Flux-biased loops including one or more Josephson junctions are ubiquitous elements in quantum information experiments based on superconducting circuits.These quantum circuits can be tuned to implement a variety of Hamiltonians, with applications ranging from decoherence-protected qubits to quantum limited converters and amplifiers.The extrema of the Hamiltonian of these circuits are of special interest because they govern their low-energy dynamics.However, the theory of superconducting quantum circuits so far lacks a systematic method to find these extrema and compute the series expansion of the Hamiltonian in their vicinity for an arbitrary nonlinear superconducting circuit.We present such a method, which can aid the synthesis of new functionalities in quantum devices.
Flux-biased loops including one or more Josephson junctions are ubiquitous elements in quantum information experiments based on superconducting circuits.These quantum circuits can be tuned to implement a variety of Hamiltonians, with applications ranging from decoherence-protected qubits to quantum limited converters and amplifiers.The extrema of the Hamiltonian of these circuits are of special interest because they govern their low-energy dynamics.However, the theory of superconducting quantum circuits so far lacks a systematic method to find these extrema and compute the series expansion of the Hamiltonian in their vicinity for an arbitrary nonlinear superconducting circuit.We present such a method, which can aid the synthesis of new functionalities in quantum devices.
Fluxonium qubits, designed to mitigate charge noise and enhance anharmonicity, are among the most promising superconducting platforms for quantum computing. To understand and exploit their quantum properties and design novel fluxonium-based architectures with improved functionalities, these systems require an accurate Hamiltonian formulation to capture their energy level structure and quantum dynamics. This work presents a systematic method for constructing the Hamiltonian for multi-loop circuits that partitions the system into a set of uncoupled harmonic oscillators and a coupled anharmonic part originating from the Josephson circuit elements, allowing clear identification of independent modes and isolating the nonlinearity in the Josephson terms. While demonstrated for fluxonium-type multi-loop circuits, this method can be generalized to other superconducting qubit architectures within the broader context of circuit QED, making it a versatile tool for exploring different circuit configurations. Our systematic and flexible modeling approach forms the theoretical basis for the qubit measurement and control experiments validating multi-loop fluxonium architectures.
Tunable Josephson harmonics open new avenues for qubit design. We demonstrate a superconducting circuit element consisting of a tunnel junction in series with a SQUID loop, yielding a Josephson potential whose harmonic content is strongly tunable by magnetic flux. Through spectroscopy of the first four qubit transitions, together with an effective single-mode model renormalized by the internal mode, we resolve a second harmonic with an amplitude up to ∼10% of the fundamental. We identify a flux sweet spot where the dispersive shift vanishes, achieved by balancing the dispersive couplings to the internal and qubit modes. This highly tunable element provides a route toward protected qubits and customizable nonlinear microwave devices.
Superconducting quantum interference devices (SQUIDs), single flux-quantum (SFQ) logic circuits, and quantum Josephson junction circuits have been developed into a family of superconductor integrated circuit, and are widely applied for subtle magnetic-field measurements, energy-efficient computing, and quantum computing, respectively. They are Josephson junction networks composed of Josephson junctions and normal resistor-inductor-capacitor (RLC) components, working with the fluxoid-quantization principle and Josephson effects to achieve unique flux-modulated dynamics and characteristics; they react to the vector potential of magnetic fields rather than the electric potential. However, the conventional circuit diagrams and nodal analysis methods focus on the electric charges flowing though branches and nodes, ignoring dynamics of the magnetic fluxes flowing from loop to loop. This article introduces a general flux-based circuit theory to unify the analyses of Josephson junction circuits and normal RLC circuits. This theory presents a magnetic-flux-generator (MFG) concept to unify Josephson junctions and normal circuit elements, and abstract both Josephson junction circuits and normal RLC circuits as MFG network; it derives a general network equation to describe dynamics of Josephson junction circuits, and invents a kind of magnetic-flux flow (MFF) diagram to depict the working principles of magnetic-flux flows inside Josephson junction circuits. The flux-based theory is complementary to the conventional circuit theories in the design and analysis of superconductor integrated circuits.
Possible approaches to the creation of Josephson superconducting circuits with a high linearity of transformation of a magnetic signal into voltage and a wide dynamic range have been described. Realization of such circuit by the creation of a special spatial inhomogeneity in chains of Josephson junctions and connection of these chains into a differential circuit has been considered. A new method for linearizing the transfer function of a single two-junction superconducting quantum interference device, which is an elementary cell of the chain, by connecting to it an additional loop playing the role of a nonlinear transformer of the magnetic flux has been described. For both approaches, the basic analytical expressions describing the synthesized circuits are presented. The data on numerical calculation and experimental measurements of samples produced on the basis of niobium technology with the critical current density of Josephson junctions of 4.5 kA/cm 2 are reported. The approaches developed in the work can serve as a basis for the creation of highly efficient gigahertz superconducting amplifiers for cellular and satellite communications and can be applied for improving the characteristics of SQUID-based devices.
The three-junction flux qubit (quantum bit) consists of three Josephson junctions connected in series on a superconducting loop. We present a numerical treatment of this device for the general case in which the ratio ${\ensuremath{\beta}}_{Q}$ of the geometrical inductance of the loop to the kinetic inductance of the Josephson junctions is not necessarily negligible. Relatively large geometric inductances allow the flux through each qubit to be controlled independently with on-chip bias lines, an essential consideration for scalability. We derive the three-dimensional potential in terms of the macroscopic degrees of freedom, and include the possible effects of asymmetry among the junctions and of stray capacitance associated with them. To find solutions of the Hamiltonian, we use basis functions consisting of the product of two plane wave states and a harmonic oscillator eigenfunction to compute the energy levels and eigenfunctions of the qubit numerically. We present calculated energy levels for the relevant range of ${\ensuremath{\beta}}_{Q}$. As ${\ensuremath{\beta}}_{Q}$ is increased beyond 0.5, the tunnel splitting between the ground and first excited states decreases rapidly, and the device becomes progressively less useful as a qubit.
Quantum computers utilize qubits to store and process quantum information. In superconducting quantum computers, qubits are implemented as quantum superconducting resonant circuits. The circuits are operated only at the two energy states, which form the computational basis for the qubit. To suppress leakage to uncomputational states, superconducting qubits are designed to be anharmonic oscillators, which is achieved using one or more Josephson junctions, a nonlinear superconducting element. One of the main challenges in developing quantum computers is minimizing the decoherence caused by environmental noise. Decoherence is characterized by two coherence times, T1 for depolarization processes and T2 for dephasing. This thesis reviews and investigates the decoherence properties of superconducting qubits. The main goal of the thesis is to analyze the tradeoff between anharmonicity and dephasing in a qubit unimon. Recently developed unimon incorporates a single Josephson junction shunted by a linear inductor and a capacitor. Unimon is tunable by external magnetic flux, and at the half flux quantum bias, the Josephson energy is partially canceled by the inductive energy, allowing unimon to have relatively high anharmonicity while remaining fully protected against low-frequency charge noise. In addition, at the sweet spot with respect to the magnetic flux, unimon becomes immune to first-order perturbations in the flux. The sweet spot, however, is relatively narrow, making unimon susceptible to dephasing through the quadratic coupling to the flux noise. In the first chapter of this thesis, we present a comprehensive look into the basic theory of superconducting qubits, starting with two-state quantum systems, followed by superconductivity and superconducting circuit elements, and finally combining these two by introducing circuit quantum electrodynamics (cQED), a framework for building superconducting qubits. We follow with a theoretical discussion of decoherence in two-state quantum systems, described by the Bloch-Redfield formalism. We continue the discussion by estimating decoherence using perturbation theory, with special care put into the dephasing due to the low-frequency 1/f noise. Finally, we review the theoretical model of unimon, which is used in the numerical analysis. As a main result of this thesis, we suggest a design parameter regime for unimon, which gives the best ratio between anharmonicity and T2.