Temporal noise correlations are ubiquitous in quantum systems, yet often neglected in the analysis of quantum circuits due to the complexity required to accurately characterize and model them. Autoregressive moving average (ARMA) models are a well-known technique from time series analysis that model time correlations in data. By identifying the space of completely positive trace preserving (CPTP) quantum operations with a particular matrix manifold, we generalize ARMA models to the space of CPTP maps to parametrize and simulate temporally correlated noise in quantum circuits. This approach, denoted Schr\"odinger wave ARMA (SchWARMA), provides a natural path for generalization of classic techniques from signal processing, control theory, and system identification for which ARMA models and linear systems are essential. This enables the broad theory of classical signal processing to be applied to quantum system simulation, characterization, and noise mitigation.
Temporal noise correlations are ubiquitous in quantum systems, yet often neglected in the analysis of quantum circuits due to the complexity required to accurately characterize and model them. Autoregressive moving average (ARMA) models are a well-known technique from time series analysis that model time correlations in data. By identifying the space of completely positive trace preserving (CPTP) quantum operations with a particular matrix manifold, we generalize ARMA models to the space of CPTP maps to parametrize and simulate temporally correlated noise in quantum circuits. This approach, denoted Schr"odinger wave ARMA (SchWARMA), provides a natural path for generalization of classic techniques from signal processing, control theory, and system identification for which ARMA models and linear systems are essential. This enables the broad theory of classical signal processing to be applied to quantum system simulation, characterization, and noise mitigation.
Qubit noise spectroscopy (QNS) is a valuable tool for both the characterization of a qubit's environment and as a precursor to more effective qubit control to improve qubit fidelities. Existing approaches to QNS are what the classical spectrum estimation literature would call "non-parametric" approaches, in that a series of probe sequences are used to estimate noise power at a set of points or bands. In contrast, model-based approaches to spectrum estimation assume additional structure in the form of the spectrum and leverage this for improved statistical accuracy or other capabilities, such as superresolution. Here, we derive model-based QNS approaches using inspiration from classical signal processing, primarily though the recently developed Schrodinger wave autoregressive moving-average (SchWARMA) formalism for modeling correlated noise. We show, through both simulation and experimental data, how these model-based QNS approaches maintain the statistical and computational benefits of their classical counterparts, resulting in powerful new estimation approaches. Beyond the direct application of these approaches to QNS and quantum sensing, we anticipate that the flexibility of the underlying models will find utility in adaptive feedback control for quantum systems, in analogy with their role in classical adaptive signal processing and control.
Combining tensor network techniques with quantum autoregressive moving average models, we quantify the effects of time-correlated noise on quantum algorithms and predict their performance at scale. As a paradigmatic test case, we examine the quantum Fourier transformation. Building on our first technical result, which shows how stochastic tensor network calculations capture frequency correlations, our second result is the revelation that infidelity exponents (scaling from diffuse, to superdiffuse) are determined by the spectral features of the noise. This numerical result rigorously quantifies the common belief that the temporal correlation scale is a key predictive feature of noise's deleterious impact on multi-qubit circuits. To highlight prospects for predicting algorithmic performance, our third result quantifies how infidelity scaling exponents -- which are fits determined by training data at moderate scales (40-80 qubits) -- can be used to predict more computationally expensive simulation at larger scales (100-128 qubits). Aside from highlighting the scalability of our methods, this workflow feeds into our last result, which is the proposal of predictive benchmarking protocols connecting simulations to experiments. Our work paves the way for large-scale algorithmic simulations and performance prediction under hardware-relevant noise conditions informed by realistic device characteristics.
We present and validate a method for noise injection of arbitrary spectra in quantum circuits that can be applied to any system capable of executing arbitrary single qubit rotations, including cloud-based quantum processors. As the consequences of temporally correlated noise on the performance of quantum algorithms are not well understood, the capability to engineer and inject such noise in quantum systems is paramount. To date, noise injection capabilities have been limited and highly platform specific, requiring low-level access to control hardware. We experimentally validate our method by comparing to a direct hardware-based noise-injection scheme. Using a combination of quantum noise spectroscopy and classical signal analysis, we show that the two approaches agree. These results showcase a highly versatile method for noise injection that can be utilized by theoretical and experimental researchers to verify, evaluate, and improve quantum characterization protocols and quantum algorithms for sensing and computing.
In quantum computing, characterizing the full noise profile of qubits can aid in increasing coherence times and fidelities by developing error-mitigating techniques specific to the noise present. This characterization also supports efforts in advancing device fabrication to remove sources of noise. Qubit properties can be subject to non-trivial correlations in space and time, for example, spin qubits in MOS quantum dots are exposed to noise originating from the complex glassy behavior of two-level fluctuator ensembles. Engineering progress in spin qubit experiments generates large amounts of data, necessitating analysis techniques from fields experienced in managing large data sets. Fields such as astrophysics, finance, and climate science use wavelet-based methods to enhance their data analysis. Here, we propose and demonstrate wavelet-based analysis techniques to decompose signals into frequency and time components, enhancing our understanding of noise sources in qubit systems by identifying features at specific times. We apply the analysis to a state-of-the-art two-qubit experiment in a pair of SiMOS quantum dots with feedback applied to relevant operation variables. The observed correlations serve to identify common microscopic causes of noise, such as two-level fluctuators and hyperfine coupled nuclei, as well as to elucidate pathways for multi-qubit operation with more scalable feedback systems.
Quantum computing holds the promise of transforming computational paradigms across science and engineering. But realizing potential on near term hardware demands on understanding of the noise processes that corrupt quantum circuit outputs. On superconducting processors, fragile qubits are continuously subjected to environmental disturbances including T1 relaxation, charge noise, and magnetic flux drift that cause measurement statistics to evolve in a nonstationary manner across repeated circuit executions, undermining the reliability of any result aggregated over a long experimental session. In this work, we treat the sequence of bitstring count outcomes from repeated executions of a fixed quantum circuit as a time series and conduct a systematic statistical investigation of its structure. The first contribution is constructing a predictive model of circuit output, demonstrating that future measurement outcomes can be forecast by exploiting temporal correlations in the execution record. We then extend the analysis to two circuits sharing the same physical qubit, examining cross-series dependencies and evaluating whether the drift behavior of one circuit can inform predictions about the other. The temporal structure of the signals is characterized in depth. The other contribution of this dissertation is to perform Wavelet-based multifractal analysis to reveal that quantum circuit outputs exhibit genuine multifractality. This is a hallmark of long range correlated, scale free processes rather than the simple Gaussian white noise assumed by standard error models. Complementary frequency-domain analysis identifies a residual 1/f noise component that persists after linear detrending, consistent with charge and flux noise mechanisms well documented in superconducting qubit literature. Motivated by these findings, The other contribution is to design and evaluate a suite of drift-mitigation filters including piecewise Huber regression, rolling median, smoothing spline, and Savitzky–Golay approaches under a rigorous chronological train/test protocol that mimics real operational deployment. The smoothing spline and median filter achieve near-zero corrected bias, while the rolling median emerges as the preferred solution for online, shot-by-shot correction due to its causal update structure and maximal robustness to impulsive hardware events. Taken together, our results characterize quantum circuit outputs as non-stationary, multifractal processes exhibiting long memory, seasonality, and inter-circuit causality, and establish a principled filtering framework for mitigating temporal bias drift in NISQ era quantum hardware.
As quantum devices make steady progress towards intermediate scale and fault-tolerant quantum computing, it is essential to develop rigorous and efficient measurement protocols that account for known sources of noise. Most existing quantum characterization protocols such as gate-set tomography and randomized benchmarking assume the noise acting on the qubits is Markovian. However, this assumption is often not valid, as for the case of 1/f charge noise or hyperfine nuclear spin noise. Here, we present a general framework for quantum process tomography (QPT) in the presence of time-correlated noise. We further introduce fidelity benchmarks that quantify the relative strength of different sources of Markovian and non-Markovian noise. As an application of our method, we perform a comparative theoretical and experimental analysis of silicon spin qubits. We first develop a detailed noise model that accounts for the dominant sources of noise and validate the model against experimental data. Applying our framework for time-correlated QPT, we find that the number of independent parameters needed to characterize one- and two-qubit gates can be compressed by 10× and 100× , respectively, when compared to the fully generic case. These compressions reduce the amount of tomographic measurements needed in experiment, while also significantly speeding up numerical simulations of noisy quantum circuit dynamics compared to time-dependent Hamiltonian simulation. Using this compressed noise model, we find good agreement between our theoretically predicted process fidelities and two-qubit interleaved randomized benchmarking fidelities of 99.8% measured in recent experiments on silicon spin qubits. More broadly, our formalism can be directly extended to develop efficient and scalable tuning protocols for high-fidelity control of large arrays of quantum devices with non-Markovian noise. Published by the American Physical Society 2024