplifiers have been proposed to extract an alternating signal from a strong noise background. However, due to the typical target signal has unknown initial phase, it is challenging to extract complete information about the signal’s amplitude, frequency, and initial phase. Here, we present a general protocol for achieving a quantum double lock-in amplifier by employing two quantum mixers operating under orthogonal pulse sequences. To demonstrate the practical implementation, we discuss the experimental feasibility using a five-level double-Λ coherent population trapping system with Rb atoms. Here, each Λ structure acts as a quantum mixer, and two applied dynamical decoupling sequences serve as orthogonal reference signals. Notably, the system significantly reduces the total measurement time by nearly half and mitigates time-dependent systematic errors compared to conventional two-level systems. Furthermore, our quantum double lock-in amplifier is robust against experimental imperfections. This study establishes a pathway to alternating signal measurement, thereby facilitating the development of practical quantum sensing technologies.
High-precision measurement of oscillating signal is a ubiquitous issue in fundamental science and a critical task in practical technologies. In quantum metrology, quantum lock-in detection provide an efficient method for measuring such signal. In general, when the initial phase of the oscillating signal is unknown,quantum double lock-in detection can effectively extract complete information about the signal's amplitude, frequency, and initial phase. Conventional quantum double lock-in detection requires two individual quantum interferometry, each of which must undergo state preparation and readout. However, the time for state preparation and readout need not be negligible in practical experiments. In particular, the time for state preparation is longer than the time for sensing. To save experimental resources, it is challenging to achieve quantum double lock-in detection just via a single quantum interferometry while still extracting complete information about the signal's amplitude, frequency, and initial phase. Here, we present a general protocol for achieving a quantum double lock-in detection just via a single quantum interferometry under a sequential orthogonal periodic multipulse sequences. In particular, if the input state is a Greenberger-Horne-Zeilinger state and two interaction-based operations are applied during interferometry, the measurement precisions for frequency, amplitude, and initial phase can both approach the Heisenberg limit. Our study paves a new way for measuring oscillating signals with a single quantum interferometry, and provides a feasible method for achieving Heisenberg-limited detection of alternating signals.
In recent years, quantum lock-in detection has emerged as a promising technique to accurately detect weak signals submerged in background noise. However, the signal-to-noise ratio of existing protocols is severely limited by spectral leakage resulting from control operations implemented in pulse form. Here, we propose a general protocol for realizing quantum lock-in detection by employing successive quantum adiabatic evolution. In our protocol, the signal modulation is achieved by adiabatically controlling the time evolution of the quantum probe, which enables the implementation of sinusoidal modulation functions. The realization of sinusoidal-wave modulation substantially mitigates the problem of spectral leakage and facilitates the extraction of the complete characteristics of the target signals. We present a practical implementation scheme of adiabatic quantum lock-in detection based on nitrogen-vacancy centers in diamond, and demonstrate that the proposed protocol possesses strong resilience against experimental imperfections. Our results establish adiabatic quantum lock-in detection as a robust and experimentally accessible approach to detection of weak alternating signals in noisy environments, thus promoting the advance of real-world quantum sensing technologies.
Here we propose a general protocol for dual-channel lock-in detection of high-frequency ac signals. We find that the effect of a high-frequency target signal can be modulated through the application of rapidly oscillating driving fields. Based on this mechanism, we develop a quantum dual-channel lock-in detection protocol for high-frequency signals, which not only extends the accessible frequency range of quantum sensing but also enables the simultaneous estimation of the signal amplitude and initial phase. Furthermore, we present a feasible implementation scheme of the protocol based on nitrogen-vacancy centers in diamond. Numerical simulations demonstrate that the proposed protocol can effectively filter out background noise and significantly improve the signal-to-noise ratio. Our results provide a promising approach for realizing noise-resistant detection of weak signals in the high-frequency regime.
Quantum lock-in detection (QLID) is a powerful technique for extracting weak oscillating signals within noise. While entanglement may enhance measurement precision beyond the standard quantum limit (SQL), its integration with QLID is still an experimental challenge. Here we report the first experimental realization of entanglement-enhanced QLID using two trapped 40Ca+ ions. We prepare a Greenberger-Horne-Zeilinger (GHZ) state using a Mϕlmer-Sϕrensen gate and then apply periodic multipulse sequences to execute QLID. Using the GHZ state, the measurement precision approaches the Heisenberg limit (Δω ∝ N−1), surpassing the SQL (Δω ∝ N−1/2) achievable with non-entangled states. Notably, QLID achieves a superior inverse-quadratic temporal scaling (Δω ∝ T−2), exceeding the conventional inverse-linear scaling (Δω ∝ T−1), regardless of entanglement. We further optimize pulse sequences for enhanced robustness against experimental errors. This work establishes a powerful pathway to Heisenberg-limited quantum sensing of weak oscillating signals within noise. Quantum lock-in detection (QLID) is crucial for extracting oscillating signals from noise, while quantum entanglement is vital to surpass the standard of quantum limit in precision measurement. Here, the authors experimentally realise entanglement-enhanced QLID using two trapped ions, achieving frequency measurement precision at the Heisenberg limit and demonstrating an improved inverse-quadratic temporal scaling.
This paper describes a technique that allows measurement of very small alternating accelerations. It is based on a quantum version of a lock-in amplifier,1 which filters out spectral components far from the frequency of the measured signal, improving the signal-to-noise ratio of the measurement. As a proof-of-principle, a controlled experiment using microwave radiation is performed, modulating the phase of the control pulses at a given frequency. A strong response at twice the modulation frequency is observed as expected. Preliminary results of measurements taken with Raman control are also presented, in which a controlled modulation of the phase was obtained by modulating a piezoelectric actuator, causing one of the Raman mirrors to vibrate.
Qubit noise spectroscopy is an important tool for the experimental investigation of open quantum systems. However, conventional techniques for noise spectroscopy are time-consuming, because they require measurements of the noise spectral density at many different frequencies. Here we describe an alternative approach to noise spectroscopy, which requires fewer resources, and relies on direct measurement of arbitrary linear functionals of the noise spectral density. This method uses random pulse sequences with carefully controlled correlations, which are chosen using algorithms for phase retrieval. These measurements allow us to reconstruct sparse noise spectra via compressed sensing. Our simulations of the performance of the random pulse sequences on a realistic physical system, self-assembled quantum dots, reveal a speedup of an order of magnitude in extracting the noise spectrum, compared to conventional dynamical decoupling approaches.