Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2102.05830 · Scientific Reports

Dynamic compensation of stray electric fields in an ion trap using machine learning and adaptive algorithm

Moji Ghadimi, Alexander Zappacosta, Jordan Scarabel, Kenji Shimizu, Erik W. Streed, Mirko Lobino

Published Apr 29, 2022• 3 citations
arXivHTMLPDF

Abstract

Surface ion traps are among the most promising technologies for scaling up quantum computing machines, but their complicated multi-electrode geometry can make some tasks, including compensation for stray electric fields, challenging both at the level of modeling and of practical implementation. Here we demonstrate the compensation of stray electric fields using a gradient descent algorithm and a machine learning technique, which trained a deep learning network. We show automated dynamical compensation tested against induced electric charging from UV laser light hitting the chip trap surface. The results show improvement in compensation using gradient descent and the machine learner over manual compensation. This improvement is inferred from an increase of the fluorescence rate of 78% and 96% respectively, for a trapped [Formula: see text]Yb[Formula: see text] ion driven by a laser tuned to [Formula: see text] MHz of the [Formula: see text]S[Formula: see text]P[Formula: see text] Doppler cooling transition at 369.5 nm.

DOI
10.1038/s41598-022-11142-7

Related papers

Minimization of the micromotion of trapped ions with artificial neural networks

Yang Liu, Qifeng Lao, Pengfei Lu +8 more

Minimizing the micromotion of a trapped ion in a linear Paul trap is of great importance in maintaining long coherence time as well as implementing quantum logic gates with high fidelity, which is crucial for large-scale quantum computation with trapped ions. Here, by applying the RF (radio frequency)-photon correlation technique, we demonstrate that a machine learning method based on artificial neural networks can quickly search for optimal voltage settings of the electrodes to minimize the trapped ion's micromotion. This machine learning assisted RF-photon correlation technique can be straightforwardly applied to more complicated surface ion traps with many electrodes, where the manual minimization of the excess micromotion generated by stray electric fields would become extremely challenging for the larger number of electrodes with various voltage settings. Instead, the presented machine learning assisted method provides an effective and automatic way to address this need.

arXiv:2103.02231•Applied Physics Letters•Sep 27, 2021•8 citations

Sensitive, 3D micromotion compensation in a surface-electrode ion trap

Amira M. Eltony

Following successful demonstrations of quantum algorithms and error correction with a handful of trapped ions in a macroscopic, machined Paul trap, there is a growing effort to move towards microfabricated traps with all the electrodes on a single chip.These traps, known as surface-electrode ion traps, are more amenable to being shrunk in size and replicated, or integrated with optical components and electronic devices.However, in the shift towards surface-electrode traps, and as traps are miniaturized in general, laser beams are brought closer to electrode surfaces, exacerbating laserinduced charging.Because of their charge, trapped ions are extremely sensitive to stray charges that accumulate on the trap surface.The DC potentials caused by stray charge displace the ion from the null of the RF trapping field, resulting in a fast, driven motion of the ion (known as micromotion) which hinders quantum operations by broadening transitions and causing decoherence.In a surface trap, micromotion detection is difficult as the laser beams used for measurement typically cannot crash into the trap, obscuring ion offsets out of the trap plane.Existing methods for micromotion detection permit ion positioning accurate to the ground state wavepacket size (of order 10 nm), but cannot identify ion offsets out of the trap plane with the same accuracy.Schemes for sensitive compensation often have restrictive requirements such as access to a narrow atomic transition.We introduce a new approach, which permits out-of-plane micromotion compensation to within 10s of nanometers with minimal overhead.Our technique synchronously detects ion excitation along the trap axes when it is driven by secular-frequency sidebands added to the RF electrodes; the excitation amplitude is proportional to the offset from the RF null.We make a detailed theoretical comparison with other techniques for micromotion compensation and demonstrate our technique experimentally.

•Jan 1, 2013•4 citations

Micromotion compensation using dark and bright ion species

Orr Barnea, Dror Einav, Jonas Drotleff +2 more

Stray electric fields induce excess micromotion in ion traps, limiting experimental performance. We present a new micromotion-compensation technique that utilizes a dark ion in a multi-species bright-dark-bright linear ion crystal. Stray electric fields in the radial plane of the trap deform the crystal axially due to the different masses of dark and bright ions. We exploit the mode softening near the transition to the zig-zag configuration to enhance the crystal deformation and, as a result, increase the method’s sensitivity dramatically. We corroborate our results with a modified ion-displacement compensation method using a single bright ion. Our modification allows us to compensate stray fields on the 2D radial plane from a 1D measurement of the ion position on the camera by controlling the asymmetry of the two radial modes of the trap. Both methods require only a fixed imaging camera and continuous ion-fluorescence detection. As such, they can be readily implemented in most ion-trapping experiments without additional hardware modifications.

arXiv:2503.12417•Frontiers in Quantum Science and Technology•Jul 1, 2025•1 citation

A Silicon Surface Ion-Trap Chip with Dielectric Sidewalls Shielded by Metal Films

홍석준

An ion trap is a device to confine charged particles by utilizing electromagnetic fields. Since the trapped ions have a feasibility of the individual state manipulation, a long coherence time, and an ideal isolation from the surroundings, the ion-trap technology becomes one of the leading candidates for the physical implementation of quantum information processing. In order to build a large-scale integrated ion-trap system for realizing complex quantum algorithms, microfabrication technologies have been applied to construct ion traps. The use of micro-electro-mechanical system (MEMS) ion-trap chip allows a scalable architecture of ion-trap arrays and integration of functional components to the trap chip, but a few side effects also arise. One of the most particular problems is stray fields generated by the charges accumulated on the sidewalls of thick dielectric pillars or the native oxide grown on metal surfaces, since the stray fields lead to ion micromotions which can cause heating and escape of the trapped ions. This dissertation presents a silicon surface ion-trap chip with dielectric sidewalls shielded by metal films. The oxide pillars supporting the top electrodes are fabricated to have overhang structures, and the upper and lower part of the pillars are coated by separate aluminum layers which are electrically isolated from each other. In order to evaluate the effects of the native metal oxide on the electrode surface to the charging phenomenon, a trap chip with an additional gold layer on the aluminum electrodes is also fabricated. An ultra-high vacuum (UHV) chamber, electrical connections, and an optical setup are prepared to trap 174Yb+ ions, and the ions are successfully trapped by using the experimental setup including the fabricated ion-trap chip. To evaluate the effectiveness of the proposed electrode structures, charging is intentionally induced on the chip surface by injecting a 355-nm pulse laser with 40-μW power perpendicularly to the chip surface. The intensity of the stray field is estimated by measuring the displacement of ion position after charging is induced. When the Al-based chips with exposed and Al-coated dielectric sidewalls are used, the standard deviation of the intensities of stray fields are 3.53, and 5.63 V/m, respectively. However, the standard deviation of the intensity of stray fields in the case of using Au-coated chip is 1.56 V/m, and any stray field is measured when the laser was injected on the surface or sidewalls of the gold-coated electrodes. These experimental results indicate that the gold coating on the surface of the aluminum electrodes and the sidewalls of dielectric pillars is effective for eliminating the generation of stray fields induced by static charges.

•Jan 1, 2017•0 citations

Method for Estimating Locations of Laser-Induced Stray Charges on Surface-Electrode Ion Traps Using Secular Frequency Shift at Multiple Ion Positions

Changhyun Jung, Junho Jeong, Seungwoo Yoo +2 more

This paper develops a method for estimating the locations of laser-induced stray charges on surface-electrode ion traps. How the electric potential at the trapped-ion location changes in the presence of laser-induced stray charges is theoretically modeled, and the magnitude of the shift in the secular frequency of a trapped ion is derived from the model. This model can be used inversely to find the locations of stray charges from the secular frequency shift under certain conditions. Typically, this inverse relationship is not unique. However, in surface-electrode ion traps, the secular frequency shift caused by the stray charges can be measured at multiple ion positions, and therefore, the required number of secular-frequency-shift measurements can be performed to determine the stray-charge locations uniquely. This model is experimentally evaluated by intentionally producing electric charges at a single location by irradiating a laser onto that spot and by measuring the resulting secular frequency shift. The location of produced charges is estimated from the measured result, and the estimated location is consistent with where the laser is irradiating. The developed method can be applied to characterize the laser-induced stray charges, which in turn can be used to design experiments to avoid or reduce the occurrence of stray charges.

Physical Review Applied•Jul 17, 2023•2 citations

Photo-ionization Compensation of Stray Electric Fields for Cold Rydberg Atoms

Z Y Chen, Z. -X. Fu, Z. -R He +6 more

Neurtal atoms in optical tweezer arrays constitute a highly promising platform for quantum computing and quantum simulation. Their operation relies on precise control of the Rydberg excitation, which is highly sensitive to background electric fields. Here, we identify a previously overlooked source of stray electric fields arising from trapped charges within the antireflection coating layers of glass vacuum cells. In contrast to the conventional approach of removing surface charges through ultraviolet-light-induced desorption, we compensate these clamped charges by generating additional charges via photo-ionization of a cold atomic ensemble. We verify the resulting suppression of stray electric fields through Rydberg excitation spectroscopy in an atomic array and further confirm that the residual electric field inside the vacuum cell is effectively eradicated with the aid of external electrodes. Our work identifies and mitigates a previously unrecognized source of residual electric field, providing a practical solution for improving the performance of neutral atomic quantum processors and other Rydberg-based quantum technologies, as well as surface-sensitive atomic systems.

arXiv:2608.04660•Aug 5, 2026•1 citation
Surface ion traps are among the most promising technologies for scaling up quantum computing machines, but their complicated multi-electrode geometry can make some tasks, including compensation for stray electric fields, challenging both at the level of modeling and of practical implementation. Here we demonstrate the compensation of stray electric fields using a gradient descent algorithm and a machine learning technique, which trained a deep learning network. We show automated dynamical compensation tested against induced electric charging from UV laser light hitting the chip trap surface. The results show improvement in compensation using gradient descent and the machine learner over manual compensation. This improvement is inferred from an increase of the fluorescence rate of 78% and 96% respectively, for a trapped [Formula: see text]Yb[Formula: see text] ion driven by a laser tuned to [Formula: see text] MHz of the [Formula: see text]S[Formula: see text]P[Formula: see text] Doppler cooling transition at 369.5 nm.
Minimizing the micromotion of a trapped ion in a linear Paul trap is of great importance in maintaining long coherence time as well as implementing quantum logic gates with high fidelity, which is crucial for large-scale quantum computation with trapped ions. Here, by applying the RF (radio frequency)-photon correlation technique, we demonstrate that a machine learning method based on artificial neural networks can quickly search for optimal voltage settings of the electrodes to minimize the trapped ion's micromotion. This machine learning assisted RF-photon correlation technique can be straightforwardly applied to more complicated surface ion traps with many electrodes, where the manual minimization of the excess micromotion generated by stray electric fields would become extremely challenging for the larger number of electrodes with various voltage settings. Instead, the presented machine learning assisted method provides an effective and automatic way to address this need.
Following successful demonstrations of quantum algorithms and error correction with a handful of trapped ions in a macroscopic, machined Paul trap, there is a growing effort to move towards microfabricated traps with all the electrodes on a single chip.These traps, known as surface-electrode ion traps, are more amenable to being shrunk in size and replicated, or integrated with optical components and electronic devices.However, in the shift towards surface-electrode traps, and as traps are miniaturized in general, laser beams are brought closer to electrode surfaces, exacerbating laserinduced charging.Because of their charge, trapped ions are extremely sensitive to stray charges that accumulate on the trap surface.The DC potentials caused by stray charge displace the ion from the null of the RF trapping field, resulting in a fast, driven motion of the ion (known as micromotion) which hinders quantum operations by broadening transitions and causing decoherence.In a surface trap, micromotion detection is difficult as the laser beams used for measurement typically cannot crash into the trap, obscuring ion offsets out of the trap plane.Existing methods for micromotion detection permit ion positioning accurate to the ground state wavepacket size (of order 10 nm), but cannot identify ion offsets out of the trap plane with the same accuracy.Schemes for sensitive compensation often have restrictive requirements such as access to a narrow atomic transition.We introduce a new approach, which permits out-of-plane micromotion compensation to within 10s of nanometers with minimal overhead.Our technique synchronously detects ion excitation along the trap axes when it is driven by secular-frequency sidebands added to the RF electrodes; the excitation amplitude is proportional to the offset from the RF null.We make a detailed theoretical comparison with other techniques for micromotion compensation and demonstrate our technique experimentally.
Stray electric fields induce excess micromotion in ion traps, limiting experimental performance. We present a new micromotion-compensation technique that utilizes a dark ion in a multi-species bright-dark-bright linear ion crystal. Stray electric fields in the radial plane of the trap deform the crystal axially due to the different masses of dark and bright ions. We exploit the mode softening near the transition to the zig-zag configuration to enhance the crystal deformation and, as a result, increase the method’s sensitivity dramatically. We corroborate our results with a modified ion-displacement compensation method using a single bright ion. Our modification allows us to compensate stray fields on the 2D radial plane from a 1D measurement of the ion position on the camera by controlling the asymmetry of the two radial modes of the trap. Both methods require only a fixed imaging camera and continuous ion-fluorescence detection. As such, they can be readily implemented in most ion-trapping experiments without additional hardware modifications.
An ion trap is a device to confine charged particles by utilizing electromagnetic fields. Since the trapped ions have a feasibility of the individual state manipulation, a long coherence time, and an ideal isolation from the surroundings, the ion-trap technology becomes one of the leading candidates for the physical implementation of quantum information processing. In order to build a large-scale integrated ion-trap system for realizing complex quantum algorithms, microfabrication technologies have been applied to construct ion traps. The use of micro-electro-mechanical system (MEMS) ion-trap chip allows a scalable architecture of ion-trap arrays and integration of functional components to the trap chip, but a few side effects also arise. One of the most particular problems is stray fields generated by the charges accumulated on the sidewalls of thick dielectric pillars or the native oxide grown on metal surfaces, since the stray fields lead to ion micromotions which can cause heating and escape of the trapped ions. This dissertation presents a silicon surface ion-trap chip with dielectric sidewalls shielded by metal films. The oxide pillars supporting the top electrodes are fabricated to have overhang structures, and the upper and lower part of the pillars are coated by separate aluminum layers which are electrically isolated from each other. In order to evaluate the effects of the native metal oxide on the electrode surface to the charging phenomenon, a trap chip with an additional gold layer on the aluminum electrodes is also fabricated. An ultra-high vacuum (UHV) chamber, electrical connections, and an optical setup are prepared to trap 174Yb+ ions, and the ions are successfully trapped by using the experimental setup including the fabricated ion-trap chip. To evaluate the effectiveness of the proposed electrode structures, charging is intentionally induced on the chip surface by injecting a 355-nm pulse laser with 40-μW power perpendicularly to the chip surface. The intensity of the stray field is estimated by measuring the displacement of ion position after charging is induced. When the Al-based chips with exposed and Al-coated dielectric sidewalls are used, the standard deviation of the intensities of stray fields are 3.53, and 5.63 V/m, respectively. However, the standard deviation of the intensity of stray fields in the case of using Au-coated chip is 1.56 V/m, and any stray field is measured when the laser was injected on the surface or sidewalls of the gold-coated electrodes. These experimental results indicate that the gold coating on the surface of the aluminum electrodes and the sidewalls of dielectric pillars is effective for eliminating the generation of stray fields induced by static charges.
This paper develops a method for estimating the locations of laser-induced stray charges on surface-electrode ion traps. How the electric potential at the trapped-ion location changes in the presence of laser-induced stray charges is theoretically modeled, and the magnitude of the shift in the secular frequency of a trapped ion is derived from the model. This model can be used inversely to find the locations of stray charges from the secular frequency shift under certain conditions. Typically, this inverse relationship is not unique. However, in surface-electrode ion traps, the secular frequency shift caused by the stray charges can be measured at multiple ion positions, and therefore, the required number of secular-frequency-shift measurements can be performed to determine the stray-charge locations uniquely. This model is experimentally evaluated by intentionally producing electric charges at a single location by irradiating a laser onto that spot and by measuring the resulting secular frequency shift. The location of produced charges is estimated from the measured result, and the estimated location is consistent with where the laser is irradiating. The developed method can be applied to characterize the laser-induced stray charges, which in turn can be used to design experiments to avoid or reduce the occurrence of stray charges.
Neurtal atoms in optical tweezer arrays constitute a highly promising platform for quantum computing and quantum simulation. Their operation relies on precise control of the Rydberg excitation, which is highly sensitive to background electric fields. Here, we identify a previously overlooked source of stray electric fields arising from trapped charges within the antireflection coating layers of glass vacuum cells. In contrast to the conventional approach of removing surface charges through ultraviolet-light-induced desorption, we compensate these clamped charges by generating additional charges via photo-ionization of a cold atomic ensemble. We verify the resulting suppression of stray electric fields through Rydberg excitation spectroscopy in an atomic array and further confirm that the residual electric field inside the vacuum cell is effectively eradicated with the aid of external electrodes. Our work identifies and mitigates a previously unrecognized source of residual electric field, providing a practical solution for improving the performance of neutral atomic quantum processors and other Rydberg-based quantum technologies, as well as surface-sensitive atomic systems.