Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2208.05044 · 2D Materials

Two-dimensional cuprate nanodetector with single telecom photon sensitivity at T = 20 K

Rafael Luque Merino, Paul Seifert, José Ramón Durán Retamal, Roop K. Mech, Takashi Taniguchi, Kenji Watanabe, Kazuo Kadowaki, Robert H. Hadfield, Dmitri K. Efetov

Published Jan 19, 2023• 49 citations
arXivHTMLPDF

Abstract

Abstract Detecting light at the single-photon level is one of the pillars of emergent photonic technologies. This is realized through state-of-the-art superconducting detectors that offer efficient, broadband and fast response. However, the use of low T C superconducting thin films limits their operation temperature to approximately 4 K and below. Here, we demonstrate proof-of-concept nanodetectors based on exfoliated, two-dimensional cuprate superconductor Bi2Sr2CaCu2O8-δ that exhibit single-photon sensitivity at telecom wavelength at a record temperature of T = 20 K. These non-optimized devices exhibit a slow ∼ m s reset time and a low detection efficiency ( ∼ 10 − 4 ). We realize the elusive prospect of single-photon sensitivity on a high-T C nanodetector thanks to a novel approach, combining van der Waals fabrication techniques and a non-invasive nanopatterning based on light ion irradiation. This result paves the way for broader application of single-photon technologies, relaxing the cryogenic constraints for single-photon detection at telecom wavelength.

DOI
10.1088/2053-1583/acb4a8

Related papers

A high- T c van der Waals superconductor based photodetector with ultra-high responsivity and nanosecond relaxation time

Paul Seifert, José Ramón Durán Retamal, Rafael Luque Merino +9 more

Abstract Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and radio-astronomy. However, their broader use is held back by the low operation temperatures which require expensive cryostats. Here, we demonstrate a high- T c superconducting photodetector, which shows orders of magnitude improved performance characteristics of any superconducting detector operated above 77 K, with a responsivity of 9.61 × 10 4 V W −1 , theoretically achievable noise equivalent power of 15.9 fW Hz 1/2 and nanosecond relaxation times. At 15 K the detector reaches an ultra-high performance of 2.33 × 10 7 V W −1 and 55.2 aW Hz 1/2 . It is based on van der Waals heterostructures of the high temperature superconductor Bi 2 Sr 2 CaCu 2 O 8+ δ , which are shaped into nano-wires with ultra-small form factor using focused helium ion beam irradiation. To highlight the versatility of the detector we demonstrate its fabrication and operation on a telecom grade SiN waveguide chip. Our detector significantly relaxes the demands of practical applications of superconducting detectors and displays its possible potential for photonics based quantum applications.

arXiv:2006.03130•2D Materials•Jun 2, 2021•19 citations

Superconducting single photon detectors for ultrasensitive visible and IR detection

R. Espiau de Lamaëstre, L. Maingault, Laurent Frey +5 more

Superconducting single photons detectors (SSPDs) have emerged in recent years as a promising alternative for fast and sensitive infrared detectors working in the photon counting mode. In particular, those detectors combine very low dark count rates (below 1 Hz), high speed (above 1GHz), photon number resolution and reasonable quantum efficiency (10 % at telecom wavelengths). They already found applications in quantum cryptography systems and integrated circuit failure analysis, but could also be used as ultimate sensors in matrix configurations. We show here the optimization of SSPD fabrication and their optical metrology at CEA. SSPD are fabricated by patterning a 80 nm wide nanowire in a very thin (4 nm) NbN film on sapphire, forming a pixel of several microns size. A cryogenic all-fibered optoelectronic system has been developed and allows precise metrology of the optical performances of SSPD. When biasing near the critical current of the nanowire, we demonstrate a detection quantum efficiency of 8 % at 1.55 μm, which is also found to be strongly polarization dependent. This quantum efficiency being limited by optical absorption, we propose a prism coupling based absorption enhancing structure that allows reaching 100 % quantum efficiency.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 22, 2009•4 citations

Superconducting nanowire single-photon detector implemented in a 2D photonic crystal cavity

Julian Münzberg, Andreas Vetter, Fabian Beutel +4 more

The combination of efficient single-photon generation, manipulation, and detection on a single chip poses a major challenge for quantum photonics and all-optical quantum computing. Among a multitude of detection technologies, waveguide-integrated superconducting nanowire single-photon detectors stand out as they promise near-unity detection efficiencies at outstanding timing accuracy and speed. Here, by exploiting the concept of critical coupling, we present the integration of a short nanowire into a two-dimensional double heterostructure photonic crystal cavity to realize an integrated single-photon detector with excellent performance metric. The complete detector characterization reveals on-chip detection efficiencies of almost 70% at telecom wavelengths, recovery times of 480 ps, and vanishingly low dark count rates. Our design paves the way for the implementation of compact on-chip detector arrays and time-multiplexed single-detector schemes.

Optica•May 16, 2018•81 citations

Single-photon detection in few-layer NbSe2 superconducting nanowires

Lucio Zugliani, Alessandro Palermo, Bianca Scaparra +11 more

Abstract Superconducting Nanowire Single-Photon Detectors (SNSPDs) are key building blocks for photonic quantum technologies due to their ability to detect single photons with ultra-high efficiency, low dark counts and fast temporal resolution. Superconducting materials exhibiting high uniformity, large absorption cross-section and atomic-scale thickness are desirable to extend single-photon detection from the near-infrared up to the terahertz regime, where existing material choices are especially constrained. Substrate independence would further open the way to integrating detectors onto functional materials and heterostructures, enhancing performance and enabling proximal readout of a wide range of individual excitations. Here, we pattern the prototypical two-dimensional superconductor niobium diselenide (NbSe 2 ) into few-layer nanowires less than 100 nm wide and demonstrate single-photon detection at 780 nm and 1550 nm. At the same time, the dark-count rate remains below 1 Hz up to the switching current and we achieve a timing jitter below 50 ps. We estimate via a diffusive hot-spot model that materials and geometric parameters would allow a theoretical cut-off wavelength in the millimetre range, assuming state-of-the-art device parameters. Our results open up routes toward quantum-limited detectors integrated into quantum-photonic circuits and quantum devices, with the potential for novel detection capabilities and unprecedented energy sensitivity.

arXiv:2508.18843•Nature Communications•Jul 29, 2026•1 citation

Superconducting Microwires with Extended Regular Perforation Patterns

Dong Zhu

Superconducting nanowires have been used to detect single photons for more than 20 years. The basic principle is that photons can perturb superconducting Cooper pairs and thereby create a resistive hotspot, which produces a current-crowding effect. This current-crowding effect reduces the superconducting energy gap near the hotspot, which results in the nanowire changing from a superconducting to a normal state near the hotspot. The resulting high impedance causes the current to be squeezed into a high frequency coaxial wire connected in parallel with it, which finally produces a measurable voltage pulse. Thanks to the maturity of current micro- and nano- fabrication techniques, high quality superconducting thin films and nano-wires have been realized in a variety of materials such as NbN, WSi, MoSi and others. These techniques include magnetron sputtering, physical vapor deposition, electron beam lithography, optical lithography, reactive ion etching, wafer cutting, etc. Measurements of superconducting single-photon detectors require cryogenic refrigeration systems, ranging from the initial liquid helium cold tank, to modern dry dilution refrigerators. On one hand, a superconducting device needs to be cooled down below its critical temperature to work. On the other hand, photon-detection events generate hot spots, which release heat to the device substrate, which the refrigerator needs to efficiently take away. Research on superconducting nanowire single-photon detectors (SNSPDs) has made significant advancements over the past two decades, including high detection efficiency, low dark counts, and broad wavelength range capabilities. Beyond improvements in traditional NbN, WSi and MoSi superconducting nanowires, there have been numerous efforts to develop high-temperature superconducting nanowires, such as MgB2 and Bi2Sr2CaCu2O8 (BSCCO), due to the operational limitations imposed by low-temperature superconducting materials. Typically, single-photon detectors require operation temperatures below the critical temperature. High-temperature superconducting nanowire single-photon detectors have currently reported to exhibit the highest operating temperature around 20 K in BSCCO, which is much lower than its critical temperature of 80 K, showing that large-gap superconductors have a comparably low sensitivity to low-energy photons. In recent years since 2018, several groups have reported that micrometer-wide superconducting wires can also be used for single-photon detection, unlike the conventional nanometer-wide superconducting wires. In general, as long as the bias current is uniformly distributed in superconducting wires and approaches the critical Cooper pair-breaking current, the hot spots generated by photon absorption can induce vortices and anti-vortices, and their motion under the action of the Lorentz force generates resistance and voltage, which ultimately produces a normal state region. An increase of the wire width to the micron scale offers more freedom to design new detectors based on current nano- and microfabrication techniques. In this doctoral dissertation, I will first introduce the basic Ginzburg-Landau theory of superconductivity and the measurement theory of superconducting circuits related to single-photon detection. I will then provide a detailed description of the equipment construction and sample fabrication techniques used in the experiment. Finally, I will present my two main studies: in one project I examined the photon-detection performance of superconducting micro-wires with a multi-pinhole structure, the correlation between dark counts and magnetic vortices, as well as the properties of critical current in magnetic fields. In a subsequent study I conducted numerical simulations using the time dependent Ginzburg-Landau equation, to analyze the dynamics of vortices in superconducting micro-strips with regular large-area perforations by pinholes as a function of magnetic field and bias current. The thus obtained predictions were then successfully confirmed in a detailed experimental study on a series of microwires.

•Mar 17, 2026•0 citations

Two-micron-wavelength single-photon detection using the high-critical-current-bank structure superconducting wide strip photon detector

Masahiro Yabuno, Fumihiro China, Hirotaka Terai +1 more

Superconducting strip photon detector is a promising technology for achieving high detection efficiency around the 2000 nm wavelength region where exciting applications are expected in fields ranging from quantum science to atmospheric physics. However, improving the single-photon sensitivity usually requires narrower nanostrips, which necessitates advanced fabrication technologies. We demonstrate high-efficiency single-photon detection at 2000 nm using a 20-μm-wide superconducting strip, which is approximately 200 times wider than conventional nanostrips. By combining a high critical current bank (HCCB) structure that improves the wide strip's single-photon sensitivity with an optical cavity structure designed for the 2000 nm wavelength band, we realize system detection efficiency of 70% with near-unity internal detection efficiency. These results provide a high-productivity approach for high-performance single-photon detector development for the 2000 nm band.

Optics Express•May 22, 2025•7 citations
Abstract Detecting light at the single-photon level is one of the pillars of emergent photonic technologies. This is realized through state-of-the-art superconducting detectors that offer efficient, broadband and fast response. However, the use of low T C superconducting thin films limits their operation temperature to approximately 4 K and below. Here, we demonstrate proof-of-concept nanodetectors based on exfoliated, two-dimensional cuprate superconductor Bi2Sr2CaCu2O8-δ that exhibit single-photon sensitivity at telecom wavelength at a record temperature of T = 20 K. These non-optimized devices exhibit a slow ∼ m s reset time and a low detection efficiency ( ∼ 10 − 4 ). We realize the elusive prospect of single-photon sensitivity on a high-T C nanodetector thanks to a novel approach, combining van der Waals fabrication techniques and a non-invasive nanopatterning based on light ion irradiation. This result paves the way for broader application of single-photon technologies, relaxing the cryogenic constraints for single-photon detection at telecom wavelength.
Abstract Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and radio-astronomy. However, their broader use is held back by the low operation temperatures which require expensive cryostats. Here, we demonstrate a high- T c superconducting photodetector, which shows orders of magnitude improved performance characteristics of any superconducting detector operated above 77 K, with a responsivity of 9.61 × 10 4 V W −1 , theoretically achievable noise equivalent power of 15.9 fW Hz 1/2 and nanosecond relaxation times. At 15 K the detector reaches an ultra-high performance of 2.33 × 10 7 V W −1 and 55.2 aW Hz 1/2 . It is based on van der Waals heterostructures of the high temperature superconductor Bi 2 Sr 2 CaCu 2 O 8+ δ , which are shaped into nano-wires with ultra-small form factor using focused helium ion beam irradiation. To highlight the versatility of the detector we demonstrate its fabrication and operation on a telecom grade SiN waveguide chip. Our detector significantly relaxes the demands of practical applications of superconducting detectors and displays its possible potential for photonics based quantum applications.
Superconducting single photons detectors (SSPDs) have emerged in recent years as a promising alternative for fast and sensitive infrared detectors working in the photon counting mode. In particular, those detectors combine very low dark count rates (below 1 Hz), high speed (above 1GHz), photon number resolution and reasonable quantum efficiency (10 % at telecom wavelengths). They already found applications in quantum cryptography systems and integrated circuit failure analysis, but could also be used as ultimate sensors in matrix configurations. We show here the optimization of SSPD fabrication and their optical metrology at CEA. SSPD are fabricated by patterning a 80 nm wide nanowire in a very thin (4 nm) NbN film on sapphire, forming a pixel of several microns size. A cryogenic all-fibered optoelectronic system has been developed and allows precise metrology of the optical performances of SSPD. When biasing near the critical current of the nanowire, we demonstrate a detection quantum efficiency of 8 % at 1.55 μm, which is also found to be strongly polarization dependent. This quantum efficiency being limited by optical absorption, we propose a prism coupling based absorption enhancing structure that allows reaching 100 % quantum efficiency.
The combination of efficient single-photon generation, manipulation, and detection on a single chip poses a major challenge for quantum photonics and all-optical quantum computing. Among a multitude of detection technologies, waveguide-integrated superconducting nanowire single-photon detectors stand out as they promise near-unity detection efficiencies at outstanding timing accuracy and speed. Here, by exploiting the concept of critical coupling, we present the integration of a short nanowire into a two-dimensional double heterostructure photonic crystal cavity to realize an integrated single-photon detector with excellent performance metric. The complete detector characterization reveals on-chip detection efficiencies of almost 70% at telecom wavelengths, recovery times of 480 ps, and vanishingly low dark count rates. Our design paves the way for the implementation of compact on-chip detector arrays and time-multiplexed single-detector schemes.
Abstract Superconducting Nanowire Single-Photon Detectors (SNSPDs) are key building blocks for photonic quantum technologies due to their ability to detect single photons with ultra-high efficiency, low dark counts and fast temporal resolution. Superconducting materials exhibiting high uniformity, large absorption cross-section and atomic-scale thickness are desirable to extend single-photon detection from the near-infrared up to the terahertz regime, where existing material choices are especially constrained. Substrate independence would further open the way to integrating detectors onto functional materials and heterostructures, enhancing performance and enabling proximal readout of a wide range of individual excitations. Here, we pattern the prototypical two-dimensional superconductor niobium diselenide (NbSe 2 ) into few-layer nanowires less than 100 nm wide and demonstrate single-photon detection at 780 nm and 1550 nm. At the same time, the dark-count rate remains below 1 Hz up to the switching current and we achieve a timing jitter below 50 ps. We estimate via a diffusive hot-spot model that materials and geometric parameters would allow a theoretical cut-off wavelength in the millimetre range, assuming state-of-the-art device parameters. Our results open up routes toward quantum-limited detectors integrated into quantum-photonic circuits and quantum devices, with the potential for novel detection capabilities and unprecedented energy sensitivity.
Superconducting nanowires have been used to detect single photons for more than 20 years. The basic principle is that photons can perturb superconducting Cooper pairs and thereby create a resistive hotspot, which produces a current-crowding effect. This current-crowding effect reduces the superconducting energy gap near the hotspot, which results in the nanowire changing from a superconducting to a normal state near the hotspot. The resulting high impedance causes the current to be squeezed into a high frequency coaxial wire connected in parallel with it, which finally produces a measurable voltage pulse. Thanks to the maturity of current micro- and nano- fabrication techniques, high quality superconducting thin films and nano-wires have been realized in a variety of materials such as NbN, WSi, MoSi and others. These techniques include magnetron sputtering, physical vapor deposition, electron beam lithography, optical lithography, reactive ion etching, wafer cutting, etc. Measurements of superconducting single-photon detectors require cryogenic refrigeration systems, ranging from the initial liquid helium cold tank, to modern dry dilution refrigerators. On one hand, a superconducting device needs to be cooled down below its critical temperature to work. On the other hand, photon-detection events generate hot spots, which release heat to the device substrate, which the refrigerator needs to efficiently take away. Research on superconducting nanowire single-photon detectors (SNSPDs) has made significant advancements over the past two decades, including high detection efficiency, low dark counts, and broad wavelength range capabilities. Beyond improvements in traditional NbN, WSi and MoSi superconducting nanowires, there have been numerous efforts to develop high-temperature superconducting nanowires, such as MgB2 and Bi2Sr2CaCu2O8 (BSCCO), due to the operational limitations imposed by low-temperature superconducting materials. Typically, single-photon detectors require operation temperatures below the critical temperature. High-temperature superconducting nanowire single-photon detectors have currently reported to exhibit the highest operating temperature around 20 K in BSCCO, which is much lower than its critical temperature of 80 K, showing that large-gap superconductors have a comparably low sensitivity to low-energy photons. In recent years since 2018, several groups have reported that micrometer-wide superconducting wires can also be used for single-photon detection, unlike the conventional nanometer-wide superconducting wires. In general, as long as the bias current is uniformly distributed in superconducting wires and approaches the critical Cooper pair-breaking current, the hot spots generated by photon absorption can induce vortices and anti-vortices, and their motion under the action of the Lorentz force generates resistance and voltage, which ultimately produces a normal state region. An increase of the wire width to the micron scale offers more freedom to design new detectors based on current nano- and microfabrication techniques. In this doctoral dissertation, I will first introduce the basic Ginzburg-Landau theory of superconductivity and the measurement theory of superconducting circuits related to single-photon detection. I will then provide a detailed description of the equipment construction and sample fabrication techniques used in the experiment. Finally, I will present my two main studies: in one project I examined the photon-detection performance of superconducting micro-wires with a multi-pinhole structure, the correlation between dark counts and magnetic vortices, as well as the properties of critical current in magnetic fields. In a subsequent study I conducted numerical simulations using the time dependent Ginzburg-Landau equation, to analyze the dynamics of vortices in superconducting micro-strips with regular large-area perforations by pinholes as a function of magnetic field and bias current. The thus obtained predictions were then successfully confirmed in a detailed experimental study on a series of microwires.
Superconducting strip photon detector is a promising technology for achieving high detection efficiency around the 2000 nm wavelength region where exciting applications are expected in fields ranging from quantum science to atmospheric physics. However, improving the single-photon sensitivity usually requires narrower nanostrips, which necessitates advanced fabrication technologies. We demonstrate high-efficiency single-photon detection at 2000 nm using a 20-μm-wide superconducting strip, which is approximately 200 times wider than conventional nanostrips. By combining a high critical current bank (HCCB) structure that improves the wide strip's single-photon sensitivity with an optical cavity structure designed for the 2000 nm wavelength band, we realize system detection efficiency of 70% with near-unity internal detection efficiency. These results provide a high-productivity approach for high-performance single-photon detector development for the 2000 nm band.