Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2307.14432 · PRX Quantum

Compressed Gate Characterization for Quantum Devices with Time-Correlated Noise

Michael J. Gullans, M. Caranti, Adam Mills, J. R. Petta

Published Jan 18, 2024• 11 citations
arXivHTMLPDF

Abstract

As quantum devices make steady progress towards intermediate scale and fault-tolerant quantum computing, it is essential to develop rigorous and efficient measurement protocols that account for known sources of noise. Most existing quantum characterization protocols such as gate-set tomography and randomized benchmarking assume the noise acting on the qubits is Markovian. However, this assumption is often not valid, as for the case of 1/f charge noise or hyperfine nuclear spin noise. Here, we present a general framework for quantum process tomography (QPT) in the presence of time-correlated noise. We further introduce fidelity benchmarks that quantify the relative strength of different sources of Markovian and non-Markovian noise. As an application of our method, we perform a comparative theoretical and experimental analysis of silicon spin qubits. We first develop a detailed noise model that accounts for the dominant sources of noise and validate the model against experimental data. Applying our framework for time-correlated QPT, we find that the number of independent parameters needed to characterize one- and two-qubit gates can be compressed by 10× and 100× , respectively, when compared to the fully generic case. These compressions reduce the amount of tomographic measurements needed in experiment, while also significantly speeding up numerical simulations of noisy quantum circuit dynamics compared to time-dependent Hamiltonian simulation. Using this compressed noise model, we find good agreement between our theoretically predicted process fidelities and two-qubit interleaved randomized benchmarking fidelities of 99.8% measured in recent experiments on silicon spin qubits. More broadly, our formalism can be directly extended to develop efficient and scalable tuning protocols for high-fidelity control of large arrays of quantum devices with non-Markovian noise. Published by the American Physical Society 2024

DOI
10.1103/prxquantum.5.010306

Related papers

Quantum non-Markovian noise in randomized benchmarking of spin-boson models

Srilekha Gandhari, Michael J. Gullans

In non-Markovian systems, the current state of the system depends on the full or partial history of its past evolution. Owing to these time correlations, non-Markovian noise violates common assumptions in gate characterization protocols such as randomized benchmarking and gate-set tomography. Here, we perform a case study of the effects of a quantum non-Markovian bath on qubit randomized benchmarking experiments. We consider a model consisting of qubits coupled to a multimode bosonic bath. We apply unitary operations on the qubits, interspersed with brief interactions with the environment governed by a Hamiltonian. Allowing for non-Markovianity in the interactions leads to clear differences in the randomized benchmarking decay curves in this model, which we analyze in detail. The Markovian model’s decay is exponential as expected, whereas the model with non-Markovian interactions displays a much slower, almost polynomial, decay. We develop efficient numerical methods for this problem that we use to support our theoretical results. These results inform efforts on incorporating quantum non-Markovian noise in the characterization and benchmarking of quantum devices.

arXiv:2502.14702•Physical Review Research•Feb 24, 2026•5 citations

Non-Markovian Quantum Process Tomography

Gregory A. L. White, Felix A. Pollock, Lloyd C. L. Hollenberg +2 more

Characterisation protocols have so far played a central role in the development of noisy intermediate-scale quantum (NISQ) computers capable of impressive quantum feats. This trajectory is expected to continue in building the next generation of devices: ones that can surpass classical computers for particular tasks -- but progress in characterisation must keep up with the complexities of intricate device noise. A missing piece in the zoo of characterisation procedures is tomography which can completely describe non-Markovian dynamics over a given time frame. Here, we formally introduce a generalisation of quantum process tomography, which we call process tensor tomography. We detail the experimental requirements, construct the necessary post-processing algorithms for maximum-likelihood estimation, outline the best-practice aspects for accurate results, and make the procedure efficient for low-memory processes. The characterisation is a pathway to diagnostics and informed control of correlated noise. As an example application of the hardware-agnostic technique, we show how its predictive control can be used to substantially improve multi-time circuit fidelities on superconducting quantum devices. Our methods could form the core for carefully developed software that may help hardware consistently pass the fault-tolerant noise threshold.

arXiv:2106.11722•PRX Quantum•May 27, 2022•108 citations

Benchmarking characterization methods for noisy quantum circuits

Megan Dahlhauser, Travis S. Humble

Effective methods for characterizing the noise in quantum computing devices are essential for programming and debugging circuit performance. Existing approaches vary in the information obtained as well as the amount of quantum and classical resources required, with more information generally requiring more resources. Here we benchmark the characterization methods of gate set tomography, Pauli channel noise reconstruction, and empirical direct characterization for developing models that describe noisy quantum circuit performance on a 27-qubit superconducting transmon device. We evaluate these models by comparing the accuracy of noisy circuit simulations with the corresponding experimental observations. We find that the agreement of noise model to experiment does not correlate with the information gained by characterization and that the underlying circuit strongly influences the best choice of characterization approach. Empirical direct characterization scales best of the methods we tested and produced the most accurate characterizations across our benchmarks.

arXiv:2201.02243•Physical Review A•Apr 17, 2024•15 citations

Efficient Noisy Quantum State and Process Tomography

Chenyang Li, Shengxin Zhuang, Yukun Zhang +4 more

Efficiently characterizing large quantum states and processes is a central yet notoriously challenging task in quantum information science, as conventional tomography methods typically require resources that grow exponentially with system size. Here, we introduce a structure-agnostic learning framework for noisy $n$-qubit quantum circuits under~i.i.d.~single-qubit noise. We first prove that quantum states with unital noise channels admit an efficient learnable representation in the logarithmic-depth regime. We then extend this framework to quantum process tomography under constant noise, deriving a unified protocol that applies to both unital and non-unital noisy channels and retains efficient guarantees for logarithmic-depth circuits. This process-learning formulation is input-agnostic and imposes no distributional assumptions on the input quantum states. We further study a more general regime with arbitrary noise strength. In this setting, low-weight Pauli propagation induces a terminal truncation whose threshold depends logarithmically on the inverse accuracy, leading to quasi-polynomial complexity and near-unit success probability in the average case. In contrast to the preceding two results, this arbitrary-noise guarantee does not impose any restriction on the circuit depth, and therefore covers arbitrary-depth circuits, including both the noiseless limit ($γ= 0$) and the strong-decoherence regime ($γ= Θ(1)$). Numerical simulations of two-dimensional Hamiltonian dynamics further demonstrate the accuracy and robustness of the approach, including for structured circuits beyond the random-circuit setting assumed in the theoretical analysis. These results provide a scalable and practically relevant route toward characterizing large-scale noisy quantum devices, addressing a key bottleneck in the development of quantum technologies.

quant-pharXiv:2603.01521•Quantum Science and Technology•Mar 3, 2026•2 citations

Extensions of Randomized Benchmarking

Marie Barnhill

The characterization of noisy quantum circuits is an important step in the development of large-scale quantum computers. As experimental quantum architectures approach the threshold for fault-tolerant quantum computing, obtaining a benchmark of process fidelities is needed to verify the integrity of the system and ensure functionality. Additionally, the ability to successfully implement a quantum code of choice may depend on the type of noise that is present in the system. It is therefore necessary to characterize not only the fidelity of the process, but also the structure of the noise. \n \nRandomized benchmarking is a characterization protocol which extracts partial information from a noisy quantum process. This thesis gives a detailed review of the randomized benchmarking protocol, and presents the results of three collaborative projects which use techniques similar to randomized benchmarking to obtain previously hidden information. The first protocol is designed to obtain a benchmark on loss errors. This protocol also provides information on the detector efficiency and an additional constraint on estimated parameters from randomized benchmarking. The second protocol is an extension of the first, under the special case of coherent leakage errors, for which we obtain an estimate of the leakage rate. The third protocol provides a method of testing for spatial correlations in noisy processes. This test may be used to determine the correlation structure of errors, and the error correcting codes needed for successful experiments in a particular architecture. All protocols presented in this thesis are scalable, platform-independent and insensitive to state preparation and measurement errors. We also provide results of numerical tests of these protocols for simulated noise, which show their accuracy and robustness.

•Aug 18, 2015•1 citation

A context-aware gate set tomography: Improving the self-consistent characterization of trapped-ion universal gate sets by leveraging non-Markovianity

Pablo Viñas, A. Bermudez

Abstract To progress in the characterization of noise for quantum computers, gate set tomography (GST) has emerged as a self-consistent protocol that accurately estimates noisy gates, state preparations, and measurements. In its original incarnation, GST improves estimation precision by applying gates sequentially, assuming the noise yields fixed completely-positive and trace-preserving (CPTP) maps independent of prior gate history. This ‘Markovian’ assumption can conflict with experiments, where time-correlated noise may induce non-Markovian dynamics, or slow drifts and cumulative calibration errors introduce context dependence, causing CP-divisible maps to vary with circuit depth. In this work, we address this issue for trapped-ion devices with phonon-mediated two-qubit gates. Using detailed microscopic modeling of high-fidelity light-shift gates, we tailor GST to capture the main source of context dependence: motional degrees of freedom. Rather than invalidating GST, context dependence can be incorporated into the gate-set parametrization, reducing sampling cost. Our results identify a promising research avenue that might be applicable to other platforms where microscopic modeling can be incorporated: the development of a context-aware GST.

arXiv:2507.02542•npj Quantum Information•Jun 26, 2026•2 citations
As quantum devices make steady progress towards intermediate scale and fault-tolerant quantum computing, it is essential to develop rigorous and efficient measurement protocols that account for known sources of noise. Most existing quantum characterization protocols such as gate-set tomography and randomized benchmarking assume the noise acting on the qubits is Markovian. However, this assumption is often not valid, as for the case of 1/f charge noise or hyperfine nuclear spin noise. Here, we present a general framework for quantum process tomography (QPT) in the presence of time-correlated noise. We further introduce fidelity benchmarks that quantify the relative strength of different sources of Markovian and non-Markovian noise. As an application of our method, we perform a comparative theoretical and experimental analysis of silicon spin qubits. We first develop a detailed noise model that accounts for the dominant sources of noise and validate the model against experimental data. Applying our framework for time-correlated QPT, we find that the number of independent parameters needed to characterize one- and two-qubit gates can be compressed by 10× and 100× , respectively, when compared to the fully generic case. These compressions reduce the amount of tomographic measurements needed in experiment, while also significantly speeding up numerical simulations of noisy quantum circuit dynamics compared to time-dependent Hamiltonian simulation. Using this compressed noise model, we find good agreement between our theoretically predicted process fidelities and two-qubit interleaved randomized benchmarking fidelities of 99.8% measured in recent experiments on silicon spin qubits. More broadly, our formalism can be directly extended to develop efficient and scalable tuning protocols for high-fidelity control of large arrays of quantum devices with non-Markovian noise. Published by the American Physical Society 2024
In non-Markovian systems, the current state of the system depends on the full or partial history of its past evolution. Owing to these time correlations, non-Markovian noise violates common assumptions in gate characterization protocols such as randomized benchmarking and gate-set tomography. Here, we perform a case study of the effects of a quantum non-Markovian bath on qubit randomized benchmarking experiments. We consider a model consisting of qubits coupled to a multimode bosonic bath. We apply unitary operations on the qubits, interspersed with brief interactions with the environment governed by a Hamiltonian. Allowing for non-Markovianity in the interactions leads to clear differences in the randomized benchmarking decay curves in this model, which we analyze in detail. The Markovian model’s decay is exponential as expected, whereas the model with non-Markovian interactions displays a much slower, almost polynomial, decay. We develop efficient numerical methods for this problem that we use to support our theoretical results. These results inform efforts on incorporating quantum non-Markovian noise in the characterization and benchmarking of quantum devices.
Characterisation protocols have so far played a central role in the development of noisy intermediate-scale quantum (NISQ) computers capable of impressive quantum feats. This trajectory is expected to continue in building the next generation of devices: ones that can surpass classical computers for particular tasks -- but progress in characterisation must keep up with the complexities of intricate device noise. A missing piece in the zoo of characterisation procedures is tomography which can completely describe non-Markovian dynamics over a given time frame. Here, we formally introduce a generalisation of quantum process tomography, which we call process tensor tomography. We detail the experimental requirements, construct the necessary post-processing algorithms for maximum-likelihood estimation, outline the best-practice aspects for accurate results, and make the procedure efficient for low-memory processes. The characterisation is a pathway to diagnostics and informed control of correlated noise. As an example application of the hardware-agnostic technique, we show how its predictive control can be used to substantially improve multi-time circuit fidelities on superconducting quantum devices. Our methods could form the core for carefully developed software that may help hardware consistently pass the fault-tolerant noise threshold.
Effective methods for characterizing the noise in quantum computing devices are essential for programming and debugging circuit performance. Existing approaches vary in the information obtained as well as the amount of quantum and classical resources required, with more information generally requiring more resources. Here we benchmark the characterization methods of gate set tomography, Pauli channel noise reconstruction, and empirical direct characterization for developing models that describe noisy quantum circuit performance on a 27-qubit superconducting transmon device. We evaluate these models by comparing the accuracy of noisy circuit simulations with the corresponding experimental observations. We find that the agreement of noise model to experiment does not correlate with the information gained by characterization and that the underlying circuit strongly influences the best choice of characterization approach. Empirical direct characterization scales best of the methods we tested and produced the most accurate characterizations across our benchmarks.
Efficiently characterizing large quantum states and processes is a central yet notoriously challenging task in quantum information science, as conventional tomography methods typically require resources that grow exponentially with system size. Here, we introduce a structure-agnostic learning framework for noisy nnn-qubit quantum circuits under~i.i.d.~single-qubit noise. We first prove that quantum states with unital noise channels admit an efficient learnable representation in the logarithmic-depth regime. We then extend this framework to quantum process tomography under constant noise, deriving a unified protocol that applies to both unital and non-unital noisy channels and retains efficient guarantees for logarithmic-depth circuits. This process-learning formulation is input-agnostic and imposes no distributional assumptions on the input quantum states. We further study a more general regime with arbitrary noise strength. In this setting, low-weight Pauli propagation induces a terminal truncation whose threshold depends logarithmically on the inverse accuracy, leading to quasi-polynomial complexity and near-unit success probability in the average case. In contrast to the preceding two results, this arbitrary-noise guarantee does not impose any restriction on the circuit depth, and therefore covers arbitrary-depth circuits, including both the noiseless limit (γ=0γ= 0γ=0) and the strong-decoherence regime (γ=Θ(1)γ= Θ(1)γ=Θ(1)). Numerical simulations of two-dimensional Hamiltonian dynamics further demonstrate the accuracy and robustness of the approach, including for structured circuits beyond the random-circuit setting assumed in the theoretical analysis. These results provide a scalable and practically relevant route toward characterizing large-scale noisy quantum devices, addressing a key bottleneck in the development of quantum technologies.
The characterization of noisy quantum circuits is an important step in the development of large-scale quantum computers. As experimental quantum architectures approach the threshold for fault-tolerant quantum computing, obtaining a benchmark of process fidelities is needed to verify the integrity of the system and ensure functionality. Additionally, the ability to successfully implement a quantum code of choice may depend on the type of noise that is present in the system. It is therefore necessary to characterize not only the fidelity of the process, but also the structure of the noise. \n \nRandomized benchmarking is a characterization protocol which extracts partial information from a noisy quantum process. This thesis gives a detailed review of the randomized benchmarking protocol, and presents the results of three collaborative projects which use techniques similar to randomized benchmarking to obtain previously hidden information. The first protocol is designed to obtain a benchmark on loss errors. This protocol also provides information on the detector efficiency and an additional constraint on estimated parameters from randomized benchmarking. The second protocol is an extension of the first, under the special case of coherent leakage errors, for which we obtain an estimate of the leakage rate. The third protocol provides a method of testing for spatial correlations in noisy processes. This test may be used to determine the correlation structure of errors, and the error correcting codes needed for successful experiments in a particular architecture. All protocols presented in this thesis are scalable, platform-independent and insensitive to state preparation and measurement errors. We also provide results of numerical tests of these protocols for simulated noise, which show their accuracy and robustness.
Abstract To progress in the characterization of noise for quantum computers, gate set tomography (GST) has emerged as a self-consistent protocol that accurately estimates noisy gates, state preparations, and measurements. In its original incarnation, GST improves estimation precision by applying gates sequentially, assuming the noise yields fixed completely-positive and trace-preserving (CPTP) maps independent of prior gate history. This ‘Markovian’ assumption can conflict with experiments, where time-correlated noise may induce non-Markovian dynamics, or slow drifts and cumulative calibration errors introduce context dependence, causing CP-divisible maps to vary with circuit depth. In this work, we address this issue for trapped-ion devices with phonon-mediated two-qubit gates. Using detailed microscopic modeling of high-fidelity light-shift gates, we tailor GST to capture the main source of context dependence: motional degrees of freedom. Rather than invalidating GST, context dependence can be incorporated into the gate-set parametrization, reducing sampling cost. Our results identify a promising research avenue that might be applicable to other platforms where microscopic modeling can be incorporated: the development of a context-aware GST.