Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1603.04821 · Physical Review A

Procedure for systematically tuning up cross-talk in the cross-resonance gate

Sarah Sheldon, Easwar Magesan, Jerry M. Chow, Jay Gambetta

Published Jun 24, 2016• 492 citations
arXivHTMLPDF

Abstract

We present improvements in both theoretical understanding and experimental implementation of the cross resonance (CR) gate that have led to shorter two-qubit gate times and interleaved randomized benchmarking fidelities exceeding 99%. The CR gate is an all-microwave two-qubit gate that does not require tunability and is therefore well suited to quantum computing architectures based on two-dimensional superconducting qubits. The performance of the gate has previously been hindered by long gate times and fidelities averaging 94--96%. We have developed a calibration procedure that accurately measures the full CR Hamiltonian. The resulting measurements agree with theoretical analysis of the gate and also elucidate the error terms that have previously limited gate fidelity. The increase in fidelity that we have achieved was accomplished by introducing a second microwave drive tone on the target qubit to cancel unwanted components of the CR Hamiltonian.

DOI
10.1103/physreva.93.060302

Related papers

Procedure for reducing cross-resonance gate errors using pulse-level control

David Dañin, Felix Tennie

Abstract Current implementations of superconducting qubits are often limited by the low fidelities of multi-qubit gates. We present a reproducible and runtime-efficient pulse-level approach for calibrating an improved cross-resonance gate CR(θ) for arbitrary θ. This CR(θ) gate can be used to produce a wide range of other two-qubit gates via the application of standard single-qubit gates. By performing an interleaved randomised benchmarking sequence, we demonstrate that our approach leads to significantly lower incoherent errors than the circuit-level approach currently used by IBM. Hence, our procedure provides a genuine improvement for applications where noise remains a limiting factor.

arXiv:2303.12771•Quantum Science and Technology•Oct 21, 2024•5 citations

Impact of Spectators on a Two-Qubit Gate in a Tunable Coupling Superconducting Circuit

Tianqi Cai, Xiyue Han, Yukai Wu +7 more

Cross-resonance (CR) gates have emerged as a promising scheme for fault-tolerant quantum computation with fixed-frequency qubits. We experimentally implement an entangling CR gate by using a microwave-only control in a tunable coupling superconducting circuit, where the tunable coupler provides extra degrees of freedom to verify optimal conditions for constructing a CR gate. By developing a three-qubit Hamiltonian tomography protocol, we systematically investigate the dependency of gate fidelities on spurious qubit interactions and present the first experimental approach to the evaluation of the perturbation impact arising from spectator qubits. Our results reveal that the spectator qubits lead to reductions in CR gate fidelity dependent on ZZ interactions and particular frequency detunings between spectator and gate qubits. The target spectator demonstrates a more serious impact than the control spectator under a standard echo pulse scheme, whereas the degradation of gate fidelity is observed up to 22.5% as both the spectators are present with a modest ZZ coupling to the computational qubits. Our experiments uncover an optimal CR operation regime, and the method we develop here can readily be applied to improving other kinds of two-qubit gates in large-scale quantum circuits.

arXiv:2101.01854•Physical Review Letters•Aug 5, 2021•36 citations

Three-qubit parity gate via simultaneous cross-resonance drives

Toshinari Itoko, Moein Malekakhlagh, Naoki Kanazawa +1 more

Native multiqubit parity gates have various potential quantum computing applications, such as entanglement creation, logical state encoding, and parity measurement in quantum error correction. Here, using simultaneous cross-resonance drives on two control qubits with a common target, we demonstrate an efficient implementation of a three-qubit parity gate. We have developed a calibration procedure based on that for the echoed cross-resonance gate. We confirm that our use of simultaneous drives leads to higher interleaved randomized benchmarking fidelities than a naive implementation with two consecutive controlled not gates. We also demonstrate that our simultaneous parity gates can significantly improve the parity measurement error probability for the heavy-hexagon code on an IBM Quantum processor using seven superconducting qubits with all-microwave control.

arXiv:2309.11287•Physical Review Applied•Mar 11, 2024•20 citations

Simulated randomized benchmarking of a dynamically corrected cross-resonance gate

Ralph Kenneth Colmenar, Utkan Güngördü, J. P. Kestner

We theoretically consider a cross-resonance (CR) gate implemented by pulse sequences proposed by Calderon-Vargas and Kestner [Phys. Rev. Lett. 118, 150502 (2017)]. These sequences mitigate systematic error to first order, but their effectiveness is limited by one-qubit gate imperfections. Using additional microwave control pulses, it is possible to tune the effective CR Hamiltonian into a regime where these sequences operate optimally. This improves the overall feasibility of these sequences by reducing the one-qubit operations required for error correction. We illustrate this by simulating randomized benchmarking for a system of weakly coupled transmons and show that while this pulse sequence does not offer an advantage with the current state of the art in transmons, it does improve the scaling of CR gate infidelity with one-qubit gate infidelity.

arXiv:2002.11802•Physical Review A•Sep 28, 2020•0 citations

All-Microwave Multiqubit Gates

Guanqi Wang, Yao Song, Peng-Bo Li +1 more

Implementing high-fidelity multiqubit gates is critical for reducing circuit depth in near-term quantum processors and fault-tolerant architectures. However, realizing multiqubit interactions and entanglement remains a critical challenge that limits the implementation of multiqubit gates. Here we propose an all-microwave scheme to realize single-step multiqubit gates incorporating n control and m target qubits, tailored for frequency-tunable superconducting transmon networks. By leveraging cross-resonance (CR) drives, this approach induces effective two-body ZX interactions that are significantly stronger than those achieved in conventional resonant regimes, circumventing the need for tunable couplers. The system's effective Hamiltonian is analytically derived using both quad frame rotation and rigorous block diagonalization. These combined theoretical methods facilitate the identification of optimal parameter regimes that simultaneously enhance desired target couplings and suppress parasitic higher-order terms, such as ZXX interactions. Through numerical simulations and gradient-based pulse-shape optimization, we demonstrate three-qubit gates achieving fidelities exceeding 99.9% within a 60 ns gate duration. Furthermore, we evaluate the fundamental scalability of this framework by extending the optimization to a five-qubit CXXXX architecture, confirming the physical viability of the multi-target driving scheme. Because these multiqubit operations naturally emulate stabilizer measurements, this architecture provides a hardware-efficient strategy for reducing the circuit depth of stabilizer-type operations by replacing sequential two-qubit gate decompositions with single-step multiqubit gates.

quant-pharXiv:2609.39834•Oct 1, 2026•0 citations

Robust Optimal Control of the Cross-Resonance Gate in Superconducting Qubits

Allen, Joseph

Superconducting circuits are one of the leading architectures in quantum computing. To undertake quantum computing one must be able to perform quantum gates; however, two-qubit gates are still limited in fidelity and gate time. The cross-resonance gate is a two-qubit gate that uses direct microwave drives and has seen much success in its implementation; but, there are theoretical indications that it has not yet reached the coherence limited fidelity value and its gate time is still relatively long compared with other quantum gate methods. Quantum optimal control theory is a powerful tool in the design of controls for quantum operations and has shown the capability to improve gate fidelities and reduce gate times. Robust quantum optimal control methodologies have further built on this to develop high fidelity quantum gates that are robust to uncertainties and noise in the system. In this thesis we use robust quantum optimal control theory to achieve these goals for the cross-resonance gate in a variety of superconducting qubit architectures. First, we investigate two superconducting qubits embedded in a common 3D microwave cavity in which the control drive is implemented via the common cavity mode of the cavity. We determine pulse shapes that implement the cross-resonance gate that are robust to uncertainty in the qubit transition frequencies for both a strictly two-level superconducting qubit and a three-level qubit. Second, we look at the cross-resonance gate with direct drives on each qubit, finding the minimal time to perform the cross-resonance gate with pulses that are robust to uncertainty in a measured system parameter for three cases: two three-level qubits with no drive crosstalk, two three-level qubits with some drive crosstalk, and two two-level qubits. Lastly, we report on simulations undertaken towards implementing a robust, high fidelity cross-resonance gate in a novel superconducting quantum device known as the coaxmon.

•Jul 15, 2019•1 citation
We present improvements in both theoretical understanding and experimental implementation of the cross resonance (CR) gate that have led to shorter two-qubit gate times and interleaved randomized benchmarking fidelities exceeding 99%. The CR gate is an all-microwave two-qubit gate that does not require tunability and is therefore well suited to quantum computing architectures based on two-dimensional superconducting qubits. The performance of the gate has previously been hindered by long gate times and fidelities averaging 94--96%. We have developed a calibration procedure that accurately measures the full CR Hamiltonian. The resulting measurements agree with theoretical analysis of the gate and also elucidate the error terms that have previously limited gate fidelity. The increase in fidelity that we have achieved was accomplished by introducing a second microwave drive tone on the target qubit to cancel unwanted components of the CR Hamiltonian.
Abstract Current implementations of superconducting qubits are often limited by the low fidelities of multi-qubit gates. We present a reproducible and runtime-efficient pulse-level approach for calibrating an improved cross-resonance gate CR(θ) for arbitrary θ. This CR(θ) gate can be used to produce a wide range of other two-qubit gates via the application of standard single-qubit gates. By performing an interleaved randomised benchmarking sequence, we demonstrate that our approach leads to significantly lower incoherent errors than the circuit-level approach currently used by IBM. Hence, our procedure provides a genuine improvement for applications where noise remains a limiting factor.
Cross-resonance (CR) gates have emerged as a promising scheme for fault-tolerant quantum computation with fixed-frequency qubits. We experimentally implement an entangling CR gate by using a microwave-only control in a tunable coupling superconducting circuit, where the tunable coupler provides extra degrees of freedom to verify optimal conditions for constructing a CR gate. By developing a three-qubit Hamiltonian tomography protocol, we systematically investigate the dependency of gate fidelities on spurious qubit interactions and present the first experimental approach to the evaluation of the perturbation impact arising from spectator qubits. Our results reveal that the spectator qubits lead to reductions in CR gate fidelity dependent on ZZ interactions and particular frequency detunings between spectator and gate qubits. The target spectator demonstrates a more serious impact than the control spectator under a standard echo pulse scheme, whereas the degradation of gate fidelity is observed up to 22.5% as both the spectators are present with a modest ZZ coupling to the computational qubits. Our experiments uncover an optimal CR operation regime, and the method we develop here can readily be applied to improving other kinds of two-qubit gates in large-scale quantum circuits.
Native multiqubit parity gates have various potential quantum computing applications, such as entanglement creation, logical state encoding, and parity measurement in quantum error correction. Here, using simultaneous cross-resonance drives on two control qubits with a common target, we demonstrate an efficient implementation of a three-qubit parity gate. We have developed a calibration procedure based on that for the echoed cross-resonance gate. We confirm that our use of simultaneous drives leads to higher interleaved randomized benchmarking fidelities than a naive implementation with two consecutive controlled not gates. We also demonstrate that our simultaneous parity gates can significantly improve the parity measurement error probability for the heavy-hexagon code on an IBM Quantum processor using seven superconducting qubits with all-microwave control.
We theoretically consider a cross-resonance (CR) gate implemented by pulse sequences proposed by Calderon-Vargas and Kestner [Phys. Rev. Lett. 118, 150502 (2017)]. These sequences mitigate systematic error to first order, but their effectiveness is limited by one-qubit gate imperfections. Using additional microwave control pulses, it is possible to tune the effective CR Hamiltonian into a regime where these sequences operate optimally. This improves the overall feasibility of these sequences by reducing the one-qubit operations required for error correction. We illustrate this by simulating randomized benchmarking for a system of weakly coupled transmons and show that while this pulse sequence does not offer an advantage with the current state of the art in transmons, it does improve the scaling of CR gate infidelity with one-qubit gate infidelity.
Implementing high-fidelity multiqubit gates is critical for reducing circuit depth in near-term quantum processors and fault-tolerant architectures. However, realizing multiqubit interactions and entanglement remains a critical challenge that limits the implementation of multiqubit gates. Here we propose an all-microwave scheme to realize single-step multiqubit gates incorporating n control and m target qubits, tailored for frequency-tunable superconducting transmon networks. By leveraging cross-resonance (CR) drives, this approach induces effective two-body ZX interactions that are significantly stronger than those achieved in conventional resonant regimes, circumventing the need for tunable couplers. The system's effective Hamiltonian is analytically derived using both quad frame rotation and rigorous block diagonalization. These combined theoretical methods facilitate the identification of optimal parameter regimes that simultaneously enhance desired target couplings and suppress parasitic higher-order terms, such as ZXX interactions. Through numerical simulations and gradient-based pulse-shape optimization, we demonstrate three-qubit gates achieving fidelities exceeding 99.9% within a 60 ns gate duration. Furthermore, we evaluate the fundamental scalability of this framework by extending the optimization to a five-qubit CXXXX architecture, confirming the physical viability of the multi-target driving scheme. Because these multiqubit operations naturally emulate stabilizer measurements, this architecture provides a hardware-efficient strategy for reducing the circuit depth of stabilizer-type operations by replacing sequential two-qubit gate decompositions with single-step multiqubit gates.
Superconducting circuits are one of the leading architectures in quantum computing. To undertake quantum computing one must be able to perform quantum gates; however, two-qubit gates are still limited in fidelity and gate time. The cross-resonance gate is a two-qubit gate that uses direct microwave drives and has seen much success in its implementation; but, there are theoretical indications that it has not yet reached the coherence limited fidelity value and its gate time is still relatively long compared with other quantum gate methods. Quantum optimal control theory is a powerful tool in the design of controls for quantum operations and has shown the capability to improve gate fidelities and reduce gate times. Robust quantum optimal control methodologies have further built on this to develop high fidelity quantum gates that are robust to uncertainties and noise in the system. In this thesis we use robust quantum optimal control theory to achieve these goals for the cross-resonance gate in a variety of superconducting qubit architectures. First, we investigate two superconducting qubits embedded in a common 3D microwave cavity in which the control drive is implemented via the common cavity mode of the cavity. We determine pulse shapes that implement the cross-resonance gate that are robust to uncertainty in the qubit transition frequencies for both a strictly two-level superconducting qubit and a three-level qubit. Second, we look at the cross-resonance gate with direct drives on each qubit, finding the minimal time to perform the cross-resonance gate with pulses that are robust to uncertainty in a measured system parameter for three cases: two three-level qubits with no drive crosstalk, two three-level qubits with some drive crosstalk, and two two-level qubits. Lastly, we report on simulations undertaken towards implementing a robust, high fidelity cross-resonance gate in a novel superconducting quantum device known as the coaxmon.