Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2003.03267

Resonant Very Low- and Ultra Low Frequency Digital Signal Reception Using a Portable Atomic Magnetometer

Stuart J. Ingleby, Iain C. Chalmers, T. Dyer, Paul F. Griffin, Erling Riis

Published Mar 6, 2020• 4 citations
arXivHTMLPDF

Abstract

Radio communication through attenuating media necessitates the use of very-low frequency (VLF) and ultra-low frequency (ULF) carrier bands, which are frequently used in underwater and under-ground communication applications. Quantum sensing techniques can be used to circumvent hard constraints on the size, weight and noise floor of classical signal transducers. In this low-frequency range, an optically pumped atomic sample can be used to detect carrier wave modulation resonant with ground-state Zeeman splitting of alkali atoms. Using a compact, self-calibrating system we demonstrate a resonant atomic transducer for digital data encoded using binary phase- and frequency-keying of resonant carrier waves in the 200 Hz -200 kHz range. We present field trial data showing sensor noise floor, decoded data and received bit error rate, and calculate the projected range of sub-sea communication using this device.

DOI
10.48550/arxiv.2003.03267

Related papers

Optimization of a Radio-frequency Atomic Magnetometer Toward Very Low Frequency Signal Reception

Hyun Joon Lee, Ye-Jin Yu, Jang‐Yeol Kim +3 more

We describe a single-channel rubidium (Rb) radio-frequency atomic magnetometer (RFAM) as a receiver that takes magnetic signal resonating with Zeeman splitting of the ground state of Rb. We optimize the performance of the RFAM by recording the response signal and signal-to-noise ratio (SNR) in various parameters and obtain a noise level of 159 fT/Hz around 30 kHz. When a resonant radio-frequency magnetic field with a peak amplitude of 8.0 nT is applied, the bandwidth and signal-to-noise ratio are about 650 Hz and 88 dB, respectively. It is a good agreement that RFAM using alkali atoms is suitable for receiving signals in the very low frequency (VLF) carrier band, ranging from 3 kHz to 30 kHz. This study shows the new capabilities of the RFAM in communications applications based on magnetic signals with the VLF carrier band. Such communication can be expected to expand the communication space by overcoming obstacles through the high magnetic sensitive RFAM.

Current Optics and Photonics•Jun 25, 2021•2 citations

Use of Optically Pumped Quantum Magnetometers as Signal Receivers in the Ultra-Long Wavelength Range

Ермак Сергей Викторович, Alexander Fedotovich Kryachko, V. V. Semenov +2 more

The operation of basic types of quantum magnetometers with optical pumping as signal receivers in the ultra-long wavelength range is demonstrated in this work. The circuit realization of an experimental setup, provides the registration of double radio-optical resonance signals, is discussed. The realized magnetometers sensitivity is tens of pT/Hz1/2at bandwidth up to 1 kHz. The comparison of the absorption resonance signals in operation modes of quantum magnetometers with and without of synchronous detection is done. Maximum frequency of magnetic signals is about 534 Hz. An estimate of the maximum receiving distance is about of 100 m. The spectrum of frequency-modulated magnetometer signal is discussed. Prospects and features for the use of quantum magnetometers as super-low-frequency signal receivers are presented.

Wave Electronics and its Application in Information and Telecommunication Systems (WECONF)•May 29, 2023•1 citation

Calibration-Free Rydberg Atomic Receiver for Sub-MHz Wireless Communications and Sensing

Minze Chen, Tianqi Mao, Wei Xiao +7 more

The exploitation of sub-MHz (<1 MHz) benefits a wide range of applications like underwater vehicular communication, subsurface exploration, low-frequency navigation etc. The traditional electrical receivers in this band are either hundreds of meters long or, when miniaturized, inefficient and bandwidth-limited, making them inapplicable for practical underwater implementations. Such obstacles can be circumvented by the emerging Rydberg atomic receiving technology, which is capable of detecting fields from DC up to the terahertz regime with compact structure. Against this background, we propose a method to detect sub-MHz electric fields without further calibration. Specifically, a physics-based model of the combined DC and AC-Stark response is established. Based on the model, we modulate the DC-Stark spectrum with the received signal and extract its amplitude by fitting the cycle-averaged, symmetric Stark-split peaks. Then we map this swing directly to the intrinsic atomic polarizability. By such operations, the proposed method can remove the dependence on electrode spacing or field-amplitude references. For performance evaluation, six-level Lindblad simulations and experiments conducted at a low-frequency field of 30 kHz demonstrate a minimum detectable field of 5.3 mV/cm, with stable readout across practical optical-power variations. The approach manages to expand the operating range of Rydberg atomic receivers below 1 MHz, and enables compact, calibration-free quantum front ends for underwater and subsurface receivers.

arXiv:2501.08787•IEEE Transactions on Vehicular Technology•Jan 27, 2026•5 citations

Prospects for magnetic field communications and location using quantum sensors

Vladislav P. Gerginov, F. C. S. da Silva, David A. Howe

Signal attenuation limits the operating range in wireless communications and location. To solve the reduced range problem, we can use low-frequency signals in combination with magnetic sensing. We propose the use of an optically pumped magnetometer as a sensor and realize a proof-of-principle detection of binary phase shift keying (BPSK) modulated signals. We demonstrate a ranging enhancement by exploiting both the magnetometer’s intrinsic sensitivity of below 1 pT/Hz1/2 and its 1 kHz operating bandwidth through the use of BPSK signals.

Review of Scientific Instruments•Dec 1, 2017•52 citations

Rydberg-atom-based digital communication using a continuously tunable radio-frequency carrier

Zhenfei Song, Hongping Liu, Xiaochi Liu +4 more

Up to now, the measurement of radio-frequency (RF) electric field achieved using the electromagnetically-induced transparency (EIT) of Rydberg atoms has proved to be of high-sensitivity and shows a potential to produce a promising atomic RF receiver at resonance between two chosen Rydberg states. In this paper, we study the extension of the feasibility of digital communication via this quantum-based antenna over a continuously tunable RF-carrier at off-resonance. Our experiment shows that the digital communication at a rate of 500 kbps can be performed reliably within a tunable bandwidth of 200 MHz near a 10.22 GHz carrier. Outside of this range, the bit error rate (BER) increases, rising to, for example, 15% at an RF-detuning of ±150 MHz. In the measurement, the time-varying RF field is retrieved by detecting the optical power of the probe laser at the center frequency of RF-induced symmetric or asymmetric Autler-Townes splitting in EIT. Prior to the digital test, we studied the RF-reception quality as a function of various parameters including the RF detuning and found that a choice of linear gain response to the RF-amplitude can suppress the signal distortion. The modulating signal can be decoded at speeds up to 500 kHz in the tunable bandwidth. Our test consolidates the physical basis for reliable communication and spectral sensing over a wider broadband RF-carrier, which paves a way for the concurrent multi-channel communications founded on the same pair of Rydberg states.

arXiv:1808.10839•Optics Express•Mar 12, 2019•181 citations

A digital alkali spin maser

Stuart J. Ingleby, Paul F. Griffin, T. Dyer +2 more

Self-oscillating atomic magnetometers, in which the precession of atomic spins in a magnetic field is driven by resonant modulation, offer high sensitivity and dynamic range. Phase-coherent feedback from the detected signal to the applied modulation creates a resonant spin maser system, highly responsive to changes in the background magnetic field. Here we show a system in which the phase condition for resonant precession is met by digital signal processing integrated into the maser feedback loop. This system uses a modest chip-scale laser and mass-produced dual-pass caesium vapour cell and operates in a 50 [Formula: see text]T field, making it a suitable technology for portable measurements of the geophysical magnetic field. We demonstrate a Cramér-Rao lower bound-limited resolution of 50 fT at 1 s sampling cadence, and a sensor bandwidth of 10 kHz. This device also represents an important class of atomic system in which low-latency digital processing forms an integral part of a coherently-driven quantum system.

arXiv:2207.11009•Scientific Reports•Jul 28, 2022•23 citations
Radio communication through attenuating media necessitates the use of very-low frequency (VLF) and ultra-low frequency (ULF) carrier bands, which are frequently used in underwater and under-ground communication applications. Quantum sensing techniques can be used to circumvent hard constraints on the size, weight and noise floor of classical signal transducers. In this low-frequency range, an optically pumped atomic sample can be used to detect carrier wave modulation resonant with ground-state Zeeman splitting of alkali atoms. Using a compact, self-calibrating system we demonstrate a resonant atomic transducer for digital data encoded using binary phase- and frequency-keying of resonant carrier waves in the 200 Hz -200 kHz range. We present field trial data showing sensor noise floor, decoded data and received bit error rate, and calculate the projected range of sub-sea communication using this device.
We describe a single-channel rubidium (Rb) radio-frequency atomic magnetometer (RFAM) as a receiver that takes magnetic signal resonating with Zeeman splitting of the ground state of Rb. We optimize the performance of the RFAM by recording the response signal and signal-to-noise ratio (SNR) in various parameters and obtain a noise level of 159 fT/Hz around 30 kHz. When a resonant radio-frequency magnetic field with a peak amplitude of 8.0 nT is applied, the bandwidth and signal-to-noise ratio are about 650 Hz and 88 dB, respectively. It is a good agreement that RFAM using alkali atoms is suitable for receiving signals in the very low frequency (VLF) carrier band, ranging from 3 kHz to 30 kHz. This study shows the new capabilities of the RFAM in communications applications based on magnetic signals with the VLF carrier band. Such communication can be expected to expand the communication space by overcoming obstacles through the high magnetic sensitive RFAM.
The operation of basic types of quantum magnetometers with optical pumping as signal receivers in the ultra-long wavelength range is demonstrated in this work. The circuit realization of an experimental setup, provides the registration of double radio-optical resonance signals, is discussed. The realized magnetometers sensitivity is tens of pT/Hz1/2at bandwidth up to 1 kHz. The comparison of the absorption resonance signals in operation modes of quantum magnetometers with and without of synchronous detection is done. Maximum frequency of magnetic signals is about 534 Hz. An estimate of the maximum receiving distance is about of 100 m. The spectrum of frequency-modulated magnetometer signal is discussed. Prospects and features for the use of quantum magnetometers as super-low-frequency signal receivers are presented.
The exploitation of sub-MHz (<1 MHz) benefits a wide range of applications like underwater vehicular communication, subsurface exploration, low-frequency navigation etc. The traditional electrical receivers in this band are either hundreds of meters long or, when miniaturized, inefficient and bandwidth-limited, making them inapplicable for practical underwater implementations. Such obstacles can be circumvented by the emerging Rydberg atomic receiving technology, which is capable of detecting fields from DC up to the terahertz regime with compact structure. Against this background, we propose a method to detect sub-MHz electric fields without further calibration. Specifically, a physics-based model of the combined DC and AC-Stark response is established. Based on the model, we modulate the DC-Stark spectrum with the received signal and extract its amplitude by fitting the cycle-averaged, symmetric Stark-split peaks. Then we map this swing directly to the intrinsic atomic polarizability. By such operations, the proposed method can remove the dependence on electrode spacing or field-amplitude references. For performance evaluation, six-level Lindblad simulations and experiments conducted at a low-frequency field of 30 kHz demonstrate a minimum detectable field of 5.3 mV/cm, with stable readout across practical optical-power variations. The approach manages to expand the operating range of Rydberg atomic receivers below 1 MHz, and enables compact, calibration-free quantum front ends for underwater and subsurface receivers.
Signal attenuation limits the operating range in wireless communications and location. To solve the reduced range problem, we can use low-frequency signals in combination with magnetic sensing. We propose the use of an optically pumped magnetometer as a sensor and realize a proof-of-principle detection of binary phase shift keying (BPSK) modulated signals. We demonstrate a ranging enhancement by exploiting both the magnetometer’s intrinsic sensitivity of below 1 pT/Hz1/2 and its 1 kHz operating bandwidth through the use of BPSK signals.
Up to now, the measurement of radio-frequency (RF) electric field achieved using the electromagnetically-induced transparency (EIT) of Rydberg atoms has proved to be of high-sensitivity and shows a potential to produce a promising atomic RF receiver at resonance between two chosen Rydberg states. In this paper, we study the extension of the feasibility of digital communication via this quantum-based antenna over a continuously tunable RF-carrier at off-resonance. Our experiment shows that the digital communication at a rate of 500 kbps can be performed reliably within a tunable bandwidth of 200 MHz near a 10.22 GHz carrier. Outside of this range, the bit error rate (BER) increases, rising to, for example, 15% at an RF-detuning of ±150 MHz. In the measurement, the time-varying RF field is retrieved by detecting the optical power of the probe laser at the center frequency of RF-induced symmetric or asymmetric Autler-Townes splitting in EIT. Prior to the digital test, we studied the RF-reception quality as a function of various parameters including the RF detuning and found that a choice of linear gain response to the RF-amplitude can suppress the signal distortion. The modulating signal can be decoded at speeds up to 500 kHz in the tunable bandwidth. Our test consolidates the physical basis for reliable communication and spectral sensing over a wider broadband RF-carrier, which paves a way for the concurrent multi-channel communications founded on the same pair of Rydberg states.
Self-oscillating atomic magnetometers, in which the precession of atomic spins in a magnetic field is driven by resonant modulation, offer high sensitivity and dynamic range. Phase-coherent feedback from the detected signal to the applied modulation creates a resonant spin maser system, highly responsive to changes in the background magnetic field. Here we show a system in which the phase condition for resonant precession is met by digital signal processing integrated into the maser feedback loop. This system uses a modest chip-scale laser and mass-produced dual-pass caesium vapour cell and operates in a 50 [Formula: see text]T field, making it a suitable technology for portable measurements of the geophysical magnetic field. We demonstrate a Cramér-Rao lower bound-limited resolution of 50 fT at 1 s sampling cadence, and a sensor bandwidth of 10 kHz. This device also represents an important class of atomic system in which low-latency digital processing forms an integral part of a coherently-driven quantum system.