Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2201.07218

A two-qubit entangling gate based on a two-spin gadget

Rui Yang

Published Jan 15, 2022• 0 citations
arXivHTMLPDF

Abstract

The faster speed and operational convenience of two-qubit gate with flux bias control makes it an important candidate for future large-scale quantum computers based on high coherence flux qubits. Based on a properly designed two-spin gadget which has small gaps during the evolution of energy levels, we build a CNOT-equivalent gate which can reach a fidelity larger than 99.9% within 40ns. Moreover, we also use the Schrieffer-Wolff Transformation to translate the spin model Ising coefficients schedule to circuit model flux bias schedule for realistic flux qubit circuits coupled by a tunable rf-squid. The two-qubit entangling gate scheme introduced here is suitable for realizing efficient two-qubit gates in the large scale flux qubit systems dominated by inductive couplings. Comparing with the current gate-based quantum computation systems dominated by capacitive couplings, it can resolve the conflict between the speed and a high coherence.

DOI
10.48550/arxiv.2201.07218

Related papers

Tunable coupling scheme for implementing two-qubit gates on fluxonium qubits

Ilya N. Moskalenko, Ilya S. Besedin, Ilya A. Simakov +1 more

A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.

arXiv:2107.11550•Applied Physics Letters•Nov 8, 2021•40 citations

Quantum Entanglement and Controlled Logical Gates Using Coupled SQUID Flux Qubits

Zhongyuan Zhou, Shih‐I Chu, Siyuan Han

We present an approach to realize universal two-bit quantum gates using two SQUID flux qubits. In this approach the basic unit consists of two inductively coupled SQUIDs with realistic device parameters. Quantum logical gates are implemented by applying resonant microwave pulse to the qubits. This procedure is demonstrated by realizing a controlled-NOT (CNOT) gate and the maximally entangled states of the coupled qubits through highly accurate numerical solution of the time-dependent Schrodinger equation of the system. This coupling scheme is simple and can be readily extended to many-qubit circuits required for scalable quantum information processing.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•5 citations

Fast Flux Entangling Gate for Fluxonium Circuits

Yinqi Chen, Konstantin Nesterov, Vladimir Manucharyan +1 more

We analyze a high-fidelity two-qubit gate using fast flux pulses on superconducting fluxonium qubits. The gate is realized by temporarily detuning the magnetic flux through the fluxonium loop away from the half flux quantum sweet spot. We simulate dynamics of two capacitively coupled fluxoniums during the flux pulses and optimize the pulse parameters to obtain a highly accurate $\sqrt{i\mathrm{SWAP}}$-like entangling gate. We also evaluate the effect of the flux noise and qubit relaxation on the gate fidelity. Our results demonstrate that the gate error remains below ${10}^{\ensuremath{-}4}$ for a currently achievable magnitude of the flux noise and qubit relaxation time.

arXiv:2110.00632•Physical Review Applied•Sep 12, 2022•20 citations

Fast microwave-driven two-qubit gates between fluxonium qubits with a transmon coupler

Siddharth Singh, Eugene Y. Huang, Jinlun Hu +6 more

Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2$π$ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of $10^{-2}$ for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.

arXiv:2504.13718•Physical Review Applied•Oct 28, 2025•11 citations

Fast high-fidelity entangling gates for spin qubits in Si double quantum dots

F. A. Calderon-Vargas, George S. Barron, Xiu–Hao Deng +3 more

Implementing high-fidelity two-qubit gates in single-electron spin qubits in silicon double quantum dots is still a major challenge. In this work we employ analytical methods to design control pulses that generate high-fidelity entangling gates for quantum computers based on this platform. Using realistic parameters and initially assuming a noise-free environment, we present simple control pulses that generate cnot, cphase, and cz gates with average fidelities greater than 99.99% and gate times as short as 45 ns. Moreover, using the local invariants of the system's evolution operator, we show that a simple square pulse generates a cnot gate in less than 27 ns and with a fidelity greater than 99.99%. Last, we use the same analytical methods to generate two-qubit gates locally equivalent to $\sqrt{\mathrm{CNOT}}$ and $\sqrt{\mathrm{CZ}}$ that are used to implement simple two-piece pulse sequences that produce high-fidelity cnot and cz gates in the presence of low-frequency noise.

arXiv:1902.02350•Physical review. B./Physical review. B•Jul 9, 2019•35 citations

Flux Qubits and Coherent Tunable Couplings between Them

Li, Zheng

Flux qubits (also known as persistent current qubits), one kind of superconducting tunnel junction circuits, are recently demonstrated as a promising candidate to realize quantum computations.In order to do large-scale quantum information processing, it is necessary to switch on and off the couplings between individual flux qubits in the time-domain while those qubits retain coherence.This report contains two parts: one is to describe my understanding of models, fabrications and measurements for one single flux qubit; the other is to compare two proposed schemes and the corresponding experimental realizations of coherent tunable couplings between flux qubits.

•Jan 1, 2010•0 citations
The faster speed and operational convenience of two-qubit gate with flux bias control makes it an important candidate for future large-scale quantum computers based on high coherence flux qubits. Based on a properly designed two-spin gadget which has small gaps during the evolution of energy levels, we build a CNOT-equivalent gate which can reach a fidelity larger than 99.9% within 40ns. Moreover, we also use the Schrieffer-Wolff Transformation to translate the spin model Ising coefficients schedule to circuit model flux bias schedule for realistic flux qubit circuits coupled by a tunable rf-squid. The two-qubit entangling gate scheme introduced here is suitable for realizing efficient two-qubit gates in the large scale flux qubit systems dominated by inductive couplings. Comparing with the current gate-based quantum computation systems dominated by capacitive couplings, it can resolve the conflict between the speed and a high coherence.
A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.
We present an approach to realize universal two-bit quantum gates using two SQUID flux qubits. In this approach the basic unit consists of two inductively coupled SQUIDs with realistic device parameters. Quantum logical gates are implemented by applying resonant microwave pulse to the qubits. This procedure is demonstrated by realizing a controlled-NOT (CNOT) gate and the maximally entangled states of the coupled qubits through highly accurate numerical solution of the time-dependent Schrodinger equation of the system. This coupling scheme is simple and can be readily extended to many-qubit circuits required for scalable quantum information processing.
We analyze a high-fidelity two-qubit gate using fast flux pulses on superconducting fluxonium qubits. The gate is realized by temporarily detuning the magnetic flux through the fluxonium loop away from the half flux quantum sweet spot. We simulate dynamics of two capacitively coupled fluxoniums during the flux pulses and optimize the pulse parameters to obtain a highly accurate iSWAP\sqrt{i\mathrm{SWAP}}iSWAP​-like entangling gate. We also evaluate the effect of the flux noise and qubit relaxation on the gate fidelity. Our results demonstrate that the gate error remains below ${10}^{\ensuremath{-}4}$ for a currently achievable magnitude of the flux noise and qubit relaxation time.
Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2πππ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of 10−210^{-2}10−2 for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.
Implementing high-fidelity two-qubit gates in single-electron spin qubits in silicon double quantum dots is still a major challenge. In this work we employ analytical methods to design control pulses that generate high-fidelity entangling gates for quantum computers based on this platform. Using realistic parameters and initially assuming a noise-free environment, we present simple control pulses that generate cnot, cphase, and cz gates with average fidelities greater than 99.99% and gate times as short as 45 ns. Moreover, using the local invariants of the system's evolution operator, we show that a simple square pulse generates a cnot gate in less than 27 ns and with a fidelity greater than 99.99%. Last, we use the same analytical methods to generate two-qubit gates locally equivalent to CNOT\sqrt{\mathrm{CNOT}}CNOT​ and CZ\sqrt{\mathrm{CZ}}CZ​ that are used to implement simple two-piece pulse sequences that produce high-fidelity cnot and cz gates in the presence of low-frequency noise.
Flux qubits (also known as persistent current qubits), one kind of superconducting tunnel junction circuits, are recently demonstrated as a promising candidate to realize quantum computations.In order to do large-scale quantum information processing, it is necessary to switch on and off the couplings between individual flux qubits in the time-domain while those qubits retain coherence.This report contains two parts: one is to describe my understanding of models, fabrications and measurements for one single flux qubit; the other is to compare two proposed schemes and the corresponding experimental realizations of coherent tunable couplings between flux qubits.