Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2002.11802 · Physical Review A

Simulated randomized benchmarking of a dynamically corrected cross-resonance gate

Ralph Kenneth Colmenar, Utkan Güngördü, J. P. Kestner

Published Sep 28, 2020• 0 citations
arXivHTMLPDF

Abstract

We theoretically consider a cross-resonance (CR) gate implemented by pulse sequences proposed by Calderon-Vargas and Kestner [Phys. Rev. Lett. 118, 150502 (2017)]. These sequences mitigate systematic error to first order, but their effectiveness is limited by one-qubit gate imperfections. Using additional microwave control pulses, it is possible to tune the effective CR Hamiltonian into a regime where these sequences operate optimally. This improves the overall feasibility of these sequences by reducing the one-qubit operations required for error correction. We illustrate this by simulating randomized benchmarking for a system of weakly coupled transmons and show that while this pulse sequence does not offer an advantage with the current state of the art in transmons, it does improve the scaling of CR gate infidelity with one-qubit gate infidelity.

DOI
10.1103/physreva.102.032626

Related papers

Procedure for systematically tuning up cross-talk in the cross-resonance gate

Sarah Sheldon, Easwar Magesan, Jerry M. Chow +1 more

We present improvements in both theoretical understanding and experimental implementation of the cross resonance (CR) gate that have led to shorter two-qubit gate times and interleaved randomized benchmarking fidelities exceeding 99%. The CR gate is an all-microwave two-qubit gate that does not require tunability and is therefore well suited to quantum computing architectures based on two-dimensional superconducting qubits. The performance of the gate has previously been hindered by long gate times and fidelities averaging 94--96%. We have developed a calibration procedure that accurately measures the full CR Hamiltonian. The resulting measurements agree with theoretical analysis of the gate and also elucidate the error terms that have previously limited gate fidelity. The increase in fidelity that we have achieved was accomplished by introducing a second microwave drive tone on the target qubit to cancel unwanted components of the CR Hamiltonian.

arXiv:1603.04821•Physical Review A•Jun 24, 2016•492 citations

Procedure for reducing cross-resonance gate errors using pulse-level control

David Dañin, Felix Tennie

Abstract Current implementations of superconducting qubits are often limited by the low fidelities of multi-qubit gates. We present a reproducible and runtime-efficient pulse-level approach for calibrating an improved cross-resonance gate CR(θ) for arbitrary θ. This CR(θ) gate can be used to produce a wide range of other two-qubit gates via the application of standard single-qubit gates. By performing an interleaved randomised benchmarking sequence, we demonstrate that our approach leads to significantly lower incoherent errors than the circuit-level approach currently used by IBM. Hence, our procedure provides a genuine improvement for applications where noise remains a limiting factor.

arXiv:2303.12771•Quantum Science and Technology•Oct 21, 2024•5 citations

Effective Hamiltonian and parametric tuning for the cross-cross-resonance gate in the transmon model

Yousung Kang, Kyungsun Moon

The two-qubit entangler is one of the most important components of quantum computers. The cross-cross resonance (CCR) gate has recently been proposed and shown to operate faster than the cross-resonance (CR) gate as an iSWAP gate. However, unlike the CR gate, the CCR gate requires frequency modifications of the input microwave pulses induced by a Stark shift. We present a theoretical study on the CCR gate in the two-transmon system. Using the Schrieffer-Wolff transformation and the rotating-wave approximation, we obtain both the effective Hamiltonian and the input microwave pulse frequencies of the CCR gate. It is well known that the static $ZZ$ term degrades the performance of the CR gate in the transmon system. For the CCR gate, an additional dynamic $ZZ$ term arises from the combined coupling to the qubits by the input microwave pulses, whose strength increases as the product of the two pulse amplitudes ${\mathrm{\ensuremath{\Omega}}}_{0}{\mathrm{\ensuremath{\Omega}}}_{1}$. We perform numerical simulations using the set of parameters for the IBM Hanoi quantum processor. We show that the CCR gate has a phase tunability and that varying the relative phase of the input microwave pulses can significantly improve the gate performance. This demonstrates that the static $ZZ$ term in the CCR gate can be effectively reduced by optimizing the relative phase of the input microwave pulses.

Physical Review Applied•Jan 28, 2025•1 citation

Optimized cross-resonance gate for coupled transmon systems

Susanna Kirchhoff, Torsten Keßler, Per Liebermann +4 more

The cross-resonance (CR) gate is an entangling gate for fixed-frequency superconducting qubits. While being simple and extensible, it is comparatively slow, at 160 ns, and thus of limited fidelity due to on-going incoherent processes. Using two different optimal control algorithms, we estimate the quantum speed limit for a controlled-not cnot gate in this system to be 10 ns, indicating a potential for great improvements. We show that the ability to approach this limit depends strongly on the choice of ansatz used to describe optimized control pulses and limitations placed on their complexity. Using a piecewise-constant ansatz, with a single carrier and bandwidth constraints, we identify an experimentally feasible 70-ns pulse shape. Further, an ansatz based on the two dominant frequencies involved in the optimal control problem allows for an optimal solution more than twice as fast again, at under 30 ns, with smooth features and limited complexity. This is twice as fast as gate realizations using tunable-frequency, resonantly coupled qubits. Compared to current CR-gate implementations, we project our scheme will provide a sixfold speed-up and thus a sixfold reduction in fidelity loss due to incoherent effects.

arXiv:1701.01841•Physical Review A•Apr 30, 2018•55 citations

Impact of Spectators on a Two-Qubit Gate in a Tunable Coupling Superconducting Circuit

Tianqi Cai, Xiyue Han, Yukai Wu +7 more

Cross-resonance (CR) gates have emerged as a promising scheme for fault-tolerant quantum computation with fixed-frequency qubits. We experimentally implement an entangling CR gate by using a microwave-only control in a tunable coupling superconducting circuit, where the tunable coupler provides extra degrees of freedom to verify optimal conditions for constructing a CR gate. By developing a three-qubit Hamiltonian tomography protocol, we systematically investigate the dependency of gate fidelities on spurious qubit interactions and present the first experimental approach to the evaluation of the perturbation impact arising from spectator qubits. Our results reveal that the spectator qubits lead to reductions in CR gate fidelity dependent on ZZ interactions and particular frequency detunings between spectator and gate qubits. The target spectator demonstrates a more serious impact than the control spectator under a standard echo pulse scheme, whereas the degradation of gate fidelity is observed up to 22.5% as both the spectators are present with a modest ZZ coupling to the computational qubits. Our experiments uncover an optimal CR operation regime, and the method we develop here can readily be applied to improving other kinds of two-qubit gates in large-scale quantum circuits.

arXiv:2101.01854•Physical Review Letters•Aug 5, 2021•36 citations

Mitigation of quantum crosstalk in cross-resonance-based qubit architectures

Peng Zhao

The cross-resonance gate (cr gate) architecture that exploits fixed-frequency transmon qubits and fixed couplings is a leading candidate for quantum computing. Nonetheless, without the tunability of qubit parameters such as qubit frequencies and couplings, gate operations can be limited by the presence of quantum crosstalk arising from the always-on couplings. When increasing system sizes, this can become even more serious, considering frequency collisions caused by fabrication uncertainties. Here, we introduce a cr-gate-based transmon architecture with passive mitigation of both quantum crosstalk and frequency collisions. Assuming typical parameters, we show that $ZZ$ crosstalk can be suppressed while maintaining $XY$ couplings to support fast, high-fidelity cr gates. The architecture also allows one to go beyond the existing literature by extending the operating regions in which fast, high-fidelity cr gates are possible, thus alleviating the frequency-collision issue. To examine the practicality, we analyze the cr-gate performance in multiqubit lattices and provide an intuitive model for identifying and mitigating the dominant source of error. For the state-of-the-art precision in setting frequencies, we further investigate its impact on the gates. We find that $ZZ$ crosstalk and frequency collisions can be largely mitigated for neighboring qubits, while interactions beyond near-neighbor qubits can introduce new frequency collisions. As the strength is typically at the submegahertz level, adding weak off-resonant drives to selectively shift qubits can mitigate the collisions. This work could be useful for suppressing quantum crosstalk and improving gate fidelities in large-scale quantum processors based on fixed-frequency qubits and fixed couplings.

arXiv:2307.09995•Physical Review Applied•Nov 15, 2023•16 citations
We theoretically consider a cross-resonance (CR) gate implemented by pulse sequences proposed by Calderon-Vargas and Kestner [Phys. Rev. Lett. 118, 150502 (2017)]. These sequences mitigate systematic error to first order, but their effectiveness is limited by one-qubit gate imperfections. Using additional microwave control pulses, it is possible to tune the effective CR Hamiltonian into a regime where these sequences operate optimally. This improves the overall feasibility of these sequences by reducing the one-qubit operations required for error correction. We illustrate this by simulating randomized benchmarking for a system of weakly coupled transmons and show that while this pulse sequence does not offer an advantage with the current state of the art in transmons, it does improve the scaling of CR gate infidelity with one-qubit gate infidelity.
We present improvements in both theoretical understanding and experimental implementation of the cross resonance (CR) gate that have led to shorter two-qubit gate times and interleaved randomized benchmarking fidelities exceeding 99%. The CR gate is an all-microwave two-qubit gate that does not require tunability and is therefore well suited to quantum computing architectures based on two-dimensional superconducting qubits. The performance of the gate has previously been hindered by long gate times and fidelities averaging 94--96%. We have developed a calibration procedure that accurately measures the full CR Hamiltonian. The resulting measurements agree with theoretical analysis of the gate and also elucidate the error terms that have previously limited gate fidelity. The increase in fidelity that we have achieved was accomplished by introducing a second microwave drive tone on the target qubit to cancel unwanted components of the CR Hamiltonian.
Abstract Current implementations of superconducting qubits are often limited by the low fidelities of multi-qubit gates. We present a reproducible and runtime-efficient pulse-level approach for calibrating an improved cross-resonance gate CR(θ) for arbitrary θ. This CR(θ) gate can be used to produce a wide range of other two-qubit gates via the application of standard single-qubit gates. By performing an interleaved randomised benchmarking sequence, we demonstrate that our approach leads to significantly lower incoherent errors than the circuit-level approach currently used by IBM. Hence, our procedure provides a genuine improvement for applications where noise remains a limiting factor.
The two-qubit entangler is one of the most important components of quantum computers. The cross-cross resonance (CCR) gate has recently been proposed and shown to operate faster than the cross-resonance (CR) gate as an iSWAP gate. However, unlike the CR gate, the CCR gate requires frequency modifications of the input microwave pulses induced by a Stark shift. We present a theoretical study on the CCR gate in the two-transmon system. Using the Schrieffer-Wolff transformation and the rotating-wave approximation, we obtain both the effective Hamiltonian and the input microwave pulse frequencies of the CCR gate. It is well known that the static ZZZZZZ term degrades the performance of the CR gate in the transmon system. For the CCR gate, an additional dynamic ZZZZZZ term arises from the combined coupling to the qubits by the input microwave pulses, whose strength increases as the product of the two pulse amplitudes ${\mathrm{\ensuremath{\Omega}}}_{0}{\mathrm{\ensuremath{\Omega}}}_{1}$. We perform numerical simulations using the set of parameters for the IBM Hanoi quantum processor. We show that the CCR gate has a phase tunability and that varying the relative phase of the input microwave pulses can significantly improve the gate performance. This demonstrates that the static ZZZZZZ term in the CCR gate can be effectively reduced by optimizing the relative phase of the input microwave pulses.
The cross-resonance (CR) gate is an entangling gate for fixed-frequency superconducting qubits. While being simple and extensible, it is comparatively slow, at 160 ns, and thus of limited fidelity due to on-going incoherent processes. Using two different optimal control algorithms, we estimate the quantum speed limit for a controlled-not cnot gate in this system to be 10 ns, indicating a potential for great improvements. We show that the ability to approach this limit depends strongly on the choice of ansatz used to describe optimized control pulses and limitations placed on their complexity. Using a piecewise-constant ansatz, with a single carrier and bandwidth constraints, we identify an experimentally feasible 70-ns pulse shape. Further, an ansatz based on the two dominant frequencies involved in the optimal control problem allows for an optimal solution more than twice as fast again, at under 30 ns, with smooth features and limited complexity. This is twice as fast as gate realizations using tunable-frequency, resonantly coupled qubits. Compared to current CR-gate implementations, we project our scheme will provide a sixfold speed-up and thus a sixfold reduction in fidelity loss due to incoherent effects.
Cross-resonance (CR) gates have emerged as a promising scheme for fault-tolerant quantum computation with fixed-frequency qubits. We experimentally implement an entangling CR gate by using a microwave-only control in a tunable coupling superconducting circuit, where the tunable coupler provides extra degrees of freedom to verify optimal conditions for constructing a CR gate. By developing a three-qubit Hamiltonian tomography protocol, we systematically investigate the dependency of gate fidelities on spurious qubit interactions and present the first experimental approach to the evaluation of the perturbation impact arising from spectator qubits. Our results reveal that the spectator qubits lead to reductions in CR gate fidelity dependent on ZZ interactions and particular frequency detunings between spectator and gate qubits. The target spectator demonstrates a more serious impact than the control spectator under a standard echo pulse scheme, whereas the degradation of gate fidelity is observed up to 22.5% as both the spectators are present with a modest ZZ coupling to the computational qubits. Our experiments uncover an optimal CR operation regime, and the method we develop here can readily be applied to improving other kinds of two-qubit gates in large-scale quantum circuits.
The cross-resonance gate (cr gate) architecture that exploits fixed-frequency transmon qubits and fixed couplings is a leading candidate for quantum computing. Nonetheless, without the tunability of qubit parameters such as qubit frequencies and couplings, gate operations can be limited by the presence of quantum crosstalk arising from the always-on couplings. When increasing system sizes, this can become even more serious, considering frequency collisions caused by fabrication uncertainties. Here, we introduce a cr-gate-based transmon architecture with passive mitigation of both quantum crosstalk and frequency collisions. Assuming typical parameters, we show that ZZZZZZ crosstalk can be suppressed while maintaining XYXYXY couplings to support fast, high-fidelity cr gates. The architecture also allows one to go beyond the existing literature by extending the operating regions in which fast, high-fidelity cr gates are possible, thus alleviating the frequency-collision issue. To examine the practicality, we analyze the cr-gate performance in multiqubit lattices and provide an intuitive model for identifying and mitigating the dominant source of error. For the state-of-the-art precision in setting frequencies, we further investigate its impact on the gates. We find that ZZZZZZ crosstalk and frequency collisions can be largely mitigated for neighboring qubits, while interactions beyond near-neighbor qubits can introduce new frequency collisions. As the strength is typically at the submegahertz level, adding weak off-resonant drives to selectively shift qubits can mitigate the collisions. This work could be useful for suppressing quantum crosstalk and improving gate fidelities in large-scale quantum processors based on fixed-frequency qubits and fixed couplings.