Four different quantum repeater schemes built with ensemble-based quantum memories are analyzed in order to guide experimentalists to achieve real-world implementations. The work focuses on repeaters devoid of error correction and suggests that meaningful proof-of-principle demonstrations are within reach of current technology.
Future quantum networks will enable fascinating applications such as secure communication, quantum-enhanced distributed sensing, distributed quantum computing, and accurate global timekeeping. Center to these applications is quantum entanglement distribution, whose effective distance is limited by photon loss. Quantum repeaters were proposed to extend the effective distance, but their demonstration has not been reported yet. In this thesis, we study quantum repeaters with both single-emitter based and ensemble-based quantum memories. In particular, we study the feasibility of meaningful proof-of-principle demonstrations of several quantum repeater protocols (with two-links) with photon (single-photon and photon-pair) sources and atomic-ensemble based quantum memories. We take into account non-unit memory efficiencies that decay exponentially with time, which is more realistic and accurate compared to previous treatments. We discuss implementations based on quantum dots, parametric down-conversion, rare-earth-ion doped crystals, and Rydberg atoms. Our results provide guidance for the near-term implementation of long-distance quantum repeater demonstrations, suggesting that such demonstrations are within reach of current technology.
Quantum repeaters promise to deliver long-distance entanglement overcoming loss in realistic quantum channels. A promising class of repeaters, based on atomic ensemble quantum memories and linear optics, follows the proposal by L.-M. Duan et al., Nature (London) 414, 413 (2001). Here we analyze this protocol in terms of a very general model for the quantum memories employed. We derive analytical expressions for scaling of entanglement with memory imperfections, dark counts, loss, and distance, and we apply our results to two specific quantum memory protocols. Our methods apply to any quantum memory with an interaction Hamiltonian at most quadratic in the mode operators and are in principle extendible to more recent modifications of the original proposal of Duan, Lukin, Cirac, and Zoller.
An overview will be given of various approaches to implementing a quantum repeater for quantum communication over large distances. This includes a discussion of systems and protocols that are experimentally feasible and thus realizable in the midterm in order to go beyond the current limit of a few hundred km given by direct quantum-state transmissions. At the same time, these schemes should be, in principle, scalable to arbitrary distances. In this context, the influence of various elements and strategies in a quantum repeater protocol on the final fidelities and rates shall be addressed: initial entanglement distribution, Bell measurements, multiplexing, postselection, quantum memories, and quantum error detection/correction. Solely on the hardware side, the differences in using just single quanta or instead employing many quanta for the flying (photons) and the stationary (atoms) qubits will be pointed out.
Developing and deploying advanced Quantum Repeater (QR) technologies will be necessary to scale quantum networks to longer distances. Depending on the error mitigation mechanisms adopted to suppress loss and errors, QRs are typically classified into memory-based or all-photonic QRs; and each type of QR may be best suited for a specific type of underlying quantum technology, a particular scale of quantum networks, or a specific regime of operational parameters. We perform theoretical analysis and simulations of quantum repeaters and networks to investigate the relative performance and resource requirements of different quantum network paradigms. Our results will help guide the optimization of quantum hardware and components and shed light on the role of a robust control plane. We present our research findings on theoretical analysis and simulations of memory-based first-generation trapped-ion quantum repeaters and networks, and all-photonic entanglement-based quantum repeaters and networks. We study the relative performance in terms of entanglement generation rate and fidelity, as well as the resource requirements of these two different quantum network paradigms.
This thesis is an exploration of quantum repeaters from a practical point of view. Quantum repeaters are devices which help improve the quantum communication capacity of a lossy bosonic channel (which include photonic channels such as optical fiber) beyond what is possible using a purely lossy channel. The analyses in this thesis involve modeling the experimental imperfections inherent in the various devices which comprise a quantum repeater, then combining these models to calculate various quantities of interest. \n \nTwo systems are analyzed in this thesis. One is a simple quantum repeater, while the other is a potential building block for more complex quantum repeaters. \n \nThe simple quantum repeater scheme can be implemented with currently available technology. In it, two parties perform quantum key distribution (QKD) by exchanging photons with two quantum memories placed between them. Its secret key rate ideally scales as the square root of the transmittivity of the optical channel, which is superior to QKD schemes based on direct transmission because key rates for the latter scale at best linearly with transmittivity. Taking into account imperfections in the setup, such as detector efficiency and dark counts, we present parameter regimes in which our protocol outperforms protocols based on direct transmission. We find that implementing our scheme with trapped ions is a promising way to reach the necessary parameter regimes, and that the regimes are easier to reach if the optical channels are very lossy. \n \nThe creation of entanglement between two quantum memories is an important building block in some quantum repeater schemes. We consider a specific quantum memory consisting of an atom trapped in a cavity. The system allows a CNOT operation to be performed between an atom and a photon. We study three methods for taking advantage of this to entangle two atoms: (1) interacting a coherent pulse with each atom, then performing an entangling measurement on the pulses; (2) interacting a single coherent pulse with each atom sequentially; (3) emitting an entangled photon from one atom and interacting it with the other atom. The success probability of each method is compared, as well as the quality of the entangled states produced by each one, taking into account imperfections which appear in a specific experimental implementation of such memories. We find that there is a tradeoff between success probability and entangled state quality when coherent states are used, and that method 3 provides higher-quality entangled states than is possible with the other two methods.
Quantum networking, heralded as the next frontier in communication networks, envisions a realm where quantum computers and devices collaborate to unlock capabilities beyond what is possible with the Internet. A critical component for realizing a long-distance quantum network, and ultimately, the Quantum Internet, is the quantum repeater. As with the race to build a scalable quantum computer with different technologies, various schemes exist for building quantum repeaters. This article offers a gentle introduction to the two-way “all-photonic quantum repeaters,” a recent addition to quantum repeater technologies. In contrast to conventional approaches, these repeaters eliminate the need for quantum memories, offering the dual benefits of higher repetition rates and intrinsic tolerance to both quantum operational errors and photon losses. Using visualization and simple rules for manipulating graph states, we describe how all-photonic quantum repeaters work. We discuss the problem of the increased volume of classical communication required by this scheme, which places a huge processing requirement on the end nodes. We address this problem by presenting a solution that decreases the amount of classical communication by three orders of magnitude. We conclude by highlighting other key open challenges in translating the theoretical all-photonic framework into real-world implementation, providing insights into the practical considerations and future research directions of all-photonic quantum repeater technology.