Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2201.13431 · Optics Express

Compact plug and play optical frequency reference device based on Doppler-free spectroscopy of rubidium vapor

Aaron Strangfeld, Benjamin Wiegand, Julien Kluge, Matthias Schoch, Markus Krutzik

Published Mar 21, 2022• 22 citations
arXivHTMLPDF

Abstract

Compactness, robustness and autonomy of optical frequency references are prerequisites for reliable operation in mobile systems, on ground as well as in space. We present a standalone plug and play optical frequency reference device based on frequency modulation spectroscopy of the D2-transition in rubidium at 780 nm. After a single button press the hand-sized laser module, based on the micro-integrated laser-optical bench described in [ J. Opt. Soc. Am. B 38 , 1885 ( 2021 ) 10.1364/JOSAB.420875 ], works fully autonomous and generates 6 mW of frequency stabilized light with a relative frequency instability of 1.4×10−12 at 1 s and below 10−11 at 105 s averaging time. We describe the design of the device, investigate the thermal characteristics affecting the output frequency and demonstrate short-term frequency stability improvement by a Bayesian optimizer varying the modulation parameters.

DOI
10.1364/oe.453942

Related papers

Miniaturized optical frequency reference for next-generation portable optical clocks

Vincent N. Maurice, Zachary L. Newman, Susannah M. Dickerson +7 more

Optical frequency standards, or lasers stabilized to atomic or molecular transitions, are widely used in length metrology and laser ranging, provide a backbone for optical communications and lie at the heart of next-generation optical atomic clocks. Here we demonstrate a compact, low-power optical frequency reference based on the Doppler-free, two-photon transition in rubidium-87 at 778 nm implemented on a micro-optics breadboard. Our optical reference achieves a fractional frequency instability of 2.9×10−12/ τ for averaging times τ less than 103 s, has a volume of ≈35 cm3 and operates on ≈450 mW of electrical power. The advanced optical integration presented here demonstrates a key step towards the development of compact optical clocks and the broad dissemination of SI-traceable wavelength references.

arXiv:2003.13172•Optics Express•Jul 15, 2020•77 citations

Prototype of a compact rubidium-based optical frequency reference for operation on nanosatellites

Aaron Strangfeld, Simon Kanthak, Max Schiemangk +4 more

Space-borne optical frequency references based on spectroscopy of atomic vapors may serve as an integral part of compact optical atomic clocks, which can advance global navigation systems or can be utilized for earth observation missions as part of laser systems for cold atom gradiometers. Nanosatellites offer low launch costs, multiple deployment opportunities, and short payload development cycles, enabling rapid maturation of optical frequency references and underlying key technologies in space. Toward an in-orbit demonstration on such a platform, we have developed a CubeSat-compatible prototype of an optical frequency reference based on the D2 transition in rubidium. A frequency instability of 1.7 × 10 − 12 at 1 s averaging time is achieved. The optical module occupies a volume of 35 c m 3 , weighs 73 g, and consumes 780 mW of power.

arXiv:2105.02021•Journal of the Optical Society of America B•Apr 22, 2021•29 citations

Compact 780-nm Rb optical clock

Zhendong Chen, Tianyu Liu, Ruoao Yang +9 more

We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.

arXiv:2501.01826•Physical Review Applied•Nov 24, 2025•6 citations

Note: Simultaneous modulation transfer spectroscopy on transitions of multiple atomic species for compact laser frequency reference modules

Moritz Mihm, Kai Lampmann, André Wenzlawski +1 more

We present a technique for simultaneous laser frequency stabilization on transitions of multiple atomic species with a single optical setup. The method is based on modulation transfer spectroscopy, and the signals are separated by modulating at different frequencies and electronically filtered. As a proof of concept, we demonstrate simultaneous spectroscopy of the potassium D1, D2 and rubidium D2 transitions. The technique can be extended in principle to other atomic species given the availability of optics and cells and allows the development of versatile and compact frequency reference modules.

arXiv:1806.02606•Review of Scientific Instruments•Sep 1, 2018•6 citations

Photonic chip for laser stabilization to an atomic vapor with 10−11 instability

Matthew T. Hummon, Songbai Kang, Douglas G. Bopp +8 more

Devices based on spectroscopy of atomic vapors can measure physical quantities such as magnetic fields, RF electric fields, time and length, and rotation and have applications in a broad range of fields including communications, medicine, and navigation. We present a type of photonic device that interfaces single-mode silicon nitride optical waveguides with warm atomic vapors, enabling precision spectroscopy in an extremely compact (<1  cm3) package. We perform precision spectroscopy of rubidium confined in a micro-machined, 27  mm3 volume, vapor cell using a collimated free-space 120 μm diameter laser beam derived directly from a single-mode silicon nitride waveguide. With this optical-fiber integrated photonic spectrometer, we demonstrate an optical frequency reference at 780 nm with a stability of 10−11 from 1 to 104  s. This device harnesses the benefits of both photonic integration and precision spectroscopy for the next generation of quantum sensors and devices based on atomic vapors.

Optica•Apr 10, 2018•173 citations

CubeSat frequency reference for Quantum technology mission

Sapam Ranjita Chanu, Soe Moe Thar, Aaron Strangfeld +3 more

We report on our latest progress on the ongoing development of a compact optical frequency reference for CubeSat missions in LEO. This reference will be based on Doppler free laser spectroscopy of rubidium vapor. Our simplified solution is based on frequency modulation spectroscopy using a customized, shielded 5 mm long vapor cell and a monolithic distributed feedback (DFB) laser diode on a mesoscopic breadboard setup. The electro-optical system features miniaturized optics as well as a polarization maintaining fiber coupling inside a housing with dimensions of 70 mm × 26 mm × 19 mm (38 cm³). The latter will be installed on a 90 mm × 80mm electronics board for full functionality of the system. This way, our reference constitutes a key technology for future compact, simple and robust atomic quantum technologies for nanosatellite applications.

SPIE Future Sensing Technologies•Nov 8, 2020•0 citations
Compactness, robustness and autonomy of optical frequency references are prerequisites for reliable operation in mobile systems, on ground as well as in space. We present a standalone plug and play optical frequency reference device based on frequency modulation spectroscopy of the D2-transition in rubidium at 780 nm. After a single button press the hand-sized laser module, based on the micro-integrated laser-optical bench described in [ J. Opt. Soc. Am. B 38 , 1885 ( 2021 ) 10.1364/JOSAB.420875 ], works fully autonomous and generates 6 mW of frequency stabilized light with a relative frequency instability of 1.4×10−12 at 1 s and below 10−11 at 105 s averaging time. We describe the design of the device, investigate the thermal characteristics affecting the output frequency and demonstrate short-term frequency stability improvement by a Bayesian optimizer varying the modulation parameters.
Optical frequency standards, or lasers stabilized to atomic or molecular transitions, are widely used in length metrology and laser ranging, provide a backbone for optical communications and lie at the heart of next-generation optical atomic clocks. Here we demonstrate a compact, low-power optical frequency reference based on the Doppler-free, two-photon transition in rubidium-87 at 778 nm implemented on a micro-optics breadboard. Our optical reference achieves a fractional frequency instability of 2.9×10−12/ τ for averaging times τ less than 103 s, has a volume of ≈35 cm3 and operates on ≈450 mW of electrical power. The advanced optical integration presented here demonstrates a key step towards the development of compact optical clocks and the broad dissemination of SI-traceable wavelength references.
Space-borne optical frequency references based on spectroscopy of atomic vapors may serve as an integral part of compact optical atomic clocks, which can advance global navigation systems or can be utilized for earth observation missions as part of laser systems for cold atom gradiometers. Nanosatellites offer low launch costs, multiple deployment opportunities, and short payload development cycles, enabling rapid maturation of optical frequency references and underlying key technologies in space. Toward an in-orbit demonstration on such a platform, we have developed a CubeSat-compatible prototype of an optical frequency reference based on the D2 transition in rubidium. A frequency instability of 1.7 × 10 − 12 at 1 s averaging time is achieved. The optical module occupies a volume of 35 c m 3 , weighs 73 g, and consumes 780 mW of power.
We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.
We present a technique for simultaneous laser frequency stabilization on transitions of multiple atomic species with a single optical setup. The method is based on modulation transfer spectroscopy, and the signals are separated by modulating at different frequencies and electronically filtered. As a proof of concept, we demonstrate simultaneous spectroscopy of the potassium D1, D2 and rubidium D2 transitions. The technique can be extended in principle to other atomic species given the availability of optics and cells and allows the development of versatile and compact frequency reference modules.
Devices based on spectroscopy of atomic vapors can measure physical quantities such as magnetic fields, RF electric fields, time and length, and rotation and have applications in a broad range of fields including communications, medicine, and navigation. We present a type of photonic device that interfaces single-mode silicon nitride optical waveguides with warm atomic vapors, enabling precision spectroscopy in an extremely compact (<1  cm3) package. We perform precision spectroscopy of rubidium confined in a micro-machined, 27  mm3 volume, vapor cell using a collimated free-space 120 μm diameter laser beam derived directly from a single-mode silicon nitride waveguide. With this optical-fiber integrated photonic spectrometer, we demonstrate an optical frequency reference at 780 nm with a stability of 10−11 from 1 to 104  s. This device harnesses the benefits of both photonic integration and precision spectroscopy for the next generation of quantum sensors and devices based on atomic vapors.
We report on our latest progress on the ongoing development of a compact optical frequency reference for CubeSat missions in LEO. This reference will be based on Doppler free laser spectroscopy of rubidium vapor. Our simplified solution is based on frequency modulation spectroscopy using a customized, shielded 5 mm long vapor cell and a monolithic distributed feedback (DFB) laser diode on a mesoscopic breadboard setup. The electro-optical system features miniaturized optics as well as a polarization maintaining fiber coupling inside a housing with dimensions of 70 mm × 26 mm × 19 mm (38 cm³). The latter will be installed on a 90 mm × 80mm electronics board for full functionality of the system. This way, our reference constitutes a key technology for future compact, simple and robust atomic quantum technologies for nanosatellite applications.