Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2203.00329 · Frontiers in Photonics

Superradiance of Spin Defects in Silicon Carbide for Maser Applications

Andreas Gottscholl, Maximilian Wagenhöfer, Manuel Klimmer, Selina Scherbel, Christian Kasper, Valentin Baianov, Georgy V. Astakhov, Vladimir Dyakonov, Andreas Sperlich

Published May 16, 2022• 14 citations
arXivHTMLPDF

Abstract

Masers as telecommunication amplifiers have been known for decades, yet their application is strongly limited due to extreme operating conditions requiring vacuum techniques and cryogenic temperatures. Recently, a new generation of masers has been invented based on optically pumped spin states in pentacene and diamond. In this study, we pave the way for masers based on spin S = 3/2 silicon vacancy (VSi) defects in silicon carbide (SiC) to overcome the microwave generation threshold and discuss the advantages of this highly developed spin hosting material. To achieve population inversion, we optically pump the VSi into their mS = ±1/2 spin sub-states and additionally tune the Zeeman energy splitting by applying an external magnetic field. In this way, the prerequisites for stimulated emission by means of resonant microwaves in the 10 GHz range are fulfilled. On the way to realising a maser, we were able to systematically solve a series of subtasks that improved the underlying relevant physical parameters of the SiC samples. Among others, we investigated the pump efficiency as a function of the optical excitation wavelength and the angle between the magnetic field and the defect symmetry axis in order to boost the population inversion factor, a key figure of merit for the targeted microwave oscillator. Furthermore, we developed a high-Q sapphire microwave resonator (Q ≈ 104–105) with which we find superradiant stimulated microwave emission. In summary, SiC with optimized spin defect density and thus spin relaxation rates is well on its way of becoming a suitable maser gain material with wide-ranging applications.

DOI
10.3389/fphot.2022.886354

Related papers

Highly Efficient Optical Pumping of Spin Defects in Silicon Carbide for Stimulated Microwave Emission

M. Fischer, Andreas Sperlich, Hannes Kraus +3 more

Microwaves (MWs) are at the heart of many technologies, $e.g.$ for communication, timekeeping, remote sensing, and quantum information processing. Masers can boost faint MW signals quite nicely, but not under real-world conditions. The authors demonstrate efficient population inversion of optically pumped vacancy-related spins in SiC, at room temperature, and find realistic operating conditions for a SiC maser to serve as a continuous-wave amplifier. These spins can also be coherently coupled to superconducting cavities efficiently at cryogenic temperatures. These findings suggest this SiC system as a promising platform for MW photonics and quantum electronics.

arXiv:1709.00052•Physical Review Applied•May 4, 2018•31 citations

Quantum theory of the diamond maser: Stimulated and superradiant emission

Christoph W. Zollitsch, Jonathan Breeze

We present a quantum theory of diamond masers operating at any temperature using a cavity quantum electrodynamical framework. Special attention is paid to the recently demonstrated room-temperature solid-state masers based on nitrogen-vacancy (NV) defect centers in diamond, but the model can easily be modified for other photoexcited chromophores such as pentacene-doped paraterphenyl, vacancies in silicon-carbide or boron nitride. We show that the eight energy levels involved in the optically pumped NV center polarization process can be mapped to a simple pumped two-level-system. We then derive simple analytical expressions for the optical pump threshold condition for masing as well as the steady-state microwave output power which can be used to design and predict maser performance. Finally, we investigate second-order correlations and find that typical diamond masers operate in an intermediate regime between the good and bad cavity limits where photon emission is driven by both stimulated and superradiant processes.

Physical Review A•May 14, 2025•3 citations

Room-temperature inversionless diamond nitrogen-vacancy electronic spin maser

Ali Fawaz, Sarath Raman Nair

We propose a method to create a room-temperature maser operating at approximately 2.9~GHz frequency using an ensemble of negatively charged nitrogen-vacancy electronic spins (NV) in diamond, without requiring population inversion. Our method considers a DC magnetic field of a few milli-Tesla (mT) applied along the perpendicular direction of an ensemble of NV spins aligned along a common axis. This perpendicular magnetic-field creates superposition states of $|m_{\mathrm{s}}=-1\rangle$ and $|m_{\mathrm{s}}=+1\rangle$ of the NV spin's ground state triplet levels and thereby makes it possible to drive all three transitions in the NV spin ground state. We model the system by including optical pumping of the NV spins, near-resonant driving of two transitions, and coupling the third transition to a near-resonant microwave resonator. Numerical estimates using experimentally realizable parameters show that inversionless masing can be achieved inside the microwave resonator using our method. As an application, we show that the output intensity of an inversionless maser ($1.1\times10^{14}$ spins) can be used for magnetic field sensing with a DC sensitivity on the order of a hundred pT/$\sqrt{\mathrm{Hz}}$. Our study opens a new direction in room-temperature diamond NV maser devices for quantum technological applications without the requirement of a strong bias magnetic field, as in conventional NV diamond masers.

quant-pharXiv:2607.07124•Jul 9, 2026•0 citations

Exploring the spin dynamics of a room-temperature diamond maser using an extended rate equation model

Yongqiang Wen, Phil Diggle, Neil McN. Alford +1 more

Masers—the microwave analog of lasers—are coherent microwave sources that can act as oscillators or quantum-limited amplifiers. Masers have historically required high vacuum and cryogenic temperatures to operate, but recently, masers based on diamond have been demonstrated to operate at room temperature and pressure, opening a route to new applications as ultra-low noise microwave amplifiers. For these new applications to become feasible at a mass scale, it is important to optimize diamond masers by minimizing their size and maximizing the power of signals that can be amplified. Here, we develop and numerically solve an extended rate equation model to present a detailed phenomenology of masing dynamics and determine the optimal properties required for the copper cavity, dielectric resonator, and gain medium in order to develop portable maser devices. We conclude by suggesting how the material parameters of the diamond gain media and dielectric resonators used in diamond masers can be optimized, and how rate equation models could be further developed to incorporate the effects of temperature and nitrogen concentration on spin lifetimes.

arXiv:2304.03217•Journal of Applied Physics•Nov 15, 2023•1 citation

Maser threshold characterization by resonator Q-factor tuning

Christoph W. Zollitsch, Stefan Ruloff, Yan Fett +4 more

Abstract Whereas the laser is nowadays an ubiquitous technology, applications for its microwave analog, the maser, remain highly specialized, despite the excellent low-noise microwave amplification properties. The widespread application of masers is typically limited by the need of cryogenic temperatures. The recent realization of a continuous-wave room-temperature maser, using NV− centers in diamond, is a first step towards establishing the maser as a potential platform for microwave research and development, yet its design is far from optimal. Here, we design and construct an optimized setup able to characterize the operating space of a maser using NV− centers. We focus on the interplay of two key parameters for emission of microwave photons: the quality factor of the microwave resonator and the degree of spin level-inversion. We characterize the performance of the maser as a function of these two parameters, identifying the parameter space of operation and highlighting the requirements for maximal continuous microwave emission.

arXiv:2302.10811•Communications Physics•Oct 14, 2023•11 citations

Proposal for a room-temperature diamond maser

L. Jin, Matthias Pfender, Nabeel Aslam +4 more

The application of masers is limited by its demanding working conditions (high vacuum or low temperature). A room-temperature solid-state maser is highly desirable, but the lifetimes of emitters (electron spins) in solids at room temperature are usually too short (∼ns) for population inversion. Masing from pentacene spins in p-terphenyl crystals, which have a long spin lifetime (∼0.1 ms), has been demonstrated. This maser, however, operates only in the pulsed mode. Here we propose a room-temperature maser based on nitrogen-vacancy centres in diamond, which features the longest known solid-state spin lifetime (∼5 ms) at room temperature, high optical pumping efficiency (∼10(6) s(-1)) and material stability. Our numerical simulation demonstrates that a maser with a coherence time of approximately minutes is feasible under readily accessible conditions (cavity Q-factor ∼5 × 10(4), diamond size ∼3 × 3 × 0.5 mm(3) and pump power <10 W). A room-temperature diamond maser may facilitate a broad range of microwave technologies.

arXiv:1509.07909•Nature Communications•Sep 23, 2015•85 citations
Masers as telecommunication amplifiers have been known for decades, yet their application is strongly limited due to extreme operating conditions requiring vacuum techniques and cryogenic temperatures. Recently, a new generation of masers has been invented based on optically pumped spin states in pentacene and diamond. In this study, we pave the way for masers based on spin S = 3/2 silicon vacancy (VSi) defects in silicon carbide (SiC) to overcome the microwave generation threshold and discuss the advantages of this highly developed spin hosting material. To achieve population inversion, we optically pump the VSi into their mS = ±1/2 spin sub-states and additionally tune the Zeeman energy splitting by applying an external magnetic field. In this way, the prerequisites for stimulated emission by means of resonant microwaves in the 10 GHz range are fulfilled. On the way to realising a maser, we were able to systematically solve a series of subtasks that improved the underlying relevant physical parameters of the SiC samples. Among others, we investigated the pump efficiency as a function of the optical excitation wavelength and the angle between the magnetic field and the defect symmetry axis in order to boost the population inversion factor, a key figure of merit for the targeted microwave oscillator. Furthermore, we developed a high-Q sapphire microwave resonator (Q ≈ 104–105) with which we find superradiant stimulated microwave emission. In summary, SiC with optimized spin defect density and thus spin relaxation rates is well on its way of becoming a suitable maser gain material with wide-ranging applications.
Microwaves (MWs) are at the heart of many technologies, e.g.e.g.e.g. for communication, timekeeping, remote sensing, and quantum information processing. Masers can boost faint MW signals quite nicely, but not under real-world conditions. The authors demonstrate efficient population inversion of optically pumped vacancy-related spins in SiC, at room temperature, and find realistic operating conditions for a SiC maser to serve as a continuous-wave amplifier. These spins can also be coherently coupled to superconducting cavities efficiently at cryogenic temperatures. These findings suggest this SiC system as a promising platform for MW photonics and quantum electronics.
We present a quantum theory of diamond masers operating at any temperature using a cavity quantum electrodynamical framework. Special attention is paid to the recently demonstrated room-temperature solid-state masers based on nitrogen-vacancy (NV) defect centers in diamond, but the model can easily be modified for other photoexcited chromophores such as pentacene-doped paraterphenyl, vacancies in silicon-carbide or boron nitride. We show that the eight energy levels involved in the optically pumped NV center polarization process can be mapped to a simple pumped two-level-system. We then derive simple analytical expressions for the optical pump threshold condition for masing as well as the steady-state microwave output power which can be used to design and predict maser performance. Finally, we investigate second-order correlations and find that typical diamond masers operate in an intermediate regime between the good and bad cavity limits where photon emission is driven by both stimulated and superradiant processes.
We propose a method to create a room-temperature maser operating at approximately 2.9~GHz frequency using an ensemble of negatively charged nitrogen-vacancy electronic spins (NV) in diamond, without requiring population inversion. Our method considers a DC magnetic field of a few milli-Tesla (mT) applied along the perpendicular direction of an ensemble of NV spins aligned along a common axis. This perpendicular magnetic-field creates superposition states of ∣ms=−1⟩|m_{\mathrm{s}}=-1\rangle∣ms​=−1⟩ and ∣ms=+1⟩|m_{\mathrm{s}}=+1\rangle∣ms​=+1⟩ of the NV spin's ground state triplet levels and thereby makes it possible to drive all three transitions in the NV spin ground state. We model the system by including optical pumping of the NV spins, near-resonant driving of two transitions, and coupling the third transition to a near-resonant microwave resonator. Numerical estimates using experimentally realizable parameters show that inversionless masing can be achieved inside the microwave resonator using our method. As an application, we show that the output intensity of an inversionless maser (1.1×10141.1\times10^{14}1.1×1014 spins) can be used for magnetic field sensing with a DC sensitivity on the order of a hundred pT/Hz\sqrt{\mathrm{Hz}}Hz​. Our study opens a new direction in room-temperature diamond NV maser devices for quantum technological applications without the requirement of a strong bias magnetic field, as in conventional NV diamond masers.
Masers—the microwave analog of lasers—are coherent microwave sources that can act as oscillators or quantum-limited amplifiers. Masers have historically required high vacuum and cryogenic temperatures to operate, but recently, masers based on diamond have been demonstrated to operate at room temperature and pressure, opening a route to new applications as ultra-low noise microwave amplifiers. For these new applications to become feasible at a mass scale, it is important to optimize diamond masers by minimizing their size and maximizing the power of signals that can be amplified. Here, we develop and numerically solve an extended rate equation model to present a detailed phenomenology of masing dynamics and determine the optimal properties required for the copper cavity, dielectric resonator, and gain medium in order to develop portable maser devices. We conclude by suggesting how the material parameters of the diamond gain media and dielectric resonators used in diamond masers can be optimized, and how rate equation models could be further developed to incorporate the effects of temperature and nitrogen concentration on spin lifetimes.
Abstract Whereas the laser is nowadays an ubiquitous technology, applications for its microwave analog, the maser, remain highly specialized, despite the excellent low-noise microwave amplification properties. The widespread application of masers is typically limited by the need of cryogenic temperatures. The recent realization of a continuous-wave room-temperature maser, using NV− centers in diamond, is a first step towards establishing the maser as a potential platform for microwave research and development, yet its design is far from optimal. Here, we design and construct an optimized setup able to characterize the operating space of a maser using NV− centers. We focus on the interplay of two key parameters for emission of microwave photons: the quality factor of the microwave resonator and the degree of spin level-inversion. We characterize the performance of the maser as a function of these two parameters, identifying the parameter space of operation and highlighting the requirements for maximal continuous microwave emission.
The application of masers is limited by its demanding working conditions (high vacuum or low temperature). A room-temperature solid-state maser is highly desirable, but the lifetimes of emitters (electron spins) in solids at room temperature are usually too short (∼ns) for population inversion. Masing from pentacene spins in p-terphenyl crystals, which have a long spin lifetime (∼0.1 ms), has been demonstrated. This maser, however, operates only in the pulsed mode. Here we propose a room-temperature maser based on nitrogen-vacancy centres in diamond, which features the longest known solid-state spin lifetime (∼5 ms) at room temperature, high optical pumping efficiency (∼10(6) s(-1)) and material stability. Our numerical simulation demonstrates that a maser with a coherence time of approximately minutes is feasible under readily accessible conditions (cavity Q-factor ∼5 × 10(4), diamond size ∼3 × 3 × 0.5 mm(3) and pump power <10 W). A room-temperature diamond maser may facilitate a broad range of microwave technologies.