Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2111.05642 · Physical Review A

Atom interferometry using σ+−σ− Raman transitions between |F=1,mF=∓1〉 and |F=2,mF=±1〉

Jeanne Bernard, Yannick Bidel, Malo Cadoret, Clément Salducci, Nassim Zahzam, Sylvain Schwartz, Alexis Bonnin, C. Blanchard, Alexandre Bresson

Published Mar 24, 2022• 11 citations
arXivHTMLPDF

Abstract

We report on the experimental demonstration of a horizontal accelerometer based on atom interferometry using counterpropagative Raman transitions between the states $|F=1,{m}_{F}=\ensuremath{\mp}1\ensuremath{\rangle}$ and $|F=2,{m}_{F}=\ifmmode\pm\else\textpm\fi{}1\ensuremath{\rangle}$ of $^{87}\mathrm{Rb}$. Compared to the $|F=1,{m}_{F}=0\ensuremath{\rangle}\ensuremath{\leftrightarrow}|F=2,{m}_{F}=0\ensuremath{\rangle}$ transition usually used in atom interferometry, our scheme presents the advantages of having only a single counterpropagating transition allowed in a retroreflected geometry, using the same polarization configuration as the magneto-optical trap, and allowing the control of the atom trajectory with magnetic forces. We demonstrate horizontal acceleration measurement in a close-to-zero velocity regime using a single-diffraction Raman process with a short-term sensitivity of $25\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}5}$ m ${\mathrm{s}}^{\ensuremath{-}2} {\mathrm{Hz}}^{\ensuremath{-}1/2}$ and resolution down to $3.8\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}6}$ m ${\mathrm{s}}^{\ensuremath{-}2}$ at an integration time of 3300 s. We discuss specific features of the technique such as spontaneous emission, light shifts, and effects of magnetic field inhomogeneities. We finally give possible applications of this technique in metrology or for cold-atom inertial sensors dedicated to onboard applications.

DOI
10.1103/physreva.105.033318

Related papers

Zero-velocity atom interferometry using a retroreflected frequency-chirped laser

Isadora Perrin, Jeanne Bernard, Yannick Bidel +5 more

Atom interferometry using stimulated Raman transitions in a retroreflected configuration is the first choice in high-precision measurements because it provides low phase noise, a high-quality Raman wave front, and a simple experimental setup. However, it cannot be used for atoms at zero velocity because two pairs of Raman lasers are simultaneously resonant. Here we report a method which allows this degeneracy to be lifted by using a frequency chirp on the Raman lasers. Using this technique, we realize a Mach-Zehnder atom interferometer hybridized with a force balanced accelerometer which provides horizontal acceleration measurements with a short-term sensitivity of $3.2\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}5}\phantom{\rule{0.28em}{0ex}}{\mathrm{m}\phantom{\rule{0.16em}{0ex}}\mathrm{s}}^{\ensuremath{-}2}/\sqrt{\text{Hz}}$. This technique could be used for multiaxis inertial sensors, tiltmeters, or atom interferometry in a microgravity environment.

arXiv:1907.04403•Physical Review A•Nov 21, 2019•29 citations

Multiaxis atom interferometry with a single-diode laser and a pyramidal magneto-optical trap

Xiaojing Wu, Fei Zi, Jordan Dudley +3 more

Atom interferometry has become one of the most powerful technologies for precision measurements. To develop simple, precise, and versatile atom interferometers for inertial sensing, we demonstrate an atom interferometer measuring acceleration, rotation, and inclination by pointing Raman beams toward individual faces of a pyramidal mirror. Only a single diode laser is used for all functions, including atom trapping, interferometry, and detection. Efficient Doppler-sensitive Raman transitions are achieved without the velocity selecting the atom sample, and with zero differential AC Stark shift between the cesium hyperfine ground states, increasing signal-to-noise and suppressing systematic effects. We measure gravity along two axes (vertical and 45$^\circ$ to the vertical), rotation, and inclination with sensitivities of 6$\,μ$m/s$^2/\sqrt{\rm Hz}$, 300$\,μ$rad/s/$\sqrt{\rm Hz}$, and 4$\,μ$rad/$\sqrt{\rm Hz}$, respectively. This work paves the way toward deployable multiaxis atom interferometers for geodesy, geology, or inertial navigation.

arXiv:1707.08693•Optica•Dec 19, 2017•110 citations

Simple, precise, and versatile atom interferometer for field applications

Xuejian Wu, Holger Müller, Fei Zi +4 more

We demonstrate a scheme for atom interferometry to measure multiple axes of accelerations and rotations based on a single-diode laser and a pyramidal magneto-optical trap. The atom interferometer is constructed based on a simple and robust design. Additionally, with zeroed AC Stark shift, efficient Raman transition has been achieved by use of modest laser intensity and a small single photon detuning. By irradiating Raman beams toward not only the whole pyramid but also individual pyramidal faces, multiaxis atom interferometers have been operated. As a demonstration, the vertical interferometer measures the gravity with a sensitivity of 6 μm/s2 /√Hz and one interferometer along the diagonal axis observes the long-term tilt drift of the platform with a sensitivity of 4 μrad/√Hz. As a gyroscope, the atom interferometer along the diagonal axis achieves a sensitivity of 300 μrad/s/√Hz. This work paves the way toward compact, precise and multiaxis atom interferometers for geodesy, geology, or inertial navigation.

•Feb 22, 2018•0 citations

An atom interferometer for measuring horizontal accelerations

Jimmy Stammers

Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.

•Nov 1, 2018•6 citations

Fine-structure Raman interferometry with metastable barium for magnetically resilient inertial sensing

Masaki Nagamori, Hiromi Hatano, Toshiyuki Hosoya +3 more

Atom-interferometric quantum inertial sensors are promising candidates for inertial navigation systems owing to their high sensitivity and intrinsically low drift. However, their application to next-generation inertial navigation, targeting a drift below 100 m/month, requires exceptionally stringent inertial-sensor bias stability. In conventional Raman atom interferometers based on ground-state hyperfine transitions, suppressing inertial-sensor biases arising from quadratic Zeeman shifts requires highly optimized magnetic shielding. In this work, we propose a Raman atom interferometer based on fine-structure transitions between metastable states of barium, which exhibit a quadratic Zeeman sensitivity approximately three orders of magnitude lower than that of conventional alkali-atom Raman transitions. We show that the proposed scheme increases the allowable spatial gradient of the magnetic-field magnitude by a factor of several tens, thereby relaxing the magnetic-field-control requirements from highly optimized shielding and compensation systems to standard magnetic-field-control techniques. Furthermore, we experimentally demonstrate Mach--Zehnder interference between metastable fine-structure states of barium, validating a key building block of the proposed inertial-sensing scheme.

arXiv:2610.20168•Oct 14, 2026•0 citations

Closed-loop dual-atom-interferometer inertial sensor with continuous cold atomic beams

Zhi-Xin Meng, Pei-Qiang Yan, Shengzhe Wang +3 more

We demonstrate a closed-loop light-pulse atom-interferometer inertial sensor that can realize continuous decoupled measurements of acceleration and rotation rate. The sensor operates with double-loop atom interferometers, which share the same Raman light pulses in a spatially separated Mach-Zehnder configuration and use continuous cold atomic beams propagating in opposite directions from two ${\text{2D}}^{+}$ magneto-optical trappings. Acceleration and the rotation rate are decoupled and simultaneously measured by the sum and difference of dual-atom-interferometer signals, respectively. The sensitivities of inertial measurements are also increased to be approximately 1.86 times higher than that of a single atom interferometer. The acceleration phase shift is compensated in real time by phase locking these interferometers via the Raman laser phases from the sum-interferometer signal, and the gyroscope performance is improved. We achieve long-term stabilities of $6.1\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\text{g}$ and 840 nrad/s for the acceleration and the rotation rate, respectively, using a short interrogation time of 0.87 ms (interference area $A=0.097\phantom{\rule{0.2em}{0ex}}{\text{mm}}^{2}$). This work provides a building block for an atomic interferometer-based inertial measurement unit for use in field applications that require a high data rate and high stability.

arXiv:2210.15346•Physical Review Applied•Mar 22, 2024•23 citations
We report on the experimental demonstration of a horizontal accelerometer based on atom interferometry using counterpropagative Raman transitions between the states ∣F=1,mF=\ensuremath∓1\ensuremath⟩|F=1,{m}_{F}=\ensuremath{\mp}1\ensuremath{\rangle}∣F=1,mF​=\ensuremath∓1\ensuremath⟩ and ∣F=2,mF=\ifmmode±\else\textpm\fi1\ensuremath⟩|F=2,{m}_{F}=\ifmmode\pm\else\textpm\fi{}1\ensuremath{\rangle}∣F=2,mF​=\ifmmode±\else\textpm\fi1\ensuremath⟩ of 87Rb^{87}\mathrm{Rb}87Rb. Compared to the ∣F=1,mF=0\ensuremath⟩\ensuremath↔∣F=2,mF=0\ensuremath⟩|F=1,{m}_{F}=0\ensuremath{\rangle}\ensuremath{\leftrightarrow}|F=2,{m}_{F}=0\ensuremath{\rangle}∣F=1,mF​=0\ensuremath⟩\ensuremath↔∣F=2,mF​=0\ensuremath⟩ transition usually used in atom interferometry, our scheme presents the advantages of having only a single counterpropagating transition allowed in a retroreflected geometry, using the same polarization configuration as the magneto-optical trap, and allowing the control of the atom trajectory with magnetic forces. We demonstrate horizontal acceleration measurement in a close-to-zero velocity regime using a single-diffraction Raman process with a short-term sensitivity of 25\ifmmode×\else\texttimes\fi10\ensuremath−525\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}5}25\ifmmode×\else\texttimes\fi10\ensuremath−5 m s\ensuremath−2Hz\ensuremath−1/2{\mathrm{s}}^{\ensuremath{-}2} {\mathrm{Hz}}^{\ensuremath{-}1/2}s\ensuremath−2Hz\ensuremath−1/2 and resolution down to 3.8\ifmmode×\else\texttimes\fi10\ensuremath−63.8\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}6}3.8\ifmmode×\else\texttimes\fi10\ensuremath−6 m s\ensuremath−2{\mathrm{s}}^{\ensuremath{-}2}s\ensuremath−2 at an integration time of 3300 s. We discuss specific features of the technique such as spontaneous emission, light shifts, and effects of magnetic field inhomogeneities. We finally give possible applications of this technique in metrology or for cold-atom inertial sensors dedicated to onboard applications.
Atom interferometry using stimulated Raman transitions in a retroreflected configuration is the first choice in high-precision measurements because it provides low phase noise, a high-quality Raman wave front, and a simple experimental setup. However, it cannot be used for atoms at zero velocity because two pairs of Raman lasers are simultaneously resonant. Here we report a method which allows this degeneracy to be lifted by using a frequency chirp on the Raman lasers. Using this technique, we realize a Mach-Zehnder atom interferometer hybridized with a force balanced accelerometer which provides horizontal acceleration measurements with a short-term sensitivity of $3.2\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}5}\phantom{\rule{0.28em}{0ex}}{\mathrm{m}\phantom{\rule{0.16em}{0ex}}\mathrm{s}}^{\ensuremath{-}2}/\sqrt{\text{Hz}}$. This technique could be used for multiaxis inertial sensors, tiltmeters, or atom interferometry in a microgravity environment.
Atom interferometry has become one of the most powerful technologies for precision measurements. To develop simple, precise, and versatile atom interferometers for inertial sensing, we demonstrate an atom interferometer measuring acceleration, rotation, and inclination by pointing Raman beams toward individual faces of a pyramidal mirror. Only a single diode laser is used for all functions, including atom trapping, interferometry, and detection. Efficient Doppler-sensitive Raman transitions are achieved without the velocity selecting the atom sample, and with zero differential AC Stark shift between the cesium hyperfine ground states, increasing signal-to-noise and suppressing systematic effects. We measure gravity along two axes (vertical and 45∘^\circ∘ to the vertical), rotation, and inclination with sensitivities of 6 μ\,μμm/s2/Hz^2/\sqrt{\rm Hz}2/Hz​, 300 μ\,μμrad/s/Hz\sqrt{\rm Hz}Hz​, and 4 μ\,μμrad/Hz\sqrt{\rm Hz}Hz​, respectively. This work paves the way toward deployable multiaxis atom interferometers for geodesy, geology, or inertial navigation.
We demonstrate a scheme for atom interferometry to measure multiple axes of accelerations and rotations based on a single-diode laser and a pyramidal magneto-optical trap. The atom interferometer is constructed based on a simple and robust design. Additionally, with zeroed AC Stark shift, efficient Raman transition has been achieved by use of modest laser intensity and a small single photon detuning. By irradiating Raman beams toward not only the whole pyramid but also individual pyramidal faces, multiaxis atom interferometers have been operated. As a demonstration, the vertical interferometer measures the gravity with a sensitivity of 6 μm/s2 /√Hz and one interferometer along the diagonal axis observes the long-term tilt drift of the platform with a sensitivity of 4 μrad/√Hz. As a gyroscope, the atom interferometer along the diagonal axis achieves a sensitivity of 300 μrad/s/√Hz. This work paves the way toward compact, precise and multiaxis atom interferometers for geodesy, geology, or inertial navigation.
Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.
Atom-interferometric quantum inertial sensors are promising candidates for inertial navigation systems owing to their high sensitivity and intrinsically low drift. However, their application to next-generation inertial navigation, targeting a drift below 100 m/month, requires exceptionally stringent inertial-sensor bias stability. In conventional Raman atom interferometers based on ground-state hyperfine transitions, suppressing inertial-sensor biases arising from quadratic Zeeman shifts requires highly optimized magnetic shielding. In this work, we propose a Raman atom interferometer based on fine-structure transitions between metastable states of barium, which exhibit a quadratic Zeeman sensitivity approximately three orders of magnitude lower than that of conventional alkali-atom Raman transitions. We show that the proposed scheme increases the allowable spatial gradient of the magnetic-field magnitude by a factor of several tens, thereby relaxing the magnetic-field-control requirements from highly optimized shielding and compensation systems to standard magnetic-field-control techniques. Furthermore, we experimentally demonstrate Mach--Zehnder interference between metastable fine-structure states of barium, validating a key building block of the proposed inertial-sensing scheme.
We demonstrate a closed-loop light-pulse atom-interferometer inertial sensor that can realize continuous decoupled measurements of acceleration and rotation rate. The sensor operates with double-loop atom interferometers, which share the same Raman light pulses in a spatially separated Mach-Zehnder configuration and use continuous cold atomic beams propagating in opposite directions from two 2D+{\text{2D}}^{+}2D+ magneto-optical trappings. Acceleration and the rotation rate are decoupled and simultaneously measured by the sum and difference of dual-atom-interferometer signals, respectively. The sensitivities of inertial measurements are also increased to be approximately 1.86 times higher than that of a single atom interferometer. The acceleration phase shift is compensated in real time by phase locking these interferometers via the Raman laser phases from the sum-interferometer signal, and the gyroscope performance is improved. We achieve long-term stabilities of $6.1\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\text{g}$ and 840 nrad/s for the acceleration and the rotation rate, respectively, using a short interrogation time of 0.87 ms (interference area A=0.097mm2A=0.097\phantom{\rule{0.2em}{0ex}}{\text{mm}}^{2}A=0.097mm2). This work provides a building block for an atomic interferometer-based inertial measurement unit for use in field applications that require a high data rate and high stability.