Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2210.00626 · IEEE Transactions on Applied Superconductivity

The Effect of Complex Dispersion and Characteristic Impedance on the Gain of Superconducting Traveling-Wave Kinetic Inductance Parametric Amplifiers

Javier Carrasco, Daniel Valenzuela, Claudio Falcón, Ricardo Finger, Fausto Patricio Mena

Published Feb 9, 2023• 2 citations
arXivHTMLPDF

Abstract

Superconducting traveling-wave parametric amplifiers are a promising amplification technology suitable for applications in submillimeter astronomy. Their implementation relies on the use of Floquet transmission lines in order to create strong stopbands to suppress undesired harmonics. In the design process, amplitude equations are used to predict their gain, operation frequency, and bandwidth. However, usual amplitude equations do not take into account the real and imaginary parts of the dispersion and characteristic impedance that results from the use of Floquet lines, hindering reliable design. In order to overcome this limitation, we have used the multiple-scale method to include those effects. We demonstrate that complex dispersion and characteristic impedance have a stark effect on the transmission line's gain, even suppressing it completely in certain cases. The equations presented here can, thus, guide to a better design and understanding of the properties of this kind of amplifier.

DOI
10.1109/tasc.2023.3243464

Related papers

Modeling and Testing Superconducting Artificial CPW Lines Suitable for Parametric Amplification

Fausto Patricio Mena, D. Valenzuela, C. Espinoza +5 more

Achieving amplification with high gain and quantum-limited noise is a difficult problem to solve. Parametric amplification using a superconducting transmission line with high kinetic inductance is a promising technology not only to solve this problem but also adding several benefits. Compared to other technologies, they have the potential to improve power saturation, achieve larger fractional bandwidths, and operate at higher frequencies. In this type of amplifier, the selection of the proper transmission line is a key element in its design. Given current fabrication limitations, traditional lines such as coplanar waveguides (CPW), are not ideal for this purpose, since it is difficult to make them with the proper characteristic impedance for good matching and slow enough phase velocity for making them more compact. Capacitively loaded lines, also known as artificial lines, are a good solution to this problem. However, few design rules or models have been presented to guide their accurate design. This fact is even more crucial considering that they are usually fabricated in the form of Floquet lines that have to be designed carefully to suppress undesired harmonics appearing in the parametric process. In this article we present, first, a new modeling strategy, based on the use of electromagnetic-simulation software, and, second, a first-principles model that facilitate and speed the design of CPW artificial lines and of Floquet lines made out of them. Then, we present comparisons with experimental results that demonstrate their accuracy. Finally, the theoretical model allows one to predict the high-frequency behavior of the artificial lines, showing that they are good candidates for implementing parametric amplifiers above 100 GHz.

arXiv:2310.15344•IEEE Transactions on Applied Superconductivity•May 1, 2024•1 citation

A dispersion-engineered Josephson travelling wave parametric amplifier with periodic impedance perturbation

K Ratter, B-K Tan

We present a new approach to develop a Josephson Junction Travelling Wave Parametric Amplifier (JTWPA) that could potentially minimise the gain-ripple effect. Our design consists of a 50 Ω superconducting niobium coplanar waveguide (CPW) periodically loaded with series of Josephson junctions (JJs) to provide the non-linearity required for wave mixing. The embedded JJs alter the characteristic impedance of the transmission line abruptly, therefore creating the stopbands in the transmission (S21) for the suppression of higher harmonics and provide the means for dispersion engineering required to achieve exponential gain. The simulated gain profile of the amplifier shows that we can obtain a minimum of 15 dB gain from 4–12 GHz, close to a 100% bandwidth performance. More importantly, the characteristic impedance of the main linear transmission line remains unaffected by the strong pump, therefore ensuring the TWPA remains impedance matched to the input and output ports. This can reduce the unwanted gain undulation that inflict the optimal performance of the TWPA.

•Jan 1, 2021•0 citations

Superconducting microwave parametric amplifier based on a quasi-fractal slow propagation line

A. A. Adamyan, Sebastian E. de Graaf, Sergey Kubatkin +1 more

Quantum limited amplifiers are sought after for a wide range of applications within quantum technologies and sensing. One promising candidate is the travelling wave parametric amplifier which exploits the non-linear kinetic inductance of a superconducting transmission line. This type of microwave amplifier promises to deliver a high gain, a quantum limited noise performance over several GHz bandwidth, and a high dynamic range. However, practical realizations of this type of device have so far been limited by fabrication defects, since the length of the superconducting transmission line required for achieving substantial parametric gain is on the order of ∼1 m. Here, we report on a design for a microwave traveling wave amplifier based on a slow propagation line comprising a central strip with high kinetic inductance and quasi-fractal line-to-ground capacitors. Due to an enhanced per unit length inductance (73 nH cm−1) and capacitance (15 pF cm−1), the line has a microwave propagation velocity as low as 9.8 × 108 cm s−1. This translates into parametric gain up to 0.5 dB cm−1 and a total gain of 6 dB for just a ∼10 cm long transmission line. Moreover, the flexibility of the presented design allows balancing the line inductance and capacitance in order to keep the characteristic impedance close to 50 Ω and to suppress standing waves, both factors being essential in order to implement a practical parametric amplifier in the microwave domain.

Journal of Applied Physics•Feb 22, 2016•51 citations

Wideband superconducting parametric amplifiers based on kinetic inductance (Conference Presentation)

Peter K. Day, Byeong Ho Eom, Henry George LeDuc

Traveling-wave parametric amplifiers based on superconducting NbTiN films are being developed that provide gain over nearly an octave of bandwidth at microwave frequencies. The amplifiers are non-linear transmission lines, where the nonlinearity comes from the current dependence of the kinetic inductance. Amplification results from three and four-wave mixing processes, and phase matching over a wide frequency range is achieved by engineering the dispersion characteristics of the transmission line. Recent noise measurements over a wide frequency band demonstrate that the added noise of these amplifiers is close to one half photon, consistent with the quantum limit for a phase preserving amplifier. We will discuss applications of this class of amplifier to astronomical instruments.

Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI•Jul 10, 2018•1 citation

Modeling losses in microstrip traveling wave kinetic inductance parametric amplifiers using the four and three wave mixing effect

Valenzuela Henríquez, Daniel Alejandro

The performance of an amplifier is based on a high gain and a low noise. To minimize \nthe noise problem at high frequencies, the superconducting parametric amplifier has been \ndeveloped. It is a system that uses a non-linear process and a strong reference to transfer \nthe energy to the original signal and their harmonics. Two types of processes are discussed in \nthis thesis, the Four and Three-wave mixing (FWM and TWM). \nOne implementation is the travelling-wave kinetic inductance parametric amplifier (TKIPA). \nIt consists of a superconducting transmission line (TL), which uses its non-linear inductance \nto transfer the energy to the input signal. With the appropriated design, the blocking of \nundesirable harmonics to concentrate the power in the signal (and not in the harmonics) \nis possible. The first implementation of the TKIPA used a coplanar wave-guide (CPW), \nwhere impedances near 50 Ω are difficult to achieve. In this thesis, a TKIPA was designed \nusing a microstrip. A 50 Ω microstrip line is easier to obtain, circumventing the problem of \nimpedance mismatch with output electronics. \nWe have presented two designs of a TKIPA based on superconducting microstrip, supporting FWM and TWM, respectively. Simulation results show that the designs blocked \nthe undesirable frequencies, while obtaining a ≈ 50 Ω line. The losses in the device do not \ndeteriorate significantly the performance of the device.

•Jan 1, 2020•1 citation

Parametric Amplification in a Superconducting Microstrip Transmission Line

Wenlei Shan, Yutaro Sekímoto, Takashi Noguchi

Broadband parametric amplifiers (PAs), which utilize the nonlinear kinetic inductance of superconducting transmission lines, provide new access to ultimate sensing capability for radio astronomical observation and microwave quantum electronics. In this paper, the parametric amplification is investigated with a time-domain numerical method. The results present direct images of the traveling waves, which clarify the distinctively different features of the parametric gain in uniform and impedance-perturbed nonlinear transmission lines. The results indicate that the traveling-wave PAs (TWPAs) are susceptible to impedance mismatching because of the lack of isolation between the input and the output ports. In the experimental part of this paper, we tested, for the first time, microstrip TWPAs based on NbTiN. A parametric gain was observed at liquid helium temperature.

IEEE Transactions on Applied Superconductivity•Apr 21, 2016•24 citations
Superconducting traveling-wave parametric amplifiers are a promising amplification technology suitable for applications in submillimeter astronomy. Their implementation relies on the use of Floquet transmission lines in order to create strong stopbands to suppress undesired harmonics. In the design process, amplitude equations are used to predict their gain, operation frequency, and bandwidth. However, usual amplitude equations do not take into account the real and imaginary parts of the dispersion and characteristic impedance that results from the use of Floquet lines, hindering reliable design. In order to overcome this limitation, we have used the multiple-scale method to include those effects. We demonstrate that complex dispersion and characteristic impedance have a stark effect on the transmission line's gain, even suppressing it completely in certain cases. The equations presented here can, thus, guide to a better design and understanding of the properties of this kind of amplifier.
Achieving amplification with high gain and quantum-limited noise is a difficult problem to solve. Parametric amplification using a superconducting transmission line with high kinetic inductance is a promising technology not only to solve this problem but also adding several benefits. Compared to other technologies, they have the potential to improve power saturation, achieve larger fractional bandwidths, and operate at higher frequencies. In this type of amplifier, the selection of the proper transmission line is a key element in its design. Given current fabrication limitations, traditional lines such as coplanar waveguides (CPW), are not ideal for this purpose, since it is difficult to make them with the proper characteristic impedance for good matching and slow enough phase velocity for making them more compact. Capacitively loaded lines, also known as artificial lines, are a good solution to this problem. However, few design rules or models have been presented to guide their accurate design. This fact is even more crucial considering that they are usually fabricated in the form of Floquet lines that have to be designed carefully to suppress undesired harmonics appearing in the parametric process. In this article we present, first, a new modeling strategy, based on the use of electromagnetic-simulation software, and, second, a first-principles model that facilitate and speed the design of CPW artificial lines and of Floquet lines made out of them. Then, we present comparisons with experimental results that demonstrate their accuracy. Finally, the theoretical model allows one to predict the high-frequency behavior of the artificial lines, showing that they are good candidates for implementing parametric amplifiers above 100 GHz.
We present a new approach to develop a Josephson Junction Travelling Wave Parametric Amplifier (JTWPA) that could potentially minimise the gain-ripple effect. Our design consists of a 50 Ω superconducting niobium coplanar waveguide (CPW) periodically loaded with series of Josephson junctions (JJs) to provide the non-linearity required for wave mixing. The embedded JJs alter the characteristic impedance of the transmission line abruptly, therefore creating the stopbands in the transmission (S21) for the suppression of higher harmonics and provide the means for dispersion engineering required to achieve exponential gain. The simulated gain profile of the amplifier shows that we can obtain a minimum of 15 dB gain from 4–12 GHz, close to a 100% bandwidth performance. More importantly, the characteristic impedance of the main linear transmission line remains unaffected by the strong pump, therefore ensuring the TWPA remains impedance matched to the input and output ports. This can reduce the unwanted gain undulation that inflict the optimal performance of the TWPA.
Quantum limited amplifiers are sought after for a wide range of applications within quantum technologies and sensing. One promising candidate is the travelling wave parametric amplifier which exploits the non-linear kinetic inductance of a superconducting transmission line. This type of microwave amplifier promises to deliver a high gain, a quantum limited noise performance over several GHz bandwidth, and a high dynamic range. However, practical realizations of this type of device have so far been limited by fabrication defects, since the length of the superconducting transmission line required for achieving substantial parametric gain is on the order of ∼1 m. Here, we report on a design for a microwave traveling wave amplifier based on a slow propagation line comprising a central strip with high kinetic inductance and quasi-fractal line-to-ground capacitors. Due to an enhanced per unit length inductance (73 nH cm−1) and capacitance (15 pF cm−1), the line has a microwave propagation velocity as low as 9.8 × 108 cm s−1. This translates into parametric gain up to 0.5 dB cm−1 and a total gain of 6 dB for just a ∼10 cm long transmission line. Moreover, the flexibility of the presented design allows balancing the line inductance and capacitance in order to keep the characteristic impedance close to 50 Ω and to suppress standing waves, both factors being essential in order to implement a practical parametric amplifier in the microwave domain.
Traveling-wave parametric amplifiers based on superconducting NbTiN films are being developed that provide gain over nearly an octave of bandwidth at microwave frequencies. The amplifiers are non-linear transmission lines, where the nonlinearity comes from the current dependence of the kinetic inductance. Amplification results from three and four-wave mixing processes, and phase matching over a wide frequency range is achieved by engineering the dispersion characteristics of the transmission line. Recent noise measurements over a wide frequency band demonstrate that the added noise of these amplifiers is close to one half photon, consistent with the quantum limit for a phase preserving amplifier. We will discuss applications of this class of amplifier to astronomical instruments.
The performance of an amplifier is based on a high gain and a low noise. To minimize \nthe noise problem at high frequencies, the superconducting parametric amplifier has been \ndeveloped. It is a system that uses a non-linear process and a strong reference to transfer \nthe energy to the original signal and their harmonics. Two types of processes are discussed in \nthis thesis, the Four and Three-wave mixing (FWM and TWM). \nOne implementation is the travelling-wave kinetic inductance parametric amplifier (TKIPA). \nIt consists of a superconducting transmission line (TL), which uses its non-linear inductance \nto transfer the energy to the input signal. With the appropriated design, the blocking of \nundesirable harmonics to concentrate the power in the signal (and not in the harmonics) \nis possible. The first implementation of the TKIPA used a coplanar wave-guide (CPW), \nwhere impedances near 50 Ω are difficult to achieve. In this thesis, a TKIPA was designed \nusing a microstrip. A 50 Ω microstrip line is easier to obtain, circumventing the problem of \nimpedance mismatch with output electronics. \nWe have presented two designs of a TKIPA based on superconducting microstrip, supporting FWM and TWM, respectively. Simulation results show that the designs blocked \nthe undesirable frequencies, while obtaining a ≈ 50 Ω line. The losses in the device do not \ndeteriorate significantly the performance of the device.
Broadband parametric amplifiers (PAs), which utilize the nonlinear kinetic inductance of superconducting transmission lines, provide new access to ultimate sensing capability for radio astronomical observation and microwave quantum electronics. In this paper, the parametric amplification is investigated with a time-domain numerical method. The results present direct images of the traveling waves, which clarify the distinctively different features of the parametric gain in uniform and impedance-perturbed nonlinear transmission lines. The results indicate that the traveling-wave PAs (TWPAs) are susceptible to impedance mismatching because of the lack of isolation between the input and the output ports. In the experimental part of this paper, we tested, for the first time, microstrip TWPAs based on NbTiN. A parametric gain was observed at liquid helium temperature.