Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2007.12768 · EPJ Quantum Technology

A low-noise single-photon detector for long-distance free-space quantum communication

Elena Anisimova, Dmitri Nikulov, Simeng Simone Hu, Mark Bourgon, Sebastian Philipp Neumann, Rupert Ursin, Thomas Jennewein, Vadim Makarov

Published Oct 26, 2021• 14 citations
arXivHTMLPDF

Abstract

Abstract We build and test a single-photon detector based on a Si avalanche photodiode Excelitas 30902SH thermoelectrically cooled to −100∘C. Our detector has dark count rate below 1 Hz, $500\ \mu\mathrm{m}$ 500 μ m diameter photosensitive area, photon detection efficiency around 50%, afterpulsing less than 0.35%, and timing jitter under 1 ns. These characteristics make it suitable for long-distance free-space quantum communication links, which we briefly discuss. We also report an improved method that we call long-time afterpulsing analysis, used to determine and visualise long trap lifetimes at different temperatures.

DOI
10.1140/epjqt/s40507-021-00111-0

Related papers

Single-Photon Detectors for Fiber-Optic Quantum Cryptography and Communications

Akio Yoshizawa

I review the recent progress on single-photon detectors developed for detecting 1550-nm photons. Thermoelectrically cooled single-photon detectors based on indium-gallium-arsenide avalanche photodiodes are simple to operate and are desirable for practical applications. Methods for reducing the dark count rate and after-pulsing probability are discussed. I also briefly explain the concepts of upconversion-based singlephoton detectors and ultra-low-noise superconducting single-photon detectors.

The Review of Laser Engineering•Jan 1, 2008•0 citations

Silicon avalanche photodiodes for satellite based quantum communication

Ian D’Souza

Single photons detectors are required for applications like quantum key distribution and testing Bell's inequalities. Silicon avalanche photodiodes (Si APD's) have advantages like low dark count rate. This thesis aims to experimentally characterize Si APD's under conditions experienced in low earth orbit on board a satellite and also develop supporting algorithms and simulations. \n \nIn chapter 1, I motivate the use of Si APD's as single photon detectors on a satellite. I also briefly explain the how these APD's work and the related electronics. \n \nIn chapter 2, I describe the test setup used in the laboratory at the Institute for Quantum Computing to characterize the APD's. I then explain how one goes about measuring and/or calculating the different characteristic parameters of the APD. These characteristics include breakdown voltage, output pulse characteristics, recharge time, dark counts, detection efficiency, timing jitter of APD, saturation value and afterpulsing probability. The aim of the lab characterization is to form a baseline measurement under nominal conditions before we introduce the APD to conditions of low Earth orbit. \n \nIn chapter 3, the APD's are exposed to proton radiation which is expected in low Earth orbit. Such radiation causes displacement defects in the APD's substrate and increases dark counts. Previous work [1] has shown that thermal annealing (increasing the APD temperature for a period of time) is successful in decreasing the dark count rate to operational range. It is anticipated that multiple annealing instance would be needed in operation under constant bombardment of protons. The work in this thesis explores possibility of using annealing repeatedly by alternating instances of proton irradiation and annealing. Other parameters of the APD are also under scrutiny to see if they change over the course of this experiment. A secondary objective explores if it is better to anneal only when the dark count rate drops below a threshold value or anneal after fixed intervals of time regardless of the dark count rates. A novel algorithm is also developed to analyze the afterpulsing probability. The algorithm is applied to simulated thermal count and afterpulse timetags to demonstrate its effectiveness. It is also applied to the data set drawn from the experimental tests of proton irradiation and thermal annealing to calculate the afterpulsing probability. \n \nIn chapter 4 the APD's are exposed to the vacuum conditions that they would encounter in low Earth orbit. The bracket and radiator are set to different temperatures to simulate thermal variations in orbit. The detectors are then characterized for the aforementioned parameters to ensure they are in operable range. \n \nIn chapter 5, I distinguish between the usual notion of afterpulsing probability which relates to the probability of trapping of charge carriers and the observed afterpulsing probability which differs from the former due to dead time and recharge time. I then use first principles to derive the observed afteprulsing probability as a function of charge trapping probability, charge detrapping lifetime, dead time and thermal count rate. I further go on to lay the theoretical ground work the afterpulsing algorithm developed in section 3.3.8 by deriving the analytical expression for the histogram between time differences of consecutive time tags and then justifying the linearity of the thermal region of the histogram. \n \nFinally, in chapter 6, I devise a numerical experiment where I simulated a quantum link to implement the quantum key distribution. I model the photon statistics of a weak coherent pulsed laser and the parameters of a Si APD (the one mentioned above). I then model the coincidence algorithm to determine photon coincidences and model a simple intercept and resend attack. I calculate statistical quantities of quantum bit error ratio and sifted key generation rate.

•Sep 25, 2018•0 citations

Single-photon detector for long-distance fiber-optic quantum key distribution

Naoto Namekata, Yuuki Makino, Shuichiro Inoue

We have investigated the performance of an InGaAs/InP avalanche photodiode for photon counting at 1550 nm in the temperature range of thermoelectric cooling. A quantum efficiency of 13.7% was obtained at -55 degrees C , while the dark-count probability per gate (?1 ns) was kept as small as 2.4x10(-5) . The developed single-photon detector would yield a 104.4-km fiber-optic quantum key distribution in the ideal condition.

Optics Letters•Jun 1, 2002•56 citations

Single-photon detectors for practical quantum cryptography

Alberto Tosi, Franco Zappa, S. Cova

The implementation and commercialization of quantum cryptography technologies have to face some challenges related to the development of single-photon detectors operating at 1550 nm. The main requirements are: i) high detection efficiency; ii) low noise; iii) high count rate; iv) low timing jitter. Different technologies are currently available for single-photon detection at 1550 nm, but semiconductor devices (like Single-Photon Avalanche Diode, SPAD) offer a photon detection efficiency that is inherently higher than any photocathode employed in vacuum tube detectors. Additionally InGaAs/InP SPADs can detect single photons at 1550 nm with low noise when moderately cooled by means of thermo-electric coolers. Consequently, InGaAs/InP SPAD can be the enabling technology of practical quantum key distribution (QKD) systems, provided that the maximum count rate is increased above 1 Mcps. The main limit is the afterpulsing effect that usually sets too long (< 10 μs) a hold-off time after each avalanche ignition. We present the developments achieved in InGaAs/InP SPAD device design, fabrication technology and front-end electronics, aimed at decreasing the afterpulsing effect, while not impairing photon detection efficiency and timing jitter. The new InGaAs/InP SPADs provide count rates higher than 1 Mcps and temporal response with 60 ps Full-Width at Half Maximum and very short (30 ps time constant) tail. The front-end electronics includes a wide-band pulse generator able to gate the SPAD up to 133 MHz repetition rate. Eventually, a fast avalanche-quenching scheme minimizes quenching time to less than 1 ns, thus effectively reducing afterpulsing by decreasing the total charge flowing through the junction.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 19, 2012•15 citations

Single‐photon detector for long‐distance quantum cryptography

Naoto Namekata, Yuuki Makino, Shuichiro Inoue

Abstract In order to realize long‐distance quantum cryptography based on standard optical fiber network, we have developed a single‐photon detector at 1550 nm using InGaAs/InP avalanche photodiodes (APDs). To reduce the dark count probability, APDs were cooled and operated with a Gated Passive Quenching Circuit. A quantum efficiency of 13.7% was obtained at −55 °C while keeping the dark count probability per gate (2 ns) as low as 2.4 × 10−5. In this paper we will discuss the performance of the developed single‐photon detector in view of application to quantum cryptography. © 2003 Wiley Periodicals, Inc. Electron Comm Jpn Pt 2, 86(5): 10–15, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/ecjb.10115

Electronics and Communications in Japan (Part II Electronics)•Apr 4, 2003•0 citations

Single-photon detectors for satellite based quantum communications

Nigar Sultana

With the growing use of online communications in our modern society, information security is becoming a big concern. Along with that, the progress in quantum computers is posing severe threats to such communications. Once powerful quantum computers are available, most of today's encryption schemes, which are based on computationally hard problems, will be broken within a short period. Researchers are therefore making a great effort to establish quantum-safe encryption schemes. One such scheme is quantum key distribution (QKD), which utilizes the laws of quantum mechanics. These cryptography protocols offer unconditional security to the communication between two distant parties by providing a secure way of sharing encryption keys between them. While over the last few decades QKD has continuously progressed, it is limited to a distance of up to several hundred kilometers using terrestrial quantum links. Satellites are therefore being considered to extend the QKD range for global coverage, although implementations of the satellite-based QKD infrastructure are still in their early stage. There are many aspects of QKD that need further assessment and advancement for establishing long-term satellite-based quantum communication (QC). My thesis works were focused on developing advanced systems for single-photon detectors and quantum sources. Single-photon avalanche diodes (SPADs) are the most viable option for satellite-based quantum communications. They must travel to outer space either for receiving quantum-states in the ground-to-satellite QC or for characterizing the quantum-sources in the satellite-to-ground QC. However, while in space, SPADs exhibit damage caused by the space radiation that gradually increases their dark counts. Performing QKD is not possible when the dark counts exceed a specific threshold. Hence, methods of reducing the detectors' dark counts by mitigating the damages would help to extend the SPADs' in-space useful lifetime. Laser annealing is one such effective method, found in lab experiments, to heal the radiation-induced detector damages. We now aim to carry out this method in low Earth orbit (LEO) to verify its in-orbit effectiveness. On that goal, we are building an annealing payload (APL) for a cube satellite (CubeSat) in collaboration with the University of Illinois at Urbana Champaign (UIUC). We, the University of Waterloo team, built one of the two segments of the APL-- a space-qualified detector module containing two Excelitas C30902SH and Excelitas SLiK detectors. Our miniaturized and compact module integrates the facilities required for the detector operation and laser annealing, as well as an active detector temperature control system. The operation of the detector module is highly flexible and software controllable. Our detector module will work together with the control board containing the laser annealing system (built by the UIUC team). Once the satellite has been launched in 2020, the in-orbit experiment will enable us to study the in-space SPAD radiation damage and their healing using the integrated annealing system. During a second project, we designed and built a new simple readout circuit for the negative feedback avalanche diodes (NFADs), which are free-running single-photon detectors at telecom wavelengths. These detectors suffer from strong afterpulsing effects, which limits their overall performances. Therefore, our readout system incorporates features to suppress NFAD afterpulses. We also used this custom readout to characterize two NFADs (from Princeton Lightwave) and assessed the performance of the new electronics. Our analysis showed that even at higher detection efficiencies, a 20 $\\mu$s hold-off time after each avalanche event is enough to extensively reduce the number of afterpulses and to keep the dark count rate below 100 Hz at 192 K temperature. Both the detectors showed timing jitter of less than 75 ps FWHM at their maximum efficiencies. The best figure of merit is found to be 1.6$\\times 10^7$, which is comparable to that of the high-performing superconducting nanowire single-photon detectors. This result demonstrates the suitability of our readout and the NFADs in various quantum optics applications, such as in long-distance quantum key distribution, where the detection rate is usually low. We then performed a blinding attack, which enables an Eavesdropper in QKD to gain information on the key, on these NFADs using bright illumination. These detectors are usually threshold detectors that generate a click when the optical power is above a certain threshold, otherwise they do not click. Blinding attack utilizes detectors' inability to resolve the photon numbers. During the experiment, we sent controlled optical pulses with a high time resolution to deterministically force detection at the detectors. The result demonstrated the NFADs' susceptibility to these attacks, which tells us to include countermeasures into the system to protect the communications. Finally, we built a quantum source to produce 785 nm polarized photons to implement decoy-state BB84 QKD. Our source utilized the sum-frequency generation scheme to generate 785 nm laser pulses. Its modulator system includes an intensity modulator and two-phase modulators in the Mach-Zehnder configuration to prepare polarized quantum states with different intensities. Our source provides a repetition rate of 500 MHz, which was successfully used in an airborne QKD demonstration with a moving receiver up to $10~ km$ distance. To summarize, my research projects are a contribution to the development of advanced devices, particularly single-photon detectors for quantum communications.

•Jan 23, 2020•2 citations
Abstract We build and test a single-photon detector based on a Si avalanche photodiode Excelitas 30902SH thermoelectrically cooled to −100∘C. Our detector has dark count rate below 1 Hz, 500 μm500\ \mu\mathrm{m}500 μm 500 μ m diameter photosensitive area, photon detection efficiency around 50%, afterpulsing less than 0.35%, and timing jitter under 1 ns. These characteristics make it suitable for long-distance free-space quantum communication links, which we briefly discuss. We also report an improved method that we call long-time afterpulsing analysis, used to determine and visualise long trap lifetimes at different temperatures.
Single photons detectors are required for applications like quantum key distribution and testing Bell's inequalities. Silicon avalanche photodiodes (Si APD's) have advantages like low dark count rate. This thesis aims to experimentally characterize Si APD's under conditions experienced in low earth orbit on board a satellite and also develop supporting algorithms and simulations. \n \nIn chapter 1, I motivate the use of Si APD's as single photon detectors on a satellite. I also briefly explain the how these APD's work and the related electronics. \n \nIn chapter 2, I describe the test setup used in the laboratory at the Institute for Quantum Computing to characterize the APD's. I then explain how one goes about measuring and/or calculating the different characteristic parameters of the APD. These characteristics include breakdown voltage, output pulse characteristics, recharge time, dark counts, detection efficiency, timing jitter of APD, saturation value and afterpulsing probability. The aim of the lab characterization is to form a baseline measurement under nominal conditions before we introduce the APD to conditions of low Earth orbit. \n \nIn chapter 3, the APD's are exposed to proton radiation which is expected in low Earth orbit. Such radiation causes displacement defects in the APD's substrate and increases dark counts. Previous work [1] has shown that thermal annealing (increasing the APD temperature for a period of time) is successful in decreasing the dark count rate to operational range. It is anticipated that multiple annealing instance would be needed in operation under constant bombardment of protons. The work in this thesis explores possibility of using annealing repeatedly by alternating instances of proton irradiation and annealing. Other parameters of the APD are also under scrutiny to see if they change over the course of this experiment. A secondary objective explores if it is better to anneal only when the dark count rate drops below a threshold value or anneal after fixed intervals of time regardless of the dark count rates. A novel algorithm is also developed to analyze the afterpulsing probability. The algorithm is applied to simulated thermal count and afterpulse timetags to demonstrate its effectiveness. It is also applied to the data set drawn from the experimental tests of proton irradiation and thermal annealing to calculate the afterpulsing probability. \n \nIn chapter 4 the APD's are exposed to the vacuum conditions that they would encounter in low Earth orbit. The bracket and radiator are set to different temperatures to simulate thermal variations in orbit. The detectors are then characterized for the aforementioned parameters to ensure they are in operable range. \n \nIn chapter 5, I distinguish between the usual notion of afterpulsing probability which relates to the probability of trapping of charge carriers and the observed afterpulsing probability which differs from the former due to dead time and recharge time. I then use first principles to derive the observed afteprulsing probability as a function of charge trapping probability, charge detrapping lifetime, dead time and thermal count rate. I further go on to lay the theoretical ground work the afterpulsing algorithm developed in section 3.3.8 by deriving the analytical expression for the histogram between time differences of consecutive time tags and then justifying the linearity of the thermal region of the histogram. \n \nFinally, in chapter 6, I devise a numerical experiment where I simulated a quantum link to implement the quantum key distribution. I model the photon statistics of a weak coherent pulsed laser and the parameters of a Si APD (the one mentioned above). I then model the coincidence algorithm to determine photon coincidences and model a simple intercept and resend attack. I calculate statistical quantities of quantum bit error ratio and sifted key generation rate.
The implementation and commercialization of quantum cryptography technologies have to face some challenges related to the development of single-photon detectors operating at 1550 nm. The main requirements are: i) high detection efficiency; ii) low noise; iii) high count rate; iv) low timing jitter. Different technologies are currently available for single-photon detection at 1550 nm, but semiconductor devices (like Single-Photon Avalanche Diode, SPAD) offer a photon detection efficiency that is inherently higher than any photocathode employed in vacuum tube detectors. Additionally InGaAs/InP SPADs can detect single photons at 1550 nm with low noise when moderately cooled by means of thermo-electric coolers. Consequently, InGaAs/InP SPAD can be the enabling technology of practical quantum key distribution (QKD) systems, provided that the maximum count rate is increased above 1 Mcps. The main limit is the afterpulsing effect that usually sets too long (< 10 μs) a hold-off time after each avalanche ignition. We present the developments achieved in InGaAs/InP SPAD device design, fabrication technology and front-end electronics, aimed at decreasing the afterpulsing effect, while not impairing photon detection efficiency and timing jitter. The new InGaAs/InP SPADs provide count rates higher than 1 Mcps and temporal response with 60 ps Full-Width at Half Maximum and very short (30 ps time constant) tail. The front-end electronics includes a wide-band pulse generator able to gate the SPAD up to 133 MHz repetition rate. Eventually, a fast avalanche-quenching scheme minimizes quenching time to less than 1 ns, thus effectively reducing afterpulsing by decreasing the total charge flowing through the junction.
Abstract In order to realize long‐distance quantum cryptography based on standard optical fiber network, we have developed a single‐photon detector at 1550 nm using InGaAs/InP avalanche photodiodes (APDs). To reduce the dark count probability, APDs were cooled and operated with a Gated Passive Quenching Circuit. A quantum efficiency of 13.7% was obtained at −55 °C while keeping the dark count probability per gate (2 ns) as low as 2.4 × 10−5. In this paper we will discuss the performance of the developed single‐photon detector in view of application to quantum cryptography. © 2003 Wiley Periodicals, Inc. Electron Comm Jpn Pt 2, 86(5): 10–15, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/ecjb.10115
With the growing use of online communications in our modern society, information security is becoming a big concern. Along with that, the progress in quantum computers is posing severe threats to such communications. Once powerful quantum computers are available, most of today's encryption schemes, which are based on computationally hard problems, will be broken within a short period. Researchers are therefore making a great effort to establish quantum-safe encryption schemes. One such scheme is quantum key distribution (QKD), which utilizes the laws of quantum mechanics. These cryptography protocols offer unconditional security to the communication between two distant parties by providing a secure way of sharing encryption keys between them. While over the last few decades QKD has continuously progressed, it is limited to a distance of up to several hundred kilometers using terrestrial quantum links. Satellites are therefore being considered to extend the QKD range for global coverage, although implementations of the satellite-based QKD infrastructure are still in their early stage. There are many aspects of QKD that need further assessment and advancement for establishing long-term satellite-based quantum communication (QC). My thesis works were focused on developing advanced systems for single-photon detectors and quantum sources. Single-photon avalanche diodes (SPADs) are the most viable option for satellite-based quantum communications. They must travel to outer space either for receiving quantum-states in the ground-to-satellite QC or for characterizing the quantum-sources in the satellite-to-ground QC. However, while in space, SPADs exhibit damage caused by the space radiation that gradually increases their dark counts. Performing QKD is not possible when the dark counts exceed a specific threshold. Hence, methods of reducing the detectors' dark counts by mitigating the damages would help to extend the SPADs' in-space useful lifetime. Laser annealing is one such effective method, found in lab experiments, to heal the radiation-induced detector damages. We now aim to carry out this method in low Earth orbit (LEO) to verify its in-orbit effectiveness. On that goal, we are building an annealing payload (APL) for a cube satellite (CubeSat) in collaboration with the University of Illinois at Urbana Champaign (UIUC). We, the University of Waterloo team, built one of the two segments of the APL-- a space-qualified detector module containing two Excelitas C30902SH and Excelitas SLiK detectors. Our miniaturized and compact module integrates the facilities required for the detector operation and laser annealing, as well as an active detector temperature control system. The operation of the detector module is highly flexible and software controllable. Our detector module will work together with the control board containing the laser annealing system (built by the UIUC team). Once the satellite has been launched in 2020, the in-orbit experiment will enable us to study the in-space SPAD radiation damage and their healing using the integrated annealing system. During a second project, we designed and built a new simple readout circuit for the negative feedback avalanche diodes (NFADs), which are free-running single-photon detectors at telecom wavelengths. These detectors suffer from strong afterpulsing effects, which limits their overall performances. Therefore, our readout system incorporates features to suppress NFAD afterpulses. We also used this custom readout to characterize two NFADs (from Princeton Lightwave) and assessed the performance of the new electronics. Our analysis showed that even at higher detection efficiencies, a 20 mu\\mumus hold-off time after each avalanche event is enough to extensively reduce the number of afterpulses and to keep the dark count rate below 100 Hz at 192 K temperature. Both the detectors showed timing jitter of less than 75 ps FWHM at their maximum efficiencies. The best figure of merit is found to be 1.6times107\\times 10^7times107, which is comparable to that of the high-performing superconducting nanowire single-photon detectors. This result demonstrates the suitability of our readout and the NFADs in various quantum optics applications, such as in long-distance quantum key distribution, where the detection rate is usually low. We then performed a blinding attack, which enables an Eavesdropper in QKD to gain information on the key, on these NFADs using bright illumination. These detectors are usually threshold detectors that generate a click when the optical power is above a certain threshold, otherwise they do not click. Blinding attack utilizes detectors' inability to resolve the photon numbers. During the experiment, we sent controlled optical pulses with a high time resolution to deterministically force detection at the detectors. The result demonstrated the NFADs' susceptibility to these attacks, which tells us to include countermeasures into the system to protect the communications. Finally, we built a quantum source to produce 785 nm polarized photons to implement decoy-state BB84 QKD. Our source utilized the sum-frequency generation scheme to generate 785 nm laser pulses. Its modulator system includes an intensity modulator and two-phase modulators in the Mach-Zehnder configuration to prepare polarized quantum states with different intensities. Our source provides a repetition rate of 500 MHz, which was successfully used in an airborne QKD demonstration with a moving receiver up to 10 km10~ km10 km distance. To summarize, my research projects are a contribution to the development of advanced devices, particularly single-photon detectors for quantum communications.