Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2111.04648 · Journal of the Optical Society of America A

Nanotubes as sinks for quantum particles

Constantinos A. Valagiannopoulos

Published Feb 14, 2022• 2 citations
arXivHTMLPDF

Abstract

Nanotubes with proper thickness, size, and texture make ultra-efficient sinks for quantum particles traveling into specific background media. Several optimal semiconducting cylindrical layers are reported to achieve enhancement in the trapping of matter waves by two to three orders of magnitude. The identified shells can be used as pieces in quantum devices that involve the focusing of incident beams, spanning from charge pumps and superconducting capacitors to radiation pattern controllers and matter-wave lenses.

DOI
10.1364/josaa.449520

Related papers

Maximal quantum scattering by homogeneous spherical inclusions

Constantinos A. Valagiannopoulos

Scattering of matter waves, present at multiple quantum setups, is required to be maximized in several applications from sensing and imaging to quantum switching and memory. The simplest case of a homogeneous spherical scatterer is rigorously solved and optimized with respect to its size, texture, and background by considering the effective quantum properties from a long directory of materials. In this context, several alternative layouts with maximal scattering efficiency are proposed, offering additional degrees of freedom in design without requirements for careful engineering of quantum texture. Many of the reported inclusions exhibit substantial selectivity in their scattering response, admitting them to operate as sharp filters for particle energies or sensitive detectors of electron beams.

Physical review. B./Physical review. B•Jul 18, 2019•13 citations

Doped carbon nanotubes as quantum memory devices

Mikhail B. Belonenko, Nikolay G. Lebedev

Based on the given analysis of the phonon spectrum of single-walled carbon nanotubes, it was suggested that tubes doped with foreign atoms be used as quantum memory devices. The longer decoherence time in such devices is accounted for by the suppression of phonon transition due to a gap observed in the phonon spectrum of carbon nanotubes.

Bulletin of the Russian Academy of Sciences Physics•Dec 1, 2009•2 citations

Perfect quantum cloaking of tilted cylindrical nanocavities

Constantinos A. Valagiannopoulos

A cornerstone in the operation of numerous detecting and sensing quantum setups is the sharp change in the response once a condition ceases to be effective; this regime is typically realized by perfectly cloaking a nanoinclusion from the propagating matter waves. Such a purpose is found well-served by optimally sized nanocylinders, embedded into a suitable quantum texture, that efficiently hide themselves from obliquely impinging electron beams. The optimal designs exhibit high selectivity for particle energies while being wideband with respect to incidence angles; these features render them deployable in various quantum devices from furtive sensors and detectors to quantum switches and matter-wave filters.

Physical review. B./Physical review. B•May 5, 2020•13 citations

Wiring Up Superconducting Qubits

John M. Nichol

A qubit made of a semiconducting nanowire sandwiched between two superconductors could simplify the design of quantum information processing architectures.

Physics•Sep 14, 2015•1 citation

Nanotube Tunneling as a Consequence of Probable Discrete Trajectories

Daryl C. Robinson

It has been recently reported that the electrical charge in a semiconductive carbon nanotube is not evenly distributed, but is divided into charge "islands." A clear understanding of tunneling phenomena can be useful to elucidate the mechanism for electrical conduction in nanotubes. This paper represents the first attempt to shed light on the aforementioned phenomenon through viewing tunneling as a natural consequence of "discrete trajectories." The relevance of this analysis is that it may provide further insight into the higher rate of tunneling processes, which makes tunneling devices attractive. In a situation involving particles impinging on a classically impenetrable barrier, the result of quantum mechanics that the probability of detecting transmitted particles falls off exponentially is derived without wave theory. This paper should provide a basis for calculating the charge profile over the length of the tube so that nanoscale devices' conductive properties may be fully exploited.

•Oct 1, 2001•1 citation

YBa 2 Cu 3 O 7 nano superconducting quantum interference devices on MgO bicrystal substrates

Jianxin Lin, Benedikt Müller, Julian Linek +5 more

We report on nanopatterned YBa2Cu3O7-δ (YBCO) direct current superconducting quantum interference devices (SQUIDs) based on grain boundary Josephson junctions. The nanoSQUIDs are fabricated by epitaxial growth of 120 nm-thick films of the high-transition temperature cuprate superconductor YBCO via pulsed laser deposition on MgO bicrystal substrates with 24° misorientation angle, followed by sputtering of dAu = 65 nm thick Au. Nanopatterning is performed by Ga focused ion beam (FIB) milling. The SQUID performance is comparable to devices on SrTiO3 (STO), as demonstrated by electric transport and noise measurements at 4.2 K. MgO has orders of magnitude smaller dielectric permittivity than STO; i.e., one may avoid Au as a resistively shunting layer to reduce the intrinsic thermal flux noise of the nanoSQUIDs. However, we find that the Au layer is important for avoiding degradation during FIB milling. Hence, we compare devices with different dAu produced by thinning the Au layer via Ar ion milling after FIB patterning. We find that the reduction of dAu yields an increase in junction resistance, however at the expense of a reduction of the critical current and increase in SQUID inductance. This results in an estimated thermal flux noise that is almost independent of dAu. However, for two devices on MgO with 65 nm-thick Au, we find an order of magnitude lower low-frequency excess noise as compared to nanoSQUIDs on STO or those on MgO with reduced dAu. For one of those devices we obtain with bias-reversal readout ultra-low flux noise of ∼175 nΦ0 Hz-1/2 down to ∼10 Hz.

Nanoscale•Jan 1, 2020•17 citations
Nanotubes with proper thickness, size, and texture make ultra-efficient sinks for quantum particles traveling into specific background media. Several optimal semiconducting cylindrical layers are reported to achieve enhancement in the trapping of matter waves by two to three orders of magnitude. The identified shells can be used as pieces in quantum devices that involve the focusing of incident beams, spanning from charge pumps and superconducting capacitors to radiation pattern controllers and matter-wave lenses.
Scattering of matter waves, present at multiple quantum setups, is required to be maximized in several applications from sensing and imaging to quantum switching and memory. The simplest case of a homogeneous spherical scatterer is rigorously solved and optimized with respect to its size, texture, and background by considering the effective quantum properties from a long directory of materials. In this context, several alternative layouts with maximal scattering efficiency are proposed, offering additional degrees of freedom in design without requirements for careful engineering of quantum texture. Many of the reported inclusions exhibit substantial selectivity in their scattering response, admitting them to operate as sharp filters for particle energies or sensitive detectors of electron beams.
A cornerstone in the operation of numerous detecting and sensing quantum setups is the sharp change in the response once a condition ceases to be effective; this regime is typically realized by perfectly cloaking a nanoinclusion from the propagating matter waves. Such a purpose is found well-served by optimally sized nanocylinders, embedded into a suitable quantum texture, that efficiently hide themselves from obliquely impinging electron beams. The optimal designs exhibit high selectivity for particle energies while being wideband with respect to incidence angles; these features render them deployable in various quantum devices from furtive sensors and detectors to quantum switches and matter-wave filters.
It has been recently reported that the electrical charge in a semiconductive carbon nanotube is not evenly distributed, but is divided into charge "islands." A clear understanding of tunneling phenomena can be useful to elucidate the mechanism for electrical conduction in nanotubes. This paper represents the first attempt to shed light on the aforementioned phenomenon through viewing tunneling as a natural consequence of "discrete trajectories." The relevance of this analysis is that it may provide further insight into the higher rate of tunneling processes, which makes tunneling devices attractive. In a situation involving particles impinging on a classically impenetrable barrier, the result of quantum mechanics that the probability of detecting transmitted particles falls off exponentially is derived without wave theory. This paper should provide a basis for calculating the charge profile over the length of the tube so that nanoscale devices' conductive properties may be fully exploited.
We report on nanopatterned YBa2Cu3O7-δ (YBCO) direct current superconducting quantum interference devices (SQUIDs) based on grain boundary Josephson junctions. The nanoSQUIDs are fabricated by epitaxial growth of 120 nm-thick films of the high-transition temperature cuprate superconductor YBCO via pulsed laser deposition on MgO bicrystal substrates with 24° misorientation angle, followed by sputtering of dAu = 65 nm thick Au. Nanopatterning is performed by Ga focused ion beam (FIB) milling. The SQUID performance is comparable to devices on SrTiO3 (STO), as demonstrated by electric transport and noise measurements at 4.2 K. MgO has orders of magnitude smaller dielectric permittivity than STO; i.e., one may avoid Au as a resistively shunting layer to reduce the intrinsic thermal flux noise of the nanoSQUIDs. However, we find that the Au layer is important for avoiding degradation during FIB milling. Hence, we compare devices with different dAu produced by thinning the Au layer via Ar ion milling after FIB patterning. We find that the reduction of dAu yields an increase in junction resistance, however at the expense of a reduction of the critical current and increase in SQUID inductance. This results in an estimated thermal flux noise that is almost independent of dAu. However, for two devices on MgO with 65 nm-thick Au, we find an order of magnitude lower low-frequency excess noise as compared to nanoSQUIDs on STO or those on MgO with reduced dAu. For one of those devices we obtain with bias-reversal readout ultra-low flux noise of ∼175 nΦ0 Hz-1/2 down to ∼10 Hz.