Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2109.15071 · IEEE Transactions on Applied Superconductivity

A Chip-Based Superconducting Magnetic Trap for Levitating Superconducting Microparticles

Martí Gutierrez Latorre, Achintya Paradkar, David Hambraeus, Gerard T. Higgins, Witlef Wieczorek

Published Feb 1, 2022• 19 citations
arXivHTMLPDF

Abstract

Magnetically-levitated superconducting microparticles have been recently proposed as a promising platform for performing quantum experiments with particles in the picogram regime. Here, we demonstrate the superconducting technology to achieve chip-based magnetic levitation of superconducting microparticles. We simulate and fabricate a chip-based magnetic trap capable of levitating superconducting particles with diameters from 0.5$\,\mu$m to 200$\,\mu$m. The trap consists of two stacked silicon chips, each patterned with a planar multi-winding superconducting coil made of niobium. The two coils generate a magnetic field resembling a quadrupole near the trap center, in which we demonstrate trapping of a spherical 50$\mu$m diameter SnPb microparticle at temperatures of 4 K and 40 mK.

DOI
10.1109/tasc.2022.3147730

Related papers

Coupling a Flux-Tunable Resonator to a Magnetically Levitated Superconducting Microparticle

Achintya Paradkar

Magnetically levitated superconducting microparticles provide a promising platform for fundamental quantum experiments and quantum-limited sensing. In the Meissner state, the levitated particle is trapped without mechanical clamping, allowing its center-of-mass motion to exhibit ultralow dissipation. The particle's displacement can be read out dispersively via magnetic flux coupling to superconducting resonators. A challenge for magnetomechanical coupling is to realize a flux-tunable microwave circuit that provides strong flux-to-frequency transduction, low dissipation, and a sufficiently large linear operating range for readout and cooling. This thesis develops and characterizes a chip-based superconducting platform for realizing this transduction.Chip-based levitation of a superconducting microparticle is demonstrated at 40 mK. Passive cryogenic vibration isolation is developed to increase the mechanical quality factors of the levitated particle. For coupling to a microwave circuit, a superconducting flip-chip process based on indium microspheres was developed. The need for Au passivation of Nb or NbN under-bump metallization is demonstrated, and indium-based superconducting interconnects are shown to carry ampere-scale currents. Flux-tunable resonators with 100-200 µm SQUID loops and integrated input coils are designed, fabricated, and characterized. A peak flux responsivity of 20 GHz/Φ₀ is achieved, with one flux quantum modulation requiring only 10-20 µA of input-coil current. Two integrated flux-biasing architectures are developed with flip-chip and on-chip input coils, achieving a total flux transfer efficiency of 1.6%. Junction asymmetry is shown to suppress branch-switching behavior associated with finite SQUID screening.Together, these results establish the superconducting subsystems required for dispersive microwave readout of the center-of-mass motion of a levitated microparticle. Such a magnetomechanical coupling provides a route toward cooling the center-of-mass motion to the ground state, paving the way for the preparation of nonclassical motional states. More broadly, such systems are well-suited for quantum-limited force and acceleration sensing, as well as for probing quantum physics in a previously unexplored mass regime.

•Apr 13, 2026•0 citations

On-chip levitation of ferromagnetic microparticles

Martijn Janse, M. Luisa Mattana, Julian van Doorn +4 more

Levitation of microscopic objects in vacuum combines exceptional environmental isolation with precise control of their dynamics, pushing the limits of sensing and macroscopic quantum physics. In particular, magnetic levitation allows a large range of particle sizes, while avoiding detrimental effects from high-intensity optical trapping beams and electric field noise. However, existing diamagnetic and Meissner levitation approaches are typically constrained by low mechanical eigenfrequencies, limited integrability with other systems due to bulky coils or magnets, and, for Meissner levitation, the need for cryogenic operation. Here, we demonstrate a room-temperature on-chip magnetic levitation platform capable of stably levitating a nanogram (6.5 micrometer radius) ferromagnetic microsphere. The platform is scalable and tunable, and supports librational modes with eigenfrequencies exceeding 10 kHz. Further miniaturization and coupling to solid-state spin qubits could enable cooling to the quantum ground state. Beyond quantum experiments, this architecture enables integrated precision sensing and studies of isolated ferromagnet thermodynamics.

quant-pharXiv:2605.00090•May 4, 2026

Superconducting levitation and control of a high-reflectivity micromirror

Philipp Koller, Jannek J. Hansen, David Walcher +9 more

We introduce a method to suspend an optical micromirror, with a total mass of \SI{30}{\micro\gram}, using superconducting magnetic levitation. The micromirror is formed on a silicon membrane, coated with a high-reflectivity dielectric stack and attached to superconducting microspheres. The object is stably levitated inside a magnetic quadrupole field at cryogenic temperatures. Magnetic feedback on the transverse motion is used to stabilize the position of the levitator within the trapping field, allowing to measure the axial displacement of the levitator using optical interferometry. The system reaches a sensitivity of order \SI{100}{\pico\metre/\sqrt{\hertz}} near the axial trap frequency of \SI{167}{Hz}. This approach enables free-standing mirrors with minimal dissipation and tunable oscillation frequencies, offering a platform for precision sensing and quantum cavity optomechanics in the microgram regime.

quant-pharXiv:2609.17787•Sep 17, 2026

Superconducting Microsphere Magnetically Levitated in an Anharmonic Potential with Integrated Magnetic Readout

Martí Gutierrez Latorre, Gerard T. Higgins, Achintya Paradkar +2 more

The authors present a platform for quantum experiments on levitated particles with masses ranging from nanograms to micrograms. They exploit the Meissner effect to magnetically levitate superconducting microparticles on a chip, in vacuum at ultralow temperatures. Integrated magnetic readout enables coupling to superconducting quantum circuits. This platform allows for precise measurements of force and acceleration, with potential applications in sensing, including the search for dark matter.

arXiv:2210.13451•Physical Review Applied•May 12, 2023•41 citations

High- Q Magnetic Levitation and Control of Superconducting Microspheres at Millikelvin Temperatures

Joachim Hofer, R. Gross, Gerard T. Higgins +11 more

We report the levitation of a superconducting lead-tin sphere with 100 μm diameter (corresponding to a mass of 5.6 μg) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 Hz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6×10^{7}. We also demonstrate 3D magnetic feedback control of the motion of the sphere. The setup is housed in a dilution refrigerator operating at 15 mK. By implementing a cryogenic vibration isolation system, we can attenuate environmental vibrations at 200 Hz by approximately 7 orders of magnitude. The combination of low temperature, large mass, and high quality factor provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times.

arXiv:2211.06289•Physical Review Letters•Jul 25, 2023•72 citations

Micro-wire Magnetic Trap Chips for use in Ultracold Atom Experiments

Jacques Thibault

In order to take quantum mechanical systems out of the lab and produce practical devices, a method of miniaturizing and integrating apparatus components is needed. In the context of ultracold atomic gas experiments, the ideal method of achieving this miniaturization is the implementation of atom chip technology. By depositing micro-scale current carrying wires onto planar substrates, it is possible to create a magnetic trap capable of confining a cloud of neutral atoms in sufficient proximity to the chip surface for solid state devices to interact with the cloud. This thesis presents our lab’s first steps towards creating an atom chip capable of confining a cloud of rubidium-87. The chip prototypes were developed with the intent to incorporate them into the hybrid system apparatus within our lab. The chips are intended to serve as a platform for facilitating the interaction between the atomic gas ensemble and mesoscopic solid-state devices, allowing for the hybridization of the two systems. In this work I describe the design of the trapping wire configuration and the fabrication of the first two generations of chip prototypes. Additionally, I provide numerical simulations of the produced magnetic field, from which estimates of the trap frequency and depth can be calculated. Finally, I introduce some basic characterization tests of the absolute current limitations and resistive behavior of the chip wires, and the dimensional uniformity of the fabricated wire profiles.

•Jan 1, 2019•1 citation
Magnetically-levitated superconducting microparticles have been recently proposed as a promising platform for performing quantum experiments with particles in the picogram regime. Here, we demonstrate the superconducting technology to achieve chip-based magnetic levitation of superconducting microparticles. We simulate and fabricate a chip-based magnetic trap capable of levitating superconducting particles with diameters from 0.5 μ\,\muμm to 200 μ\,\muμm. The trap consists of two stacked silicon chips, each patterned with a planar multi-winding superconducting coil made of niobium. The two coils generate a magnetic field resembling a quadrupole near the trap center, in which we demonstrate trapping of a spherical 50μ\muμm diameter SnPb microparticle at temperatures of 4 K and 40 mK.
Magnetically levitated superconducting microparticles provide a promising platform for fundamental quantum experiments and quantum-limited sensing. In the Meissner state, the levitated particle is trapped without mechanical clamping, allowing its center-of-mass motion to exhibit ultralow dissipation. The particle's displacement can be read out dispersively via magnetic flux coupling to superconducting resonators. A challenge for magnetomechanical coupling is to realize a flux-tunable microwave circuit that provides strong flux-to-frequency transduction, low dissipation, and a sufficiently large linear operating range for readout and cooling. This thesis develops and characterizes a chip-based superconducting platform for realizing this transduction.Chip-based levitation of a superconducting microparticle is demonstrated at 40 mK. Passive cryogenic vibration isolation is developed to increase the mechanical quality factors of the levitated particle. For coupling to a microwave circuit, a superconducting flip-chip process based on indium microspheres was developed. The need for Au passivation of Nb or NbN under-bump metallization is demonstrated, and indium-based superconducting interconnects are shown to carry ampere-scale currents. Flux-tunable resonators with 100-200 µm SQUID loops and integrated input coils are designed, fabricated, and characterized. A peak flux responsivity of 20 GHz/Φ₀ is achieved, with one flux quantum modulation requiring only 10-20 µA of input-coil current. Two integrated flux-biasing architectures are developed with flip-chip and on-chip input coils, achieving a total flux transfer efficiency of 1.6%. Junction asymmetry is shown to suppress branch-switching behavior associated with finite SQUID screening.Together, these results establish the superconducting subsystems required for dispersive microwave readout of the center-of-mass motion of a levitated microparticle. Such a magnetomechanical coupling provides a route toward cooling the center-of-mass motion to the ground state, paving the way for the preparation of nonclassical motional states. More broadly, such systems are well-suited for quantum-limited force and acceleration sensing, as well as for probing quantum physics in a previously unexplored mass regime.
Levitation of microscopic objects in vacuum combines exceptional environmental isolation with precise control of their dynamics, pushing the limits of sensing and macroscopic quantum physics. In particular, magnetic levitation allows a large range of particle sizes, while avoiding detrimental effects from high-intensity optical trapping beams and electric field noise. However, existing diamagnetic and Meissner levitation approaches are typically constrained by low mechanical eigenfrequencies, limited integrability with other systems due to bulky coils or magnets, and, for Meissner levitation, the need for cryogenic operation. Here, we demonstrate a room-temperature on-chip magnetic levitation platform capable of stably levitating a nanogram (6.5 micrometer radius) ferromagnetic microsphere. The platform is scalable and tunable, and supports librational modes with eigenfrequencies exceeding 10 kHz. Further miniaturization and coupling to solid-state spin qubits could enable cooling to the quantum ground state. Beyond quantum experiments, this architecture enables integrated precision sensing and studies of isolated ferromagnet thermodynamics.
We introduce a method to suspend an optical micromirror, with a total mass of \SI{30}{\micro\gram}, using superconducting magnetic levitation. The micromirror is formed on a silicon membrane, coated with a high-reflectivity dielectric stack and attached to superconducting microspheres. The object is stably levitated inside a magnetic quadrupole field at cryogenic temperatures. Magnetic feedback on the transverse motion is used to stabilize the position of the levitator within the trapping field, allowing to measure the axial displacement of the levitator using optical interferometry. The system reaches a sensitivity of order \SI{100}{\pico\metre/\sqrt{\hertz}} near the axial trap frequency of \SI{167}{Hz}. This approach enables free-standing mirrors with minimal dissipation and tunable oscillation frequencies, offering a platform for precision sensing and quantum cavity optomechanics in the microgram regime.
We report the levitation of a superconducting lead-tin sphere with 100 μm diameter (corresponding to a mass of 5.6 μg) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 Hz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6×10^{7}. We also demonstrate 3D magnetic feedback control of the motion of the sphere. The setup is housed in a dilution refrigerator operating at 15 mK. By implementing a cryogenic vibration isolation system, we can attenuate environmental vibrations at 200 Hz by approximately 7 orders of magnitude. The combination of low temperature, large mass, and high quality factor provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times.
In order to take quantum mechanical systems out of the lab and produce practical devices, a method of miniaturizing and integrating apparatus components is needed. In the context of ultracold atomic gas experiments, the ideal method of achieving this miniaturization is the implementation of atom chip technology. By depositing micro-scale current carrying wires onto planar substrates, it is possible to create a magnetic trap capable of confining a cloud of neutral atoms in sufficient proximity to the chip surface for solid state devices to interact with the cloud. This thesis presents our lab’s first steps towards creating an atom chip capable of confining a cloud of rubidium-87. The chip prototypes were developed with the intent to incorporate them into the hybrid system apparatus within our lab. The chips are intended to serve as a platform for facilitating the interaction between the atomic gas ensemble and mesoscopic solid-state devices, allowing for the hybridization of the two systems. In this work I describe the design of the trapping wire configuration and the fabrication of the first two generations of chip prototypes. Additionally, I provide numerical simulations of the produced magnetic field, from which estimates of the trap frequency and depth can be calculated. Finally, I introduce some basic characterization tests of the absolute current limitations and resistive behavior of the chip wires, and the dimensional uniformity of the fabricated wire profiles.