Suppressed Crosstalk between Two-Junction Superconducting Qubits with Mode-Selective Exchange Coupling
A. D. K. Finck, Santino D. Carnevale, D. Klaus, Christopher Scerbo, J. Blair, Thomas McConkey, Cihan Kurter, April Carniol, George Keefe, Muir Kumph, Oliver Dial
Fixed-frequency qubits can suffer from always-on interactions that inhibit independent control. Here, we address this issue by experimentally demonstrating a superconducting architecture using qubits that comprise of two capacitively shunted Josephson junctions connected in series. Historically known as tunable coupling qubits (TCQs), such two-junction qubits support two modes with distinct frequencies and spatial symmetries. By selectively coupling only one type of mode and using the other as our computational basis, we greatly suppress crosstalk between the data modes while permitting all-microwave two-qubit gates.
Fixed-frequency qubits can suffer from always-on interactions that inhibit independent control. Here, we address this issue by experimentally demonstrating a superconducting architecture using qubits that comprise of two capacitively shunted Josephson junctions connected in series. Historically known as tunable coupling qubits (TCQs), such two-junction qubits support two modes with distinct frequencies and spatial symmetries. By selectively coupling only one type of mode and using the other as our computational basis, we greatly suppress crosstalk between the data modes while permitting all-microwave two-qubit gates.
All-microwave control of fixed-frequency superconducting quantum systems offers the potential to reduce control circuit complexity and increase system coherence. Nevertheless, due to the limited control flexibility in qubit parameters, one has to address several issues, such as quantum crosstalk and frequency crowding, for scaling up qubit architecture with nontunable elements. This paper proposes a microwave-activated two-qubit gate scheme for two fixed-frequency transmon qubits coupled via a fixed-frequency transmon coupler. The protocol relies on applying a microwave pulse exclusively to the coupler, enabling the implementation of a controlled-Z gate. We show that the gate fidelity exceeding 0.999 can be achieved within 150 ns, excluding decoherence effects. Moreover, we also show that leakage from the computational subspace to noncomputational states can also be effectively suppressed.
As superconducting quantum processors scale to large qubit counts, unwanted microwave drive crosstalk becomes an important source of coherent errors. Here, we investigate the role of parasitic coupling paths in the suppression of drive crosstalk in a processor with two fixed-frequency transmon qubits and a tunable coupler. To account for the many different coupling paths, we develop a detailed circuit model to capture the dependence of crosstalk on the coupler frequency. We experimentally demonstrate suppression of crosstalk, finding that the suppression does not originate solely from cancellation of the effective qubit-qubit coupling, but also is a result of interference between other coupling paths. Building on these insights, we show that drive crosstalk can be suppressed with the right choice of parasitic capacitances, which otherwise often are treated as unwanted design imperfections. Our results provide practical guidance for low-crosstalk device design of superconducting quantum processors and point toward a broader strategy in which parasitic coupling paths are engineered rather than simply minimized.
Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach 99.9%, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual ZZ interaction for qubit-qubit detunings well outside the straddling regime, even without direct inter-qubit capacitance, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong ZZ interaction of approximately 70MHz, enabling a 20ns controlled-Z gate with simulated coherent infidelity below 10−5. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.
Superconducting quantum circuits typically use capacitive charge-based linear coupling schemes to control interactions between elements such as qubits. While simple and effective, this coupling scheme makes it difficult to satisfy competing circuit design requirements such as maintaining large qubit anharmonicity and coherence along with a high degree of qubit connectivity and packing density. Moreover, tunable interactions using linear coupling elements produce dynamical variations in mode hybridization, which can induce non-adiabatic transitions, resulting in leakage errors and limiting gate speeds. In this work we attempt to address these challenges by proposing a junction-based coupling architecture based on SQUID (superconducting quantum interference device) couplers with relatively small Josephson energies. SQUID couplers provide intrinsic cross-Kerr interactions that can be controlled by external fluxes and that do not rely on mode hybridization. The small Josephson energies of the coupler maintain the interaction at a perturbative scale, which limits undesired higher-order mixing between coupled elements while achieving a sufficiently strong cross-Kerr interaction originating from diagonal coupling elements. Based on these properties, we show that a SQUID coupler can be used to implement a fast, adiabatic, and high-fidelity controlled-Z gate without introducing extra modes, and the operation is robust against junction asymmetry for high-frequency qubits. Although unconventional crosstalk may arise due to junction asymmetries and parasitic hybridization with spectator qubits, we show that these effects are sufficiently small for realistic circuit parameters. As an example of the utility of such junction-based coupling schemes, we present a scalable tiling strategy for a miniaturized superconducting quantum processor based on merged-element transmon qubits.
A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.