Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2010.03559 · SciPost Physics

A scanning quantum cryogenic atom microscope at 6 K

Stephen Taylor, Fan Yang, Brandon A. Freudenstein, Benjamin Lev

Published Mar 9, 2021• 4 citations
arXivHTMLPDF

Abstract

The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) is a quantum sensor in which a quasi-1D quantum gas images electromagnetic fields emitted from a nearby sample. We report improvements to the microscope. Cryogen usage is reduced by replacing the liquid cryostat with a closed-cycle system and modified cold finger, and cryogenic cooling is enhanced by adding a radiation shield. The minimum accessible sample temperature is reduced from 35~K to 5.7~K while maintaining low sample vibrations. A new sample mount is easier to exchange, and quantum gas preparation is streamlined.

DOI
10.21468/scipostphys.10.3.060

Related papers

Sensing Magnetic Fields with a Giant Quantum Wave

József Fortágh, Andreas Günther

Microscopic imaging of local magnetic fields provides a window into the organizing principles of complex and technologically relevant condensed-matter materials.However, a wide variety of intriguing strongly correlated and topologically nontrivial materials exhibit poorly understood phenomena outside the detection capability of state-of-the-art high-sensitivity high-resolution scanning probe magnetometers.We introduce a quantum-noise-limited scanning probe magnetometer that can operate from room-to-cryogenic temperatures with unprecedented dc-field sensitivity and micron-scale resolution.The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) employs a magnetically levitated atomic Bose-Einstein condensate (BEC), thereby providing immunity to conductive and blackbody radiative heating.The SQCRAMscope has a field sensitivity of 1.4 nT per resolution-limited point (approximately 2 μm) or 6 nT= ffiffiffiffiffiffi Hz p per point at its duty cycle.Compared to point-by-point sensors, the long length of the BEC provides a naturally parallel measurement, allowing one to measure nearly 100 points with an effective field sensitivity of 600 pT= ffiffiffiffiffiffi Hz p for each point during the same time as a point-by-point scanner measures these points sequentially.Moreover, it has a noise floor of 300 pT and provides nearly 2 orders of magnitude improvement in magnetic flux sensitivity (down to 10 -6 Φ 0 = ffiffiffiffiffiffi Hz p ) over previous atomic probe magnetometers capable of scanning near samples.These capabilities are carefully benchmarked by imaging magnetic fields arising from microfabricated wire patterns in a system where samples may be scanned, cryogenically cooled, and easily exchanged.We anticipate the SQCRAMscope will provide charge-transport images at temperatures from room temperature to 4 K in unconventional superconductors and topologically nontrivial materials.

Physics•Mar 27, 2017•0 citations

Scanning Quantum Cryogenic Atom Microscope

Fan Yang, Alicia J. Kollár, Stephen Taylor +2 more

Microscopic imaging of local magnetic fields provides a window into the inner workings of complex and technologically relevant materials. The authors present an extremely sensitive scanning-probe microscope for imaging charge transport in strongly correlated and topologically nontrivial systems, from ambient down to liquid-helium temperature. This scanning quantum cryogenic atom microscope (SQCRAMscope) will change research spanning disciplines from basic condensed matter physics to the engineering of hybrid quantum systems.

arXiv:1608.06922•Physical Review Applied•Mar 27, 2017•39 citations

Imaging Nematic Transitions in Iron-Pnictide Superconductors with a Quantum Gas

Fan Yang, Stephen Taylor, Stephen D. Edkins +3 more

The SQCRAMscope is a recently realized Scanning Quantum CRyogenic Atom Microscope that utilizes an atomic Bose-Einstein condensate to measure magnetic fields emanating from solid-state samples. The quantum sensor does so with unprecedented DC sensitivity at micron resolution from room-to-cryogenic temperatures. An additional advantage of the SQCRAMscope is the preservation of optical access to the sample: Magnetometry imaging of, e.g., electron transport may be performed in concert with other imaging techniques. This multimodal imaging capability can be brought to bear with great effect in the study of nematicity in iron-pnictide high-temperature superconductors, where the relationship between electronic and structural symmetry-breaking resulting in a nematic phase is under debate. Here, we combine the SQCRAMscope with an in situ microscope that measures optical birefringence near the surface. This enables simultaneous and spatially resolved detection of both bulk and near-surface manifestations of nematicity via transport and structural deformation channels, respectively. By performing the first local measurement of emergent resistivity anisotropy in iron pnictides, we observe sharp, nearly concurrent transport and structural transitions. More broadly, these measurements demonstrate the SQCRAMscope's ability to reveal important insights into the physics of complex quantum materials.

arXiv:1907.12601•Bulletin of the American Physical Society•Jul 29, 2019•1 citation

A novel cryogenic scanning laser microscope tested on Josephson tunnel junctions

Jason D. Holm, J. Mygind

A novel cryogenic scanning laser microscope with a spatial resolution of less than 5 μm has been designed for on-chip in situ investigations of the working properties of normal and superconducting circuits and devices. The instrument relies on the detection of the electrical response of the circuit to a very localized heating induced by irradiation with 675 nm wavelength light from a semiconductor laser. The hot spot is moved by a specially designed piezoelectric scanner sweeping the tip of a single-mode optical fiber a few μm above the circuit. Depending on the scanner design the scanning area can be as large as 50×500 μm2 at 4.2 K. The microscope can be operated in the temperature range 2–300 K using a standard temperature controller. The central microscope body is mounted inside the vacuum can of a dip-stick-type cryoprobe. A damped spring system is used to reduce interference from extraneous mechanical vibrations. The microscope is integrated in a personal-computer-based data acquisition and control setup.

Review of Scientific Instruments•Sep 1, 1995•3 citations

Quantum-gas microscopes: a new tool for cold-atom quantum simulators

Stefan Kuhr

Imagine a new generation of computers that dramatically surpasses the most powerful supercomputers, being able to tackle the most challenging of computational problems. These problems arise, for example, in quantum physics where the computational power required to model a many-particle system increases exponentially with the number of its constituents, and as a consequence the calculations become prohibitively time-consuming. Nobel laureate Richard Feynman proposed this new type of computer in the early 1980s: ‘Let the computer itself be built of quantum mechanical elements which obey quantum mechanical laws.’ Such a quantum simulator would allow researchers to tackle challenging problems in condensed-matter physics. In particular many-body fermionic quantum systems are very difficult to compute due to the antisymmetric nature of the wave function, and the resulting sign problem for quantum Monte Carlo methods. This is why a quantum simulator will be an excellent test bed to investigate phenomena and properties of strongly correlated fermionic quantum systems. A powerful experimental platform to realize a quantum simulator is laser-cooled atoms [1] held in an artificial crystal of light, generated by superimposing laser beams. The atoms are kept in this optical lattice similar to marbles in the hollows of an egg carton, and they can mimic the behaviour of electrons in a real crystal. These systems interface atomic physics with condensed matter physics in a new way, as the tools of atomic physics allow for exquisite control of many experimental parameters, which are often inaccessible in solid state experiments. In-situ imaging techniques [2] using ‘quantum-gas microscopes’ constitute a new approach to the study of many-body quantum systems in an optical lattice with unprecedented resolution at the single-particle and single-site level [3,4]. This new method is complementary to earlier optical lattice experiments measuring distributions in momentum space after a time-of-flight expansion. A quantum-gas microscope uses an optical imaging system (Fig. 1a) for collecting the fluorescence light of ultracold atoms in an optical lattice with high spatial resolution comparable to the lattice spacing of ≈ 500 nm. (a) Atoms in optical lattice atoms are imaged with a high-resolution microscope objective [4]. (b) Single-site addressing is achieved by focussing a laser beam through the microscope onto selected atoms, bringing them into resonance with microwave radiation which produces spin flips [12]. (c) and (d) Single-atom-resolved fluorescence images of bosonic Mottinsulators [4,9]. (e) Deterministically prepared atom distribution using single-site addressing [12]. (f) Direct observation of single-atom quantum walks [15]. Fluorescence imaging of atoms in a quantum-gas microscope has made it possible to directly observe bosonic Mott insulators with single-atom resolution [4–6], giving access to in-situ measurements of temperature and entropy distributions. Subsequently, ground-breaking experiments in many-body quantum dynamics have been performed, such as the first direct observation of correlation spreading after quenches of the system to lower lattice depths [7]. Other experiments include the quantum simulation of an antiferromagnetic spin-1/2 chain [8], the realization of algorithmic cooling [9], the direct measurement of correlations across the superfluid-to-Mott-insulator transition [10], or the observation of the ‘Higgs’ amplitude mode [11]. The high-resolution imaging system is also capable of optically addressing individual atoms with sub-diffraction-limited resolution. For this purpose, a laser beam is focussed though the microscope objective onto selected lattice sites, bringing the atoms into resonance with microwave radiation which produces spin flips [12,13]. The preparation of arbitrary atom distributions in the lattice not only opens perspectives for neutral-atom quantum information processing, but also allows the deterministic creation of specific out-of-equilibrium situations, and their ensuing system dynamics can be studied with single-atom resolution. Examples include the creation of spin impurities and the study of their dynamics in a many-body system [14], the observation of quantum walks [15] and magnon-bound states [16], and the measurement of entanglement entropy [17]. The technique used for single-site-resolved detection of individual atoms in the optical lattice is fluorescence imaging. It requires laser cooling of the atoms to sub-Doppler temperatures while detecting the fluorescence photons emitted during this process. A challenge is to achieve a low particle loss rate and to prevent the atoms from hopping between lattice sites. In the case of the first quantum-gas microscopes, this has been implemented with bosonic rubidium-87 atoms, and also recently for ytterbium-174. However, it has proven more challenging for fermionic alkaline species such as potassium-40 and lithium-6, as their low mass and small excited state hyperfine splitting-prevented standard sub-Doppler cooling from working. As a result, it took several years to extend the quantum-gas microscope technique to fermionic species, and in 2015 several groups have demonstrated single-atom-resolved imaging of fermions [18]. In these setups, the direct observation of band insulators [19], fermionic Mott insulators [20,21] and even antiferromagnetic correlations [22] has been reported most recently. These developments provide fascinating opportunities to study many-body fermionic quantum systems with single-particle access. The fermionic nature of the electron is vital to understanding a range of phenomena within solid-state physics, such as electron pairing in superconductivity, and quantum magnetism. In this context, the quantum simulator will allow, e.g. for direct measurement of ordered quantum phases and out-of-equilibrium dynamics, with access to quantities such as spin--spin correlation functions and the growth of many-body entanglement. The high-resolution imaging systems could also be used to project tailored time-varying light fields onto the atoms, allowing the removal of high-entropy regions by locally modifying the confining potential to attain very low-entropy states. Attaining these low-entropy many-particle states is one of the key challenges in our field. In summary, quantum-gas microscopes offer unprecedented access to many-body quantum systems, and they will allow us to gain an even deeper insight into the intriguing world of quantum physics that governs the properties of strongly correlated materials. Using a well-controlled quantum system to simulate other quantum systems could help resolve some of the most challenging problems scientists face in condensed matter physics and materials science, but it will also provide new insights in quantum chemistry, high-energy physics and biology. SK acknowledges funding from the EU (ERC FERMILATT, SIQS, QuProCs) and SUPA.

arXiv:1606.06990•National Science Review•Apr 19, 2016•94 citations

Millikelvin confocal microscope with free-space access and high-frequency electrical control

Thomas Descamps, Feng Liu, Tobias Hangleiter +3 more

Cryogenic confocal microscopy is a powerful method for studying solid state quantum devices such as single photon sources and optically controlled qubits. While the vast majority of such studies have been conducted at temperatures of a few Kelvin, experiments involving fragile quantum effects often require lower operating temperatures. To also allow for electrical dynamic control, microwave connectivity is required. For polarization-sensitive studies, free space optical access is advantageous compared to fiber coupling. Here we present a confocal microscope in a dilution refrigerator providing all the above features at temperatures below 100 mK. The installed high frequency cabling meets the requirements for state-of-the-art spin qubit experiments. As another unique advantage of our system, the sample fitting inside a large puck can be exchanged while keeping the cryostat cold with minimal realignment. Assessing the performance of the instrument, we demonstrate confocal imaging, sub-nanosecond modulation of the emission wavelength of a suitable sample, and an electron temperature of 76 mK. While the instrument was constructed primarily with the development of optical interfaces to electrically controlled qubits in mind, it can be used for many experiments involving quantum transport, solid state quantum optics, and microwave-optical transducers.

arXiv:2401.03266•Review of Scientific Instruments•Aug 1, 2024•1 citation
The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) is a quantum sensor in which a quasi-1D quantum gas images electromagnetic fields emitted from a nearby sample. We report improvements to the microscope. Cryogen usage is reduced by replacing the liquid cryostat with a closed-cycle system and modified cold finger, and cryogenic cooling is enhanced by adding a radiation shield. The minimum accessible sample temperature is reduced from 35K to 5.7K while maintaining low sample vibrations. A new sample mount is easier to exchange, and quantum gas preparation is streamlined.
Microscopic imaging of local magnetic fields provides a window into the organizing principles of complex and technologically relevant condensed-matter materials.However, a wide variety of intriguing strongly correlated and topologically nontrivial materials exhibit poorly understood phenomena outside the detection capability of state-of-the-art high-sensitivity high-resolution scanning probe magnetometers.We introduce a quantum-noise-limited scanning probe magnetometer that can operate from room-to-cryogenic temperatures with unprecedented dc-field sensitivity and micron-scale resolution.The Scanning Quantum Cryogenic Atom Microscope (SQCRAMscope) employs a magnetically levitated atomic Bose-Einstein condensate (BEC), thereby providing immunity to conductive and blackbody radiative heating.The SQCRAMscope has a field sensitivity of 1.4 nT per resolution-limited point (approximately 2 μm) or 6 nT= ffiffiffiffiffiffi Hz p per point at its duty cycle.Compared to point-by-point sensors, the long length of the BEC provides a naturally parallel measurement, allowing one to measure nearly 100 points with an effective field sensitivity of 600 pT= ffiffiffiffiffiffi Hz p for each point during the same time as a point-by-point scanner measures these points sequentially.Moreover, it has a noise floor of 300 pT and provides nearly 2 orders of magnitude improvement in magnetic flux sensitivity (down to 10 -6 Φ 0 = ffiffiffiffiffiffi Hz p ) over previous atomic probe magnetometers capable of scanning near samples.These capabilities are carefully benchmarked by imaging magnetic fields arising from microfabricated wire patterns in a system where samples may be scanned, cryogenically cooled, and easily exchanged.We anticipate the SQCRAMscope will provide charge-transport images at temperatures from room temperature to 4 K in unconventional superconductors and topologically nontrivial materials.
Microscopic imaging of local magnetic fields provides a window into the inner workings of complex and technologically relevant materials. The authors present an extremely sensitive scanning-probe microscope for imaging charge transport in strongly correlated and topologically nontrivial systems, from ambient down to liquid-helium temperature. This scanning quantum cryogenic atom microscope (SQCRAMscope) will change research spanning disciplines from basic condensed matter physics to the engineering of hybrid quantum systems.
The SQCRAMscope is a recently realized Scanning Quantum CRyogenic Atom Microscope that utilizes an atomic Bose-Einstein condensate to measure magnetic fields emanating from solid-state samples. The quantum sensor does so with unprecedented DC sensitivity at micron resolution from room-to-cryogenic temperatures. An additional advantage of the SQCRAMscope is the preservation of optical access to the sample: Magnetometry imaging of, e.g., electron transport may be performed in concert with other imaging techniques. This multimodal imaging capability can be brought to bear with great effect in the study of nematicity in iron-pnictide high-temperature superconductors, where the relationship between electronic and structural symmetry-breaking resulting in a nematic phase is under debate. Here, we combine the SQCRAMscope with an in situ microscope that measures optical birefringence near the surface. This enables simultaneous and spatially resolved detection of both bulk and near-surface manifestations of nematicity via transport and structural deformation channels, respectively. By performing the first local measurement of emergent resistivity anisotropy in iron pnictides, we observe sharp, nearly concurrent transport and structural transitions. More broadly, these measurements demonstrate the SQCRAMscope's ability to reveal important insights into the physics of complex quantum materials.
A novel cryogenic scanning laser microscope with a spatial resolution of less than 5 μm has been designed for on-chip in situ investigations of the working properties of normal and superconducting circuits and devices. The instrument relies on the detection of the electrical response of the circuit to a very localized heating induced by irradiation with 675 nm wavelength light from a semiconductor laser. The hot spot is moved by a specially designed piezoelectric scanner sweeping the tip of a single-mode optical fiber a few μm above the circuit. Depending on the scanner design the scanning area can be as large as 50×500 μm2 at 4.2 K. The microscope can be operated in the temperature range 2–300 K using a standard temperature controller. The central microscope body is mounted inside the vacuum can of a dip-stick-type cryoprobe. A damped spring system is used to reduce interference from extraneous mechanical vibrations. The microscope is integrated in a personal-computer-based data acquisition and control setup.
Imagine a new generation of computers that dramatically surpasses the most powerful supercomputers, being able to tackle the most challenging of computational problems. These problems arise, for example, in quantum physics where the computational power required to model a many-particle system increases exponentially with the number of its constituents, and as a consequence the calculations become prohibitively time-consuming. Nobel laureate Richard Feynman proposed this new type of computer in the early 1980s: ‘Let the computer itself be built of quantum mechanical elements which obey quantum mechanical laws.’ Such a quantum simulator would allow researchers to tackle challenging problems in condensed-matter physics. In particular many-body fermionic quantum systems are very difficult to compute due to the antisymmetric nature of the wave function, and the resulting sign problem for quantum Monte Carlo methods. This is why a quantum simulator will be an excellent test bed to investigate phenomena and properties of strongly correlated fermionic quantum systems. A powerful experimental platform to realize a quantum simulator is laser-cooled atoms [1] held in an artificial crystal of light, generated by superimposing laser beams. The atoms are kept in this optical lattice similar to marbles in the hollows of an egg carton, and they can mimic the behaviour of electrons in a real crystal. These systems interface atomic physics with condensed matter physics in a new way, as the tools of atomic physics allow for exquisite control of many experimental parameters, which are often inaccessible in solid state experiments. In-situ imaging techniques [2] using ‘quantum-gas microscopes’ constitute a new approach to the study of many-body quantum systems in an optical lattice with unprecedented resolution at the single-particle and single-site level [3,4]. This new method is complementary to earlier optical lattice experiments measuring distributions in momentum space after a time-of-flight expansion. A quantum-gas microscope uses an optical imaging system (Fig. 1a) for collecting the fluorescence light of ultracold atoms in an optical lattice with high spatial resolution comparable to the lattice spacing of ≈ 500 nm. (a) Atoms in optical lattice atoms are imaged with a high-resolution microscope objective [4]. (b) Single-site addressing is achieved by focussing a laser beam through the microscope onto selected atoms, bringing them into resonance with microwave radiation which produces spin flips [12]. (c) and (d) Single-atom-resolved fluorescence images of bosonic Mottinsulators [4,9]. (e) Deterministically prepared atom distribution using single-site addressing [12]. (f) Direct observation of single-atom quantum walks [15]. Fluorescence imaging of atoms in a quantum-gas microscope has made it possible to directly observe bosonic Mott insulators with single-atom resolution [4–6], giving access to in-situ measurements of temperature and entropy distributions. Subsequently, ground-breaking experiments in many-body quantum dynamics have been performed, such as the first direct observation of correlation spreading after quenches of the system to lower lattice depths [7]. Other experiments include the quantum simulation of an antiferromagnetic spin-1/2 chain [8], the realization of algorithmic cooling [9], the direct measurement of correlations across the superfluid-to-Mott-insulator transition [10], or the observation of the ‘Higgs’ amplitude mode [11]. The high-resolution imaging system is also capable of optically addressing individual atoms with sub-diffraction-limited resolution. For this purpose, a laser beam is focussed though the microscope objective onto selected lattice sites, bringing the atoms into resonance with microwave radiation which produces spin flips [12,13]. The preparation of arbitrary atom distributions in the lattice not only opens perspectives for neutral-atom quantum information processing, but also allows the deterministic creation of specific out-of-equilibrium situations, and their ensuing system dynamics can be studied with single-atom resolution. Examples include the creation of spin impurities and the study of their dynamics in a many-body system [14], the observation of quantum walks [15] and magnon-bound states [16], and the measurement of entanglement entropy [17]. The technique used for single-site-resolved detection of individual atoms in the optical lattice is fluorescence imaging. It requires laser cooling of the atoms to sub-Doppler temperatures while detecting the fluorescence photons emitted during this process. A challenge is to achieve a low particle loss rate and to prevent the atoms from hopping between lattice sites. In the case of the first quantum-gas microscopes, this has been implemented with bosonic rubidium-87 atoms, and also recently for ytterbium-174. However, it has proven more challenging for fermionic alkaline species such as potassium-40 and lithium-6, as their low mass and small excited state hyperfine splitting-prevented standard sub-Doppler cooling from working. As a result, it took several years to extend the quantum-gas microscope technique to fermionic species, and in 2015 several groups have demonstrated single-atom-resolved imaging of fermions [18]. In these setups, the direct observation of band insulators [19], fermionic Mott insulators [20,21] and even antiferromagnetic correlations [22] has been reported most recently. These developments provide fascinating opportunities to study many-body fermionic quantum systems with single-particle access. The fermionic nature of the electron is vital to understanding a range of phenomena within solid-state physics, such as electron pairing in superconductivity, and quantum magnetism. In this context, the quantum simulator will allow, e.g. for direct measurement of ordered quantum phases and out-of-equilibrium dynamics, with access to quantities such as spin--spin correlation functions and the growth of many-body entanglement. The high-resolution imaging systems could also be used to project tailored time-varying light fields onto the atoms, allowing the removal of high-entropy regions by locally modifying the confining potential to attain very low-entropy states. Attaining these low-entropy many-particle states is one of the key challenges in our field. In summary, quantum-gas microscopes offer unprecedented access to many-body quantum systems, and they will allow us to gain an even deeper insight into the intriguing world of quantum physics that governs the properties of strongly correlated materials. Using a well-controlled quantum system to simulate other quantum systems could help resolve some of the most challenging problems scientists face in condensed matter physics and materials science, but it will also provide new insights in quantum chemistry, high-energy physics and biology. SK acknowledges funding from the EU (ERC FERMILATT, SIQS, QuProCs) and SUPA.
Cryogenic confocal microscopy is a powerful method for studying solid state quantum devices such as single photon sources and optically controlled qubits. While the vast majority of such studies have been conducted at temperatures of a few Kelvin, experiments involving fragile quantum effects often require lower operating temperatures. To also allow for electrical dynamic control, microwave connectivity is required. For polarization-sensitive studies, free space optical access is advantageous compared to fiber coupling. Here we present a confocal microscope in a dilution refrigerator providing all the above features at temperatures below 100 mK. The installed high frequency cabling meets the requirements for state-of-the-art spin qubit experiments. As another unique advantage of our system, the sample fitting inside a large puck can be exchanged while keeping the cryostat cold with minimal realignment. Assessing the performance of the instrument, we demonstrate confocal imaging, sub-nanosecond modulation of the emission wavelength of a suitable sample, and an electron temperature of 76 mK. While the instrument was constructed primarily with the development of optical interfaces to electrically controlled qubits in mind, it can be used for many experiments involving quantum transport, solid state quantum optics, and microwave-optical transducers.