Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2109.00316

Entanglement Engineering by Transmon Qubit in a Circuit QED

Ahmad Salmanogli

Published Sep 1, 2021• 5 citations
arXivHTMLPDF

Abstract

this study significantly emphasizes on the entanglement engineering using a transmon qubit. A transmon qubit is created with two superconducting islands coupled with two Josephson Junction embedded into a transmission line. The transmon qubit energies are manipulated through its coupling to the transmission line. The key factor here is the coupling factor between transmission line and qubit by which the quantum features of the system such as transmon decay rate, energy dispersion, and related coherence time are controlled. To complete knowledge about the design, the system is quantum mechanically analyzed and the related Hamiltonian is derived. Accordingly, the dynamics equation of motions is derived and so the energy dispersion and the coupled system coherence time are investigated. The system engineering should be established in such a way that satisfies the energy dispersion and the coherence time. However, to analyze the entanglement between modes, it needs to calculate the number of photons of the transmission lines and the transmon qubit, and also the phase sensitive cross-correlation. The important section of this study emphasizes on engineering the coupling between the transmon qubit and transmission line to enhance the entanglement. The results show that around the Josephson Junction location where the more coupling is established the more entanglement between modes is created.

DOI
10.48550/arxiv.2109.00316

Related papers

Qubit Design for a Superconducting Quantum Computer

David Wohlgemuth

The leading approach to attempt quantum computing is based on superconductors. In particular, Circuit Quantum Electrodynamic systems (circuit QED) are used to couple photons stored in a microwave resonator to a quantum bit (qubit), allowing the qubit to be controlled and measured. A lumped element parallel RLC circuit will be used to model a superconducting coplanar microwave resonator, in order to gain an intuitive understanding of how various parameters affect its electromagnetic properties, and how they can be optimised to provide desired specifications. Resonator quality factors will also be realised, which describe the effects of coupling the microwave resonator to external input/output transmission lines. The qubit is generated by a superconducting capacitively shunted Josephson Junction; the transmon, and its operation and non-linear behaviour will be discussed in this report. The transmon is integrated with a microwave resonator to generate the circuit QED system, and the derivation of the systems Hamiltonian will allow us to determine the equations describing the behaviour of the system, and therefore how it may be controlled and measured. The Bloch sphere will be introduced, which provides a useful geometric representation of the state space of a two-level quantum system. Mapping the derived Hamiltonian to the time-dependent Schrodinger equation facilitates realisation of control mechanisms of the qubit based on rotations about the Bloch sphere.

The UNSW Canberra at ADFA Journal of Undergraduate Engineering Research•Dec 19, 2018•0 citations

Experiments on multi-level superconducting qubits and coaxial circuit QED

Michael Peterer

Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.

•Jan 1, 2016•1 citation

The road to long coherence time superconducting quantum bits

Dongning Zheng, Yirong Jin

Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.

Chinese Science Bulletin (Chinese Version)•Sep 27, 2017•1 citation

From Macroscopic Quantum Tunneling to Circuit QED: Coherence and Dissipation in 3D Transmon Qubits

Gustavo Moreto, Diego Molina, Saulo Gabriel Pereira Nascimento Alberton +9 more

Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an $$Al/AlO_x/Al$$ transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of $$\omega _{01}=5.0122~\textrm{GHz}$$ and an anharmonicity of $$\alpha /2\pi =-202.4~\textrm{MHz}$$ , corresponding to $$E_J/E_C \approx 82.9$$ . Flux spectroscopy yields a cavity-qubit coupling strength of $$g/2\pi = 260~\textrm{MHz}$$ , while the cavity linewidth gives a loaded quality factor of $$Q_L=6127$$ and a Purcell limit of $$T_1^{\textrm{Purcell}}\approx 82~\mu \textrm{s}$$ . Time-domain measurements yield coherence times of $$T_1 = 17.4~\mu \textrm{s}$$ and $$T_2^* = 5.8~\mu \textrm{s}$$ . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.

Brazilian Journal of Physics•Oct 23, 2026•0 citations

Multi-mode coaxial transmon qubits for quantum computing and sensing

Wills, James Fox

Superconducting circuits are well established as a viable candidate for the realisation of quantum computers. Circuits based on the transmon qubit are now ubiquitous, owing to its simple design and reduced control wiring overhead. An issue with transmon qubit-based architectures is the always-on unwanted interactions that impose limits on gate speeds and introduce errors into their operation. In addition, understanding sources of noise and decoherence is essential to the low-error operation quantum computers. This thesis describes the implementation of a multi-mode superconducting qubit in a coaxial circuit QED architecture. Constructed from three superconducting islands, connected via two Josephson junctions, the device possesses two transmon-like modes with orthogonal field symmetries. The unique polarisation of each mode allows for engineering dissipation and coupling in the system, extending functionality beyond the single-mode transmon. Experimental results on the unit-cell of the two-mode coaxial transmon are presented, demonstrating coherent control and simultaneous dispersive readout of the modes of the device. A predictive theory of charge sensitivity in a multi-mode superconducting qubit is presented, and experimental results in agreement of this theory are shown, observing sensitivity to four charge-parity configurations and two independent gate-charge offsets. The utility of a multi-mode qubit as a charge detector in spatially tracking local-charge drift of ≃ 100 µm length scales is also shown, demonstrating the use of these devices as tools in understanding charge noise in superconducting circuits. Finally, a system of a pair of coupled two-mode coaxial transmons is introduced, demonstrating a highly mode-selective coupling architecture. A suppressed quantum crosstalk of 2 kHz between protected modes of the devices is measured, along with equal single qubit gate fidelities when operated both individually and simultaneously. A first characterisation of a microwave activated conditional phase interaction between computational modes driven via ancillary transitions (AT-MAP) is presented. Whilst not shown in this work, this state-dependent two-qubit interaction can be used to generate entanglement. Combined with the low crosstalk demonstrated, this shows the multi-mode qubit architecture is a promising candidate for the construction of larger scale quantum processors with fast gates and low crosstalk-related errors.

•Jan 1, 2022•0 citations

Control on the Sensor Coherence of Transmon Superconducting Qubit via the Gradient Descent Algorithm

Sergey Borisenok

Quantum systems based on superconducting circuits with qubits with quantized energy levels serve as an efficient physical background for constructing different quantum devices, for instance, quantum sensors. The important class of such engineering devices belongs to the systems with quantum tunneling effects, like Josephson junctions, where the set of energy levels is influenced by the external fields. These fields change the phase properties of the measuring qubits, and, in this way, they can be detected. The weakly anharmonic oscillator is often referred as a transmon qubit. Such qubits are constructed with superconducting capacitor structures connected by Josephson junctions, they can be controlled by microwave pulses of a few nanoseconds. The quantum sensing mechanism studied here is based on coupling the measuring transmon superconducting qubits with magnetic materials. The sensing protocol of Ramsey Fringes interferometry covers several stages and demands high-quality control over the sensor coherence. Although the weakly nonlinear properties of transmons prevent the sensing procedure from the strong influence of external perturbations, nevertheless, the extension of the coherence time interval and minimization of the dephasing effects are still a matter of great importance. Here we discuss the improvement of the quantum sensor performance by the application of feedback control in the form of gradient descent algorithm over the dephasing factor-function.

International Journal of Advanced Natural Sciences and Engineering Researches•Jan 1, 2023•1 citation
this study significantly emphasizes on the entanglement engineering using a transmon qubit. A transmon qubit is created with two superconducting islands coupled with two Josephson Junction embedded into a transmission line. The transmon qubit energies are manipulated through its coupling to the transmission line. The key factor here is the coupling factor between transmission line and qubit by which the quantum features of the system such as transmon decay rate, energy dispersion, and related coherence time are controlled. To complete knowledge about the design, the system is quantum mechanically analyzed and the related Hamiltonian is derived. Accordingly, the dynamics equation of motions is derived and so the energy dispersion and the coupled system coherence time are investigated. The system engineering should be established in such a way that satisfies the energy dispersion and the coherence time. However, to analyze the entanglement between modes, it needs to calculate the number of photons of the transmission lines and the transmon qubit, and also the phase sensitive cross-correlation. The important section of this study emphasizes on engineering the coupling between the transmon qubit and transmission line to enhance the entanglement. The results show that around the Josephson Junction location where the more coupling is established the more entanglement between modes is created.
The leading approach to attempt quantum computing is based on superconductors. In particular, Circuit Quantum Electrodynamic systems (circuit QED) are used to couple photons stored in a microwave resonator to a quantum bit (qubit), allowing the qubit to be controlled and measured. A lumped element parallel RLC circuit will be used to model a superconducting coplanar microwave resonator, in order to gain an intuitive understanding of how various parameters affect its electromagnetic properties, and how they can be optimised to provide desired specifications. Resonator quality factors will also be realised, which describe the effects of coupling the microwave resonator to external input/output transmission lines. The qubit is generated by a superconducting capacitively shunted Josephson Junction; the transmon, and its operation and non-linear behaviour will be discussed in this report. The transmon is integrated with a microwave resonator to generate the circuit QED system, and the derivation of the systems Hamiltonian will allow us to determine the equations describing the behaviour of the system, and therefore how it may be controlled and measured. The Bloch sphere will be introduced, which provides a useful geometric representation of the state space of a two-level quantum system. Mapping the derived Hamiltonian to the time-dependent Schrodinger equation facilitates realisation of control mechanisms of the qubit based on rotations about the Bloch sphere.
Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.
Abstract Superconducting quantum circuits are a leading platform for quantum-information processing, but their development requires expertise spanning device design, microfabrication, cryogenic operation, microwave control, and quantum characterization. In this work, we report the realization of a flux-tunable superconducting transmon platform and present an integrated workflow encompassing design, fabrication, measurement, and numerical modeling. The device consists of an Al/AlOx/AlAl/AlO_x/AlAl/AlOx​/Al transmon coupled to a three-dimensional microwave cavity operating in the circuit quantum electrodynamics (cQED) dispersive regime. Two-tone spectroscopy reveals a fundamental transition frequency of ω01=5.0122 GHz\omega _{01}=5.0122~\textrm{GHz}ω01​=5.0122 GHz and an anharmonicity of α/2π=−202.4 MHz\alpha /2\pi =-202.4~\textrm{MHz}α/2π=−202.4 MHz , corresponding to EJ/EC≈82.9E_J/E_C \approx 82.9EJ​/EC​≈82.9 . Flux spectroscopy yields a cavity-qubit coupling strength of g/2π=260 MHzg/2\pi = 260~\textrm{MHz}g/2π=260 MHz , while the cavity linewidth gives a loaded quality factor of QL=6127Q_L=6127QL​=6127 and a Purcell limit of T1Purcell≈82 μsT_1^{\textrm{Purcell}}\approx 82~\mu \textrm{s}T1Purcell​≈82 μs . Time-domain measurements yield coherence times of T1=17.4 μsT_1 = 17.4~\mu \textrm{s}T1​=17.4 μs and T2∗=5.8 μsT_2^* = 5.8~\mu \textrm{s}T2∗​=5.8 μs . To investigate coherence and dissipation in the device, the experimental observations are analyzed within a Lindblad master-equation framework describing cavity photon loss and thermal excitation, qubit energy relaxation, and pure dephasing processes. Using a set of experimentally extracted parameters, the model reproduces the measured spectroscopic and time-domain observables, providing a quantitative description of the open-system dynamics of the transmon-cavity platform. The analysis shows that the measured coherence is primarily limited by pure dephasing and energy-relaxation processes, whereas thermal excitation plays a minor role under the experimental conditions. Inspired by the broader framework of quantum dissipation in macroscopic quantum systems pioneered by Caldeira and collaborators, this approach enables a quantitative analysis of relaxation and dephasing processes in superconducting quantum circuits. Beyond the characterization of a single device, the present work demonstrates the establishment of the expertise, infrastructure, and experimental workflow required for the design, fabrication, measurement, and modeling of superconducting quantum circuits, contributing to the development of quantum technologies in Brazil and related applications.
Superconducting circuits are well established as a viable candidate for the realisation of quantum computers. Circuits based on the transmon qubit are now ubiquitous, owing to its simple design and reduced control wiring overhead. An issue with transmon qubit-based architectures is the always-on unwanted interactions that impose limits on gate speeds and introduce errors into their operation. In addition, understanding sources of noise and decoherence is essential to the low-error operation quantum computers. This thesis describes the implementation of a multi-mode superconducting qubit in a coaxial circuit QED architecture. Constructed from three superconducting islands, connected via two Josephson junctions, the device possesses two transmon-like modes with orthogonal field symmetries. The unique polarisation of each mode allows for engineering dissipation and coupling in the system, extending functionality beyond the single-mode transmon. Experimental results on the unit-cell of the two-mode coaxial transmon are presented, demonstrating coherent control and simultaneous dispersive readout of the modes of the device. A predictive theory of charge sensitivity in a multi-mode superconducting qubit is presented, and experimental results in agreement of this theory are shown, observing sensitivity to four charge-parity configurations and two independent gate-charge offsets. The utility of a multi-mode qubit as a charge detector in spatially tracking local-charge drift of ≃ 100 µm length scales is also shown, demonstrating the use of these devices as tools in understanding charge noise in superconducting circuits. Finally, a system of a pair of coupled two-mode coaxial transmons is introduced, demonstrating a highly mode-selective coupling architecture. A suppressed quantum crosstalk of 2 kHz between protected modes of the devices is measured, along with equal single qubit gate fidelities when operated both individually and simultaneously. A first characterisation of a microwave activated conditional phase interaction between computational modes driven via ancillary transitions (AT-MAP) is presented. Whilst not shown in this work, this state-dependent two-qubit interaction can be used to generate entanglement. Combined with the low crosstalk demonstrated, this shows the multi-mode qubit architecture is a promising candidate for the construction of larger scale quantum processors with fast gates and low crosstalk-related errors.
Quantum systems based on superconducting circuits with qubits with quantized energy levels serve as an efficient physical background for constructing different quantum devices, for instance, quantum sensors. The important class of such engineering devices belongs to the systems with quantum tunneling effects, like Josephson junctions, where the set of energy levels is influenced by the external fields. These fields change the phase properties of the measuring qubits, and, in this way, they can be detected. The weakly anharmonic oscillator is often referred as a transmon qubit. Such qubits are constructed with superconducting capacitor structures connected by Josephson junctions, they can be controlled by microwave pulses of a few nanoseconds. The quantum sensing mechanism studied here is based on coupling the measuring transmon superconducting qubits with magnetic materials. The sensing protocol of Ramsey Fringes interferometry covers several stages and demands high-quality control over the sensor coherence. Although the weakly nonlinear properties of transmons prevent the sensing procedure from the strong influence of external perturbations, nevertheless, the extension of the coherence time interval and minimization of the dephasing effects are still a matter of great importance. Here we discuss the improvement of the quantum sensor performance by the application of feedback control in the form of gradient descent algorithm over the dephasing factor-function.