Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2101.12726 · Quantum Science and Technology

An environmental monitoring network for quantum gas experiments and devices

Thomas J. Barrett, W Evans, Amruta Gadge, S. Bhumbra, S. Sleegers, Robert Shah, J. Fekete, Fedja Oručević, P. Krüger

Published Oct 26, 2021• 6 citations
arXivHTMLPDF

Abstract

Abstract Quantum technology is approaching a level of maturity, recently demonstrated in space-borne experiments and in-field measurements, which would allow for adoption by non-specialist users. Parallel advancements made in microprocessor-based electronics and database software can be combined to create robust, versatile and modular experimental monitoring systems. Here, we describe a monitoring network used across a number of cold atom laboratories with a shared laser system. The ability to diagnose malfunction, unexpected or unintended behavior and passively collect data for key experimental parameters, such as vacuum chamber pressure, laser beam power, or resistances of important conductors, significantly reduces debugging time. This allows for efficient control over a number of experiments and remote control when access is limited.

DOI
10.1088/2058-9565/ac3385

Related papers

Environmental monitoring system for cold atom experiments

Amruta Gadge, William Evans, Shobita Bhumbra +4 more

Quantum technology devices are approaching a level of maturity, which would allow for adoption by non-specialist users. The advancements made in microprocessor-based electronics and database software can be combined to create a flexible, efficient, and modular experimental monitoring system. We present an example of such a monitoring system where key experimental parameters such as vacuum pressure, laser beam powers and electrical currents across a network of cold atom laboratories are monitored. The ability to passively collect data and cross-diagnose issues reduces debugging time and allows for efficient control over several cold atom experiments. This level of control facilitates the progression of atomic physics experiments. In my talk, I will show how using such a monitoring system has led to the production of a Bose-Einstein condensate (BEC) from home in one of our laboratories that did not have a BEC before.

•Oct 2, 2020•0 citations

Towards Quantum Network Performance Metrics: Challenges and Demonstration

Mohamed Shaban, Mariam Kiran, Muhammad Ismail

As quantum networks move toward practical deployment, standardized performance monitoring becomes essential. This article proposes a structured monitoring framework for quantum networks with performance metrics, including quality (e.g., entanglement fidelity, QBER, loss, dark count rate), throughput and latency (e.g., entanglement rate, waiting time), timing (e.g., coincidence window, production and coincidence jitter), and exogenous factors (e.g., temperature, humidity, vibrations). These measurements enable real-time observability, benchmarking, and control, supporting use cases such as fault diagnosis, adaptive timing, and entanglement routing. Additionally, we implement a non-invasive prototype environmental monitoring system integrated with the quantum network infrastructure at Oak Ridge National Laboratory, demonstrating practical feasibility of live data collection and alert generation. Furthermore, we discuss the challenges of real-time monitoring and the trade-offs between observability and system performance. This work establishes a foundation for developing advanced quantum network monitoring systems and lays the groundwork for future autonomous control and quantum software-defined networking.

quant-pharXiv:2607.05642•Jul 8, 2026•0 citations

On the use of additive manufacturing for atom trapping components in quantum technologies

W. D. Evans

This thesis details the advances made in the use of additive manufacturing to produce magnetic field generating devices and vacuum components for atomic quantum technologies. Cold atomic clouds are used across a suite of quantum sensors including magnetometers, gravimeters and navigational interferometers; as these sensors approach industrial use, they must be translated from laboratory systems to portable devices. The discussion focuses on a number of devices that demonstrate the benefits provided by this approach. Specifically, the devices discussed are a current carrying cylinder trapping device, an ultra-high vacuum (UHV) chamber and a hollow-core coil mount device. This thesis also covers a range of auxiliary developments that have been made alongside the main body of work including a microprocessor-based control system and a pre-cooling stage for cold atom experiments. To begin this thesis reviews the underlying physical phenomena which are exploited when trapping neutral atoms. In particular, it is important to understand the details of the specific case when working with rubidium-87, including the relevant energy levels diagrams and corresponding laser frequencies. This allows for the discussion of the key forces that are used in magneto-optical trapping (MOT) and magnetic trapping including the origin of the magnetic fields generated by these devices using the Biot-Savart law. The key results that are presented in this thesis centre on the efficacy of these devices as atom traps for quantum technologies and atomic experiments. The atom trap cylinder is capable of trapping 108 rubidium atoms at a temperature of 20 µK, demonstrating the feasibility of this approach. The hollow coil mount device presents a viable route for magnetic trapping. Lastly, the UHV chamber operates in the range of 10-10 mbar as necessary for atomic physics experiments. In addition, this thesis reviews the design of a pre-cooling stage for complex atomic experiments and a simplified experimental control system. These are addressed in a systematic approach to the experimental constituents with a comparison between complex fundamental physics experiments and the developments made towards a portable quantum technology device.

•Dec 14, 2020•0 citations

Enhancing Environmental Monitoring through Object Detection in Quantum Networks

Pangi Vijaya Nirmala, S. Joshua Kumaresan, C. Senthilkumar +2 more

Environmental monitoring is essential for comprehending and addressing the consequences of climate change and pollution on our world. Conventional approaches to environmental monitoring and item detection have demonstrated efficacy, but frequently encounter drawbacks in terms of precision, immediate data collection, and resource utilization. This study investigates the potential of quantum networks to transform environmental monitoring by improving item detection skills. We performed a series of experiments to assess the effectiveness of our Quantum Network methodology in comparison to two established methodologies, Existing Method A and Existing Method B. The quantum network exhibited a notable enhancement in the precision of object detection, with an astounding accuracy of 95.6% in real-time data acquisition for air quality, temperature, and humidity measurements. The performance of this method exceeded the accuracies produced by the existing methods, which were 87.4% and 92.1% respectively. Although current approaches have been extensively used and provide established solutions for environmental monitoring, our quantum network demonstrated distinct benefits. It enhanced the precision of object detection, allowing for more exact gathering of data on crucial environmental characteristics. Furthermore, our methodology facilitated data collection in real time, rendering it exceptionally well-suited for applications that necessitate prompt adaptation to fluctuating environmental circumstances. Nevertheless, it is crucial to recognize that adopting quantum technology brings about intricacy and resource demands. The promise of the quantum network is contingent upon additional refinement and optimization to properly tackle these difficulties.

IEEE International Conference on Computing, Power and Communication Technologies (IC2PCT)•Feb 9, 2024•8 citations

Telemetry for Quantum Systems in HPC Centers

Hossam Ahmed, Burak Mete, Helmut Heller +7 more

Quantum systems have traditionally operated within highly controlled laboratory environments to minimize internal noise and maximize stability. However, when these systems are integrated into High Performance Computing (HPC) environments and setup for continuous operation, they encounter significantly higher levels of external noise and instability coupled with higher demands. This paper introduces a comprehensive framework to counter the challenges of maintaining the stability of operational quantum computers in such noisy HPC settings. We propose a novel system architecture that monitors and manages the environmental conditions of quantum computing systems using a broad set of sensors, enhancing their robustness and reliability. Our architecture is open and can be extended to other setups. It can serve as a blueprint for other sites as it spans quantum technologies and offers broad coverage. Ultimately, this data will be essential to facilitate advancements in machine learning to drive real-time error mitigation.

ISC High Performance (ISC)•Jun 1, 2025•1 citation

Testbeds should enable development of new calibration routines.

Kevin C Young

The performance of quantum computing hardware is nearly always limited by coherent errors arising from miscalibration.New methods for calibration have the potential to completely eliminate these errors.With quantum devices growing ever larger and more difficult to calibrate, the community needs new testing protocols, new post-processing routines, new controller designs, and new software frameworks that together enable quantum devices to operate at their peak.In this white paper, we argue that a central design goal of future testbeds should be to enable creative research and development into novel hardware calibration routines.We suggest this can be accomplished by a deep commitment to low-level transparency, carefully designed control infrastructure, and flexible software frameworks.Quantum computers are large-scale, integrated systems with many free parameters, each of which must be carefully and continuously calibrated to ensure optimal and stable performance.Extracting the system information needed for calibration demands very careful experiment design, and acting on this information effectively requires rapid post-processing and low-latency feedback.Doing this optimally is hard.Many of the most common techniques for calibrating contemporary devices are inefficient in both experimental and postprocessing resources, and still lead to suboptimal performance.Transparency -When calibrating quantum hardware, transparency is essential.Users cannot correct parameters that they don't know about.When developing calibration protocols, users require direct, lowlevel access to as many controllable device parameters as possible -any parameter that an experimentalist regularly adjusts should be accessible programmatically.This degree of control is essential for efficient calibration, which must be automated and free from high-latency, manual adjustments.To support this automation, clear and complete documentation of a device at the lowest level must be available to the users.This includes details of exactly what each parameter controls, its allowed ranges, and -ideally -a model for how it impacts qubit operations.While not strictly necessary, these models can provide shortcuts for the calibration routines-it is much easier to correct over-rotation errors if the calibration routine knows which parameters impact rotation angles.Not all parameters are adjustable, and uncontrolled environmental degrees of freedom can have serious impacts on the performance of the device.Temperature measurements, microwave powers, and even laser phase stabilization servo values should be measured, recorded, and exposed to users.In our own work with trapped ion hardware [2] we have observed strong correlations between gate error rates and laboratory temperatures.In similar situations, continuous monitoring of the temperature can enable feed-forward compensation to correct these errors, reducing drift.In our experience, however, environmental data was recorded by offline monitoring tools and was available to us only after our experimental colleagues happened to mention its existence.By explicitly and programmatically exposing side-channel information, testbed designers will enable future drift-control protocols that exploit adaptive, feed-forward techniques to monitor and correct for unstable environments.This approach can dramatically reduce the resource overhead demanded by tomographic protocols that leverage comparatively expensive quantum measurements.Calibration impacts every possible testbed application, and recorded details of device calibration should be made available to all users for all experimental runs.The ability to audit calibration data is critical for identifying inefficiencies in calibration protocols, as well as providing possible explanation of an algorithm's unexpected performance.Testbeds should therefore err on the side of over-reporting calibration data, and testbed designers must adopt a deep commitment to device transparency to maximize its value to the scientific community. SAND2021-14320CThis paper describes objective technical results and analysis.Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.

•Nov 28, 2022•0 citations
Abstract Quantum technology is approaching a level of maturity, recently demonstrated in space-borne experiments and in-field measurements, which would allow for adoption by non-specialist users. Parallel advancements made in microprocessor-based electronics and database software can be combined to create robust, versatile and modular experimental monitoring systems. Here, we describe a monitoring network used across a number of cold atom laboratories with a shared laser system. The ability to diagnose malfunction, unexpected or unintended behavior and passively collect data for key experimental parameters, such as vacuum chamber pressure, laser beam power, or resistances of important conductors, significantly reduces debugging time. This allows for efficient control over a number of experiments and remote control when access is limited.
Quantum technology devices are approaching a level of maturity, which would allow for adoption by non-specialist users. The advancements made in microprocessor-based electronics and database software can be combined to create a flexible, efficient, and modular experimental monitoring system. We present an example of such a monitoring system where key experimental parameters such as vacuum pressure, laser beam powers and electrical currents across a network of cold atom laboratories are monitored. The ability to passively collect data and cross-diagnose issues reduces debugging time and allows for efficient control over several cold atom experiments. This level of control facilitates the progression of atomic physics experiments. In my talk, I will show how using such a monitoring system has led to the production of a Bose-Einstein condensate (BEC) from home in one of our laboratories that did not have a BEC before.
As quantum networks move toward practical deployment, standardized performance monitoring becomes essential. This article proposes a structured monitoring framework for quantum networks with performance metrics, including quality (e.g., entanglement fidelity, QBER, loss, dark count rate), throughput and latency (e.g., entanglement rate, waiting time), timing (e.g., coincidence window, production and coincidence jitter), and exogenous factors (e.g., temperature, humidity, vibrations). These measurements enable real-time observability, benchmarking, and control, supporting use cases such as fault diagnosis, adaptive timing, and entanglement routing. Additionally, we implement a non-invasive prototype environmental monitoring system integrated with the quantum network infrastructure at Oak Ridge National Laboratory, demonstrating practical feasibility of live data collection and alert generation. Furthermore, we discuss the challenges of real-time monitoring and the trade-offs between observability and system performance. This work establishes a foundation for developing advanced quantum network monitoring systems and lays the groundwork for future autonomous control and quantum software-defined networking.
This thesis details the advances made in the use of additive manufacturing to produce magnetic field generating devices and vacuum components for atomic quantum technologies. Cold atomic clouds are used across a suite of quantum sensors including magnetometers, gravimeters and navigational interferometers; as these sensors approach industrial use, they must be translated from laboratory systems to portable devices. The discussion focuses on a number of devices that demonstrate the benefits provided by this approach. Specifically, the devices discussed are a current carrying cylinder trapping device, an ultra-high vacuum (UHV) chamber and a hollow-core coil mount device. This thesis also covers a range of auxiliary developments that have been made alongside the main body of work including a microprocessor-based control system and a pre-cooling stage for cold atom experiments. To begin this thesis reviews the underlying physical phenomena which are exploited when trapping neutral atoms. In particular, it is important to understand the details of the specific case when working with rubidium-87, including the relevant energy levels diagrams and corresponding laser frequencies. This allows for the discussion of the key forces that are used in magneto-optical trapping (MOT) and magnetic trapping including the origin of the magnetic fields generated by these devices using the Biot-Savart law. The key results that are presented in this thesis centre on the efficacy of these devices as atom traps for quantum technologies and atomic experiments. The atom trap cylinder is capable of trapping 108 rubidium atoms at a temperature of 20 µK, demonstrating the feasibility of this approach. The hollow coil mount device presents a viable route for magnetic trapping. Lastly, the UHV chamber operates in the range of 10-10 mbar as necessary for atomic physics experiments. In addition, this thesis reviews the design of a pre-cooling stage for complex atomic experiments and a simplified experimental control system. These are addressed in a systematic approach to the experimental constituents with a comparison between complex fundamental physics experiments and the developments made towards a portable quantum technology device.
Environmental monitoring is essential for comprehending and addressing the consequences of climate change and pollution on our world. Conventional approaches to environmental monitoring and item detection have demonstrated efficacy, but frequently encounter drawbacks in terms of precision, immediate data collection, and resource utilization. This study investigates the potential of quantum networks to transform environmental monitoring by improving item detection skills. We performed a series of experiments to assess the effectiveness of our Quantum Network methodology in comparison to two established methodologies, Existing Method A and Existing Method B. The quantum network exhibited a notable enhancement in the precision of object detection, with an astounding accuracy of 95.6% in real-time data acquisition for air quality, temperature, and humidity measurements. The performance of this method exceeded the accuracies produced by the existing methods, which were 87.4% and 92.1% respectively. Although current approaches have been extensively used and provide established solutions for environmental monitoring, our quantum network demonstrated distinct benefits. It enhanced the precision of object detection, allowing for more exact gathering of data on crucial environmental characteristics. Furthermore, our methodology facilitated data collection in real time, rendering it exceptionally well-suited for applications that necessitate prompt adaptation to fluctuating environmental circumstances. Nevertheless, it is crucial to recognize that adopting quantum technology brings about intricacy and resource demands. The promise of the quantum network is contingent upon additional refinement and optimization to properly tackle these difficulties.
Quantum systems have traditionally operated within highly controlled laboratory environments to minimize internal noise and maximize stability. However, when these systems are integrated into High Performance Computing (HPC) environments and setup for continuous operation, they encounter significantly higher levels of external noise and instability coupled with higher demands. This paper introduces a comprehensive framework to counter the challenges of maintaining the stability of operational quantum computers in such noisy HPC settings. We propose a novel system architecture that monitors and manages the environmental conditions of quantum computing systems using a broad set of sensors, enhancing their robustness and reliability. Our architecture is open and can be extended to other setups. It can serve as a blueprint for other sites as it spans quantum technologies and offers broad coverage. Ultimately, this data will be essential to facilitate advancements in machine learning to drive real-time error mitigation.
The performance of quantum computing hardware is nearly always limited by coherent errors arising from miscalibration.New methods for calibration have the potential to completely eliminate these errors.With quantum devices growing ever larger and more difficult to calibrate, the community needs new testing protocols, new post-processing routines, new controller designs, and new software frameworks that together enable quantum devices to operate at their peak.In this white paper, we argue that a central design goal of future testbeds should be to enable creative research and development into novel hardware calibration routines.We suggest this can be accomplished by a deep commitment to low-level transparency, carefully designed control infrastructure, and flexible software frameworks.Quantum computers are large-scale, integrated systems with many free parameters, each of which must be carefully and continuously calibrated to ensure optimal and stable performance.Extracting the system information needed for calibration demands very careful experiment design, and acting on this information effectively requires rapid post-processing and low-latency feedback.Doing this optimally is hard.Many of the most common techniques for calibrating contemporary devices are inefficient in both experimental and postprocessing resources, and still lead to suboptimal performance.Transparency -When calibrating quantum hardware, transparency is essential.Users cannot correct parameters that they don't know about.When developing calibration protocols, users require direct, lowlevel access to as many controllable device parameters as possible -any parameter that an experimentalist regularly adjusts should be accessible programmatically.This degree of control is essential for efficient calibration, which must be automated and free from high-latency, manual adjustments.To support this automation, clear and complete documentation of a device at the lowest level must be available to the users.This includes details of exactly what each parameter controls, its allowed ranges, and -ideally -a model for how it impacts qubit operations.While not strictly necessary, these models can provide shortcuts for the calibration routines-it is much easier to correct over-rotation errors if the calibration routine knows which parameters impact rotation angles.Not all parameters are adjustable, and uncontrolled environmental degrees of freedom can have serious impacts on the performance of the device.Temperature measurements, microwave powers, and even laser phase stabilization servo values should be measured, recorded, and exposed to users.In our own work with trapped ion hardware [2] we have observed strong correlations between gate error rates and laboratory temperatures.In similar situations, continuous monitoring of the temperature can enable feed-forward compensation to correct these errors, reducing drift.In our experience, however, environmental data was recorded by offline monitoring tools and was available to us only after our experimental colleagues happened to mention its existence.By explicitly and programmatically exposing side-channel information, testbed designers will enable future drift-control protocols that exploit adaptive, feed-forward techniques to monitor and correct for unstable environments.This approach can dramatically reduce the resource overhead demanded by tomographic protocols that leverage comparatively expensive quantum measurements.Calibration impacts every possible testbed application, and recorded details of device calibration should be made available to all users for all experimental runs.The ability to audit calibration data is critical for identifying inefficiencies in calibration protocols, as well as providing possible explanation of an algorithm's unexpected performance.Testbeds should therefore err on the side of over-reporting calibration data, and testbed designers must adopt a deep commitment to device transparency to maximize its value to the scientific community. SAND2021-14320CThis paper describes objective technical results and analysis.Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.