Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2207.05960 · Communications Physics

Visualizing heterogeneous dipole fields by terahertz light coupling in individual nano-junctions

Richard H. J. Kim, Joong M. Park, Samuel Haeuser, Chuankun Huang, Di Cheng, Thomas Koschny, Jin‐Su Oh, Cameron Kopas, Hilal Cansizoglu, Kameshwar K. Yadavalli, J. Mutus, Lin Zhou, Liang Luo, Matthew J. Kramer, Jigang Wang

Published Jun 22, 2023• 16 citations
arXivHTMLPDF

Abstract

Abstract The challenge underlying superconducting quantum computing is to remove materials bottleneck for highly coherent quantum devices. The nonuniformity and complex structural components in the underlying quantum circuits often lead to local electric field concentration, charge scattering, dissipation and ultimately decoherence. Here we visualize interface dipole heterogeneous distribution of individual Al/AlO x /Al junctions employed in transmon qubits by broadband terahertz scanning near-field microscopy that enables the non-destructive and contactless identification of defective boundaries in nano-junctions at an extremely precise nanoscale level. Our THz nano-imaging tool reveals an asymmetry across the junction in electromagnetic wave-junction coupling response that manifests as hot (high intensity) vs cold (low intensity) spots in the spatial electrical field structures and correlates with defected boundaries from the multi-angle deposition processes in Josephson junction fabrication inside qubit devices. The demonstrated local electromagnetic scattering method offers high sensitivity, allowing for reliable device defect detection in the pursuit of improved quantum circuit fabrication for ultimately optimizing coherence times.

DOI
10.1038/s42005-023-01259-0

Related papers

Electric field spectroscopy of material defects in transmon qubits

Jürgen Lisenfeld, Alexander Bilmes, A. Megrant +6 more

Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only $$\approx$$ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.

arXiv:1909.09749•npj Quantum Information•Nov 22, 2019•184 citations

Terahertz near-field imaging of sidewall-induced losses in superconducting qubits

Richard H. J. Kim, Samuel Haeuser, J.-M. Park +16 more

Correlating superconducting qubit performance with advanced materials analysis is a key strategy for improving coherence. Existing diagnostics for key properties, such as dielectric loss, structural discontinuity, and interface heterogeneity, often rely on destructive electron microscopy or low-throughput millikelvin measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/spectroscopy of encapsulated niobium transmon qubits as a high-throughput proxy for performance evaluation. We identify large variations in sidewall near-field signals, implicating sidewall loss and discontinuity as major coherence limiters, and also use THz hyperspectral line scans to probe dielectric responses and field participation at Al junction interfaces.

arXiv:2506.04631•Applied Physics Letters•Sep 15, 2025•4 citations

Multi-Modal Atomic-Scale Characterization of Interfacial Defects in Superconducting Transmon Qubits

Kassandra Weber, Jaeyel Lee, Akshay A. Murthy +1 more

In superconducting transmon qubits, macroscopic characterization is the primary method for probing performance metrics, such as relaxation T1 and dephasing T2 times, resonance frequency, and quality factor. While these measurements can aid our understanding of the dielectric loss of a transmon, they do not allow us to characterize the structural and chemical inhomogeneity of the interfaces which directly impacts this energy loss. These fundamental materials problems must be studied using transmission electron microscopy (TEM) to provide insight into these defects across different qubit interfaces at an atomic scale. In this contribution, we will examine qubits, such as those shown in Figure 1, fabricated at Fermi National Accelerator Laboratory (SQMS Center) [1]. The qubit devices consist of superconducting metal base layers, typically sputter deposited Nb or Ta, and Al/AlOx/Al junctions, where the AlOx barrier is roughly 3nm in thickness and prepared through in-situ oxidation [2]. Characterizing this system prior to its integration within a superconducting radio frequency cavity establishes a baseline for the system, allowing us to isolate fabrication-induced defects before they manifest in performance degradation during quantum measurements. With the samples and fabrication process well known on a macroscopic scale, we study the atomic structure and chemistry of different heterointerfaces within the Josephson junction (JJ) of the transmon qubit and between the sapphire substrate and Nb resonator pads to identify potential defects contributing to the decoherence for qubits constructed with particular geometries. To resolve these defects, atomic-resolution imaging, energy-dispersive X-ray spectroscopy (EDS), and electron-energy loss spectroscopy (EELS) are performed using the JEOL-ARM200CF, an aberration-corrected scanning transmission electron microscope (STEM). Figure 2 provides a clear image of the stacked layers formed as the JJ, but with the addition of a platinum and carbon protective coating added during the focus ion beam (FIB) milling process to preserve pristine Al/AlOx/Al interfaces. 4D-STEM approaches, such as ptychography, orientation mapping and nanoscale diffraction will be employed to further study the layered interfaces and defects in real space and reciprocal space. These techniques can also provide insight into any damage that incurs during lamella preparation using the FIB [3]. Magnetic field-free atomic resolution imaging, differential phase contrast mapping, and monochromated EELS can be achieved using the new MARS-MONO STEM (JEM-Z200MF) without inducing current fluctuations or magnetic field related distortions [4]. By integrating this work across the functional interfaces of the transmon qubits and their different geometries, we will identify possible structural and chemical defects which limit device performance using our multi-modal approach [5]. SQMS fabricated transmon qubits fabricated on HEMEX sapphire substrate imaged via a) ZEISS optical microscope, b) SEM and c) EDS. TEM image of Josephson Junction layered interface at on JEOL-ARM200CF on the ClearView camera with a 200kV accelerating voltage.

Microscopy and Microanalysis•Jul 1, 2026•0 citations

Probing defect densities at the edges and inside Josephson junctions of superconducting qubits

Alexander Bilmes, Serhii Volosheniuk, Alexey Vladimirovich Ustinov +1 more

Abstract Tunneling defects in disordered materials form spurious two-level systems which are a major source of decoherence for micro-fabricated quantum devices. For superconducting qubits, defects in tunnel barriers of submicrometer-sized Josephson junctions couple strongest to the qubit, which necessitates optimization of the junction fabrication to mitigate defect formation. Here, we investigate whether defects appear predominantly at the edges or deep within the amorphous tunnel barrier of a junction. For this, we compare defect densities in differently shaped Al/AlO x /Al Josephson junctions that are part of a Transmon qubit. We observe that the number of detectable junction-defects is proportional to the junction area, and does not significantly scale with the junction’s circumference, which proposes that defects are evenly distributed inside the tunnel barrier. Moreover, we find very similar defect densities in thermally grown tunnel barriers that were formed either directly after the base electrode was deposited, or in a separate deposition step after removal of native oxide by Argon ion milling.

arXiv:2108.06555•npj Quantum Information•Mar 7, 2022•37 citations

Correlative Reciprocal-Space and Spectral Mapping of the Quantum Microstructure in High-Performance Epitaxial Materials for Superconducting Qubits

Peter G. Lim, David A. Garcia Wetten, Mitchell J. Walker +6 more

Superconducting qubit technology is among the most promising hardware platform for quantum computing due to its fast gate operation, manufacturing scalability, and architectural flexibility [1]. A key figure of merit that dictates quantum computing functionality is the qubit’s coherence time, which needs to be maximized in order to bring quantum computing to the practical and scalable realm [2]. In particular, the T1 relaxation time—now on the order of milliseconds—can be enhanced with materials engineering, as amorphous dielectrics and crystallographic defects, among other factors, are known to induce decoherence [3-7]. Current state-of-the-art superconducting qubit devices use amorphous AlOx sandwiched between two superconducting Al electrodes as the Josephson junction (JJ), a key element in the transmon qubit, but amorphous dielectrics introduce two-level system (TLS) loss that underlie decoherence [8]. For this reason, numerous efforts have explored crystalline dielectrics as a replacement for amorphous AlOx, since single-crystal materials do not suffer from the lack of long-range order and sub-stoichiometry that comprise TLS defects [9-12]. However, none of these alternative materials choices have been able to surpass, let alone replicate, the performance of Al-AlOx-Al JJs. In this work, we fabricate superconducting quantum devices using a novel heteroepitaxial TiN/γ-Al2O3/TiN tri-layer stack grown on sapphire (Fig. 1a) and find that the measured microwave loss of the single-crystal γ-Al2O3 dielectric is lower than that of amorphous AlOx by two orders of magnitude. For qubits made with this tri-layer to transcend the coherence of incumbent Al-AlOx-Al, the structural, chemical, and electronic defects that induce TLS loss in these materials need to be well understood. Towards this end, we combine scanning transmission electron microscopy (STEM) and scanning electron microscopy (SEM) methods to highlight structural and interfacial complexity across length scales, ultimately identifying loss sources in the TiN/γ-Al2O3/TiN heteroepitaxial tri-layer. With atomic-resolution imaging and four-dimensional (4D-)STEM nanobeam electron diffraction (NBED), we find that the dielectric γ-Al2O3 layer, though single-crystalline (Fig. 1b), suffers from the formation of antiphase boundaries (Fig. 1c), which can host strong local electric fields and enhance lossy dielectric response [13]. Correlated with these nanoscale planar defects is uniformly distributed elastic strain, on the order of 6%, between the lattice-mismatched γ-Al2O3 and TiN (Fig. 1d). In other words, the dielectric layer is fully strained to match the underlying metal layer; such high strain can distort local bonding environments and thus create new TLSs or shift existing TLSs into resonance. Beyond imperfections within the bulk of the dielectric layer, there are noteworthy interfacial defects: roughening of both TiN/γ-Al2O3 interfaces deviate from atomically flat boundaries (Fig. 1c), while anion interdiffusion across both interfaces, as evident from core-loss electron energy-loss spectral (EELS) maps (Fig. 1e), leave behind vacancies and undercoordinated metal atoms, thereby creating 1.5 – 2 nm nonstoichiometric diffuse interfacial layers, both of which can cause TLS loss. In the superconducting TiN layers, we again use NBED to identify 180°-reflected specular twinned domains, indicating distinct heteroepitaxial relationships of [111]TiN//[0006]Al2O3 and [002¯]TiN//[22¯02¯]Al2O3 (Fig. 2a) [14]. Crystal twinning of the TiN epilayer is not only spatially distributed at the nanoscale, as shown using virtual dark-field (VDF) images (Fig. 2b), but is also widespread at the microscale, as shown using SEM electron backscatter diffraction (EBSD) (Fig. 2c). While microwave performance is not limited by a single factor, it is clear that defective quantum microstructure across length scales collectively contribute to dielectric loss, and in turn, TLS-related decoherence. By correlating nanoscale crystallographic and spectroscopic information with microscale diffraction measurements, our work can guide interface engineering during material growth, paving the way towards further improvements in quantum device performance. Cross-sectional samples were prepared by subsequent 30 kV, 8 kV and 5 kV Xe+ plasma focused ion beam (FIB) using the Thermo Scientific Helios 5 Hydra CX DualBeam Plasma FIB/SEM. Samples were then plasma cleaned using South Bay Technology PC-2000 Plasma Cleaner with a 3:1 mixture of Ar:O2 gas at 20∼40 W RF power for 15 s at 150 mTorr. High-angle annular dark-field (HAADF-) and annular bright-field (ABF-) STEM images were collected on a probe-corrected JEOL JEM-ARM200CF S/TEM operating at 200 kV using JEOL detectors. The STEM convergence angle, HAADF collection angle, and ABF collection angle were 27 mrad, 90 – 370 mrad, and 23 mrad, respectively. EELS data were collected on a JEOL JEM-ARM300F GrandARM S/TEM operating at 300 kV using the Gatan GIF Continuum K3 IS system. The data were collected using a 2.5 mm aperture and a 750 eV wide energy slit at a dispersion of 0.18 eV/Ch and a camera length of 2 cm. 4D-STEM data were collected on the same microscope and detector system using a 0.5 – 1.5 mrad convergence angle and a 20 eV wide energy slit at a camera length of 4 cm. All STEM data processing was performed using the Gatan Microscopy Suite software. Top-down EBSD measurements were performed in the Thermo Scientific Helios 5 CX DualBeam FIB/SEM at 25 kV using the Oxford Symmetry S3 detector. EBSD data processing was performed using the Oxford AZtecCrystal software [15]. Defects in γ-Al2O3. a) HAADF-STEM image of a TiN/γ-Al2O3/TiN tri-layer stack on a α-Al2O3 (0001) substrate. The thickness of γ-Al2O3 is approximately 13.5 nm. b) 4D-STEM NBED pattern of the γ-Al2O3 layer, confirming the {111} out-of-plane orientation. c) Fourier-filtered atomic-resolution ABF-STEM image of the γ-Al2O3 dielectric layer, taken from the cyan-colored square region in a), emphasizing the planar defects along both TiN/γ-Al2O3 interfaces and within the γ-Al2O3 layer itself–interfacial roughness (yellow lines) and antiphase boundaries (colored parallelograms), respectively. The scale bar is 2 nm. d) In-plane and out-of-plane strain maps of the heteroepitaxial tri-layer stack, with approximately 6.5∼6.8% strain in both directions. The units of the intensity bar are such that 100% strain would be equivalent to 1.0. e) STEM-EELS maps of Ti-L2,3, N-K, and O-K edges, along with a superimposed image of the three, taken from the same region as c). The scale bars are all 5 nm. Defects in TiN. a) 4D-STEM NBED patterns and b) VDF images of nanoscale TiN {111} and {002} twins. c) SEM EBSD pole figures in the three face-centered cubic crystallographic directions, revealing that the 60° rotation twinning behavior (with the [111] twin axis) is spread across the microscale.

Microscopy and Microanalysis•Jul 1, 2026•0 citations

From Structure to Coherence: Comprehensive Electron Microscopy Analysis of Superconducting Quantum Devices

Thang Pham, Matthew Cheng, Dominic P. Goronzy +4 more

The development of quantum computers, capable of surpassing classical computing in solving specific complex problems, hinges on breakthroughs in materials science, precision device fabrication, and the optimization of quantum architectures [1]. Among the leading candidates for quantum computation, superconducting qubits, particularly those based on transmon designs, have shown promising advances with coherence times reaching hundreds of microseconds [2]. However, to fully unlock the potential of scalable quantum computing, further enhancements in coherence are necessary. The intricate structure-coherence relationship within these devices, especially at critical interfaces such as metal-air, metal-dielectric, and metal-substrate in Josephson junctions (JJs), poses a significant challenge due to the potential for two-level-system loss channels. Here, we detail our pioneering efforts to understand these structure-coherence relationships utilizing advanced electron microscopy techniques. Focusing on the Al-AlOx and Al-Si substrate interfaces in Josephson Junctions, we employ a combination of low-loss and core-loss electron energy loss spectroscopy (EELS) and four-dimensional scanning transmission electron microscopy (4D-STEM) conducted at room and ultra-low temperatures (sub-6 K). This approach allows for an unprecedented examination of the chemical composition, bonding environments, and nanoscale structures of key surfaces and interfaces critical to the quantum coherence. Figure 1 presents a typical superconducting architecture at the chip level; each superconducting qubit consists of a Josephson Junction in parallel with an ultra-low-loss capacitor to create a resonant structure in the 3-6GHz range. JJs are highlighted in the area boxed in Fig. 1A and can be observed in detail in Fig. 1B. Lamella cross-sections (as shown in Fig. 1C) were prepared using a dual-beam focused ion beam (FIB) FEI-SEM Helios Nanolab. The lift-off was performed using 30 kV Ga+ ions, and the final cleaning step was carried out at 2 kV to remove surface damage on the area of interest, resulting in a final sample thickness of 50-100 nm. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) data were collected on a probe-corrected JEOL ARM200 S/TEM operating at 200 kV. The convergent angle for ADF-STEM imaging was 25 mrad. Electron energy loss spectra (EELS) were acquired at 200 kV using a Gatan GIF Quantum on a K2 pixelated detector. Data processing (background subtraction, plural scattering removal, and signal mapping) was conducted using Gatan GMS software. Four-dimensional STEM (4D-STEM) data were collected by a K3 and STELA cameras. The convergent angles were 0.5-1.5 mrad, and the camera length was 6-10 cm. The step size was 5-10 Å. Merging microscopic insights with electrical data and theoretical frameworks, we aim to reveal how atomic-scale irregularities affect coherence times. Our results highlight key decoherence mechanisms in superconducting qubits and suggest specific improvements for qubit design and manufacturing. By linking electron microscopy findings to device performance, we outline strategies to reduce decoherence, essential for achieving reliable quantum computing. This work bridges materials science and quantum engineering, driving efforts in making scalable quantum computers forward [3]. A) Microscopic view of a superconducting transmon qubit, highlighting its symmetric design with central island and capacitor pads. B) SEM image of a JJ displaying their Al top and bottom contacts. C) STEM image of a JJ showing its key components and interfaces: Al top and bottom contact, AlOx tunnel barrier, Si substrate and Al-Si interface. A) EELS chemical maps of two interfaces, Al/Al and Al/Si using K-edges of oxygen, aluminum and silicon of a Josephson junction. It is possible to detect a formation of oxides at both interfaces. Plots showing Al and Si K-edge at 1560 eV and 1839 eV, respectively, and the ELNES are shown on the right side (Scale bar in A – 20 nm). B) Analysis of the disordered Al phases at the interfaces utilizing ePDF.

Microscopy and Microanalysis•Jul 1, 2024•0 citations
Abstract The challenge underlying superconducting quantum computing is to remove materials bottleneck for highly coherent quantum devices. The nonuniformity and complex structural components in the underlying quantum circuits often lead to local electric field concentration, charge scattering, dissipation and ultimately decoherence. Here we visualize interface dipole heterogeneous distribution of individual Al/AlO x /Al junctions employed in transmon qubits by broadband terahertz scanning near-field microscopy that enables the non-destructive and contactless identification of defective boundaries in nano-junctions at an extremely precise nanoscale level. Our THz nano-imaging tool reveals an asymmetry across the junction in electromagnetic wave-junction coupling response that manifests as hot (high intensity) vs cold (low intensity) spots in the spatial electrical field structures and correlates with defected boundaries from the multi-angle deposition processes in Josephson junction fabrication inside qubit devices. The demonstrated local electromagnetic scattering method offers high sensitivity, allowing for reliable device defect detection in the pursuit of improved quantum circuit fabrication for ultimately optimizing coherence times.
Abstract Superconducting integrated circuits have demonstrated a tremendous potential to realize integrated quantum computing processors. However, the downside of the solid-state approach is that superconducting qubits suffer strongly from energy dissipation and environmental fluctuations caused by atomic-scale defects in device materials. Further progress towards upscaled quantum processors will require improvements in device fabrication techniques, which need to be guided by novel analysis methods to understand and prevent mechanisms of defect formation. Here, we present a technique to analyse individual defects in superconducting qubits by tuning them with applied electric fields. This provides a spectroscopy method to extract the defects’ energy distribution, electric dipole moments, and coherence times. Moreover, it enables one to distinguish defects residing in Josephson junction tunnel barriers from those at circuit interfaces. We find that defects at circuit interfaces are responsible for about 60% of the dielectric loss in the investigated transmon qubit sample. About 40% of all detected defects are contained in the tunnel barriers of the large-area parasitic Josephson junctions that occur collaterally in shadow evaporation, and only ≈\approx≈ ≈ 3% are identified as strongly coupled defects, which presumably reside in the small-area qubit tunnel junctions. The demonstrated technique provides a valuable tool to assess the decoherence sources related to circuit interfaces and to tunnel junctions that is readily applicable to standard qubit samples.
Correlating superconducting qubit performance with advanced materials analysis is a key strategy for improving coherence. Existing diagnostics for key properties, such as dielectric loss, structural discontinuity, and interface heterogeneity, often rely on destructive electron microscopy or low-throughput millikelvin measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/spectroscopy of encapsulated niobium transmon qubits as a high-throughput proxy for performance evaluation. We identify large variations in sidewall near-field signals, implicating sidewall loss and discontinuity as major coherence limiters, and also use THz hyperspectral line scans to probe dielectric responses and field participation at Al junction interfaces.
In superconducting transmon qubits, macroscopic characterization is the primary method for probing performance metrics, such as relaxation T1 and dephasing T2 times, resonance frequency, and quality factor. While these measurements can aid our understanding of the dielectric loss of a transmon, they do not allow us to characterize the structural and chemical inhomogeneity of the interfaces which directly impacts this energy loss. These fundamental materials problems must be studied using transmission electron microscopy (TEM) to provide insight into these defects across different qubit interfaces at an atomic scale. In this contribution, we will examine qubits, such as those shown in Figure 1, fabricated at Fermi National Accelerator Laboratory (SQMS Center) [1]. The qubit devices consist of superconducting metal base layers, typically sputter deposited Nb or Ta, and Al/AlOx/Al junctions, where the AlOx barrier is roughly 3nm in thickness and prepared through in-situ oxidation [2]. Characterizing this system prior to its integration within a superconducting radio frequency cavity establishes a baseline for the system, allowing us to isolate fabrication-induced defects before they manifest in performance degradation during quantum measurements. With the samples and fabrication process well known on a macroscopic scale, we study the atomic structure and chemistry of different heterointerfaces within the Josephson junction (JJ) of the transmon qubit and between the sapphire substrate and Nb resonator pads to identify potential defects contributing to the decoherence for qubits constructed with particular geometries. To resolve these defects, atomic-resolution imaging, energy-dispersive X-ray spectroscopy (EDS), and electron-energy loss spectroscopy (EELS) are performed using the JEOL-ARM200CF, an aberration-corrected scanning transmission electron microscope (STEM). Figure 2 provides a clear image of the stacked layers formed as the JJ, but with the addition of a platinum and carbon protective coating added during the focus ion beam (FIB) milling process to preserve pristine Al/AlOx/Al interfaces. 4D-STEM approaches, such as ptychography, orientation mapping and nanoscale diffraction will be employed to further study the layered interfaces and defects in real space and reciprocal space. These techniques can also provide insight into any damage that incurs during lamella preparation using the FIB [3]. Magnetic field-free atomic resolution imaging, differential phase contrast mapping, and monochromated EELS can be achieved using the new MARS-MONO STEM (JEM-Z200MF) without inducing current fluctuations or magnetic field related distortions [4]. By integrating this work across the functional interfaces of the transmon qubits and their different geometries, we will identify possible structural and chemical defects which limit device performance using our multi-modal approach [5]. SQMS fabricated transmon qubits fabricated on HEMEX sapphire substrate imaged via a) ZEISS optical microscope, b) SEM and c) EDS. TEM image of Josephson Junction layered interface at on JEOL-ARM200CF on the ClearView camera with a 200kV accelerating voltage.
Abstract Tunneling defects in disordered materials form spurious two-level systems which are a major source of decoherence for micro-fabricated quantum devices. For superconducting qubits, defects in tunnel barriers of submicrometer-sized Josephson junctions couple strongest to the qubit, which necessitates optimization of the junction fabrication to mitigate defect formation. Here, we investigate whether defects appear predominantly at the edges or deep within the amorphous tunnel barrier of a junction. For this, we compare defect densities in differently shaped Al/AlO x /Al Josephson junctions that are part of a Transmon qubit. We observe that the number of detectable junction-defects is proportional to the junction area, and does not significantly scale with the junction’s circumference, which proposes that defects are evenly distributed inside the tunnel barrier. Moreover, we find very similar defect densities in thermally grown tunnel barriers that were formed either directly after the base electrode was deposited, or in a separate deposition step after removal of native oxide by Argon ion milling.
Superconducting qubit technology is among the most promising hardware platform for quantum computing due to its fast gate operation, manufacturing scalability, and architectural flexibility [1]. A key figure of merit that dictates quantum computing functionality is the qubit’s coherence time, which needs to be maximized in order to bring quantum computing to the practical and scalable realm [2]. In particular, the T1 relaxation time—now on the order of milliseconds—can be enhanced with materials engineering, as amorphous dielectrics and crystallographic defects, among other factors, are known to induce decoherence [3-7]. Current state-of-the-art superconducting qubit devices use amorphous AlOx sandwiched between two superconducting Al electrodes as the Josephson junction (JJ), a key element in the transmon qubit, but amorphous dielectrics introduce two-level system (TLS) loss that underlie decoherence [8]. For this reason, numerous efforts have explored crystalline dielectrics as a replacement for amorphous AlOx, since single-crystal materials do not suffer from the lack of long-range order and sub-stoichiometry that comprise TLS defects [9-12]. However, none of these alternative materials choices have been able to surpass, let alone replicate, the performance of Al-AlOx-Al JJs. In this work, we fabricate superconducting quantum devices using a novel heteroepitaxial TiN/γ-Al2O3/TiN tri-layer stack grown on sapphire (Fig. 1a) and find that the measured microwave loss of the single-crystal γ-Al2O3 dielectric is lower than that of amorphous AlOx by two orders of magnitude. For qubits made with this tri-layer to transcend the coherence of incumbent Al-AlOx-Al, the structural, chemical, and electronic defects that induce TLS loss in these materials need to be well understood. Towards this end, we combine scanning transmission electron microscopy (STEM) and scanning electron microscopy (SEM) methods to highlight structural and interfacial complexity across length scales, ultimately identifying loss sources in the TiN/γ-Al2O3/TiN heteroepitaxial tri-layer. With atomic-resolution imaging and four-dimensional (4D-)STEM nanobeam electron diffraction (NBED), we find that the dielectric γ-Al2O3 layer, though single-crystalline (Fig. 1b), suffers from the formation of antiphase boundaries (Fig. 1c), which can host strong local electric fields and enhance lossy dielectric response [13]. Correlated with these nanoscale planar defects is uniformly distributed elastic strain, on the order of 6%, between the lattice-mismatched γ-Al2O3 and TiN (Fig. 1d). In other words, the dielectric layer is fully strained to match the underlying metal layer; such high strain can distort local bonding environments and thus create new TLSs or shift existing TLSs into resonance. Beyond imperfections within the bulk of the dielectric layer, there are noteworthy interfacial defects: roughening of both TiN/γ-Al2O3 interfaces deviate from atomically flat boundaries (Fig. 1c), while anion interdiffusion across both interfaces, as evident from core-loss electron energy-loss spectral (EELS) maps (Fig. 1e), leave behind vacancies and undercoordinated metal atoms, thereby creating 1.5 – 2 nm nonstoichiometric diffuse interfacial layers, both of which can cause TLS loss. In the superconducting TiN layers, we again use NBED to identify 180°-reflected specular twinned domains, indicating distinct heteroepitaxial relationships of [111]TiN//[0006]Al2O3 and [002¯]TiN//[22¯02¯]Al2O3 (Fig. 2a) [14]. Crystal twinning of the TiN epilayer is not only spatially distributed at the nanoscale, as shown using virtual dark-field (VDF) images (Fig. 2b), but is also widespread at the microscale, as shown using SEM electron backscatter diffraction (EBSD) (Fig. 2c). While microwave performance is not limited by a single factor, it is clear that defective quantum microstructure across length scales collectively contribute to dielectric loss, and in turn, TLS-related decoherence. By correlating nanoscale crystallographic and spectroscopic information with microscale diffraction measurements, our work can guide interface engineering during material growth, paving the way towards further improvements in quantum device performance. Cross-sectional samples were prepared by subsequent 30 kV, 8 kV and 5 kV Xe+ plasma focused ion beam (FIB) using the Thermo Scientific Helios 5 Hydra CX DualBeam Plasma FIB/SEM. Samples were then plasma cleaned using South Bay Technology PC-2000 Plasma Cleaner with a 3:1 mixture of Ar:O2 gas at 20∼40 W RF power for 15 s at 150 mTorr. High-angle annular dark-field (HAADF-) and annular bright-field (ABF-) STEM images were collected on a probe-corrected JEOL JEM-ARM200CF S/TEM operating at 200 kV using JEOL detectors. The STEM convergence angle, HAADF collection angle, and ABF collection angle were 27 mrad, 90 – 370 mrad, and 23 mrad, respectively. EELS data were collected on a JEOL JEM-ARM300F GrandARM S/TEM operating at 300 kV using the Gatan GIF Continuum K3 IS system. The data were collected using a 2.5 mm aperture and a 750 eV wide energy slit at a dispersion of 0.18 eV/Ch and a camera length of 2 cm. 4D-STEM data were collected on the same microscope and detector system using a 0.5 – 1.5 mrad convergence angle and a 20 eV wide energy slit at a camera length of 4 cm. All STEM data processing was performed using the Gatan Microscopy Suite software. Top-down EBSD measurements were performed in the Thermo Scientific Helios 5 CX DualBeam FIB/SEM at 25 kV using the Oxford Symmetry S3 detector. EBSD data processing was performed using the Oxford AZtecCrystal software [15]. Defects in γ-Al2O3. a) HAADF-STEM image of a TiN/γ-Al2O3/TiN tri-layer stack on a α-Al2O3 (0001) substrate. The thickness of γ-Al2O3 is approximately 13.5 nm. b) 4D-STEM NBED pattern of the γ-Al2O3 layer, confirming the {111} out-of-plane orientation. c) Fourier-filtered atomic-resolution ABF-STEM image of the γ-Al2O3 dielectric layer, taken from the cyan-colored square region in a), emphasizing the planar defects along both TiN/γ-Al2O3 interfaces and within the γ-Al2O3 layer itself–interfacial roughness (yellow lines) and antiphase boundaries (colored parallelograms), respectively. The scale bar is 2 nm. d) In-plane and out-of-plane strain maps of the heteroepitaxial tri-layer stack, with approximately 6.5∼6.8% strain in both directions. The units of the intensity bar are such that 100% strain would be equivalent to 1.0. e) STEM-EELS maps of Ti-L2,3, N-K, and O-K edges, along with a superimposed image of the three, taken from the same region as c). The scale bars are all 5 nm. Defects in TiN. a) 4D-STEM NBED patterns and b) VDF images of nanoscale TiN {111} and {002} twins. c) SEM EBSD pole figures in the three face-centered cubic crystallographic directions, revealing that the 60° rotation twinning behavior (with the [111] twin axis) is spread across the microscale.
The development of quantum computers, capable of surpassing classical computing in solving specific complex problems, hinges on breakthroughs in materials science, precision device fabrication, and the optimization of quantum architectures [1]. Among the leading candidates for quantum computation, superconducting qubits, particularly those based on transmon designs, have shown promising advances with coherence times reaching hundreds of microseconds [2]. However, to fully unlock the potential of scalable quantum computing, further enhancements in coherence are necessary. The intricate structure-coherence relationship within these devices, especially at critical interfaces such as metal-air, metal-dielectric, and metal-substrate in Josephson junctions (JJs), poses a significant challenge due to the potential for two-level-system loss channels. Here, we detail our pioneering efforts to understand these structure-coherence relationships utilizing advanced electron microscopy techniques. Focusing on the Al-AlOx and Al-Si substrate interfaces in Josephson Junctions, we employ a combination of low-loss and core-loss electron energy loss spectroscopy (EELS) and four-dimensional scanning transmission electron microscopy (4D-STEM) conducted at room and ultra-low temperatures (sub-6 K). This approach allows for an unprecedented examination of the chemical composition, bonding environments, and nanoscale structures of key surfaces and interfaces critical to the quantum coherence. Figure 1 presents a typical superconducting architecture at the chip level; each superconducting qubit consists of a Josephson Junction in parallel with an ultra-low-loss capacitor to create a resonant structure in the 3-6GHz range. JJs are highlighted in the area boxed in Fig. 1A and can be observed in detail in Fig. 1B. Lamella cross-sections (as shown in Fig. 1C) were prepared using a dual-beam focused ion beam (FIB) FEI-SEM Helios Nanolab. The lift-off was performed using 30 kV Ga+ ions, and the final cleaning step was carried out at 2 kV to remove surface damage on the area of interest, resulting in a final sample thickness of 50-100 nm. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) data were collected on a probe-corrected JEOL ARM200 S/TEM operating at 200 kV. The convergent angle for ADF-STEM imaging was 25 mrad. Electron energy loss spectra (EELS) were acquired at 200 kV using a Gatan GIF Quantum on a K2 pixelated detector. Data processing (background subtraction, plural scattering removal, and signal mapping) was conducted using Gatan GMS software. Four-dimensional STEM (4D-STEM) data were collected by a K3 and STELA cameras. The convergent angles were 0.5-1.5 mrad, and the camera length was 6-10 cm. The step size was 5-10 Å. Merging microscopic insights with electrical data and theoretical frameworks, we aim to reveal how atomic-scale irregularities affect coherence times. Our results highlight key decoherence mechanisms in superconducting qubits and suggest specific improvements for qubit design and manufacturing. By linking electron microscopy findings to device performance, we outline strategies to reduce decoherence, essential for achieving reliable quantum computing. This work bridges materials science and quantum engineering, driving efforts in making scalable quantum computers forward [3]. A) Microscopic view of a superconducting transmon qubit, highlighting its symmetric design with central island and capacitor pads. B) SEM image of a JJ displaying their Al top and bottom contacts. C) STEM image of a JJ showing its key components and interfaces: Al top and bottom contact, AlOx tunnel barrier, Si substrate and Al-Si interface. A) EELS chemical maps of two interfaces, Al/Al and Al/Si using K-edges of oxygen, aluminum and silicon of a Josephson junction. It is possible to detect a formation of oxides at both interfaces. Plots showing Al and Si K-edge at 1560 eV and 1839 eV, respectively, and the ELNES are shown on the right side (Scale bar in A – 20 nm). B) Analysis of the disordered Al phases at the interfaces utilizing ePDF.