Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1806.02606 · Review of Scientific Instruments

Note: Simultaneous modulation transfer spectroscopy on transitions of multiple atomic species for compact laser frequency reference modules

Moritz Mihm, Kai Lampmann, André Wenzlawski, Patrick Windpassinger

Published Sep 1, 2018• 6 citations
arXivHTMLPDF

Abstract

We present a technique for simultaneous laser frequency stabilization on transitions of multiple atomic species with a single optical setup. The method is based on modulation transfer spectroscopy, and the signals are separated by modulating at different frequencies and electronically filtered. As a proof of concept, we demonstrate simultaneous spectroscopy of the potassium D1, D2 and rubidium D2 transitions. The technique can be extended in principle to other atomic species given the availability of optics and cells and allows the development of versatile and compact frequency reference modules.

DOI
10.1063/1.5041782

Related papers

Single-atomic-ensemble dual-wavelength optical frequency standard

Jie Miao, Jingming Chen, Deshui Yu +3 more

We demonstrate a dual-wavelength optical frequency standard based on the dual-optical-transition modulation transfer spectroscopy (DOT-MTS) between different quantum transitions of the rubidium D1 (795 nm) and D2 (780 nm) lines. In a single rubidium atomic ensemble, modulation frequency sidebands from the 780 nm pump beam are simultaneously transferred to both the 780 and 795 nm probe lasers. The DOT-MTS enables the simultaneous stabilization of 780 and 795 nm lasers on a single vapor cell. Both lasers exhibit a frequency instability in the low 10 −14 range at 1 s of averaging, as estimated from the residual error signal. A theoretical model is developed based on the V-type atomic level structure to illustrate the dual-wavelength spectroscopy. This approach can be extended to develop a multi-wavelength optical frequency standard within a single atomic ensemble, broadening its applicability in fields such as precision metrology, Rydberg atoms, wavelength standards, optical networks, and beyond.

arXiv:2411.02107•Photonics Research•Jan 10, 2025•10 citations

Dual-frequency Doppler-free spectroscopy for simultaneous laser stabilization in compact atomic physics experiments

Nathan Cooper, Somaya Madkhaly, David H. Johnson +3 more

Vapor-cell spectroscopy is an essential technique in many fields and is particularly relevant for quantum technologies. Most atom- and ion-trapping experiments rely on simultaneous spectroscopy of two atomic transitions, employing a separate apparatus for each transition. We demonstrate simultaneous spectroscopy on two atomic transitions, within a single apparatus, using spatially overlapped beams from two independent lasers. This method enables compact setups and offers superior spectroscopic performance, leading to sharper spectroscopy peaks, stronger absorption signals, and superior laser stability. Doppler-free locking features become accessible over a frequency range several hundred megahertz wider than for standard saturated absorption spectroscopy. Exploring the full parameter space associated with dual-frequency spectroscopy reveals a latticelike structure of sharp resonance features, which enhances experimental versatility by allowing laser frequency stabilization within a wide manifold of locations in two-dimensional frequency space. We present data for $^{133}\mathrm{Cs}$ and $^{85}\mathrm{Rb}$ and compare our results to a theoretical model. Employing the technique for frequency stabilization close to the ${D}_{2}$ line of $^{85}\mathrm{Rb}$ results in an improvement in frequency stability by a factor typically between 2 and 3 for averaging times of up to 1 s. The technique will advance portable quantum technologies and facilitate high-precision measurements.

arXiv:2106.11014•Physical Review A•Jul 31, 2023•5 citations

Modulation transfer spectroscopy in atomic rubidium

Daniel McCarron, S. A. King, Simon L. Cornish

We report modulation transfer spectroscopy on the D2 transitions in 85 Rb and 87 Rb using a simple home-built electro-optic modulator (EOM). We show that both the gradient and amplitude of modulation transfer spectroscopy signals, for the 87 Rb F = 2 → F ' = 3 and the 85 Rb F = 3 → F ' = 4 transitions, can be significantly enhanced by expanding the beams, improving the signals for laser frequency stabilization. The signal gradient for these transitions is increased by a factor of 3 and the peak to peak amplitude was increased by a factor of 2. The modulation transfer signal for the 85 Rb F = 2 → F ' transitions is also presented to highlight how this technique can generate a single, clear line for laser frequency stabilization even in cases where there are a number of closely spaced hyperfine transitions.

arXiv:0805.2708•Measurement Science and Technology•Aug 19, 2008•225 citations

Modulation transfer spectroscopy for D1 transition line of rubidium

Bin Wu, Yin Zhou, Kanxing Weng +5 more

Modulation transfer spectroscopy (MTS) is widely used in an optical laboratory for laser frequency stabilization. There have been many theoretical and experimental papers on this spectroscopic method. However, most of the works focus on the cycling transitions like the D2 line of rubidium. In this paper, the MTS for noncycling transitions is investigated. We consider the D1 line of rubidium whose modulation transfer spectrum has been determined and compared to the polarization spectrum. It is found that the slope of the modulation transfer signal is sharper than the polarization spectrum. The performance of laser frequency locking based on the MTS method is better than that of the polarization spectroscopy method. The dependence of the signal amplitude on the temperature of the vapor cell was analyzed, and the high signal-to-noise-ratio spectra are achieved for D1 open transitions. The obtained results provide an effective spectroscopic method for the robust frequency locking of a laser at a wavelength of 795 nm.

Journal of the Optical Society of America B•Oct 8, 2018•31 citations

Frequency Modulation Spectroscopy and Modulation Transfer Spectroscopy for Laser Stabilization to Rubidium Atomic Resonances

Jinni Wu, Ningxuan Zheng, Wenhui Li

We make a detailed comparison of frequency modulation spectroscopy (FMS) and modulation transfer spectroscopy (MTS) and of their applications in stabilizing laser frequency. In both FMS and MTS, intensity modulations of probe beam are observed in saturated absorption spectroscopy of 87Rb atoms. However, the two modulation profiles appear different due to their distinct origins. Demodulation gives rise to frequency discrimination spectra, which can serve as error signals for frequency locking. The optimal error signal of FMS has a larger linear slope but also a slanted baseline, in contrast to that of MTS. We apply FMS and MTS to stabilize two 780 nm external cavity diode lasers to D2 lines of 87Rb atoms. We measure laser linewidth and stability using beat notes of two independently locked lasers. A laser linewidth as narrow as 12.9 kHz is achieved in FMS locking, compared to 70.8 kHz in MTS locking. A laser stability at the level of 10−12 is reached in both schemes. Nevertheless, FMS locking offers a better short-term stability, whereas MTS locking yields a smaller long-term drift. Our investigation of FMS and MTS would be valuable for making a choice of these spectroscopy techniques for laser stabilization as well as other relevant applications.

Photonics•Oct 21, 2026•0 citations

Dual-Optical-Transition Modulation Transfer Spectroscopy Based on Ladder-Type Energy Structure

Jingming Chen, Jie Miao, Yuanchen Qi +4 more

Modulation transfer spectroscopy (MTS) provides a high-resolution, Doppler-free method for laser frequency stabilization, offering excellent signal-to-noise ratio and robustness, particularly suited for compact thermal atomic clocks. Extending this approach, dual-optical-transition MTS (DOT-MTS) enables the simultaneous stabilization of two optical transitions within a single atomic ensemble, paving the way for multi-wavelength frequency references in integrated systems. Despite its potential, DOT-MTS remains relatively unexplored. In this work, we demonstrate DOT-MTS in a ladder-type configuration using87Rb atoms. Both optical-optical double resonance (OODR) and double-resonance optical pumping (DROP) signals are clearly observed. Through systematic optimization of experimental parameters, the system achieves a self-evaluated short-term frequency stability at the 1E-13 level. These results demonstrate the feasibility of DOT-MTS as a high-performance, compact frequency reference and open a promising avenue toward the development of portable optical clocks.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 12, 2025•0 citations
We present a technique for simultaneous laser frequency stabilization on transitions of multiple atomic species with a single optical setup. The method is based on modulation transfer spectroscopy, and the signals are separated by modulating at different frequencies and electronically filtered. As a proof of concept, we demonstrate simultaneous spectroscopy of the potassium D1, D2 and rubidium D2 transitions. The technique can be extended in principle to other atomic species given the availability of optics and cells and allows the development of versatile and compact frequency reference modules.
We demonstrate a dual-wavelength optical frequency standard based on the dual-optical-transition modulation transfer spectroscopy (DOT-MTS) between different quantum transitions of the rubidium D1 (795 nm) and D2 (780 nm) lines. In a single rubidium atomic ensemble, modulation frequency sidebands from the 780 nm pump beam are simultaneously transferred to both the 780 and 795 nm probe lasers. The DOT-MTS enables the simultaneous stabilization of 780 and 795 nm lasers on a single vapor cell. Both lasers exhibit a frequency instability in the low 10 −14 range at 1 s of averaging, as estimated from the residual error signal. A theoretical model is developed based on the V-type atomic level structure to illustrate the dual-wavelength spectroscopy. This approach can be extended to develop a multi-wavelength optical frequency standard within a single atomic ensemble, broadening its applicability in fields such as precision metrology, Rydberg atoms, wavelength standards, optical networks, and beyond.
Vapor-cell spectroscopy is an essential technique in many fields and is particularly relevant for quantum technologies. Most atom- and ion-trapping experiments rely on simultaneous spectroscopy of two atomic transitions, employing a separate apparatus for each transition. We demonstrate simultaneous spectroscopy on two atomic transitions, within a single apparatus, using spatially overlapped beams from two independent lasers. This method enables compact setups and offers superior spectroscopic performance, leading to sharper spectroscopy peaks, stronger absorption signals, and superior laser stability. Doppler-free locking features become accessible over a frequency range several hundred megahertz wider than for standard saturated absorption spectroscopy. Exploring the full parameter space associated with dual-frequency spectroscopy reveals a latticelike structure of sharp resonance features, which enhances experimental versatility by allowing laser frequency stabilization within a wide manifold of locations in two-dimensional frequency space. We present data for 133Cs^{133}\mathrm{Cs}133Cs and 85Rb^{85}\mathrm{Rb}85Rb and compare our results to a theoretical model. Employing the technique for frequency stabilization close to the D2{D}_{2}D2​ line of 85Rb^{85}\mathrm{Rb}85Rb results in an improvement in frequency stability by a factor typically between 2 and 3 for averaging times of up to 1 s. The technique will advance portable quantum technologies and facilitate high-precision measurements.
We report modulation transfer spectroscopy on the D2 transitions in 85 Rb and 87 Rb using a simple home-built electro-optic modulator (EOM). We show that both the gradient and amplitude of modulation transfer spectroscopy signals, for the 87 Rb F = 2 → F ' = 3 and the 85 Rb F = 3 → F ' = 4 transitions, can be significantly enhanced by expanding the beams, improving the signals for laser frequency stabilization. The signal gradient for these transitions is increased by a factor of 3 and the peak to peak amplitude was increased by a factor of 2. The modulation transfer signal for the 85 Rb F = 2 → F ' transitions is also presented to highlight how this technique can generate a single, clear line for laser frequency stabilization even in cases where there are a number of closely spaced hyperfine transitions.
Modulation transfer spectroscopy (MTS) is widely used in an optical laboratory for laser frequency stabilization. There have been many theoretical and experimental papers on this spectroscopic method. However, most of the works focus on the cycling transitions like the D2 line of rubidium. In this paper, the MTS for noncycling transitions is investigated. We consider the D1 line of rubidium whose modulation transfer spectrum has been determined and compared to the polarization spectrum. It is found that the slope of the modulation transfer signal is sharper than the polarization spectrum. The performance of laser frequency locking based on the MTS method is better than that of the polarization spectroscopy method. The dependence of the signal amplitude on the temperature of the vapor cell was analyzed, and the high signal-to-noise-ratio spectra are achieved for D1 open transitions. The obtained results provide an effective spectroscopic method for the robust frequency locking of a laser at a wavelength of 795 nm.
We make a detailed comparison of frequency modulation spectroscopy (FMS) and modulation transfer spectroscopy (MTS) and of their applications in stabilizing laser frequency. In both FMS and MTS, intensity modulations of probe beam are observed in saturated absorption spectroscopy of 87Rb atoms. However, the two modulation profiles appear different due to their distinct origins. Demodulation gives rise to frequency discrimination spectra, which can serve as error signals for frequency locking. The optimal error signal of FMS has a larger linear slope but also a slanted baseline, in contrast to that of MTS. We apply FMS and MTS to stabilize two 780 nm external cavity diode lasers to D2 lines of 87Rb atoms. We measure laser linewidth and stability using beat notes of two independently locked lasers. A laser linewidth as narrow as 12.9 kHz is achieved in FMS locking, compared to 70.8 kHz in MTS locking. A laser stability at the level of 10−12 is reached in both schemes. Nevertheless, FMS locking offers a better short-term stability, whereas MTS locking yields a smaller long-term drift. Our investigation of FMS and MTS would be valuable for making a choice of these spectroscopy techniques for laser stabilization as well as other relevant applications.
Modulation transfer spectroscopy (MTS) provides a high-resolution, Doppler-free method for laser frequency stabilization, offering excellent signal-to-noise ratio and robustness, particularly suited for compact thermal atomic clocks. Extending this approach, dual-optical-transition MTS (DOT-MTS) enables the simultaneous stabilization of two optical transitions within a single atomic ensemble, paving the way for multi-wavelength frequency references in integrated systems. Despite its potential, DOT-MTS remains relatively unexplored. In this work, we demonstrate DOT-MTS in a ladder-type configuration using87Rb atoms. Both optical-optical double resonance (OODR) and double-resonance optical pumping (DROP) signals are clearly observed. Through systematic optimization of experimental parameters, the system achieves a self-evaluated short-term frequency stability at the 1E-13 level. These results demonstrate the feasibility of DOT-MTS as a high-performance, compact frequency reference and open a promising avenue toward the development of portable optical clocks.