Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2006.15872 · Physical Review A

Improved quantum state tomography for systems with XX+YY couplings and Z readouts

Tao Xin

Published Nov 10, 2020• 12 citations
arXivHTMLPDF

Abstract

Quantum device characterization via state tomography plays an important role in both validating quantum hardware and processing quantum information, but it needs the exponential number of the measurements. For the systems with XX$+$YY-type couplings and $Z$ readouts, such as superconducting quantum computing (SQC) systems, traditional quantum state tomography (QST) using single-qubit readout operations at least requires ${3}^{n}$ measurement settings in reconstructing an $n$-qubit state. In this paper, I propose an improved QST by adding two-qubit evolutions as the readout operations and obtain an optimal tomographic scheme using the integer programming optimization. I, respectively, apply the alternative scheme on SQC systems with the nearest-neighbor, two-dimensional, and all-to-all connectivities on qubits. It shows that this method can reduce the number of measurements by over 60% compared with the traditional QST. In addition, comparison with the traditional scheme in the experimental feasibility and robustness against errors was made by numerical simulation. It is found that the alternative scheme has good implementability and can achieve comparable or even better accuracy than the traditional scheme. It is expected that the experimentalist from related fields can directly utilize the ready-made results for reconstructing quantum states involved in their research.

DOI
10.1103/physreva.102.052410

Related papers

Optimal quantum state tomography with noisy gates

Violeta N. Ivanova-Rohling, Niklas Rohling, Guido Burkard

Abstract Quantum state tomography (QST) represents an essential tool for the characterization, verification, and validation (QCVV) of quantum processors. Only for a few idealized scenarios, there are analytic results for the optimal measurement set for QST. E.g., in a setting of non-degenerate measurements, an optimal minimal set of measurement operators for QST has eigenbases which are mutually unbiased. However, in other set-ups, dependent on the rank of the projection operators and the size of the quantum system, the optimal choice of measurements for efficient QST needs to be numerically approximated. We have generalized this problem by introducing the framework of customized efficient QST. Here we extend customized QST and look for the optimal measurement set for QST in the case where some of the quantum gates applied in the measurement process are noisy. To achieve this, we use two distinct noise models: first, the depolarizing channel, and second, over- and under-rotation in single-qubit and to two-qubit gates (for further information, please see Methods). We demonstrate the benefit of using entangling gates for the efficient QST measurement schemes for two qubits at realistic noise levels, by comparing the fidelity of reconstruction of our optimized QST measurement set to the state-of-the-art scheme using only product bases.

arXiv:2203.05677•EPJ Quantum Technology•Jun 28, 2023•17 citations

Multiqubit State Tomography with Only a Few Pauli Measurements

Xudan Chai, Teng Ma, Qihao Guo +3 more

In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is not so practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multiqubit quantum states. Furthermore, it was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternative effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.

arXiv:2305.19873•Physical Review Applied•Sep 18, 2023•2 citations

Quantum State Tomography via Variational Quantum Algorithms

Jincheng Zhang

Quantum state tomography (QST) is a fundamental technique in quantum information science, aiming to reconstruct the density matrix of an unknown quantum state from experimental measurements. However, traditional QST methods often suffer from significant computational demands and are highly susceptible to measurement noise, hindering their practical application, particularly with near-term quantum computers. This work proposes a novel approach to QST utilizing variational quantum algorithms (VQAs). VQAs iteratively optimize a parameterized quantum circuit to minimize a cost function related to the fidelity between the desired state and the state predicted by the circuit. This approach dramatically reduces the number of required measurements and offers the potential for achieving high-fidelity state reconstruction with lower quantum resource requirements. We detail the theoretical framework, outlining the core algorithms and mathematical formulations. The key advantage lies in the ability to learn the state directly, mitigating the limitations of traditional methods. We explore the optimization landscape and discuss strategies for improving convergence and robustness. The results demonstrate a promising path toward scalable and robust QST on quantum devices.

•Aug 29, 2026•0 citations

Quantum State Tomography with Entangled Photon Sources

Jincheng Zhang

Quantum state tomography (QST) is a fundamental technique for characterizing quantum states, crucial for validating quantum technologies. However, traditional QST methods often suffer from limitations in measurement efficiency and accuracy, particularly when dealing with complex quantum systems. This work presents an advanced approach to QST utilizing entangled photon sources and a meticulously designed measurement strategy. The core of this method lies in exploiting the correlations inherent in entangled photon pairs to significantly enhance the reconstruction process. We detail a novel scheme that minimizes measurement errors and maximizes the information extracted from each measurement, leading to a substantial improvement in both the accuracy and resolution of the reconstructed quantum state. The theoretical framework outlines the key equations and algorithms used for state reconstruction, focusing on a practical implementation. The results presented suggest a pathway towards more robust and reliable QST, paving the way for more accurate characterization of quantum systems and the development of advanced quantum applications.

•Aug 28, 2026•0 citations

Optimal design of measurement settings for quantum-state-tomography experiments

Jun Li, Shilin Huang, Zhihuang Luo +3 more

Quantum state tomography is an indispensable but costly part of many quantum experiments. Typically, it requires measurements to be carried out in a number of different settings on a fixed experimental setup. The collected data are often informationally overcomplete, with the amount of information redundancy depending on the particular set of measurement settings chosen. This raises a question about how one should optimally take data so that the number of measurement settings necessary can be reduced. Here, we cast this problem in terms of integer programming. For a given experimental setup, standard integer-programming algorithms allow us to find the minimum set of readout operations that can realize a target tomographic task. We apply the method to certain basic and practical state-tomographic problems in nuclear-magnetic-resonance experimental systems. The results show that considerably fewer readout operations can be found using our technique than by using the previous greedy search strategy. Therefore, our method could be helpful for simplifying measurement schemes to minimize the experimental effort.

arXiv:1705.01524•Physical Review A•Sep 6, 2017•25 citations

Quantum State Tomography with Measurement Device Independent Quantum Computing

Jincheng Zhang

Quantum state tomography (QST) is a critical technique for characterizing the state of quantum systems, particularly in the context of quantum computing. Traditional QST protocols rely heavily on precise knowledge of the measurement devices used, introducing significant vulnerabilities to systematic errors and device imperfections. This paper proposes a novel measurement device-independent (MDI) quantum state tomography protocol designed specifically for multi-qubit systems. The core principle of this approach is the strategic utilization of entanglement to minimize the impact of device-specific biases, thereby achieving a more robust and accurate reconstruction of the quantum state. The protocol involves a carefully designed series of measurements performed by multiple, potentially imperfect, measurement devices. Through analyzing the correlations generated by these measurements, we can, with a high degree of certainty, deduce the underlying quantum state without requiring perfect knowledge of each individual device. This MDI QST method represents a significant advancement in overcoming the limitations of conventional QST, paving the way for more reliable and scalable quantum state characterization in complex quantum computing architectures. The theoretical framework and key equations are presented, demonstrating the feasibility and advantages of this approach.

•Sep 5, 2026•0 citations
Quantum device characterization via state tomography plays an important role in both validating quantum hardware and processing quantum information, but it needs the exponential number of the measurements. For the systems with XX+++YY-type couplings and ZZZ readouts, such as superconducting quantum computing (SQC) systems, traditional quantum state tomography (QST) using single-qubit readout operations at least requires 3n{3}^{n}3n measurement settings in reconstructing an nnn-qubit state. In this paper, I propose an improved QST by adding two-qubit evolutions as the readout operations and obtain an optimal tomographic scheme using the integer programming optimization. I, respectively, apply the alternative scheme on SQC systems with the nearest-neighbor, two-dimensional, and all-to-all connectivities on qubits. It shows that this method can reduce the number of measurements by over 60% compared with the traditional QST. In addition, comparison with the traditional scheme in the experimental feasibility and robustness against errors was made by numerical simulation. It is found that the alternative scheme has good implementability and can achieve comparable or even better accuracy than the traditional scheme. It is expected that the experimentalist from related fields can directly utilize the ready-made results for reconstructing quantum states involved in their research.
Abstract Quantum state tomography (QST) represents an essential tool for the characterization, verification, and validation (QCVV) of quantum processors. Only for a few idealized scenarios, there are analytic results for the optimal measurement set for QST. E.g., in a setting of non-degenerate measurements, an optimal minimal set of measurement operators for QST has eigenbases which are mutually unbiased. However, in other set-ups, dependent on the rank of the projection operators and the size of the quantum system, the optimal choice of measurements for efficient QST needs to be numerically approximated. We have generalized this problem by introducing the framework of customized efficient QST. Here we extend customized QST and look for the optimal measurement set for QST in the case where some of the quantum gates applied in the measurement process are noisy. To achieve this, we use two distinct noise models: first, the depolarizing channel, and second, over- and under-rotation in single-qubit and to two-qubit gates (for further information, please see Methods). We demonstrate the benefit of using entangling gates for the efficient QST measurement schemes for two qubits at realistic noise levels, by comparing the fidelity of reconstruction of our optimized QST measurement set to the state-of-the-art scheme using only product bases.
In quantum information transformation and quantum computation, the most critical issues are security and accuracy. These features, therefore, stimulate research on quantum state characterization. A characterization tool, quantum state tomography, reconstructs the density matrix of an unknown quantum state. Theoretically, reconstructing an unknown state using this method can be arbitrarily accurate. However, this is not so practical owing to the huge burden of measurements and data processing for large numbers of qubits. Even comprising an efficient estimator and a precise algorithm, an optimal tomographic framework can also be overburdened owing to the exponential growth of the measurements. Moreover, the consequential postprocessing of huge amounts of data challenges the capacity of computers. Thus, it is crucial to build an efficient framework that requires fewer measurements but yields an expected accuracy. To this end, we built a tomography schema by which only a few Pauli measurements enable an accurate tomographic reconstruction. Subsequently, this schema was verified as efficient and accurate through numerical simulations on the tomography of multiqubit quantum states. Furthermore, it was proven to be robust through numerical simulations on a noisy superconducting qubit system. Therefore, the tomography schema paves an alternative effective way to reconstruct the density matrix of a quantum state owing to its efficiency and accuracy, which are essential for quantum state tomography.
Quantum state tomography (QST) is a fundamental technique in quantum information science, aiming to reconstruct the density matrix of an unknown quantum state from experimental measurements. However, traditional QST methods often suffer from significant computational demands and are highly susceptible to measurement noise, hindering their practical application, particularly with near-term quantum computers. This work proposes a novel approach to QST utilizing variational quantum algorithms (VQAs). VQAs iteratively optimize a parameterized quantum circuit to minimize a cost function related to the fidelity between the desired state and the state predicted by the circuit. This approach dramatically reduces the number of required measurements and offers the potential for achieving high-fidelity state reconstruction with lower quantum resource requirements. We detail the theoretical framework, outlining the core algorithms and mathematical formulations. The key advantage lies in the ability to learn the state directly, mitigating the limitations of traditional methods. We explore the optimization landscape and discuss strategies for improving convergence and robustness. The results demonstrate a promising path toward scalable and robust QST on quantum devices.
Quantum state tomography (QST) is a fundamental technique for characterizing quantum states, crucial for validating quantum technologies. However, traditional QST methods often suffer from limitations in measurement efficiency and accuracy, particularly when dealing with complex quantum systems. This work presents an advanced approach to QST utilizing entangled photon sources and a meticulously designed measurement strategy. The core of this method lies in exploiting the correlations inherent in entangled photon pairs to significantly enhance the reconstruction process. We detail a novel scheme that minimizes measurement errors and maximizes the information extracted from each measurement, leading to a substantial improvement in both the accuracy and resolution of the reconstructed quantum state. The theoretical framework outlines the key equations and algorithms used for state reconstruction, focusing on a practical implementation. The results presented suggest a pathway towards more robust and reliable QST, paving the way for more accurate characterization of quantum systems and the development of advanced quantum applications.
Quantum state tomography is an indispensable but costly part of many quantum experiments. Typically, it requires measurements to be carried out in a number of different settings on a fixed experimental setup. The collected data are often informationally overcomplete, with the amount of information redundancy depending on the particular set of measurement settings chosen. This raises a question about how one should optimally take data so that the number of measurement settings necessary can be reduced. Here, we cast this problem in terms of integer programming. For a given experimental setup, standard integer-programming algorithms allow us to find the minimum set of readout operations that can realize a target tomographic task. We apply the method to certain basic and practical state-tomographic problems in nuclear-magnetic-resonance experimental systems. The results show that considerably fewer readout operations can be found using our technique than by using the previous greedy search strategy. Therefore, our method could be helpful for simplifying measurement schemes to minimize the experimental effort.
Quantum state tomography (QST) is a critical technique for characterizing the state of quantum systems, particularly in the context of quantum computing. Traditional QST protocols rely heavily on precise knowledge of the measurement devices used, introducing significant vulnerabilities to systematic errors and device imperfections. This paper proposes a novel measurement device-independent (MDI) quantum state tomography protocol designed specifically for multi-qubit systems. The core principle of this approach is the strategic utilization of entanglement to minimize the impact of device-specific biases, thereby achieving a more robust and accurate reconstruction of the quantum state. The protocol involves a carefully designed series of measurements performed by multiple, potentially imperfect, measurement devices. Through analyzing the correlations generated by these measurements, we can, with a high degree of certainty, deduce the underlying quantum state without requiring perfect knowledge of each individual device. This MDI QST method represents a significant advancement in overcoming the limitations of conventional QST, paving the way for more reliable and scalable quantum state characterization in complex quantum computing architectures. The theoretical framework and key equations are presented, demonstrating the feasibility and advantages of this approach.