Fault-tolerant quantum error correction provides a strategy to protect information processed by a quantum computer against noise which would otherwise corrupt the data. A fault-tolerant universal quantum computer must implement a universal gate set on the logical level in order to perform arbitrary calculations to in principle unlimited precision. In this paper we characterize the recent demonstration of a fault-tolerant universal gate set in a trapped-ion quantum computer [Postler et al., Nature (London) 605, 7911 (2022)] and identify aspects to improve the design of experimental setups to reach an advantage of logical over physical qubit operation. We show that various criteria to assess the break-even point for fault-tolerant quantum operations are within reach for the ion trap quantum computing architecture under consideration. Furthermore, we analyze the influence of crosstalk in entangling gates for logical state preparation circuits. These circuits can be designed to respect fault tolerance for specific microscopic noise models. We find that an experimentally informed depolarizing noise model captures the essential noise dynamics of the fault-tolerant experiment that we consider, and crosstalk is negligible in the currently accessible regime of physical error rates. For deterministic Pauli state preparation, we provide a fault-tolerant unitary logical qubit initialization circuit, which can be realized without in-sequence measurement and feed-forward of classical information. Additionally, we show that nondeterministic state preparation schemes, i.e., repeat until success, for logical Pauli and magic states perform with higher logical fidelity over their deterministic counterparts for the current and anticipated future regime of physical error rates. Our results offer guidance on improvements of physical qubit operations and validate the experimentally informed noise model as a tool to predict logical failure rates in quantum computing architectures based on trapped ions.
Fault-tolerant quantum error correction provides a strategy to protect information processed by a quantum computer against noise which would otherwise corrupt the data. A fault-tolerant universal quantum computer must implement a universal gate set on the logical level in order to perform arbitrary calculations to in principle unlimited precision. In this paper we characterize the recent demonstration of a fault-tolerant universal gate set in a trapped-ion quantum computer [Postler et al., Nature (London) 605, 7911 (2022)] and identify aspects to improve the design of experimental setups to reach an advantage of logical over physical qubit operation. We show that various criteria to assess the break-even point for fault-tolerant quantum operations are within reach for the ion trap quantum computing architecture under consideration. Furthermore, we analyze the influence of crosstalk in entangling gates for logical state preparation circuits. These circuits can be designed to respect fault tolerance for specific microscopic noise models. We find that an experimentally informed depolarizing noise model captures the essential noise dynamics of the fault-tolerant experiment that we consider, and crosstalk is negligible in the currently accessible regime of physical error rates. For deterministic Pauli state preparation, we provide a fault-tolerant unitary logical qubit initialization circuit, which can be realized without in-sequence measurement and feed-forward of classical information. Additionally, we show that nondeterministic state preparation schemes, i.e., repeat until success, for logical Pauli and magic states perform with higher logical fidelity over their deterministic counterparts for the current and anticipated future regime of physical error rates. Our results offer guidance on improvements of physical qubit operations and validate the experimentally informed noise model as a tool to predict logical failure rates in quantum computing architectures based on trapped ions.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.
Logical qubits can be protected from decoherence by performing quantum error-correction (QEC) cycles repeatedly. Algorithms for fault-tolerant QEC must be compiled to the specific hardware platform under consideration in order to practically realize a quantum memory that operates for in principle arbitrary long times. All circuit components must be assumed as noisy unless specific assumptions about the form of the noise are made. Modern QEC schemes are challenging to implement experimentally in physical architectures where in-sequence measurements and feed forward of classical information cannot be reliably executed fast enough or even at all. Here we provide a novel scheme to perform QEC cycles without the need of measuring qubits that is fully fault-tolerant with respect to all components used in the circuit. Our scheme can be used for any low-distance CSS code since its only requirement towards the underlying code is a transversal gate. Similarly to Steane-type EC, we coherently copy errors to a logical auxiliary qubit but then apply a coherent feedback operation from the auxiliary system to the logical data qubit. The logical auxiliary qubit is prepared fault tolerantly without measurements, too. We benchmark logical failure rates of the scheme in comparison to a flag-qubit-based EC cycle. We map out a parameter region where our scheme is feasible and estimate physical error rates necessary to achieve the break-even point of beneficial QEC with our scheme. We outline how our scheme could be implemented in ion traps and with neutral atoms in a tweezer array. For recently demonstrated capabilities of atom shuttling and native multiatom Rydberg gates, we achieve moderate circuit depths and beneficial performance of our scheme while not breaking fault tolerance. These results thereby enable practical fault-tolerant QEC in hardware architectures that do not support midcircuit measurements. Published by the American Physical Society 2024
The full potential of quantum computers will be attainable when large devices can employ quantum error correction and attain fault-tolerance. Great strides have been made, with experimental demonstrations of pivotal components for quantum error correction on a variety of platforms, substantiating that the foundations for fault-tolerant logic are realisable. This thesis explores the kinds of noise we expect to find at the logical level while employing schemes for fault-tolerance in this emerging period and how we may optimise such schemes. We study how a noise characteristic called bias is transformed in the implementation of a fault-tolerant gadget for the T-gate. We show that noise bias is amplified at the logical level due to error correction, which is furthermore affected by the noise-transforming properties of the injection gadget, which separately induces logical phase bias. We experimentally characterise the noise on a trapped-ion quantum computer. We target a logical CNOT with this method such that we are able to: understand and mitigate control layer imperfections, account for the distinction in noise characteristics between individual CNOT and transversal CNOTs, and make predictions on logical level performance if these transversal CNOTs are used as a logical CNOT for the Steane code. This is achieved by leveraging information about correlated noise across the device from the physical characterisation of gates, demonstrating that such diagnostic information can be learned scalably. Finally, noting the transversal gate capabilities of recent architectures, we optimise fault-tolerant circuits for preparing magic states in that setting. We describe an algorithm that recompiles and synthesises such circuits for minimal T-depth and low CNOT depth, while maintaining the total qubit count. We apply this algorithm to fault-tolerant circuits for |CCZ>, |CS> and |T> and show how we can reduce overheads for preparing magic states.
Physical qubits in experimental quantum information processors are inevitably exposed to different sources of noise and imperfections, which lead to errors that typically accumulate hindering our ability to perform long computations reliably. Progress towards scalable and robust quantum computation relies on exploiting quantum error correction (QEC) to actively battle these undesired effects. In this work, we present a comprehensive study of crosstalk errors in a quantum-computing architecture based on a single string of ions confined by a radio-frequency trap, and manipulated by individually-addressed laser beams. This type of errors affects spectator qubits that, ideally, should remain unaltered during the application of single- and two-qubit quantum gates addressed at a different set of active qubits. We microscopically model crosstalk errors from first principles and present a detailed study showing the importance of using a coherent vs incoherent error modelling and, moreover, discuss strategies to actively suppress this crosstalk at the gate level. Finally, we study the impact of residual crosstalk errors on the performance of fault-tolerant QEC numerically, identifying the experimental target values that need to be achieved in near-term trapped-ion experiments to reach the break-even point for beneficial QEC with low-distance topological codes.
Abstract The ability to perform quantum error correction (QEC) and robust gate operations on encoded qubits opens the door to demonstrations of quantum algorithms. Contemporary QEC schemes typically require mid-circuit measurements with feed-forward control, which are challenging for qubit control, often slow, and susceptible to relatively high error rates. In this work, we propose and experimentally demonstrate a universal toolbox of fault-tolerant logical operations without mid-circuit measurements on a trapped-ion quantum processor. We present modular logical state teleportation between two four-qubit error-detecting codes without measurements during algorithm execution. Moreover, we realize a fault-tolerant universal gate set on an eight-qubit error-detecting code hosting three logical qubits, based on state injection, which can be executed by coherent gate operations only. We apply this toolbox to experimentally realize Grover's quantum search algorithm fault-tolerantly on three logical qubits encoded in eight physical qubits, with the implementation displaying clear identification of the desired solution states. Our work demonstrates the practical feasibility and provides first steps into the largely unexplored direction of measurement-free quantum computation.
Physical qubits in experimental quantum information processors are inevitably exposed to different sources of noise and imperfections, which lead to errors that typically accumulate hindering our ability to perform long computations reliably.Progress towards scalable and robust quantum computation relies on exploiting quantum error correction (QEC) to actively battle these undesired effects.In this work, we present a comprehensive study of crosstalk errors in a quantumcomputing architecture based on a single string of ions confined by a radio-frequency trap, and manipulated by individuallyaddressed laser beams.This type of errors affects spectator qubits that, ideally, should remain unaltered during the application of single-and two-qubit quantum gates addressed at a different set of active qubits.We microscopically model crosstalk errors from first principles and present a detailed study showing the importance of using a coherent vs incoherent error modelling and, moreover, discuss strategies to actively suppress this crosstalk at the gate level.Finally, we study the impact of residual crosstalk errors on the performance of fault-tolerant QEC numerically, identifying the experimental target values that need to be achieved in near-term trapped-ion experiments to reach the break-even point for beneficial QEC with low-distance topological codes.