Abstract Autonomous quantum error correction has gained considerable attention to avoid complicated measurements and feedback. Despite its simplicity compared with the conventional measurement-based quantum error correction, it is still a far from practical technique because of significant hardware overhead. We propose an autonomous quantum error correction scheme for a rotational symmetric bosonic code in a four-photon Kerr parametric oscillator. Our scheme is the simplest possible error correction scheme that can surpass the break-even point—it requires only a single continuous microwave tone. We also introduce an unconditional reset scheme that requires one more continuous microwave tone in addition to that for the error correction. The key properties underlying this simplicity are protected quasienergy states of a four-photon Kerr parametric oscillator and the degeneracy in its quasienergy level structure. These properties eliminate the need for state-by-state correction in the Fock basis. Our schemes greatly reduce the complexity of autonomous quantum error correction and thus may accelerate the use of the bosonic code for practical quantum computation.
Abstract Autonomous quantum error correction has gained considerable attention to avoid complicated measurements and feedback. Despite its simplicity compared with the conventional measurement-based quantum error correction, it is still a far from practical technique because of significant hardware overhead. We propose an autonomous quantum error correction scheme for a rotational symmetric bosonic code in a four-photon Kerr parametric oscillator. Our scheme is the simplest possible error correction scheme that can surpass the break-even point—it requires only a single continuous microwave tone. We also introduce an unconditional reset scheme that requires one more continuous microwave tone in addition to that for the error correction. The key properties underlying this simplicity are protected quasienergy states of a four-photon Kerr parametric oscillator and the degeneracy in its quasienergy level structure. These properties eliminate the need for state-by-state correction in the Fock basis. Our schemes greatly reduce the complexity of autonomous quantum error correction and thus may accelerate the use of the bosonic code for practical quantum computation.
Bosonic codes, leveraging infinite-dimensional Hilbert spaces for redundancy, offer great potential for encoding quantum information. However, a practical continuous-variable bosonic code that can simultaneously correct both photon loss and dephasing errors, while achieving a high level of compliance with the Knill-Laflamme conditions within an experimentally friendly structure, remains elusive. Here, we propose a code based on the superposition of squeezed Fock states with an error-correcting capability that scales as ∝exp(-7r), where r is the squeezing level. The codewords remain orthogonal at all squeezing levels. In particular, this code achieves high-precision error correction for both single-photon loss and dephasing, even at moderate squeezing levels. Building on this code, we develop quantum error correction schemes that exceed the breakeven point, supported by analytical derivations of all necessary quantum gates. Our code offers a competitive alternative to previous encodings for quantum computation using continuous bosonic qubits.
Autonomous quantum error correction (AQEC) protects logical qubits by engineered dissipation and thus circumvents the necessity of frequent, error-prone measurement-feedback loops. Bosonic code spaces, where single-photon loss represents the dominant source of error, are promising candidates for AQEC due to their flexibility and controllability. While existing proposals have demonstrated the in-principle feasibility of AQEC with bosonic code spaces, these schemes are typically based on the exact implementation of the Knill-Laflamme conditions and thus require the realization of Hamiltonian distances d≥2. Implementing such Hamiltonian distances requires multiple nonlinear interactions and control fields, rendering these schemes experimentally challenging. Here, we propose a bosonic code for approximate AQEC by relaxing the Knill-Laflamme conditions. Using reinforcement learning (RL), we identify the optimal bosonic set of code words (denoted here by RL code), which, surprisingly, is composed of the Fock states |2⟩ and |4⟩. As we show, the RL code, despite its approximate nature, successfully suppresses single-photon loss, reducing it to an effective dephasing process that well surpasses the break-even threshold. It may thus provide a valuable building block toward full error protection. The error-correcting Hamiltonian, which includes ancilla systems that emulate the engineered dissipation, is entirely based on the Hamiltonian distance d=1, significantly reducing model complexity. Single-qubit gates are implemented in the RL code with a maximum distance d_{g}=2.
Bosonic quantum error correction represents a route towards significant hardware overhead reduction for fault-tolerant quantum computation. However, controlling quantum harmonic oscillators that encode the quantum information comes with its own challenges. In many platforms such as superconducting circuits and trapped ions, the bosonic degree of freedom is controlled by an ancillary qubit whose decay during a qubit-oscillator gate propagates to the oscillator as a continuous error. Such errors generally lie beyond the scope of errors that the bosonic code is capable of correcting. We introduce the continuous-variable flag: an auxiliary oscillator coupled to the ancilla whose phase-space position encodes the continuous error corrupting the storage mode. After the gate, a heterodyne measurement of the flag estimates this continuous-variable error and a subsequent feedback control undoes it up to a bosonic code stabilizer. The scheme requires no new ingredients, as the flag is driven by the same dispersive coupling, displacements and rotations that implement the gates it is supposed to protect. We construct sequences protecting conditional rotations to all orders in ancilla decay with one flag, and conditional displacements to first order with one flag and to all orders with two. Simulations with realistic circuit-QED parameters predict more than three orders of magnitude fewer logical errors for the parity measurement of a four-component cat code, and a finite-energy GKP logical lifetime near its noiseless-ancilla bound. By discretizing continuous-variable errors, the flags introduced in this work are a useful tool for any hybrid oscillator-qubit processor, and open the route towards fault-tolerant simulation and computation with bosonic modes.
Abstract Bosonic quantum error correcting codes are primarily designed to protect against single-photon loss. To correct for this type of error, one can encode the logical qubit in code spaces with a definite photon parity, such as cat codes or binomial codes. Error correction requires a recovery operation that maps the error states—which have opposite parity—back onto the code space. Here, we realize a collection of photon-number-selective, simultaneous photon addition operations on a bosonic mode, a microwave cavity, assisted by a superconducting qubit. These operations are implemented as two-photon transitions that excite the cavity and the qubit at the same time. The additional degree of freedom of the qubit makes it possible to implement a coherent, unidirectional mapping between spaces of opposite photon parity. We present the successful experimental implementation of the drives and the phase control they enable on superpositions of Fock states. The presented technique, when supplemented with qubit reset, is suitable for autonomous quantum error correction in bosonic systems and, more generally, opens the possibility to realize a range of non-unitary transformations on a bosonic mode.
We propose a novel measurement-free scheme for stabilizing a spin-oscillator hybrid qubit via autonomous quantum error correction. The engineered Lindbladian renders the code space into an attractive steady-state subspace, realized by coupling the storage mode to a rapidly cooled bath through a controlled beam-splitter and spin-dependent displacement interactions. The continuous variable-discrete variable hybrid approach to autonomous quantum error correction preserves the hardware efficiency of conventional dissipation engineering while simplifying the required system-bath coupling. The construction is compatible with simple logical gates and leverages primitives already demonstrated in experimental platforms, such as trapped-ion systems, suggesting a practical route to hardware-efficient, noise-biased logical qubits without repeated syndrome measurements and feedforward.
Large-scale quantum computers will inevitably need quantum error correction to protect information against decoherence. Traditional error correction typically requires many qubits, along with high-efficiency error syndrome measurement and real-time feedback. Autonomous quantum error correction instead uses steady-state bath engineering to perform the correction in a hardware-efficient manner. In this work, we develop a new autonomous quantum error correction scheme that actively corrects single-photon loss and passively suppresses low-frequency dephasing, and we demonstrate an important experimental step towards its full implementation with transmons. Compared to uncorrected encoding, improvements are experimentally witnessed for the logical zero, one, and superposition states. Our results show the potential of implementing hardware-efficient autonomous quantum error correction to enhance the reliability of a transmon-based quantum information processor.