The application of masers is limited by its demanding working conditions (high vacuum or low temperature). A room-temperature solid-state maser is highly desirable, but the lifetimes of emitters (electron spins) in solids at room temperature are usually too short (∼ns) for population inversion. Masing from pentacene spins in p-terphenyl crystals, which have a long spin lifetime (∼0.1 ms), has been demonstrated. This maser, however, operates only in the pulsed mode. Here we propose a room-temperature maser based on nitrogen-vacancy centres in diamond, which features the longest known solid-state spin lifetime (∼5 ms) at room temperature, high optical pumping efficiency (∼10(6) s(-1)) and material stability. Our numerical simulation demonstrates that a maser with a coherence time of approximately minutes is feasible under readily accessible conditions (cavity Q-factor ∼5 × 10(4), diamond size ∼3 × 3 × 0.5 mm(3) and pump power <10 W). A room-temperature diamond maser may facilitate a broad range of microwave technologies.
The application of masers is limited by its demanding working conditions (high vacuum or low temperature). A room-temperature solid-state maser is highly desirable, but the lifetimes of emitters (electron spins) in solids at room temperature are usually too short (∼ns) for population inversion. Masing from pentacene spins in p-terphenyl crystals, which have a long spin lifetime (∼0.1 ms), has been demonstrated. This maser, however, operates only in the pulsed mode. Here we propose a room-temperature maser based on nitrogen-vacancy centres in diamond, which features the longest known solid-state spin lifetime (∼5 ms) at room temperature, high optical pumping efficiency (∼10(6) s(-1)) and material stability. Our numerical simulation demonstrates that a maser with a coherence time of approximately minutes is feasible under readily accessible conditions (cavity Q-factor ∼5 × 10(4), diamond size ∼3 × 3 × 0.5 mm(3) and pump power <10 W). A room-temperature diamond maser may facilitate a broad range of microwave technologies.
The first solid-state masers to operate at room-temperature and ambient air-pressure were recently demonstrated using optically pumped spin-triplet states as the gain medium. In this Perspective, we briefly review the previous state-of-the-art in cryogenic solid-state masers and then discuss the development of the room-temperature solid-state maser: from the organic pentacene pulsed maser to the diamond nitrogen-vacancy continuous-wave maser. We characterize the operation of these masers as coherent microwave sources and ultra-low noise amplifiers before outlining how they can be adapted to act as model systems in which to explore room-temperature cavity quantum electrodynamics. After discussing challenges facing current embodiments of the room-temperature solid-state maser, we explore how they might be addressed or by-passed altogether through the development of alternative materials and masing mechanisms. Finally, we speculate on how the advent of masers that can operate in ambient conditions might lead to novel applications in metrology and quantum technologies.
Masers—the microwave analog of lasers—are coherent microwave sources that can act as oscillators or quantum-limited amplifiers. Masers have historically required high vacuum and cryogenic temperatures to operate, but recently, masers based on diamond have been demonstrated to operate at room temperature and pressure, opening a route to new applications as ultra-low noise microwave amplifiers. For these new applications to become feasible at a mass scale, it is important to optimize diamond masers by minimizing their size and maximizing the power of signals that can be amplified. Here, we develop and numerically solve an extended rate equation model to present a detailed phenomenology of masing dynamics and determine the optimal properties required for the copper cavity, dielectric resonator, and gain medium in order to develop portable maser devices. We conclude by suggesting how the material parameters of the diamond gain media and dielectric resonators used in diamond masers can be optimized, and how rate equation models could be further developed to incorporate the effects of temperature and nitrogen concentration on spin lifetimes.
We propose a method to create a room-temperature maser operating at approximately 2.9~GHz frequency using an ensemble of negatively charged nitrogen-vacancy electronic spins (NV) in diamond, without requiring population inversion. Our method considers a DC magnetic field of a few milli-Tesla (mT) applied along the perpendicular direction of an ensemble of NV spins aligned along a common axis. This perpendicular magnetic-field creates superposition states of ∣ms=−1⟩ and ∣ms=+1⟩ of the NV spin's ground state triplet levels and thereby makes it possible to drive all three transitions in the NV spin ground state. We model the system by including optical pumping of the NV spins, near-resonant driving of two transitions, and coupling the third transition to a near-resonant microwave resonator. Numerical estimates using experimentally realizable parameters show that inversionless masing can be achieved inside the microwave resonator using our method. As an application, we show that the output intensity of an inversionless maser (1.1×1014 spins) can be used for magnetic field sensing with a DC sensitivity on the order of a hundred pT/Hz. Our study opens a new direction in room-temperature diamond NV maser devices for quantum technological applications without the requirement of a strong bias magnetic field, as in conventional NV diamond masers.
Solid-state masers have recently demonstrated room-temperature microwave amplification with quantum-level coherence, enabling advances in spin-based communication, metrology, and sensing technologies. This work presents an integrated experimental framework uniting our developments in L-band masing, free-space microwave propagation, and LED-Luminescent-Concentrator (LED-LC) pumped quantum sensing. Pentacene- and diazapentacene-doped p-terphenyl crystals are characterised under laser- and LED-based excitation to evaluate masing gain, coherence lifetime, and optical-pump efficiency. The L-band configuration achieves milliwatt-level coherent emission with sub-MHz linewidths, while free-space transmission confirms stable spectral coherence over tens of centimetres. The LED-LC platform demonstrates comparable masing under ambient conditions using compact, low-power optical excitation, establishing a pathway to practical, room-temperature quantum sensors. Correlating optical, spin-dynamic, and microwave performance metrics define a materials-to-device design space for scalable solid-state masers that combine high-gain amplification with coherent spin-based sensing. This framework complements parallel work within our group on NV–diamond masers, collectively advancing coherent spin-photon platforms for room-temperature quantum technologies.
We present a quantum theory of diamond masers operating at any temperature using a cavity quantum electrodynamical framework. Special attention is paid to the recently demonstrated room-temperature solid-state masers based on nitrogen-vacancy (NV) defect centers in diamond, but the model can easily be modified for other photoexcited chromophores such as pentacene-doped paraterphenyl, vacancies in silicon-carbide or boron nitride. We show that the eight energy levels involved in the optically pumped NV center polarization process can be mapped to a simple pumped two-level-system. We then derive simple analytical expressions for the optical pump threshold condition for masing as well as the steady-state microwave output power which can be used to design and predict maser performance. Finally, we investigate second-order correlations and find that typical diamond masers operate in an intermediate regime between the good and bad cavity limits where photon emission is driven by both stimulated and superradiant processes.
Masers, the microwave analog of lasers, are an important class of devices that can be used to generate highly coherent and stable microwave signals as well as quantum-limited amplification of microwave photons. Recently, the interest in such devices has increased, probably owing to experiments demonstrating the successful operation at room temperature of solid-state maser employing defects in diamond. These defects, called nitrogen vacancy (NV) centers, are comprised of a negatively charged substitutional nitrogen that replaces one of the diamond crystal lattice’s carbons and a vacancy adjacent to the excluded carbon atom. The performance of diamond-based masers, in terms of gain, noise, bandwidth, frequency of operation, and saturation, greatly depends upon the specific diamond crystal composition and its geometry in the respective microwave device. The currently available data on these issues are scarce and sometimes conflicting. It is, therefore, important to provide additional experimental data, complemented by theoretical analysis, to further optimize the required diamond material and thus enhance the capabilities of diamond-based maser technology. The latter is currently limited to operate only as an oscillator at very small bandwidths, with low saturation power. Here, we provide experimental results on a set of important parameters affecting diamond maser operation, such as the population and linewidth of the electron spin energy levels of the NVs under light illumination, as well as their relaxation times for several different diamond material compositions. These results are then used to point out which diamond material compositions and crystal geometry may be best suitable for maser-type applications.