In solving optimization problems, objective functions generally need to be minimized or maximized. However, objective functions cannot always be formulated explicitly in a mathematical form for complicated problem settings. Although several regression techniques infer the approximate forms of objective functions, they are at times expensive to evaluate. Optimal points of "black-box" objective functions are computed in such scenarios, while effectively using a small number of clues. Recently, an efficient method by use of inference by sparse prior for a black-box objective function with binary variables has been proposed. In this method, a surrogate model was proposed in the form of a quadratic unconstrained binary optimization (QUBO) problem, and was iteratively solved to obtain the optimal solution of the black-box objective function. In the present study, we employ the D-Wave 2000Q quantum annealer, which can solve QUBO by driving the binary variables by quantum fluctuations. The D-Wave 2000Q quantum annealer does not necessarily output the ground state at the end of the protocol due to freezing effect during the process. We investigate effects from the output of the D-Wave quantum annealer in performing black-box optimization. We demonstrate a benchmark test by employing the sparse Sherrington-Kirkpatrick (SK) model as the black-box objective function, by introducing a parameter controlling the sparseness of the interaction coefficients. Comparing the results of the D-Wave quantum annealer to those of the simulated annealing (SA) and semidefinite programming (SDP), our results by the D-Wave quantum annealer and SA exhibit superiority in black-box optimization with SDP. On the other hand, we did not find any advantage of the D-Wave quantum annealer over the simulated annealing. As far as in our case, any effects by quantum fluctuation are not found.
In solving optimization problems, objective functions generally need to be minimized or maximized. However, objective functions cannot always be formulated explicitly in a mathematical form for complicated problem settings. Although several regression techniques infer the approximate forms of objective functions, they are at times expensive to evaluate. Optimal points of "black-box" objective functions are computed in such scenarios, while effectively using a small number of clues. Recently, an efficient method by use of inference by sparse prior for a black-box objective function with binary variables has been proposed. In this method, a surrogate model was proposed in the form of a quadratic unconstrained binary optimization (QUBO) problem, and was iteratively solved to obtain the optimal solution of the black-box objective function. In the present study, we employ the D-Wave 2000Q quantum annealer, which can solve QUBO by driving the binary variables by quantum fluctuations. The D-Wave 2000Q quantum annealer does not necessarily output the ground state at the end of the protocol due to freezing effect during the process. We investigate effects from the output of the D-Wave quantum annealer in performing black-box optimization. We demonstrate a benchmark test by employing the sparse Sherrington-Kirkpatrick (SK) model as the black-box objective function, by introducing a parameter controlling the sparseness of the interaction coefficients. Comparing the results of the D-Wave quantum annealer to those of the simulated annealing (SA) and semidefinite programming (SDP), our results by the D-Wave quantum annealer and SA exhibit superiority in black-box optimization with SDP. On the other hand, we did not find any advantage of the D-Wave quantum annealer over the simulated annealing. As far as in our case, any effects by quantum fluctuation are not found.
In materials informatics, searching for chemical materials with desired properties is challenging due to the vastness of the chemical space. Moreover, the high cost of evaluating properties necessitates a search with a few clues. In practice, there is also a demand for proposing compositions that are easily synthesizable. In the real world, such as in the exploration of chemical materials, it is common to encounter problems targeting black-box objective functions where formalizing the objective function in explicit form is challenging, and the evaluation cost is high. In recent research, a Bayesian optimization method has been proposed to formulate the quadratic unconstrained binary optimization (QUBO) problem as a surrogate model for black-box objective functions with discrete variables. Regarding this method, studies have been conducted using the D-Wave quantum annealer to optimize the acquisition function, which is based on the surrogate model and determines the next exploration point for the black-box objective function. In this paper, we address optimizing a black-box objective function containing discrete variables in the context of actual chemical material exploration. In this optimization problem, we demonstrate results obtaining parameters of the acquisition function by sampling from a probability distribution with variance can explore the solution space more extensively than in the case of no variance. As a result, we found combinations of substituents in compositions with the desired properties, which could only be discovered when we set an appropriate variance.
Recently, inspired by quantum annealing, many solvers specialized for unconstrained binary quadratic programming problems have been developed. For further improvement and application of these solvers, it is important to clarify the differences in their performance for various types of problems. In this study, the performance of four quadratic unconstrained binary optimization problem solvers, namely D-Wave Hybrid Solver Service (HSS), Toshiba Simulated Bifurcation Machine (SBM), Fujitsu Digital Annealer (DA), and simulated annealing on a personal computer, was benchmarked. The problems used for benchmarking were instances of real problems in MQLib, instances of the SAT-UNSAT phase transition point of random not-all-equal 3-SAT (NAE 3-SAT), and the Ising spin glass Sherrington-Kirkpatrick (SK) model. Concerning MQLib instances, the HSS performance ranked first; for NAE 3-SAT, DA performance ranked first; and regarding the SK model, SBM performance ranked first. These results may help understand the strengths and weaknesses of these solvers.
Abstract Quantum computers have strict requirements for the problems that they can efficiently solve. One of the principal limiting factor for the performances of noisy intermediate-scale quantum (NISQ) devices is the number of qubits required by the running algorithm. Several combinatorial optimization problems can be solved with NISQ devices once that a corresponding quadratic unconstrained binary optimization (QUBO) form is derived. Numerous techniques have been proposed to achieve such reformulations and, depending on the method chosen, the number of binary variables required, and therefore of qubits, can vary considerably. The aim of this work is to drastically reduce the variables needed for these QUBO reformulations in order to unlock the possibility to efficiently obtain optimal solutions for a class of optimization problems with NISQ devices. This goal is achieved by introducing novel tools that allow an efficient use of slack variables, even for problems with non-linear constraints, without the need to approximate the starting problem. We divide our new techniques in two independent parts, called the iterative quadratic polynomial and the master-satellite methods. Hence, we show how to apply our techniques in case of an NP-hard optimization problem inspired by a real-world financial scenario called Max-Profit Balance Settlement . We follow by submitting several instances of this problem to two D-wave quantum annealers, comparing the performances of our novel approach with the standard methods used in these scenarios. Moreover, this study allows to appreciate several performance differences between the D-wave Advantage and next-generation Advantage2 quantum annealers. We show that the adoption of our techniques in this context allows to obtain QUBO formulations with significantly fewer slack variables, i.e. around 90% less, and D-wave annealers provide considerably higher correct solution rates, which moreover do not decrease with the input size as fast as when adopting standard techniques.
The quantum annealing devices, which encode the solution to a computational problem in the ground state of a quantum Hamiltonian, are implemented in D-Wave systems with more than 2,000 qubits. However, quantum annealing can solve only a classical combinatorial optimization problem such as an Ising model, or equivalently, a quadratic unconstrained binary optimization (QUBO) problem. In this paper, we formulate the QUBO model to solve elliptic problems with Dirichlet and Neumann boundary conditions using the finite element method. In this formulation, we develop the objective function of quadratic binary variables represented by qubits and the system finds the binary string combination minimizing the objective function globally. Based on the QUBO formulation, we introduce an iterative algorithm to solve the elliptic problems. We discuss the validation of the modeling on the D-Wave quantum annealing system.
Quantum annealing is getting increasing attention in combinatorial optimization. The quantum processing unit by D-Wave is constructed to approximately solve Ising models on so-called Chimera graphs. Ising models are equivalent to quadratic unconstrained binary optimization (QUBO) problems and maximum cut problems on the associated graphs. We have tailored branch-and-cut as well as semidefinite programming algorithms for solving Ising models for Chimera graphs to provable optimality and use the strength of these approaches for comparing our solution values to those obtained on the current quantum annealing machine, D-Wave 2000Q. This allows for the assessment of the quality of solutions produced by the D-Wave hardware. In addition, we also evaluate the performance of a heuristic by Selby. It has been a matter of discussion in the literature how well the D-Wave hardware performs at its native task, and our experiments shed some more light on this issue. In particular, we examine how reliably the D-Wave computer can deliver true optimum solutions and present some surprising results.
Commercial adiabatic quantum annealers have the potential to solve important NP-hard optimization problems efficiently. The newest generation of those machines additionally allows the user to customize the anneal schedule, that is, the schedule with which the anneal fraction is changed from the start to the end of the annealing. In this work we use the aforementioned feature of the D-Wave 2000Q to attempt to monitor how the anneal solution evolves during the anneal process. This process we call slicing: at each time slice during the anneal, we are able to obtain an approximate distribution of anneal solutions. We use our technique to obtain a variety of insights into the D-Wave 2000Q. For example, we observe when individual bits flip during the anneal process and when they stabilize, which allows us to determine the freeze-out point for each qubit individually. We highlight our results using both random QUBO (quadratic unconstrained binary optimization) instances and, for better visualization, instances which we specifically optimize (using our own genetic algorithm) to exhibit a pronounced evolution of its solution during the anneal.