We propose a quantum state readout mechanism of a weakly coupled qubit in a dispersive regime. The hybrid system consists of a ferromagnetic insulator and a weakly coupled quantum system, e.g., single electron spin, in a microwave cavity. The enhancement of the measurement sensitivity is achieved by exerting torque on the ferromagnetic insulator magnetization, which compensates the damping of the system leading to an exceptional point. The proposed mechanism allows us to measure the qubit state either via the transmission of the cavity or the FMR signal of the magnetic material.
We propose a quantum state readout mechanism of a weakly coupled qubit in a dispersive regime. The hybrid system consists of a ferromagnetic insulator and a weakly coupled quantum system, e.g., single electron spin, in a microwave cavity. The enhancement of the measurement sensitivity is achieved by exerting torque on the ferromagnetic insulator magnetization, which compensates the damping of the system leading to an exceptional point. The proposed mechanism allows us to measure the qubit state either via the transmission of the cavity or the FMR signal of the magnetic material.
For some cavity-quantum-electrodynamics systems, such as a single-electron spin coupled to a passive cavity, it is challenging to reach the strong-coupling regime. In such a weak-coupling regime, the conventional dispersive readout technique cannot be used to resolve the quantum states of the spin. Here we propose an improved dispersive readout method to measure the quantum states of a weakly coupled qubit by harnessing either one or two auxiliary cavities linearly coupled to the passive cavity containing the qubit. With appropriate parameters in both cases, the system excluding the qubit can exhibit a parity-time-symmetric phase transition at the exceptional point (EP). Because the EP can amplify the perturbation induced by the qubit and the parity-time symmetry can narrow the linewidths of the peaks in the transmission spectrum of the passive cavity, we can measure the quantum states of the weakly coupled qubit via this transmission spectrum. Owing to the weak coupling between the qubit and the passive cavity, the backaction due to the measurement of the qubit can also be reduced in comparison with the conventional dispersive readout technique in the strong-coupling regime.
The techniques of microwave quantum optics are applied to collective spin excitations in a macroscopic sphere of a ferromagnetic insulator. We demonstrate, in the single-magnon limit, strong coupling between a magnetostatic mode in the sphere and a microwave cavity mode. Moreover, we introduce a superconducting qubit in the cavity and couple the qubit with the magnon excitation via the virtual photon excitation. We observe the magnon–vacuum-induced Rabi splitting. The hybrid quantum system enables generation and characterization of non-classical quantum states of magnons.
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few $\ensuremath{\mu}\mathrm{s}$ of readout time without requiring the use of Purcell filters.
We introduce a model of quantum magnetism induced by the nonperturbative exchange of microwave photons between distant superconducting qubits. By interconnecting qubits and cavities, we obtain a spin-boson lattice model that exhibits a quantum phase transition where both qubits and cavities spontaneously polarize. We present a many-body ansatz that captures this phenomenon all the way, from a the perturbative dispersive regime where photons can be traced out, to the nonperturbative ultrastrong coupling regime where photons must be treated on the same footing as qubits. Our ansatz also reproduces the low-energy excitations, which are described by hybridized spin-photon quasiparticles, and can be probed spectroscopically from transmission experiments in circuit QED, as shown by simulating a possible experiment by matrix-product-state methods.
Spin and topological-qubit based quantum computers require an easily scalable and highly sensitive method for readout and manipulation, for which Dispersive Gate Sensing (DGS) is a promising candidate [1, 2]. DGS enables sensing of single electron tunneling events in a mesoscopic system by measuring a reflected Radio Frequency (RF) signal from a resonator capacitively coupled to one of the system’s gate electrodes. From the resonator’s perspective, the system is modeled as an effective ‘parametric capacitance’ [3]. Motivated by its viability for qubit readout and control, we measure transport characteristics of a semiconducting-superconducting hybrid charge island system using this method. Doing so, we observe a spin degeneracy modulation of interdot tunnel couplings resulting from hybridization of a dot orbital with a subgap state of the superconductor, measured entirely within Coulomb blockade. Without DC measurement, we also track a subgap state’s energy via voltage intervals between island charge states as a function of field. Subsequently, we attempt to correlate changes in the resonator’s internal dissipation with coherence of tunneling into the superconducting island. In particular, we collapse a superconducting island’s lowest energy state to the Fermi level by applying a magnetic field. Contrary to expectations, internal dissipation in the resonator did not change dramatically with field, in fact decreasing at charge degeneracy points at all field strengths. We corroborate measurements with existing theory, augmented by simple analytical and numerical models demonstrating that coherence factors of superconducting quasiparticle states and the degeneracy of dot orbitals modulate parametric capacitance. A master equation model of finite temperature interdot tunneling is solved, agreeing with experimental evidence that Sisyphus dissipation is negligible when a dot orbital is hybridized with multiple independent quasiparticle states. To be employed in quantum computers, a full understanding of all phenomena contributing to a DGS signal in these hybrid systems is critical. Hence, these results mark a step towards unambiguous readout of Majorana parity in topological qubits [4].
Solid-state quantum sensors based on ensembles of nitrogen-vacancy (NV) centers in diamond have emerged as powerful platforms for high-precision metrology. Coupling the NV ensemble to a microwave cavity mode in a cavity quantum electrodynamics (cQED) configuration enables spin readout that surpasses the limitations of conventional optical detection, achieving sub-picotesla magnetic sensitivities. However, existing continuous-wave cQED approaches remain far from the intrinsic spin-projection-noise limit due to spin saturation and power broadening. Here, we introduce a dispersive cQED readout technique to overcome these fundamental limitations in NV ensemble sensing. We develop a comprehensive theoretical framework describing the dispersive interaction and analyze the time-domain dynamics of a strongly-coupled NV-cavity system. Our results indicate near-unity inverse readout fidelity and femtotesla-level sensitivity using a commercially available diamond NV ensemble. Importantly, the dispersive readout exhibits a distinct sensitivity scaling that improves as 1/N with increasing number of spins N, providing a practical pathway toward approaching the standard quantum limit for solid-state spin-ensemble sensors.