Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Novel protocols for entanglement characterization and protection

Francesco Atzori

Published Feb 20, 2026• 0 citations
OpenAlex

Abstract

Measurements are a fundamental cornerstone of physics, and in quantum science they play a uniquely central role from both foundational and technological perspectives.It is through measurements that we interact with nature: the way we probe a system determines which properties become accessible, and how they can subsequently be exploited.In quantum mechanics (QM), a measurement is not merely a passive readout of a pre-existing property; it is an active process that, through unavoidable back-action, can shape the very phenomena observed and change the state of the system.From a metrological perspective, the emphasis thus shifts to how measurements are implemented and performed, so that quantum states and correlations can be characterized, verified, and ultimately exploited in ways that are both minimally invasive and practically useful across platforms and networked scenarios.In this work, we take this need as our guiding objective: to turn the study of quantum measurements and resources into concrete, reproducible methods enabling access, characterization and protection of quantum states under realistic conditions.After a brief introduction on QM and related quantum technologies (Chapter 1), Chapter 2 presents a weak measurement (WM) scheme to perform multiple noncommuting measurements on entangled systems without altering their state, a task usually forbidden by the traditional quantum measurement paradigms.A WM is a low-intensity interaction between a quantum system and a measuring device, allowing to extract limited information while keeping the state largely intact.We exploit this property of WMs to realize the first estimation of the entire Bell parameter on a single entangled-photon pair, a task intrinsically forbidden in traditional (projective) quantum measurement frameworks, opening new paths in the field of quantum state estimation.Then, with the same method, we perform the first experimental test of the recently-introduced Relativistic Independence principle, showing how the measurement choice can limit the access to local and nonlocal correlations, demonstrating an interplay and balance between the two.Moreover, we illustrate that, with this scheme, one can access the outcome probabilities for the full set of observables in a Bell test, showing that some probabilities can become intrinsically negative.These works defy traditional, textbook QM paradigms, showing that quantum correlations can be estimated almost

Related papers

Experimental Test of Nonlocality Limits from Relativistic Independence

Francesco Atzori, Salvatore Virzì, Enrico Rebufello +9 more

Quantum correlations, like entanglement, represent the characteristic trait of quantum mechanics and pose essential issues and challenges to the interpretation of this pillar of modern physics. Although quantum correlations are largely acknowledged as a major resource to achieve quantum advantage in many tasks of quantum technologies, their full quantitative description and the axiomatic basis underlying them are still under investigation. Previous works have suggested that the origin of nonlocal correlations is grounded in principles capturing (from outside the quantum formalism) the essence of quantum uncertainty. In particular, the recently introduced principle of relativistic independence has given rise to a new bound intertwining local and nonlocal correlations. Here, we test such a bound by realizing together sequential and joint weak measurements on entangled photon pairs, allowing us to simultaneously quantify both local and nonlocal correlations by measuring incompatible observables on the same quantum system without collapsing its state, a task typically forbidden in the traditional (projective) quantum measurement framework. Our results demonstrate the existence of a fundamental limit on the extent of quantum correlations, shedding light on the profound role of uncertainty in both enabling and balancing them. Published by the American Physical Society 2024

arXiv:2501.06385•PRX Quantum•Dec 30, 2024•10 citations

Weak measurements: From measuring incompatible observables and testing quantum contextuality to protective measurements

Fabrizio Piacentini, Alessio Avella, Rudi Lussana +9 more

Summary form only given. Measurements are the very basis of Physics, especially in Quantum Mechanics, where they assume even a more fundamental role because of wave function collapse after a “strong” (projective) measurement. Furthermore, measuring a quantum-mechanical observable completely erases the information on its conjugate one (e.g. measurement of position erases information on momentum, and vice-versa). Nevertheless, in Quantum Mechanics other kinds of measurement are possible. For example, wave function collapse can be overcome through Weak Measurements, i.e. measurements performed with an interaction sufficiently weak not to collapse the original state, featuring several interesting properties. An example of these are weak values [1-3], realised for the first time in [4-6], that have been used for addressing fundamental questions [7-12] as Contextuality and are also a tool for Quantum Metrology [13-19]. One of the most intriguing properties of Weak Measurements is that, since they are not affected by wave function collapse, they can allow gathering simultaneous information on non-commuting observables [20], impossible with the standard (projective) measurement protocols. A second example is offered by Protective Measurements [21], a new technique able to extract information on the expectation value of an observable even measuring a single particle. In this talk, after a general introduction to WMs, we present the first realisation of sequential weak value measurements [22], i.e. a joint measurement of the weak value of (incompatible) polarizations on a single photon. Then, we present an experiment addressed to explore the connection between anomalous weak values and Contextuality [23], showing a clear violation of the inequality proposed in [12] while satisfying all the additional theoretical requests, unequivocally demonstrating the contextual nature of weak values. Finally, we present and discuss the first implementation of Protective Measurements, showing unprecedented measurement capability and demonstrating how the expectation value of an observable can be obtained with a single measurement on a single particle.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2017•0 citations

Entanglement-preserving measurement of the Bell parameter on a single entangled pair

Salvatore Virzì, Enrico Rebufello, Francesco Atzori +10 more

Abstract Bell inequalities represent one of the cornerstones of quantum foundations, and a fundamental tool for quantum technologies. Although a lot of effort was put in exploring and generalizing them, because of the wave function collapse it was deemed impossible to estimate the entire Bell parameter from one entangled pair, since this would involve measuring incompatible observables on the same quantum state. Conversely, here it is reported the first implementation of a new generation of Bell inequality tests, able to extract a Bell parameter value from each entangled pair and, at the same time, preserve the pair entanglement instead of destroying it. This is obtained by exploiting sequences of weak measurements, allowing incompatible observable measurements on a quantum state without collapsing its wave function. On the fundamental side, by removing the need to choose between different measurement bases our approach stretches the concept of counterfactual definiteness, since it allows measuring the entangled pair in all the bases needed for the Bell inequality test, intrinsically eliminating the issues connected with the otherwise not-chosen bases. On the practical side, after our Bell parameter measurement the entanglement within the pair remains (basically) unaltered, hence exploitable for other quantum-technology-related or foundational purposes.

arXiv:2303.04787•Quantum Science and Technology•Aug 1, 2024•24 citations

Quantum correlations in information theory

Davide Girolami

The project concerned the study of quantum correlations (QC) in compound systems, i.e. statistical correlations more general than entanglement which are predicted by quantum mechanics but not described in any classical scenario. I aimed to understand the technical and operational properties of the measures of QC, their interplay with entanglement quantifiers and the experimental accessibility.\nIn the first part of my research path, after having acquired the conceptual and technical rudiments of the project, I provided solutions for some computational issues: I developed analytical and numerical algorithms for calculating bipartite QC in finite dimensional systems. Then, I tackled the problem of the experimental detection of QC. There is no Hermitian operator associated with entanglement measures, nor with QC ones. However, the information encoded in a density matrix is redundant to quantify them, thus the full knowledge of the state is not required to accomplish the task. I reported the first protocol to measure the QC of an unknown state by means of a limited number of measurements, without performing the tomography of the state. My proposal has been implemented experimentally in a NMR (Nuclear Magnetic Resonance) setting.\nIn the final stage of the project, I explored the foundational and operational merits of QC. I showed that the QC shared by two subsystems yield a genuinely quantum kind of uncertainty on single local observables. The result is a promising evidence of the potential exploitability of separable (unentangled) states for quantum metrology in noisy conditions.

•Jul 10, 2013•0 citations

Revealing entanglement and nonlocality in few photon states

Valentina Caprara Vivoli

In the past two decades, the union of quantum mechanics and information science has led to significant progress in our understanding of the quantum world and in our ability to coherently control individual quantum systems. New technologies have appeared, and some of them, such as quantum key distribution (QKD), are now commercially available. We are now envisioning quantum networks that could allow us to communicate over intercontinental scales, as the internet does, but with a provable security. An open question in this framework is how to certify that a given quantum network performs well, i.e. how to detect entanglement between 2, 5, 10 or 100 nodes located far away from each other. Bell tests are appealing for such a task as they allow one to certify the presence of entanglement deviceindependently, i.e. without assumptions on the Hilbert space dimension or on the proper alignment of the measurement devices. In the first chapter, I start by examining in depth the most standard approach to perform a Bell test in which a source based on spontaneous parametric down conversion (SPDC) is used to create photon pairs entangled in polarization. I show, in particular, that in this case the Bell inequality violation is fundamentally limited by vacuum and multi-photon emissions. In the second part of this thesis, I show how to overcome this limitation by using the SPDC source to create single photon entanglement, i.e. entanglement between two paths sharing a single photon, or two-mode squeezed states. Here, the non local content of the states is revealed using photon counting techniques preceded by small displacements in phase space. In the third part, I show how these measurements can be used for an optomechanical Bell test. This opens the way for device-independent quantum information processing with optomechanical systems and might be relevant to test collapse models in a theory independent manner. In the fourth chapter, the same measurements are used to build up a witness that can reveal genuine path entanglement. This witness has triggered an experiment which highlights its potential for network certification. I conclude the thesis by showing how path entanglement can be revealed with the human eye by exploiting these displacement operations.

•Jan 1, 2015•1 citation

Measurements in Quantum Optics

U. Schilling

This thesis fathoms the possibilities and limitations of measurements in quantum optics. After a short introduction to the general aspects of measurements in quantum mechanics, it presents three examples of a measurement process in concrete applications to quantum optics. For one, while operators describing quantities of interest might have a simple theoretical form, it is often hard to actually implement a measurement of their expectation values experimentally. This situation is encountered in the first part which is devoted to the measurement of quantum statistical properties of a light beam. In contrast to classical optics, these statistics are not fully determined by first- and second-order correlations. Instead, higher-order correlations, usually described by non-Hermitian operators, are necessary to characterize the quantum state completely. A particular example is the N-photon Fock state, for which only a measurement of the Nth-order correlations allows for a full characterization. Here, we present a new method how to measure an important class of Nth-order correlations for arbitrary N in a single spatial mode with two polarizations with limited experimental resources. The second part is again centered around the realization of specific measurement operators for photon correlation measurements. However, in contrast to the previous chapter, these measurements are not an end in their own, but are designed to create specific quantum states as a consequence of the measurement process: A suitable measurement of photons emitted by a number of atoms allows to transfer the atoms into long-lived entangled states. We find that with this method it is possible to entangle two remote atomic qubits to an arbitrary and well-defined degree. Furthermore, we show how to generate two families of quantum states in an arbitrary number of remote atomic qubits: one family consists of all -- symmetric and non-symmetric -- total angular momentum eigenstates in N remote qubits, the other is a family of cluster states. It is also systematically investigated whether the technique of quantum state engineering by projective measurements allows for the creation of any arbitrary state. We find explicit solutions for the case of two and three qubits, while it is shown that no solution exist for N > 6. We conclude the section by proving that with some changes in the setup, this measurement-based quantum state engineering technique allows to create the same states among the scattered photons themselves rather than among the emitting atoms. The last part is devoted to the amount of information one is able to gain about a given system when performing a measurement. The corresponding limits of information are investigated at the example of the duality that arises in a two-way interferometer between the visibility of the interference pattern and the knowledge about the path of the interfering object. We show that there exist correlations between the phase difference the interfering object acquires on its way through the interferometer and the amount of which-way information retrievable from certain observables of the which-way detector. In this way, the which-way information becomes a phase-dependent quantity. In particular, we find that for certain values of the phase shift, the amount of extractable which-way information can be larger than allowed by phase-independent measurement. This property is put to use to find the optimal observable for the which-way detector readout in dependence on the phase of the interfering object. Following this strategy, we are able to gain more which-way information than previously thought possible.

•Oct 24, 2011•0 citations
Measurements are a fundamental cornerstone of physics, and in quantum science they play a uniquely central role from both foundational and technological perspectives.It is through measurements that we interact with nature: the way we probe a system determines which properties become accessible, and how they can subsequently be exploited.In quantum mechanics (QM), a measurement is not merely a passive readout of a pre-existing property; it is an active process that, through unavoidable back-action, can shape the very phenomena observed and change the state of the system.From a metrological perspective, the emphasis thus shifts to how measurements are implemented and performed, so that quantum states and correlations can be characterized, verified, and ultimately exploited in ways that are both minimally invasive and practically useful across platforms and networked scenarios.In this work, we take this need as our guiding objective: to turn the study of quantum measurements and resources into concrete, reproducible methods enabling access, characterization and protection of quantum states under realistic conditions.After a brief introduction on QM and related quantum technologies (Chapter 1), Chapter 2 presents a weak measurement (WM) scheme to perform multiple noncommuting measurements on entangled systems without altering their state, a task usually forbidden by the traditional quantum measurement paradigms.A WM is a low-intensity interaction between a quantum system and a measuring device, allowing to extract limited information while keeping the state largely intact.We exploit this property of WMs to realize the first estimation of the entire Bell parameter on a single entangled-photon pair, a task intrinsically forbidden in traditional (projective) quantum measurement frameworks, opening new paths in the field of quantum state estimation.Then, with the same method, we perform the first experimental test of the recently-introduced Relativistic Independence principle, showing how the measurement choice can limit the access to local and nonlocal correlations, demonstrating an interplay and balance between the two.Moreover, we illustrate that, with this scheme, one can access the outcome probabilities for the full set of observables in a Bell test, showing that some probabilities can become intrinsically negative.These works defy traditional, textbook QM paradigms, showing that quantum correlations can be estimated almost
Quantum correlations, like entanglement, represent the characteristic trait of quantum mechanics and pose essential issues and challenges to the interpretation of this pillar of modern physics. Although quantum correlations are largely acknowledged as a major resource to achieve quantum advantage in many tasks of quantum technologies, their full quantitative description and the axiomatic basis underlying them are still under investigation. Previous works have suggested that the origin of nonlocal correlations is grounded in principles capturing (from outside the quantum formalism) the essence of quantum uncertainty. In particular, the recently introduced principle of relativistic independence has given rise to a new bound intertwining local and nonlocal correlations. Here, we test such a bound by realizing together sequential and joint weak measurements on entangled photon pairs, allowing us to simultaneously quantify both local and nonlocal correlations by measuring incompatible observables on the same quantum system without collapsing its state, a task typically forbidden in the traditional (projective) quantum measurement framework. Our results demonstrate the existence of a fundamental limit on the extent of quantum correlations, shedding light on the profound role of uncertainty in both enabling and balancing them. Published by the American Physical Society 2024
Summary form only given. Measurements are the very basis of Physics, especially in Quantum Mechanics, where they assume even a more fundamental role because of wave function collapse after a “strong” (projective) measurement. Furthermore, measuring a quantum-mechanical observable completely erases the information on its conjugate one (e.g. measurement of position erases information on momentum, and vice-versa). Nevertheless, in Quantum Mechanics other kinds of measurement are possible. For example, wave function collapse can be overcome through Weak Measurements, i.e. measurements performed with an interaction sufficiently weak not to collapse the original state, featuring several interesting properties. An example of these are weak values [1-3], realised for the first time in [4-6], that have been used for addressing fundamental questions [7-12] as Contextuality and are also a tool for Quantum Metrology [13-19]. One of the most intriguing properties of Weak Measurements is that, since they are not affected by wave function collapse, they can allow gathering simultaneous information on non-commuting observables [20], impossible with the standard (projective) measurement protocols. A second example is offered by Protective Measurements [21], a new technique able to extract information on the expectation value of an observable even measuring a single particle. In this talk, after a general introduction to WMs, we present the first realisation of sequential weak value measurements [22], i.e. a joint measurement of the weak value of (incompatible) polarizations on a single photon. Then, we present an experiment addressed to explore the connection between anomalous weak values and Contextuality [23], showing a clear violation of the inequality proposed in [12] while satisfying all the additional theoretical requests, unequivocally demonstrating the contextual nature of weak values. Finally, we present and discuss the first implementation of Protective Measurements, showing unprecedented measurement capability and demonstrating how the expectation value of an observable can be obtained with a single measurement on a single particle.
Abstract Bell inequalities represent one of the cornerstones of quantum foundations, and a fundamental tool for quantum technologies. Although a lot of effort was put in exploring and generalizing them, because of the wave function collapse it was deemed impossible to estimate the entire Bell parameter from one entangled pair, since this would involve measuring incompatible observables on the same quantum state. Conversely, here it is reported the first implementation of a new generation of Bell inequality tests, able to extract a Bell parameter value from each entangled pair and, at the same time, preserve the pair entanglement instead of destroying it. This is obtained by exploiting sequences of weak measurements, allowing incompatible observable measurements on a quantum state without collapsing its wave function. On the fundamental side, by removing the need to choose between different measurement bases our approach stretches the concept of counterfactual definiteness, since it allows measuring the entangled pair in all the bases needed for the Bell inequality test, intrinsically eliminating the issues connected with the otherwise not-chosen bases. On the practical side, after our Bell parameter measurement the entanglement within the pair remains (basically) unaltered, hence exploitable for other quantum-technology-related or foundational purposes.
The project concerned the study of quantum correlations (QC) in compound systems, i.e. statistical correlations more general than entanglement which are predicted by quantum mechanics but not described in any classical scenario. I aimed to understand the technical and operational properties of the measures of QC, their interplay with entanglement quantifiers and the experimental accessibility.\nIn the first part of my research path, after having acquired the conceptual and technical rudiments of the project, I provided solutions for some computational issues: I developed analytical and numerical algorithms for calculating bipartite QC in finite dimensional systems. Then, I tackled the problem of the experimental detection of QC. There is no Hermitian operator associated with entanglement measures, nor with QC ones. However, the information encoded in a density matrix is redundant to quantify them, thus the full knowledge of the state is not required to accomplish the task. I reported the first protocol to measure the QC of an unknown state by means of a limited number of measurements, without performing the tomography of the state. My proposal has been implemented experimentally in a NMR (Nuclear Magnetic Resonance) setting.\nIn the final stage of the project, I explored the foundational and operational merits of QC. I showed that the QC shared by two subsystems yield a genuinely quantum kind of uncertainty on single local observables. The result is a promising evidence of the potential exploitability of separable (unentangled) states for quantum metrology in noisy conditions.
In the past two decades, the union of quantum mechanics and information science has led to significant progress in our understanding of the quantum world and in our ability to coherently control individual quantum systems. New technologies have appeared, and some of them, such as quantum key distribution (QKD), are now commercially available. We are now envisioning quantum networks that could allow us to communicate over intercontinental scales, as the internet does, but with a provable security. An open question in this framework is how to certify that a given quantum network performs well, i.e. how to detect entanglement between 2, 5, 10 or 100 nodes located far away from each other. Bell tests are appealing for such a task as they allow one to certify the presence of entanglement deviceindependently, i.e. without assumptions on the Hilbert space dimension or on the proper alignment of the measurement devices. In the first chapter, I start by examining in depth the most standard approach to perform a Bell test in which a source based on spontaneous parametric down conversion (SPDC) is used to create photon pairs entangled in polarization. I show, in particular, that in this case the Bell inequality violation is fundamentally limited by vacuum and multi-photon emissions. In the second part of this thesis, I show how to overcome this limitation by using the SPDC source to create single photon entanglement, i.e. entanglement between two paths sharing a single photon, or two-mode squeezed states. Here, the non local content of the states is revealed using photon counting techniques preceded by small displacements in phase space. In the third part, I show how these measurements can be used for an optomechanical Bell test. This opens the way for device-independent quantum information processing with optomechanical systems and might be relevant to test collapse models in a theory independent manner. In the fourth chapter, the same measurements are used to build up a witness that can reveal genuine path entanglement. This witness has triggered an experiment which highlights its potential for network certification. I conclude the thesis by showing how path entanglement can be revealed with the human eye by exploiting these displacement operations.
This thesis fathoms the possibilities and limitations of measurements in quantum optics. After a short introduction to the general aspects of measurements in quantum mechanics, it presents three examples of a measurement process in concrete applications to quantum optics. For one, while operators describing quantities of interest might have a simple theoretical form, it is often hard to actually implement a measurement of their expectation values experimentally. This situation is encountered in the first part which is devoted to the measurement of quantum statistical properties of a light beam. In contrast to classical optics, these statistics are not fully determined by first- and second-order correlations. Instead, higher-order correlations, usually described by non-Hermitian operators, are necessary to characterize the quantum state completely. A particular example is the N-photon Fock state, for which only a measurement of the Nth-order correlations allows for a full characterization. Here, we present a new method how to measure an important class of Nth-order correlations for arbitrary N in a single spatial mode with two polarizations with limited experimental resources. The second part is again centered around the realization of specific measurement operators for photon correlation measurements. However, in contrast to the previous chapter, these measurements are not an end in their own, but are designed to create specific quantum states as a consequence of the measurement process: A suitable measurement of photons emitted by a number of atoms allows to transfer the atoms into long-lived entangled states. We find that with this method it is possible to entangle two remote atomic qubits to an arbitrary and well-defined degree. Furthermore, we show how to generate two families of quantum states in an arbitrary number of remote atomic qubits: one family consists of all -- symmetric and non-symmetric -- total angular momentum eigenstates in N remote qubits, the other is a family of cluster states. It is also systematically investigated whether the technique of quantum state engineering by projective measurements allows for the creation of any arbitrary state. We find explicit solutions for the case of two and three qubits, while it is shown that no solution exist for N > 6. We conclude the section by proving that with some changes in the setup, this measurement-based quantum state engineering technique allows to create the same states among the scattered photons themselves rather than among the emitting atoms. The last part is devoted to the amount of information one is able to gain about a given system when performing a measurement. The corresponding limits of information are investigated at the example of the duality that arises in a two-way interferometer between the visibility of the interference pattern and the knowledge about the path of the interfering object. We show that there exist correlations between the phase difference the interfering object acquires on its way through the interferometer and the amount of which-way information retrievable from certain observables of the which-way detector. In this way, the which-way information becomes a phase-dependent quantity. In particular, we find that for certain values of the phase shift, the amount of extractable which-way information can be larger than allowed by phase-independent measurement. This property is put to use to find the optimal observable for the which-way detector readout in dependence on the phase of the interfering object. Following this strategy, we are able to gain more which-way information than previously thought possible.