Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2212.10958

Verifiable homodyne measurement for detecting non-local properies of light

Go Kato, Kiyoshi Tamaki, Masaki Owari, Koji Azuma

Published Dec 21, 2022• 0 citations
arXivHTMLPDF

Abstract

The homodyne detection is one of the most basic tools for identifying the quantum state of light. It has been used to detect useful non-local properties, such as entanglement for the quantum teleportation and distillability of a secret key in quantum key distribution. In so doing, the detection scheme employs a bright optical pulse, called the local oscillator (LO) pulse, and the LO pulse is usually transmitted along with the signal pulses. The LO pulse is presumed to be a coherent state with an infinite intensity. However, it is difficult in practice to hold this presumption owing to noise in the optical transmission channels or an intervention by a malicious third party. As a result, the implementation may no longer be the homodyne detection, and those outcomes may merely disguise successful detection of entanglement or a secret key. Here, we present an alternative scheme that works as the homodyne detection to detect the non-local properties of light in a verifiable manner, without any presumption for the LO pulses. This scheme is essentially based on the same setup as the conventional implementation for the homodyne detection. This result contributes to close any possible loophole in the homodyne detection caused by the deviation from the ideal LO pulses.

DOI
10.48550/arxiv.2212.10958

Related papers

Non-Gaussian entanglement criteria for atomic homodyne detection

Jaehak Lee, Jiyong Park, Jaewan Kim +2 more

Homodyne measurement is a crucial tool widely used to address continuous variables for bosonic quantum systems. While an ideal homodyne detection provides a powerful analysis, e.g., to effectively measure quadrature amplitudes of light in quantum optics, it relies on the use of a strong reference field, the so-called local oscillator, typically in a coherent state. Such a strong coherent local oscillator may not be readily available, particularly for a massive quantum system like a Bose-Einstein condensate, posing a substantial challenge in dealing with continuous variables appropriately. It is necessary to establish a practical framework that includes the effects of nonideal local oscillators for a rigorous assessment of various quantum tests and applications. We here develop entanglement criteria beyond a Gaussian regime applicable for this realistic homodyne measurement that do not require assumptions on the state of local oscillators. We discuss the working conditions of homodyne detection to effectively detect non-Gaussian quantum entanglement under various states of local oscillators.

arXiv:2401.01228•Physical Review A•Feb 14, 2023•1 citation

Homodyne-like detection scheme based on photon-number-resolving detectors

Alessia Allevi, Matteo Bina, Stefano Olivares +1 more

Homodyne detection is the most effective detection scheme employed in quantum optics to characterize quantum states. It is based on mixing at a beam splitter the signal to be measured with a coherent state, called the “local oscillator,” and on evaluating the difference of the photocurrents of two photodiodes measuring the outputs of the beam splitter. If the local oscillator is much more intense than the field to be measured, the homodyne signal is proportional to the signal-field quadratures. If the local oscillator is less intense, the photodiodes can be replaced with photon-number-resolving detectors, which have a smaller dynamics but can measure the light statistics. The resulting new homodyne-like detector acquires a hybrid nature, being it capable of yielding information on both the particle-like (statistics) and wave-like (phase) properties of light signals. The scheme has been tested in the measurement of the quadratures of coherent states, bracket states and phase-averaged coherent states at different intensities of the local oscillator.

International Journal of Quantum Information•Dec 1, 2017•14 citations

Quantum cryptography using pulsed homodyne detection

Takuya Hirano, Hitoshi Yamanaka, M. Ashikaga +2 more

We report an experimental quantum key distribution that utilizes pulsed homodyne detection, instead of photon counting, to detect weak pulses of coherent light. Although our scheme inherently has a finite error rate, homodyne detection allows high-efficiency detection and quantum state measurement of the transmitted light using only conventional devices at room temperature. Our prototype system works at $1.55\ensuremath{\mu}\mathrm{m}$ wavelength and the quantum channel is a 1-km standard optical fiber. The probability distribution of the measured electric-field amplitude has a Gaussian shape. The effect of experimental imperfections such as optical loss and detector noise can be parametrized by the variance and the mean value of the Gaussian distribution.

arXiv:quant-ph/0008037•Physical Review A•Oct 29, 2003•144 citations

Measurement of the Polarization State of a Weak Signal Field by Homodyne Detection

Sun-Hyun Youn

Information carried by an optical beam of light can usually be conveyed in the form of a temporal modulation of the intensity, phase, frequency or the polarization of the constituent mode(s). In that regard, homodyne detection is one of the most popular and standard method to measure the quantum mechanical properties of light Yuen & Shapiro (1978); Yuen et al. (1979); Yuen & Shapiro (1980); Yurke (1985). The quantum theory of homodyne detection originated principally from the works of Yuen and Shapiro et al. Yuen & Shapiro (1978); Yuen et al. (1979). In this method, a weak signal field is combined with a strong local oscillator field at a beam splitter, and the resulting signal is measured as a photocurrent. With the homodyne detection method, the quantum state of the signal field, such as the quadrature amplitude of the squeezed state, is easily measured Slusher et al. (1985); Wu et al. (1986 ); Polzik et al. (1992), and the quasiprobability distribution function can be measured by using the so-called optical homodyne tomography Smithey et al. (1993); Banaszek & W’odkiewicz (1996); Wallentowitz & Vogel (1996); Youn et al. (2001). Furthermore, optical homodyne detection is used to eavesdrop on the quantum key in quantum cryptography Hirano et al. (2000).

InTech eBooks•Mar 23, 2012•2 citations

Transmission and Detection of Squeezed States of Light through an Optical Fiber with a Real-time True Local Oscillator

Iyad Suleiman, Jens Arnbak, Xueshi Guo +3 more

Transmission and accurate detection of squeezed states of light will play a central role in the future quantum internet, where quantum cryptography, communication and computation will coexist in an organic system. Their coherent detection has recently proven to be crucial for photonics-based quantum computing [1] , and to provide improvements in continuous variables quantum key distribution [2] [6] and quantum sensing [3] . Often when measuring a quantum state through coherent detection, the local oscillator field is transmitted along with the signal; however, in realistic long-distance optical fiber transmissions, where the needed local oscillator optical power increases exponentially with the distance, the system’s performance deteriorates due to nonlinear Brillouin scattering, and wavelength multiplexing schemes may be needed to avoid the issue. Moreover, transmitting a local oscillator opens security loopholes in quantum key distribution systems, where an eavesdropper can defy the security assessment from the trusted parties by gaining control over the local oscillator [4] . It is therefore very important to design coherent detection schemes that make use of independent local oscillators. We demonstrate the transmission single-mode squeezed light at 1550 nm wavelength through single-mode optical fibers (10 m and 10 km lengths) and its homodyne detection, using an independent local oscillator and a real-time phase-control system. Fig. 1a depicts the implemented physical setup: 1550 nm squeezed light is generated through spontaneous parametric downconversion [5] , couples into a single-mode optical fiber and propagates towards the homodyne detector for quadrature measurement. Real-time phase control consists in detecting the interference between a 40 MHz single-sideband pilot mode -phase-locked to the downconverted pump- and the local oscillator, estimating their instantaneous phase difference and implementing a fast and broad FPGA-based phase control on the local oscillator. As shown in Fig. 1b and 1c, with the presented scheme it was possible to steadily measure up to 3.6 dB of squeezing after a 10 m optical fiber transmission, and up to 1.5 dB of squeezing after a 10 km fiber transmission, with similar performance in terms of phase error and control stability. The presented system is simple, robust and cost-effective, and it will represent a standard class of techniques to detect not only squeezed states of light, but any arbitrary quantum state of light, including Schrödinger cat states, highly useful in quantum computation and error correction.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•2 citations

A balanced homodyne detector and local oscillator shaping for measuring optical Schrödinger cat states

Thomas Gerrits, Scott Glancy, Sae Woo Nam

We present our implementation of an optical homodyne detector used to measure optical Schrödinger cat states. We show how we minimized the losses and mode-mismatches associated with homodyne detection, which become important when measuring non-classical states of light. We present a pulse-shaping scheme applied to the local oscillator to improve its temporal mode overlap with the non-classical state.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 27, 2011•5 citations
The homodyne detection is one of the most basic tools for identifying the quantum state of light. It has been used to detect useful non-local properties, such as entanglement for the quantum teleportation and distillability of a secret key in quantum key distribution. In so doing, the detection scheme employs a bright optical pulse, called the local oscillator (LO) pulse, and the LO pulse is usually transmitted along with the signal pulses. The LO pulse is presumed to be a coherent state with an infinite intensity. However, it is difficult in practice to hold this presumption owing to noise in the optical transmission channels or an intervention by a malicious third party. As a result, the implementation may no longer be the homodyne detection, and those outcomes may merely disguise successful detection of entanglement or a secret key. Here, we present an alternative scheme that works as the homodyne detection to detect the non-local properties of light in a verifiable manner, without any presumption for the LO pulses. This scheme is essentially based on the same setup as the conventional implementation for the homodyne detection. This result contributes to close any possible loophole in the homodyne detection caused by the deviation from the ideal LO pulses.
Homodyne measurement is a crucial tool widely used to address continuous variables for bosonic quantum systems. While an ideal homodyne detection provides a powerful analysis, e.g., to effectively measure quadrature amplitudes of light in quantum optics, it relies on the use of a strong reference field, the so-called local oscillator, typically in a coherent state. Such a strong coherent local oscillator may not be readily available, particularly for a massive quantum system like a Bose-Einstein condensate, posing a substantial challenge in dealing with continuous variables appropriately. It is necessary to establish a practical framework that includes the effects of nonideal local oscillators for a rigorous assessment of various quantum tests and applications. We here develop entanglement criteria beyond a Gaussian regime applicable for this realistic homodyne measurement that do not require assumptions on the state of local oscillators. We discuss the working conditions of homodyne detection to effectively detect non-Gaussian quantum entanglement under various states of local oscillators.
Homodyne detection is the most effective detection scheme employed in quantum optics to characterize quantum states. It is based on mixing at a beam splitter the signal to be measured with a coherent state, called the “local oscillator,” and on evaluating the difference of the photocurrents of two photodiodes measuring the outputs of the beam splitter. If the local oscillator is much more intense than the field to be measured, the homodyne signal is proportional to the signal-field quadratures. If the local oscillator is less intense, the photodiodes can be replaced with photon-number-resolving detectors, which have a smaller dynamics but can measure the light statistics. The resulting new homodyne-like detector acquires a hybrid nature, being it capable of yielding information on both the particle-like (statistics) and wave-like (phase) properties of light signals. The scheme has been tested in the measurement of the quadratures of coherent states, bracket states and phase-averaged coherent states at different intensities of the local oscillator.
We report an experimental quantum key distribution that utilizes pulsed homodyne detection, instead of photon counting, to detect weak pulses of coherent light. Although our scheme inherently has a finite error rate, homodyne detection allows high-efficiency detection and quantum state measurement of the transmitted light using only conventional devices at room temperature. Our prototype system works at $1.55\ensuremath{\mu}\mathrm{m}$ wavelength and the quantum channel is a 1-km standard optical fiber. The probability distribution of the measured electric-field amplitude has a Gaussian shape. The effect of experimental imperfections such as optical loss and detector noise can be parametrized by the variance and the mean value of the Gaussian distribution.
Information carried by an optical beam of light can usually be conveyed in the form of a temporal modulation of the intensity, phase, frequency or the polarization of the constituent mode(s). In that regard, homodyne detection is one of the most popular and standard method to measure the quantum mechanical properties of light Yuen & Shapiro (1978); Yuen et al. (1979); Yuen & Shapiro (1980); Yurke (1985). The quantum theory of homodyne detection originated principally from the works of Yuen and Shapiro et al. Yuen & Shapiro (1978); Yuen et al. (1979). In this method, a weak signal field is combined with a strong local oscillator field at a beam splitter, and the resulting signal is measured as a photocurrent. With the homodyne detection method, the quantum state of the signal field, such as the quadrature amplitude of the squeezed state, is easily measured Slusher et al. (1985); Wu et al. (1986 ); Polzik et al. (1992), and the quasiprobability distribution function can be measured by using the so-called optical homodyne tomography Smithey et al. (1993); Banaszek & W’odkiewicz (1996); Wallentowitz & Vogel (1996); Youn et al. (2001). Furthermore, optical homodyne detection is used to eavesdrop on the quantum key in quantum cryptography Hirano et al. (2000).
Transmission and accurate detection of squeezed states of light will play a central role in the future quantum internet, where quantum cryptography, communication and computation will coexist in an organic system. Their coherent detection has recently proven to be crucial for photonics-based quantum computing [1] , and to provide improvements in continuous variables quantum key distribution [2] [6] and quantum sensing [3] . Often when measuring a quantum state through coherent detection, the local oscillator field is transmitted along with the signal; however, in realistic long-distance optical fiber transmissions, where the needed local oscillator optical power increases exponentially with the distance, the system’s performance deteriorates due to nonlinear Brillouin scattering, and wavelength multiplexing schemes may be needed to avoid the issue. Moreover, transmitting a local oscillator opens security loopholes in quantum key distribution systems, where an eavesdropper can defy the security assessment from the trusted parties by gaining control over the local oscillator [4] . It is therefore very important to design coherent detection schemes that make use of independent local oscillators. We demonstrate the transmission single-mode squeezed light at 1550 nm wavelength through single-mode optical fibers (10 m and 10 km lengths) and its homodyne detection, using an independent local oscillator and a real-time phase-control system. Fig. 1a depicts the implemented physical setup: 1550 nm squeezed light is generated through spontaneous parametric downconversion [5] , couples into a single-mode optical fiber and propagates towards the homodyne detector for quadrature measurement. Real-time phase control consists in detecting the interference between a 40 MHz single-sideband pilot mode -phase-locked to the downconverted pump- and the local oscillator, estimating their instantaneous phase difference and implementing a fast and broad FPGA-based phase control on the local oscillator. As shown in Fig. 1b and 1c, with the presented scheme it was possible to steadily measure up to 3.6 dB of squeezing after a 10 m optical fiber transmission, and up to 1.5 dB of squeezing after a 10 km fiber transmission, with similar performance in terms of phase error and control stability. The presented system is simple, robust and cost-effective, and it will represent a standard class of techniques to detect not only squeezed states of light, but any arbitrary quantum state of light, including Schrödinger cat states, highly useful in quantum computation and error correction.