Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2206.08581 · Quantum Science and Technology

Optimal and robust quantum state tomography of star-topology register

Ran Liu, Yanjun Hou, Ze Wu, Hui Zhou, Jiahui Chen, Zhaokai Li, Xinhua Peng

Published Aug 8, 2024• 2 citations
arXivHTMLPDF

Abstract

Abstract While quantum state tomography plays a vital role in the verification and benchmarking of quantum systems, it is an intractable task if the controllability of the quantum registers is constrained. In this paper, we propose a novel scheme for optimal and robust quantum state tomography for systems with constrained controllability. Based on the specific symmetry, we decompose the Hilbert space to alleviate the complexity of tomography and design a compact strategy with the minimum number of measurements. To switch between these measurement settings, we adopted parameterized quantum circuits consisting of local operations and free evolution, which are easy to implement in most practical systems. Then the parameters of these circuits were optimized to improve the robustness against errors of measurements. We demonstrated the experimental feasibility of our method on a 4-spin star-topology register and numerically studied its ability to characterize large-scale systems on a 10-spin star-topology register, respectively. Our results can help future investigations of quantum systems with constrained ability of quantum control and measurement.

DOI
10.1088/2058-9565/ad692c

Related papers

Quantum State Tomography via Variational Quantum Algorithms

Jincheng Zhang

Quantum state tomography (QST) is a fundamental technique in quantum information science, aiming to reconstruct the density matrix of an unknown quantum state from experimental measurements. However, traditional QST methods often suffer from significant computational demands and are highly susceptible to measurement noise, hindering their practical application, particularly with near-term quantum computers. This work proposes a novel approach to QST utilizing variational quantum algorithms (VQAs). VQAs iteratively optimize a parameterized quantum circuit to minimize a cost function related to the fidelity between the desired state and the state predicted by the circuit. This approach dramatically reduces the number of required measurements and offers the potential for achieving high-fidelity state reconstruction with lower quantum resource requirements. We detail the theoretical framework, outlining the core algorithms and mathematical formulations. The key advantage lies in the ability to learn the state directly, mitigating the limitations of traditional methods. We explore the optimization landscape and discuss strategies for improving convergence and robustness. The results demonstrate a promising path toward scalable and robust QST on quantum devices.

•Aug 29, 2026•0 citations

A Two-Stage Solution to Quantum Process Tomography: Error Analysis and Optimal Design

Shuixin Xiao, Yuanlong Wang, Jun Zhang +4 more

Quantum process tomography is a critical task for characterizing the dynamics of quantum systems and achieving precise quantum control. In this paper, we propose a two-stage solution for both trace-preserving and non-trace-preserving quantum process tomography. Utilizing a tensor structure, our algorithm exhibits a computational complexity of$O(MLd^{2})$where d is the dimension of the quantum system and$M, L~(M\geq d^{2}, L\geq d^{2})$represent the numbers of different input states and measurement operators, respectively. We establish an analytical error upper bound and then design the optimal input states and the optimal measurement operators, which are both based on minimizing the error upper bound and maximizing the robustness characterized by the condition number. Numerical examples and testing on IBM quantum devices are presented to demonstrate the performance and efficiency of our algorithm.

arXiv:2402.08952•IEEE Transactions on Information Theory•Dec 24, 2024•4 citations

Improved quantum state tomography for systems with XX+YY couplings and Z readouts

Tao Xin

Quantum device characterization via state tomography plays an important role in both validating quantum hardware and processing quantum information, but it needs the exponential number of the measurements. For the systems with XX$+$YY-type couplings and $Z$ readouts, such as superconducting quantum computing (SQC) systems, traditional quantum state tomography (QST) using single-qubit readout operations at least requires ${3}^{n}$ measurement settings in reconstructing an $n$-qubit state. In this paper, I propose an improved QST by adding two-qubit evolutions as the readout operations and obtain an optimal tomographic scheme using the integer programming optimization. I, respectively, apply the alternative scheme on SQC systems with the nearest-neighbor, two-dimensional, and all-to-all connectivities on qubits. It shows that this method can reduce the number of measurements by over 60% compared with the traditional QST. In addition, comparison with the traditional scheme in the experimental feasibility and robustness against errors was made by numerical simulation. It is found that the alternative scheme has good implementability and can achieve comparable or even better accuracy than the traditional scheme. It is expected that the experimentalist from related fields can directly utilize the ready-made results for reconstructing quantum states involved in their research.

arXiv:2006.15872•Physical Review A•Nov 10, 2020•12 citations

Optimal design of measurement settings for quantum-state-tomography experiments

Jun Li, Shilin Huang, Zhihuang Luo +3 more

Quantum state tomography is an indispensable but costly part of many quantum experiments. Typically, it requires measurements to be carried out in a number of different settings on a fixed experimental setup. The collected data are often informationally overcomplete, with the amount of information redundancy depending on the particular set of measurement settings chosen. This raises a question about how one should optimally take data so that the number of measurement settings necessary can be reduced. Here, we cast this problem in terms of integer programming. For a given experimental setup, standard integer-programming algorithms allow us to find the minimum set of readout operations that can realize a target tomographic task. We apply the method to certain basic and practical state-tomographic problems in nuclear-magnetic-resonance experimental systems. The results show that considerably fewer readout operations can be found using our technique than by using the previous greedy search strategy. Therefore, our method could be helpful for simplifying measurement schemes to minimize the experimental effort.

arXiv:1705.01524•Physical Review A•Sep 6, 2017•25 citations

Efficient quantum state tomography with auxiliary systems

Wenlong Zhao, Da Zhang, Huili Zhang +2 more

Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of $O(d^2)$, significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.

arXiv:2507.16532•Physical Review A•Mar 2, 2026•1 citation

Robustness of random-control quantum-state tomography

Jingcheng Wang, Shaoliang Zhang, Jianming Cai +3 more

In a recently demonstrated quantum-state tomography scheme [P. Yang, M. Yu, R. Betzholz, C. Arenz, and J. Cai, Phys. Rev. Lett. 124, 010405 (2020)], a random-control field is locally applied to a multipartite system to reconstruct the full quantum state of the system through single-observable measurements. Here, we analyze the robustness of such a tomography scheme against measurement errors. We characterize the sensitivity to measurement errors using the condition number of a linear system that fully describes the tomography process. Using results from random matrix theory we derive the scaling law of the logarithm of this condition number with respect to the system size when Haar-random evolutions are considered. While this expression is independent of how Haar randomness is created, we also perform numerical simulations to investigate the temporal behavior of the robustness for two specific quantum systems that are driven by a single random-control field. Interestingly, we find that before the mean value of the logarithm of the condition number as a function of the driving time asymptotically approaches the value predicted for a Haar-random evolution it reaches a plateau whose length increases with the system size.

arXiv:2302.07439•Physical Review A•Aug 9, 2023•1 citation
Abstract While quantum state tomography plays a vital role in the verification and benchmarking of quantum systems, it is an intractable task if the controllability of the quantum registers is constrained. In this paper, we propose a novel scheme for optimal and robust quantum state tomography for systems with constrained controllability. Based on the specific symmetry, we decompose the Hilbert space to alleviate the complexity of tomography and design a compact strategy with the minimum number of measurements. To switch between these measurement settings, we adopted parameterized quantum circuits consisting of local operations and free evolution, which are easy to implement in most practical systems. Then the parameters of these circuits were optimized to improve the robustness against errors of measurements. We demonstrated the experimental feasibility of our method on a 4-spin star-topology register and numerically studied its ability to characterize large-scale systems on a 10-spin star-topology register, respectively. Our results can help future investigations of quantum systems with constrained ability of quantum control and measurement.
Quantum state tomography (QST) is a fundamental technique in quantum information science, aiming to reconstruct the density matrix of an unknown quantum state from experimental measurements. However, traditional QST methods often suffer from significant computational demands and are highly susceptible to measurement noise, hindering their practical application, particularly with near-term quantum computers. This work proposes a novel approach to QST utilizing variational quantum algorithms (VQAs). VQAs iteratively optimize a parameterized quantum circuit to minimize a cost function related to the fidelity between the desired state and the state predicted by the circuit. This approach dramatically reduces the number of required measurements and offers the potential for achieving high-fidelity state reconstruction with lower quantum resource requirements. We detail the theoretical framework, outlining the core algorithms and mathematical formulations. The key advantage lies in the ability to learn the state directly, mitigating the limitations of traditional methods. We explore the optimization landscape and discuss strategies for improving convergence and robustness. The results demonstrate a promising path toward scalable and robust QST on quantum devices.
Quantum process tomography is a critical task for characterizing the dynamics of quantum systems and achieving precise quantum control. In this paper, we propose a two-stage solution for both trace-preserving and non-trace-preserving quantum process tomography. Utilizing a tensor structure, our algorithm exhibits a computational complexity ofO(MLd2)O(MLd^{2})O(MLd2)where d is the dimension of the quantum system andM,L (M≥d2,L≥d2)M, L~(M\geq d^{2}, L\geq d^{2})M,L (M≥d2,L≥d2)represent the numbers of different input states and measurement operators, respectively. We establish an analytical error upper bound and then design the optimal input states and the optimal measurement operators, which are both based on minimizing the error upper bound and maximizing the robustness characterized by the condition number. Numerical examples and testing on IBM quantum devices are presented to demonstrate the performance and efficiency of our algorithm.
Quantum device characterization via state tomography plays an important role in both validating quantum hardware and processing quantum information, but it needs the exponential number of the measurements. For the systems with XX+++YY-type couplings and ZZZ readouts, such as superconducting quantum computing (SQC) systems, traditional quantum state tomography (QST) using single-qubit readout operations at least requires 3n{3}^{n}3n measurement settings in reconstructing an nnn-qubit state. In this paper, I propose an improved QST by adding two-qubit evolutions as the readout operations and obtain an optimal tomographic scheme using the integer programming optimization. I, respectively, apply the alternative scheme on SQC systems with the nearest-neighbor, two-dimensional, and all-to-all connectivities on qubits. It shows that this method can reduce the number of measurements by over 60% compared with the traditional QST. In addition, comparison with the traditional scheme in the experimental feasibility and robustness against errors was made by numerical simulation. It is found that the alternative scheme has good implementability and can achieve comparable or even better accuracy than the traditional scheme. It is expected that the experimentalist from related fields can directly utilize the ready-made results for reconstructing quantum states involved in their research.
Quantum state tomography is an indispensable but costly part of many quantum experiments. Typically, it requires measurements to be carried out in a number of different settings on a fixed experimental setup. The collected data are often informationally overcomplete, with the amount of information redundancy depending on the particular set of measurement settings chosen. This raises a question about how one should optimally take data so that the number of measurement settings necessary can be reduced. Here, we cast this problem in terms of integer programming. For a given experimental setup, standard integer-programming algorithms allow us to find the minimum set of readout operations that can realize a target tomographic task. We apply the method to certain basic and practical state-tomographic problems in nuclear-magnetic-resonance experimental systems. The results show that considerably fewer readout operations can be found using our technique than by using the previous greedy search strategy. Therefore, our method could be helpful for simplifying measurement schemes to minimize the experimental effort.
Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of O(d2)O(d^2)O(d2), significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.
In a recently demonstrated quantum-state tomography scheme [P. Yang, M. Yu, R. Betzholz, C. Arenz, and J. Cai, Phys. Rev. Lett. 124, 010405 (2020)], a random-control field is locally applied to a multipartite system to reconstruct the full quantum state of the system through single-observable measurements. Here, we analyze the robustness of such a tomography scheme against measurement errors. We characterize the sensitivity to measurement errors using the condition number of a linear system that fully describes the tomography process. Using results from random matrix theory we derive the scaling law of the logarithm of this condition number with respect to the system size when Haar-random evolutions are considered. While this expression is independent of how Haar randomness is created, we also perform numerical simulations to investigate the temporal behavior of the robustness for two specific quantum systems that are driven by a single random-control field. Interestingly, we find that before the mean value of the logarithm of the condition number as a function of the driving time asymptotically approaches the value predicted for a Haar-random evolution it reaches a plateau whose length increases with the system size.