Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2006.03130 · 2D Materials

A high- T c van der Waals superconductor based photodetector with ultra-high responsivity and nanosecond relaxation time

Paul Seifert, José Ramón Durán Retamal, Rafael Luque Merino, Hanan Herzig Sheinfux, John N. Moore, Mohammed Ali Aamir, Takashi Taniguchi, Kenji Watanabe, Kazuo Kadowaki, M. Artiglia, M. Romagnoli, Dmitri K. Efetov

Published Jun 2, 2021• 19 citations
arXivHTMLPDF

Abstract

Abstract Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and radio-astronomy. However, their broader use is held back by the low operation temperatures which require expensive cryostats. Here, we demonstrate a high- T c superconducting photodetector, which shows orders of magnitude improved performance characteristics of any superconducting detector operated above 77 K, with a responsivity of 9.61 × 10 4 V W −1 , theoretically achievable noise equivalent power of 15.9 fW Hz 1/2 and nanosecond relaxation times. At 15 K the detector reaches an ultra-high performance of 2.33 × 10 7 V W −1 and 55.2 aW Hz 1/2 . It is based on van der Waals heterostructures of the high temperature superconductor Bi 2 Sr 2 CaCu 2 O 8+ δ , which are shaped into nano-wires with ultra-small form factor using focused helium ion beam irradiation. To highlight the versatility of the detector we demonstrate its fabrication and operation on a telecom grade SiN waveguide chip. Our detector significantly relaxes the demands of practical applications of superconducting detectors and displays its possible potential for photonics based quantum applications.

DOI
10.1088/2053-1583/ac072f

Related papers

Two-dimensional cuprate nanodetector with single telecom photon sensitivity at T = 20 K

Rafael Luque Merino, Paul Seifert, José Ramón Durán Retamal +6 more

Abstract Detecting light at the single-photon level is one of the pillars of emergent photonic technologies. This is realized through state-of-the-art superconducting detectors that offer efficient, broadband and fast response. However, the use of low T C superconducting thin films limits their operation temperature to approximately 4 K and below. Here, we demonstrate proof-of-concept nanodetectors based on exfoliated, two-dimensional cuprate superconductor Bi2Sr2CaCu2O8-δ that exhibit single-photon sensitivity at telecom wavelength at a record temperature of T = 20 K. These non-optimized devices exhibit a slow ∼ m s reset time and a low detection efficiency ( ∼ 10 − 4 ). We realize the elusive prospect of single-photon sensitivity on a high-T C nanodetector thanks to a novel approach, combining van der Waals fabrication techniques and a non-invasive nanopatterning based on light ion irradiation. This result paves the way for broader application of single-photon technologies, relaxing the cryogenic constraints for single-photon detection at telecom wavelength.

arXiv:2208.05044•2D Materials•Jan 19, 2023•49 citations

Superconducting nanowire avalanche photodetectors

Sae Woo Nam, Brice Calkins, T. Gerritts +9 more

Superconducting devices offer the potential to perform at speeds and detection efficiencies higher than what is possible using conventional technologies (such as semiconducting avalanche photodiodes and photomultiplier tubs) for wavelengths from the ultraviolet to the mid-infrared. As a result, there has been increasing interest in using superconducting optical photon detectors in a variety of applications. There has been significant progress in using these types of detectors in areas of basic research such as quantum information science and quantum optics. These applications require detectors that have extremely low dark count rates, high count rates, and high quantum efficiency. I will begin by describing some of our earlier work on superconducting Transition-Edge Sensor (TES). In particular, I will describe some of the engineering involved in the cryogenic, electrical, and optical packaging so that these devices can be easily coupled into fiber-based optics. I will also describe our recent work on developing superconducting nanowire single photon detectors (SNSPD or SSPD). An SNSPD is an ultra-thin, ultra-narrow (nm scale) superconducting meander that is current biased just below its critical current density. When one or more photon is absorbed, a hot spot is formed that causes the superconductor to develop a resistance and consequently a voltage pulse. At NIST and JPL, we have been developing nanowire detectors using an amorphous alloy of tungsten-silicide. We will describe to construct systems using tungsten-silicide nanowires to achieve high detection efficiency (>90% at 1550nm). I will also describe our work to improve the performance of the device by fabricating multiple nanowires in an electrically parallel structure to implement a superconducting nanowire avalanche photodiode (SNAP)[1]. One example of this type of detector is shown in Fig 1. In this case, there are two tungsten silicide layers separated by a dielectric layer to optimize detection of light for any polarization[2]. In addition, progress on other types of SNAP detectors will be described to increase the signal size from a single photon, reduce the recovery time of the device, and to improve the jitter.

IEEE Photonics Conference•Sep 1, 2013•4 citations

Ultrafast superconducting single-photon optical detectors and their applications

Alexander A. Verevkin

Superconducting detectors become the most prominent technology for radiation sensors with ultimate performance. Typically, they are nanostructures formed from an ultra-thin superconducting film incorporated into an external antenna for efficient radiation coupling. The operation of so-called hot-electron bolometers and photodetectors (HEBs and HEPs) is based on nonequilibrium heating of the electron subsystem by the absorbed radiation and results in the film resistance and a corresponding, easily measurable voltage response when device is current biased [1-2]. A relatively simple, single-layer manufacturing technology made these devices very popular for needs of radioastronomy and remote sensing.

Opto-Canada: SPIE Regional Meeting on Optoelectronics, Photonics, and Imaging•Aug 29, 2017•0 citations

Superconducting nanostructures for counting of single photons in the infrared range

Чулкова Галина Меркурьевна, I. Milostnaya, Alexander A. Korneev +11 more

We present our studies on ultrafast superconducting single-photon detectors (SSPDs) based on ultrathin NbN nanostructures. Our SSPDs are patterned by electron beam lithography from 4-nm thick NbN film into meander-shaped strips covering square area of 10/spl times/10 /spl mu/m/sup 2/. The advances in the fabrication technology allowed us to produce highly uniform 100-120-nm-wide strips with meander filling factor close to 0.6. The detectors exploit a combined detection mechanism, where upon a single-photon absorption, an avalanche of excited hot electrons and the biasing supercurrent, jointly produce a picosecond voltage transient response across the superconducting nanostrip. The SSPDs are typically operated at 4.2 K, but they have shown that their sensitivity in the infrared radiation range can be significantly improved by lowering the operating temperature from 4.2 K to 2 K. When operated at 2 K, the SSPD quantum efficiency (QE) for visible light photons reaches 30-40%, which is the saturation value limited by optical absorption of our 4-nm-thick NbN film. For 1.55 /spl mu/m photons, QE was /spl sim/20% and decreases exponentially with the increase of the optical wavelength, but even at the wavelength of 6 /spl mu/m the detector remains sensitive to single photons and exhibits QE of about 10/sup -2/%. The dark (false) count rate at 2 K is as low as 2 /spl times/ 10/sup -4/ s/sup -1/, what makes our detector essentially a background-limited sensor. The very low dark-count rate results in the noise equivalent power (NEP) as low as 10/sup -18/ WHz/sup -1/2/ for the mid-infrared range (6 /spl mu/m). Further improvement of the SSPD performance in the mid-infrared range can be obtained by substituting NbN for the other, lower-T/sub c/ superconductors with the narrow superconducting gap and low quasiparticle diffusivity. The use of such materials will shift the cutoff wavelength towards the values even longer than 6 /spl mu/m.

CAOL . International Conference on Advanced Optoelectronics and Lasers•Jan 5, 2006•3 citations

Fast Response and High Quantum Efficiency Ti-Based TES Optical Detector and its Application to Quantum Information

Daiji Fukuda, Betty Young, Blas Cabrera +1 more

High performance optical photon detectors are indispensable for quantum communications. Superconducting detectors are very attractive because of their high quantum efficiency and intrinsic low dark count probability. We have been developing high performance optical photon detectors with a Titanium‐based transition edge sensor (Ti‐TES), which have superconducting critical temperatures around 300 mK. The relatively high transition temperature enables rapid thermal relaxation of the absorbed photon energy, resulting in excellent temporal characteristics such as fast response time below 1 μs, low timing jitter of 33 ns, and maximum counting rate over 1 MHz. Although there is a tradeoff relationship between the temporal response and energy resolution, we have simultaneously achieved high quantum efficiency and high energy resolution. We fabricated Ti‐TES devices with an optical cavity structure for photon absorption enhancement in the superconducting film. The measured quantum efficiency is over 95 % at 850 nm wavelength, and the energy resolution is 0.28 and 0.6 eV FWHM for the 5 μm and 10 μm square size devices, respectively, which is sufficient to resolve the photon number of the 850 nm light pulses. These high performance detectors are expected to be one of the powerful components in quantum information, communication and measurement technologies. We will also report and discuss the application of the Ti‐TES photon detectors to quantum communication systems.

AIP conference proceedings•Jan 1, 2009•0 citations

Ultrafast superconducting hot-electron single-photon detector

Ying Xu, Xuemei Zheng, Carlo Kosik Williams +7 more

Summary form only given. The current most-pressing need is to develop a practical, GHz-range counting single-photon detector, operational at either 1.3-/spl mu/m or 1.55-/spl mu/m radiation wavelength, for novel quantum communication and quantum cryptography systems. The presented solution of the problem is to use an ultrafast hot-electron photodetector, based on superconducting thin-film microstructures. This type of device is very promising, due to the macroscopic quantum nature of superconductors. Very fast response time and the small, (meV range) value of the superconducting energy gap characterize the superconductor, leading to the efficient avalanche process even for infrared photons.

Conference on Lasers and Electro-Optics•Jan 1, 2001•0 citations
Abstract Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and radio-astronomy. However, their broader use is held back by the low operation temperatures which require expensive cryostats. Here, we demonstrate a high- T c superconducting photodetector, which shows orders of magnitude improved performance characteristics of any superconducting detector operated above 77 K, with a responsivity of 9.61 × 10 4 V W −1 , theoretically achievable noise equivalent power of 15.9 fW Hz 1/2 and nanosecond relaxation times. At 15 K the detector reaches an ultra-high performance of 2.33 × 10 7 V W −1 and 55.2 aW Hz 1/2 . It is based on van der Waals heterostructures of the high temperature superconductor Bi 2 Sr 2 CaCu 2 O 8+ δ , which are shaped into nano-wires with ultra-small form factor using focused helium ion beam irradiation. To highlight the versatility of the detector we demonstrate its fabrication and operation on a telecom grade SiN waveguide chip. Our detector significantly relaxes the demands of practical applications of superconducting detectors and displays its possible potential for photonics based quantum applications.
Abstract Detecting light at the single-photon level is one of the pillars of emergent photonic technologies. This is realized through state-of-the-art superconducting detectors that offer efficient, broadband and fast response. However, the use of low T C superconducting thin films limits their operation temperature to approximately 4 K and below. Here, we demonstrate proof-of-concept nanodetectors based on exfoliated, two-dimensional cuprate superconductor Bi2Sr2CaCu2O8-δ that exhibit single-photon sensitivity at telecom wavelength at a record temperature of T = 20 K. These non-optimized devices exhibit a slow ∼ m s reset time and a low detection efficiency ( ∼ 10 − 4 ). We realize the elusive prospect of single-photon sensitivity on a high-T C nanodetector thanks to a novel approach, combining van der Waals fabrication techniques and a non-invasive nanopatterning based on light ion irradiation. This result paves the way for broader application of single-photon technologies, relaxing the cryogenic constraints for single-photon detection at telecom wavelength.
Superconducting devices offer the potential to perform at speeds and detection efficiencies higher than what is possible using conventional technologies (such as semiconducting avalanche photodiodes and photomultiplier tubs) for wavelengths from the ultraviolet to the mid-infrared. As a result, there has been increasing interest in using superconducting optical photon detectors in a variety of applications. There has been significant progress in using these types of detectors in areas of basic research such as quantum information science and quantum optics. These applications require detectors that have extremely low dark count rates, high count rates, and high quantum efficiency. I will begin by describing some of our earlier work on superconducting Transition-Edge Sensor (TES). In particular, I will describe some of the engineering involved in the cryogenic, electrical, and optical packaging so that these devices can be easily coupled into fiber-based optics. I will also describe our recent work on developing superconducting nanowire single photon detectors (SNSPD or SSPD). An SNSPD is an ultra-thin, ultra-narrow (nm scale) superconducting meander that is current biased just below its critical current density. When one or more photon is absorbed, a hot spot is formed that causes the superconductor to develop a resistance and consequently a voltage pulse. At NIST and JPL, we have been developing nanowire detectors using an amorphous alloy of tungsten-silicide. We will describe to construct systems using tungsten-silicide nanowires to achieve high detection efficiency (>90% at 1550nm). I will also describe our work to improve the performance of the device by fabricating multiple nanowires in an electrically parallel structure to implement a superconducting nanowire avalanche photodiode (SNAP)[1]. One example of this type of detector is shown in Fig 1. In this case, there are two tungsten silicide layers separated by a dielectric layer to optimize detection of light for any polarization[2]. In addition, progress on other types of SNAP detectors will be described to increase the signal size from a single photon, reduce the recovery time of the device, and to improve the jitter.
Superconducting detectors become the most prominent technology for radiation sensors with ultimate performance. Typically, they are nanostructures formed from an ultra-thin superconducting film incorporated into an external antenna for efficient radiation coupling. The operation of so-called hot-electron bolometers and photodetectors (HEBs and HEPs) is based on nonequilibrium heating of the electron subsystem by the absorbed radiation and results in the film resistance and a corresponding, easily measurable voltage response when device is current biased [1-2]. A relatively simple, single-layer manufacturing technology made these devices very popular for needs of radioastronomy and remote sensing.
We present our studies on ultrafast superconducting single-photon detectors (SSPDs) based on ultrathin NbN nanostructures. Our SSPDs are patterned by electron beam lithography from 4-nm thick NbN film into meander-shaped strips covering square area of 10/spl times/10 /spl mu/m/sup 2/. The advances in the fabrication technology allowed us to produce highly uniform 100-120-nm-wide strips with meander filling factor close to 0.6. The detectors exploit a combined detection mechanism, where upon a single-photon absorption, an avalanche of excited hot electrons and the biasing supercurrent, jointly produce a picosecond voltage transient response across the superconducting nanostrip. The SSPDs are typically operated at 4.2 K, but they have shown that their sensitivity in the infrared radiation range can be significantly improved by lowering the operating temperature from 4.2 K to 2 K. When operated at 2 K, the SSPD quantum efficiency (QE) for visible light photons reaches 30-40%, which is the saturation value limited by optical absorption of our 4-nm-thick NbN film. For 1.55 /spl mu/m photons, QE was /spl sim/20% and decreases exponentially with the increase of the optical wavelength, but even at the wavelength of 6 /spl mu/m the detector remains sensitive to single photons and exhibits QE of about 10/sup -2/%. The dark (false) count rate at 2 K is as low as 2 /spl times/ 10/sup -4/ s/sup -1/, what makes our detector essentially a background-limited sensor. The very low dark-count rate results in the noise equivalent power (NEP) as low as 10/sup -18/ WHz/sup -1/2/ for the mid-infrared range (6 /spl mu/m). Further improvement of the SSPD performance in the mid-infrared range can be obtained by substituting NbN for the other, lower-T/sub c/ superconductors with the narrow superconducting gap and low quasiparticle diffusivity. The use of such materials will shift the cutoff wavelength towards the values even longer than 6 /spl mu/m.
High performance optical photon detectors are indispensable for quantum communications. Superconducting detectors are very attractive because of their high quantum efficiency and intrinsic low dark count probability. We have been developing high performance optical photon detectors with a Titanium‐based transition edge sensor (Ti‐TES), which have superconducting critical temperatures around 300 mK. The relatively high transition temperature enables rapid thermal relaxation of the absorbed photon energy, resulting in excellent temporal characteristics such as fast response time below 1 μs, low timing jitter of 33 ns, and maximum counting rate over 1 MHz. Although there is a tradeoff relationship between the temporal response and energy resolution, we have simultaneously achieved high quantum efficiency and high energy resolution. We fabricated Ti‐TES devices with an optical cavity structure for photon absorption enhancement in the superconducting film. The measured quantum efficiency is over 95 % at 850 nm wavelength, and the energy resolution is 0.28 and 0.6 eV FWHM for the 5 μm and 10 μm square size devices, respectively, which is sufficient to resolve the photon number of the 850 nm light pulses. These high performance detectors are expected to be one of the powerful components in quantum information, communication and measurement technologies. We will also report and discuss the application of the Ti‐TES photon detectors to quantum communication systems.
Summary form only given. The current most-pressing need is to develop a practical, GHz-range counting single-photon detector, operational at either 1.3-/spl mu/m or 1.55-/spl mu/m radiation wavelength, for novel quantum communication and quantum cryptography systems. The presented solution of the problem is to use an ultrafast hot-electron photodetector, based on superconducting thin-film microstructures. This type of device is very promising, due to the macroscopic quantum nature of superconductors. Very fast response time and the small, (meV range) value of the superconducting energy gap characterize the superconductor, leading to the efficient avalanche process even for infrared photons.